Repair works in Pearl of Periyar Barge 2024.

Amount

Replacement of damaged/dented hull plates in Pearl of Periyar barge: Scope of work includes : a) Cutting and removing damaged/dented steel plates of hull in portside of the barge. b) Fit-up and welding of new IRS grade A 8 mm plates in damaged portions of the hull. Entire welding of IRS Grade A plates to hull shall be done by IRS qualified welder. c) Carrying out NDT tests like dye penetrant test, magnetic particle test etc.. on new weld joints as per the recommendations of IRS. d) Painting two coats of primer on steel renewed regions Entire work shall be done as per special conditions of contract, general conditions of contract and as per instructions of engineer

Procurement of structural required for the repair works of the hull in Pearl of Periyar barge: Scope of work includes: a) Procurement of structural required for the repair works in hull of Pearl of Periyar barge. b) Procured structural shall be confirming to IS 2062 E 250 Gr. A or superior grade. c) Quoted rate shall be inclusive of transportation charges and loading / unloading charges Entire works shall be done as per special conditions of contract, general conditions of contract and as per instructions of engineer-in-charge

Replacement of damaged/dented structural of hull in Pearl of Periyar barge. Scope of work includes: a) Cutting & removing damaged/dented structural of hull in pearl of periyar barge. b) Fit-up and welding of new structural in damaged portions of the hull. Entire welding of the structural to hull shall be done by IRS qualified welder. c) Carrying out NDT tests like dye penetrant test, magnetic particle test etc.. on new weld joints as per the recommendations of IRS. d) Painting two coats of primer and one coat of finish paint in steel renewed regions Entire works shall be done as per special conditions of contract, general conditions of contract and as per instructions of engineer-in-charge.

Replacing damaged/dented sheer strake extension plate for holding D type fender. Scope of work includes: a) Cutting & removing damaged/ dented sheer strake extension plate. b) Fit-up & welding of new sheer strake plates. Entire welding of the new sheer strake extension plates shall be done by IRS qualified welders. c) Carrying out NDT tests like dye penetrant test, magnetic particle test etc.. on new weld joints as per the recommendations of IRS. d) Painting two coats of primer and one coat of finish paint in steel renewed region. Entire works shall be done as per special conditions of contract, general conditions of contract and as per instructions of engineer-in-charge.

Replacement of damaged D type hollow fenders in Pearl of Periyar Barge: Scope of work includes: a) Removing damaged fenders in the fenders. b) Fixing the new fenders supplied by FEW to the sheer strake of the barge. c) Fasteners required for fixing the new fenders shall be in scope of contractor. Entire works shall be done as per special conditions of contract, general conditions of contract and as per instructions of engineer-in-charge.

Bend correction of handrail, midrail and stanchions of barge: Scope of work includes: a) Straightening the bent handrail, mid rail and stanchions of the barge located at weather deck by heating and hammering b) If bend correction cannot be done by heating and hammering, bent portions shall be cut and removed and same is to be replaced with the new ones c) Plates, pipes and solid rods required for the replacement shall be in scope of contractor. Entire works shall be done as per special conditions of contract, general conditions of contract and as per instructions of engineer-in-charge.

Painting of water line to deck region of the barge: Scope of work includes : a) Cleaning of waterline to deck region of the hull by high pressure water jet cleaning b) Application of one coat of finish paint on waterline to deck region of the hull. In case of rusted regions on hull, same shall be buffed and two coats of primer shall be applied prior to application of finish paint. c) Paint & thinner required for the job shall be in scope of contractor. Shade of the applied finish paint shall be same as that of the existing shade. Entire works shall be done as per special conditions of contract, general conditions of contract and as per instructions of engineer-in-charge.

Painting of underbody of valve operating platform: Scope of work includes : a) Cleaning of underbody of valve operating platform by chipping, grinding and buffing. b) Application of two coats of primer on under body c) Paint & thinner required for the job shall be in scope of contractor. Entire works shall be done as per special conditions of contract, general conditions of contract and as per instructions of engineer-in-charge.

Painting of weather deck of the barge: Scope of work includes : a) Cleaning of rusted portions on weather deck by chipping, grinding & buffing b) Application of one coat of primer and one coat of finish paint. c) Paint & thinner required for the job shall be in scope of contractor. Shade of the applied finish paint shall be same as that of the existing shade. Entire works shall be done as per special conditions of contract, general conditions of contract and as per instructions of engineer-in-charge

Painting of handrail, midrail, stanchions and deck fittings of the barge: Scope of work includes: a) Cleaning handrail, mid rail, stanchions and deck fitting of the barge by using compressed air. b) Application of one coat of finish paint. c) Paint & thinner required for the job shall be in scope of contractor. Shade of the applied finish paint shall be same as that of the existing shade. Entire works shall be done as per special conditions of contract, general conditions of contract and as per instructions of engineer-in-charge

Painting of cargo hold bottom portion: Scope of work includes: a) Cleaning of rusted portions of cargo hold bottom portion by chipping, grinding & buffing b) Application of one coat of primer and one coat of finish paint. c) Paint & thinner required for the job shall be in scope of contractor. Shade of the applied finish paint shall be same as that of the existing shade. Entire works shall be done as per special conditions of contract, general conditions of contract and as per instructions of engineer-in-charge.

Painting of anchor chain: Scope of work includes: a) Cleaning of rusted portions of anchor chain by chipping, grinding & buffing b) Application of two coats of coal tar epoxy paint. c) Paint & thinner required for the job shall be in scope of contractor. Entire works shall be done as per special conditions of contract, general conditions of contract and as per instructions of engineer-in-charge.

Painting of miscellaneous items in Pearl of Periyar barge: Scope of work includes: # Painting of following miscellaneous items in Pearl of Periyar Barge: •Ladders to cargo hold •Base portion of supports provided for roofing sheets laid over cargo hold. •Hydraulic lines laid in cargo hold. •Fire lines Any region with rust shall be cleaned by chipping, grinding and buffing. One coat of primer and one coat of finish paint shall be applied after cleaning. Shade of the applied finish paint shall be same as that of the existing shade. Paint & thinner required for the job shall be in scope of contractor. Entire works shall be done as per special conditions of contract, general conditions of contract and as per instructions of engineer-in-charge.

Service of OEM engine service provider Scope of work includes: Providing service of OEM engine service providers ie; M/s Ashok Leyland for the periodic servicing of the main engines. Entire works shall be done as per special conditions of contract, general conditions of contract and as per instructions of engineer-in-charge.

Service of IRS class approved NDT service provider Scope of work includes: Providing service of IRS class approved NDT service provider at various stages of repair works. Entire works shall be done as per special conditions of contract, general conditions of contract and as per instructions of engineer-in-charge.

Providing tyre fenders on Pearl of Periyar Barge Scope of work includes: Providing tyre fenders on hull of the Pearl of Periyar Barge. Tyres, D shackle and hooks required for the fender shall be provided by FEW. 8 mm chain required for the tyre fender shall be in scope of contractor. If clips & U bends for mounting the tyre fender are broken same shall be either repaired or replaced. Entire works shall be done as per special conditions of contract, general conditions of contract and as per instructions of engineer-in-charge.

Providing service of marine electricians: Scope of work includes: Providing service of qualified marine electricians for carrying out electrical repair works in barge. Entire works shall be done as per special conditions of contract, general conditions of contract and as per instructions of engineer-in-charge.

MICRO TECH INDUSTRIES (BID ID -3155957)

M A ALI (BID ID -3155137)

M A Shamsudeen (BID ID -3155156)