Supply and installation of STEM Lab equipment

Amount

Projectile motion: Items should Include: Adjustable angle plate with Launcher, Height adjustable stand, metal sphere, Meter scaleItems should Include: Adjustable angle plate with Launcher, Height adjustable stand, metal sphere, Meter scale

Electricity and Magnetism Kit Working Principle – Electricity and Magnetism: This kit may be used fo a number of experiments in the field of electricity and magnetism e.g. Levitation of a pencil, A simple DC motor, Standing pencil, Jumping monkey, Fleming’s Left Hand Rule, Demonstration of the magnetic field of different types of magnets with iron filings, Demonstration of the magnetic pole of a bar magnet with compass, Galvanometer with compass, Magnetic screwdriver, Homopolar motor, Floating magnets, Motor and generator set. Product Material: Base – EVA foam and MDF along with assorted electronic parts. Working Principle: Electricity and Magnetism

CD diffraction spectrometer: Diffraction spectrometer using CD with CFL lamp.Items should Include: CD Grating, CFL lamp, mechanical mount with view port with slit, mains cable, AC 230V operated

Fleming Left Hand Rule with power source, Superior quality:Fleming's Left-Hand Rule apparatus with a polished wooden base (dim.: 23x15 cm), with two heavy disc magnets, a sturdy acrylic upper frame, and a copper wire conductor. For demonstrating electromagnetic principles with Battery Eliminator 2-12V DC, 2Amp

Fleming Right Hand Rule with power source, Superior quality :Fleming's Right-Hand Rule apparatus with a polished wooden base (dim.: 23x15 cm), with two heavy disc magnets, a sturdy acrylic upper frame, and a copper wire conductor. For demonstrating electromagnetic principles with Battery Eliminator 2-12V DC, 2Amp

Anti-Gravity Model: heavy wooden frame with steam-beach polished finish. Dimensions: 75 cm length, 10 cm height. Includes a roller of 20 cm in length and 12 cm in diameter.

Understanding series and parallel circuits Using bulb method:To understand series and parallel circuits with the help of – Bulb Apparatus to understand series and parallel electrical connection. Items should to Include: Main box with bulb arrangement bulbs board with holders, DC power supply, three 6.2 V bulb with series connection and three 6.2 V bulb with Parallel connection.), 3 ½ digit digital Multimeter. Voltage measurement across each bulb possible using digital multimeter Box should be AC230V operated. Spare bulbs to be given

The Lazy Tube model: a model designed to illustrate the concept of eddy currents induced by magnetic fields. This model should usful to effectively demonstrates the principles of electromagnetic induction and eddy current braking in a visually engaging manner.

Full Size Torso (Magnetic): tems should be of Superior quality that should be:• Made of PVC • Dissectable atleast in 15. parts. • The model includes removable lungs, heart, liver, stomach, intestines, and head. Cecum can be easily removed from the intestine for additional internal view. • The head should bistable. One-half of the brain should also be removable. The heart should be bisected as well. • Hooks and hidden magnets should be used to keep the torso together. •Should also be mounted on a base.

Flip and Learn Interactive Periodic Table (Exhibit size)Wall mounted 3D periodic table should allow student and teachers to see from distance.:This product should provide with a transparent plastic cover which allow it to save from dust and for security of detachable elements.

Make your own maze & buzzer (FUN SCIENCE DEMONSTRATION MODEL) It should be a simple buzz wire game which have to be assembled by student. So that student can understand the circuitry to do fun with the game also gain knowledge make a fun thing using a simple circuit.

Make your own flying saucer (FUN SCIENCE DEMONSTRATION MODEL):It should show how the electric bell works through a compact model which has to be assemble and which will grow interest to circuitry of any student. All items should be separately given in this entire kit.

Liveshow of rotating different lights (FUN SCIENCE DEMONSTRATION MODEL):Should be made of PVC material, LED module and motor module should be given to show the disco light or dancing led effect.

Infinite RGB light tunnel (FUN SCIENCE DEMONSTRATION MODEL): It should be based on reflection of light but in different way which will grow much more interest in any student.Should also have a circuitry so that a student need to do the circuit to see its magic.

Math Kit Junior: The Kit should contain Set of 24 following items: Solid Figure Set Wooden Geometrical Instrument Box Wooden Measuring Tape 3 meter Jug and Beaker Wall Thermometer Chemical Thermometer Kitchen Balance Geoboard one sided Wooden Counting Abacus (wooden)Dummy Clock Wooden Junior Dummy Clock Wooden Skip Counting Board Designer Fraction Pattern Making Triangle Game of place value Transparencies set of 10 Magnetic Fraction Disk Arithmetic Chart (Set of 7) PVC Chart (Set of 3) Half Meter Scale Plastic Moulds Cup Set Junior Pythagoras Theorem Wooden Marbles Trigonometric Compass

Dispersion of light experiment using prism Dispersion of light study using portable spectrometer with Prism. Items should Include: Glass Prism EDF, LED/Halogen lamp with power supply, mechanical mount with rotatable prism table, mains cable, Image stand (metal)

Switch's and Circuit on Board:Resistance 100 OHMS, DC Motor High Speed with Thumble Soldering, Big Buzzer, Robotic Button, Normal Cell Holder, Push Button with On / Off, Read Switch, Starter, Fuse Cover, LED 10mm, LDR, Bulb with Thread, Female Connection Pin Red Color, Female Connection Pin Black Color, Male Connection Pin Red Color, Male Connection Pin Black Color, Bar Magnet, Plastic Fan Propeller, MDF Circuit Sheet, MDF Base, Black Screw, Connecting Wire & Tie Belt.Product Material: Wood, plastic, Acrylic along with assortedelectronic parts Working Principle: Flow of electrons

Newton’s Cradle (Conservation of Energy/ Momentum) Newton's: Cradle with polished wooden base (dim.: 20x20 cm), supported by 30 cm high chrome-plated arcs, 2 cm dia. chromeplated 5 metallic balls, and durable nylon thread.

NEWTON COLOUR DISC , With rotating wheel on stand, electrical Newton Color:Disk with 20 cm dia. circular disk and on hard plastic base (22x14 cm). Dual power mode: battery or power supply. For illustrating color theory and light physics.

Junior ray box and lens kit: Working Principle - Laws of reflection and refraction. Light interacts with different mediums by transmission including refraction, absorption, or scattering. . The aim of this experiment should be to show the peculiarities of light when passing through different shapes of glass.Product Material: Metal, plastic, and acrylic along with assorted electronic parts. Working Principle: Laws of reflection and refraction.

Reflection of light:Based of law of reflection of light,the model show that the incident angle and reflection angle is same. This should have a protector mounted on plastic stand and a laser light is fixed and can be moved around the protector to show the incident angle and reflection angle.

FLOATING MAGNET SET:It should contain magnets and a pvc stand. It should show the repulsion property of the magnet. So it should depict a prompt look to see like magnets are floating in air. Magnets should be covered by colored pvc material for aesthetic look.

Levitation of magnet:EVA Base with Pillar (Set of 3), Pencil, Plastic Fan Propeller, Dropper with Cut, Plastic Frame with Drill, P Magnet & Ring Magnet 18mm x 3mm

Reflection of Light Kit:Half Protractor, Acrylic Mirror, Laser Light, Dhoop Bhatti Cone, Glue Drop & Graph Paper A4.Product Material: Plastic Working Principle: The law of reflection of light

REFLECTION WITH TWO MIRROR AT Angles:The mirrors should reflect the reflections of other mirrors within 180 degrees of the mirror’s face. Working Principle: Law of reflection of light.

OPTIC FIBRE- TOTAL INTERNAL REFLECTION KIT :The aim of this experiment should be to demonstrate the concept of total internal reflection and critical angle Product Material: Plastic Working Principle: Total Internal Reflection

Parallel Connection:Product Material: Base – EVA foam and MDF along with assorted Product Material: Base – EVA foam and MDF along with assorted

Hydraulic Arm Lift:DIY kit should able to familiar the students with working principle of a hydraulic lift, verify and co-relate the theoretical aspects of Pascal’s Law while experimenting with it.

DIY Board for Series Connection: MDF Base & EVA Base. Product Material: Base – EVA foam and MDF; along with assorted electronic parts. Working Principle: Flow of electrons

Maglev fan car Kit must contain: Thermoforming Track & Trunk, Magnetic Strip Small, Magnetic Strip Big, Plastic Fan Propeller, DC Motor with High Speed, Cell Holder with On / Off, EVA Holder, Double Sided Tape, Safety Scissor. Plastic Base Track, Plastic Base Car, EVA Motor Holding Sheet, Fan Propeller, Magnetic Strip, DC motor, Battery holder, AA cells

Demonstration of Pressure - Working Model of Tornedo: This model is to be made up of plastic having a base duly fitted with magnetic and electronic components. It should be a working model with a magnetic starrier with it.

Dual Pendulum: MDF Base Lower, MDF Base Upper, MDF Stick, Pendulum with Small Hook, SS Chain, Small Close Hook, S Hook & Plastic Strip with 4 Hole. Product Material: MDF, acrylic, and metal Working Principle: Forced oscillations

DIY Board for Resistance In Series and Parallel: Product Material: Base – EVA foam and MDF along with assorted electronic parts. Working Principle: Flow of electrons

Fluid Turbine: This kit should able to demonstrate how fluid can be used to produce hydroelectricity. Working Type: Manually controlled Product Material: Metal and Plastic Working Principle: Conversion of Potential energy to electric energy

Lens n light Ray box DIY kit: The aim of this Science kit should be to show the peculiarities of light when passing through different shapes of glass. List of experiments may performed with the kit should be: 1. Refraction by a semi-circular block 2. Total internal reflection using semi-circular block experiment 3. Refraction by a rectangular block 4. Refraction by prisms 5. Light Pipes 6. Concave lenses 7. Convex lenses 8. Human EyePhysics. All lenses should be made up of Acrylic and ray boxes made up of Plastic with 3 rays slites. Ray Box with Coating, Battery Snapper, Plastic Comb, Plastic Moulding Comb, Lenses (Set of 8), LED, Connecting Wire & Sleeves

DIY Board for Working of Switch: MDF Base , EVA Base , Normal Cell Holder, Circle Golden Thumble, Nut & Bolt with Washer, Bulb Holder, Bulb with Thread, Copper Strip with 1 Side Hole, Connecting Wire Plastic Container & Screw Driver Product Material: Base – EVA foam and MDF along with assorted electronic parts Working Principle: Interrupting the Flow of Electrons

Working of Hydraulic to move Arm : MDF Scale, Syringe 5ml, Fly Nut, Bent Metal Rod, Small Stopper, Tie Belt, Transparent PVC Pipe & MDF Jaws

Newton 3rd law model Car :The model should contain the following items for ease of use and understanding :Balloon Medium Size, Small Wheel with Black rubber PVC Bush, Large Wheel with Black PVC Bush, Rectangular Sheet , Rubber Band, Hard Straw, Metal Rod & EVA Side

Balancing Gyroscope: Balancing Gyroscope, the kit must contain Plastic White Disk, Plastic Black Disk, Newton Disk Sticker, DC Motor with High Speed, Silica Gel Sachet, Cell Holder with On / Off, Locking Assembly for DC Motor, Black Screw, Plastic Base, Plastic Pillar Right Side & Left Side.To make the students well versed with the principle of conservation of angular momentum.

Newton second law Motion Car: Product Material: EVA foam, acrylic, and MDF Working Principle: Speed, Velocity And Acceleration

DIY Trebuchet model Product Material: Plastic Working Principle: Newton’s Third Law of motion

Archimedes Principal with balance: Plastic Hanger HL, Plastic Base Sheet HL, P Magnet, Plastic Nozzle, Plastic Pan Balance with Hanger, DC2P, Crazy Ball, Archimedes Sticker, Beaker, Plastic Glass WF Large Stopper without Hole

Wooden Maxwell's Wheel: MDF Base Lower & Upper, MDF Roller & Thread Roll.Product Material: MDF, and metal Working model of potential energy

DIY Board for Working of A Resistance Product Material: Base – EVA foam and MDF along with assorted electronic parts. Working Principle: Flow of electrons

DIY Board for Variable Resistance Graphite Product Material: Base – EVA foam and MDF along with assorted electronic parts. Working Principle: Flow of electrons

Generator with Pulley Product Material: EVA foam, Plastic, metal, and paper tube Working Principle: Faraday’s laws of electromagnetic induction

Solinoid Engine: The DIY kit depicts the principle stated as following : should refer to any device that converts a electrical energy to mechanical energy using a solenoid.

Potential Energy In Twisted Elastic: EVA Base, MDF Stick, Plastic Propeller, Rubber Band & Plastic Chimney.Product Material: EVA foam, MDF and plastic Working Principle: Newton’s Third Law of motion

Fidget Generator: Copper Wire 34 Gauge, MDF Base, MDF Copper Coil Frame, Big Nut & Bolt, LED, Neodynium Magnet, MDF Spinner with 6 Hole, Coloured Wooden Stick, MDF LED Holder, Ball Bearing & MDF U Shape Rotator. Product Material: MDF and metal Working Principle: Faraday’s law

RGB Torch Cubes: Normal Torch, Plastic Translucent Cubes, RGB LED, Butter Paper

Axel and Gear Generator: MDF Base, MDF Pillar, MDF Vertical Sheet, MDF Copper Coil Frame, Blue Gear Small, Blue Gear Large, Axle Rod (Small & Large), Axle Metal Stopper, Copper Wire 34 Gauge, Axle Plastic Spacer, Plastic Knob, Nut Bolt & Washer, LED, Neodynium Magnet, MDF Ring & Cable Tie Base

Gear Motor Car: Working Type: Manually controlled Product Material: Metal and Plastic Working Principle: Conversion of Electric Energy into Mechanical Energy

MICROSCOPE BINOCULAR LED Light : MICROSCOPE BINOCULAR LED Light 2 paired eyepiece, with 4 objective 4x, 10x, 45x, 100x oil immersion. & fitted with mechanical Stage. Eye Piece : WF 10x/16mm Paired Illumination by built in LED Light with intensity controller Sample Preparation KIT,Superior Qualty Prepared Slides and Plain Slides

HUMAN DIGESTIVE SYSTEM: Model on Board Model should be made of a high-grade synthetic polymer having long durability. Mounted on a sturdy wooden frame for easy display. Size: Model on Board 30” X12”30”X12”

Eye With Orbit: The model should be made of PVC Mounted on a plastic stand 6 times enlarged Model The different parts of the eyeball model should be detachable Tunica external: showing cornea and sclera with attachments of ocular muscles and optic nerve. Tunica media: showing the iris, the culinary body, and the choroids Tunica internal is retina. Refraction media: showing the lens and the vitreous body

HUMAN BRAIN : 8 Parts Dissectible (On Base) Model should be • Made of PVC plastic. • Dissectible into 8 parts. On base. • Size: 18.5×14×13.5cm. • External features of the brain: cerebral hemisphere, brain stem, cerebellum. • The arterial supply of the brain: sources, vertebral, internal carotid arteries, arteria supply of the cerebellum and cerebrum.

HUMAN EAR JUMBO Ear: • Dissectible in atleast 6 parts. • Made of PVC Plastic.

HUMAN CIRCULATORY SYSTEM: Model on Board 30"X12"• Size: Model on Board 30"X12" • Model should show following anatomical structures: Arterial and venous system, Heart showing chambers, Liver, Spleen, Lung, Kidneys, Partial skeleton. • Mounted on a wooden base

HUMAN NERVOUS SYSTEM, Imported Model on Board 30”X12”: This model, measuring 30” x 12”, should made from durable HSP resin and should designed to be half lifesize for easy visualization. It shold provide a schematic representation of the nervous system, showcasing the spinal nerves that radiate from the central nervous system to different parts of the body. The model should mounted on a sturdy wooden baseboard, ensuring stability during study sessions. model should also include around 40 features marked with Key card / Manual

HUMAN RESPIRATORY SYSTEM Imported Model on Board 30”X 12”: Model should be • Size : 30"x 12" • Made of HSP resin. • Well illustrated and informative. • Half of the model should display nasal cavity, oral cavity, trachea, bronchia, bronchial tree in pulmonary lobe, right and left lungs cut open, heart in situ, pulmonary blood vessels and diaphragm with muscles attached to it. • Onother half of the modle should show enlarged pulmonary acinus displaying pulmonary alveoli, alveolar saccules, bronchial artery and veins and alveolar capillary network. • Should be Mounted on wooden sturdy base board.

HUMAN REPRODUCTIVE SYSTEM MALE, Model on Board - 30"x 12": Model should be • Size : 30"x 12" • Made of HSP resin • One half part shold show median section the system. • Internal organs (accessory organs) shown in great detail are epididymis, vas deferens, ejaculatory ducts, urethra, seminal vesicles, prostate gland and bulbourethral gland. • External structures should show are penis, scrotum and testicles. •other half shold show the model of scrotum and contents alongwith the penis. • Around 40 features should mark with Key card / Manual

DNA Hellix MODEL on Stand : • Stands 40cm tall • Made of Plastic • Mounted on stand. • 18 layers, 9 each of AT & GC. • Handy demonstration model of DNA helix. • Parts are colour coded and represent purines , pyrimidines, deoxyribose & phosphate groups that make up the double helix of DNA. • Model is great teaching tool. • Key card / Manual provided.

Photosynthesis Apparatus For the measurement and collection of gas evolved by aquatic plants during photosynthesis. The gas evolved can be measured by the calibrated capillary tube and drawn off for analysis by the plastic syringes. Apparatus should be: • Mounted on a plastic panel • Apparatus measures approximately 7.5" wide by 6" tall. • Apparatus is approximately 7" tall. Each vessel is approximately 1" in diameter • Stand should approximately 4.75" tall, 8.5" wide and 4.5" long.

HUMAN REPRODUCTIVE SYSTEM FEMALE, Model on Board - 30"x 12": Model should be • Size : 30"x 12" • Made of HSP resin • One half model shows both ovaries, left ovary in section, fallopian tubes with fimbriae, uterus, cut open vagina to show vaginal folds and cervix, bladder with cut open urethra, labia and rectum. • Other half model shows adnexa of uterus. • Around 50 features should mark with Key card / Manual.

Lungs model :Volta Meter Cup, Y Tube, Transparent Pipe3mm, Large Balloon, Rubber Bands, Cork No.should range between 7-8 with Hole & Medium Size Balloon

Snow Making Kit: Food Color, Plastic Spoon, Hand Gloves, Plastic Box, Dropping Bottle & Gumming Sticker

Magic Sand : This magic sand should be such that when put in water does not get wet but can be taken out of water completely dry Product Material: A set of chemical and plastic. Working Principle: hydrophobic sand

Water Filter Kit EVA Circle:, MDF Base, Plastic Glass (TW), Large Stopper, Finer White Sand, Bigger Granules, Cotton, Activated Charcoal, Filter Paper, Medium Size Stopper & Normal Spoon

Fire proof Balloons: Product Material: Rubber and plastic. Working Principle: Flashpoint of substances

Solutions, Suspensions And Colloids: Normal Spoon, EVA Base, Sunboard Radar, Sugar, Corn Starch, Empty Plastic Container Laser Light & Coconut Oil

Presence of Hydrogen and Oxygen in water: Plastic Bell Jar, MDF Base, MDF Pillar, Bent Metal Rod, Battery Snapper, Alligator Clip Male & Female, MDF Holder, EVA Ring with 2 Hole, EVA Big Circle, Medium Size Stopper, Syringe, T Light Candle & Pinch Clip

ATOMIC MODEL SET: This set should consist of molded balls of different colors & sizes along with connectors of different sizes. The sizes & shapes of the balls & connecting lugs should have been designed in accordance with internationally acceptable standards. Material: Polystyrene

NUTRIENT TESTING KIT : Product Material: A set of chemicals, EVA foam, Plastic, and Glass Working Principle: Colour changes in a solution to show the presence of Fats, Proteins, and Carbohydrates

COATING OR ELECTROPLATING: Product Material: MDF, plastic, metal, and a set of chemicals Working Principle: Electroplating

Capillary Action: Tissue Paper, Dropping Bottle, Liquid Food Color

Measuring pH level: pH Strip, Vinegar, Sodium Hydroxide Pellets, Dropping Bottle, Empty Plastic Container & Dropper

Weather Station: WEATHER STATION With Instruction Manual, Anemometer, Hygrometer , Thermometer , Rain Gauge

Phases of Moon (Electic Model): The Phases of Moon electrical model with dimensions are 29cm in length, 17cm in width, and 18cm in height. Crafted from durable, multicolored hard plastic, this model should able to vividly illustrates the different phases of the moon throughout its lunar cycle. It should be resource for learning about celestial phenomena.

Day and Night Apparatus (Electic Model): The Day & Night Apparatus (Electrical Model) with dimensions of 24cm in length, 13cm in width, and 20.5cm in height, . Crafted from sturdy multicolored hard plastic, this apparatus demonstrates the concept of day and night cycles. It likely features a rotating globe or similar mechanism to simulate the Earth's rotation around its axis, coupled with a light source to represent the Sun. This interactive model should offer a visual aid for understanding the Earth's rotation and its impact on the occurrence of day and night.

Solar/Lunar Eclipse: Solar lunar model should eclipse model, made of durable plastic, features a central sun emitting light. An Earth model orbits it, connected to a smaller moon. Through a gear system, the Earth rotates, causing the moon to move. This dynamic simulation should able to vividly illustrates lunar and solar eclipses in a compact 27 x 14 x 21 cm size.

Seasons Apparatus (Electrical Model): A season apparatus electrical model demonstrates the Earth's tilt and orbit around the sun, and how these factors cause seasonal changes and weather patterns. The model often includes four globes representing the Earth, which revolve around the sun on a cross. A Bakelite disc with images of the seasons and cardinal points should attached to the cross, and an electric bulb should represents, the sun. The model may also include a moon that revolves around the Earth L- 32cm W- 23 H- 19cm Multicolored, Hard plastic

Soil testing kit: The soil testing kit for the estimation of nitrogen (N), phosphorus (P), potassium (K), and pH levels should, comprise four individual sets, each containing ten tests. It should provide comprehensive analysis capabilities for assessing soil nutrient content and acidity.

DIGITAL SOIL THERMOMETER: Features should be included: 1. Measure the light intensity of the current environment. 2. Measuring the moisture content of the soil. 3. Measure the temperature of the soil: Temperature measurement range: -9~+50° C (16~122° F) 4. Measure the pH of the soil, PH measurement range:3.5-9.0 5. Working temperature: +5° C ~+40° C 6. Size: 122mm*63mm*36mm 7. Light Weight 8. Large screen - LCD user interface, LED backlight - assisted illumination for easy reading 9. Metric inch temperature conversion function 10. Low battery alert function

ILLUMINATION 2 IN 1 GLOBE :Globe should be show the physical map but as soon as light is switched on they become political. It should be: • Illuminated, Size 30cm Dia, 48cm High • Shold More than 4000 locations. • Time dial at the North Pole. • Unlit position shows Physical features. • Lit position shows Political features. • Must be Certified by Survey of India.

Concept on Electric Generator (FUN SCIENCE DEMONSTRATION MODEL): This kit should contain different type of electronic part ,where anyone can see the dynamo and make circuit through dynamo. Anyone should be able to make different circuit using dynamo.

How timer works (FUN SCIENCE DEMONSTRATION MODEL):This kit should contain different type of electronic part ,where anyone can see the dynamo and make circuit through dynamo. Anyone should be able to make different circuit using dynamo.

Tablet with all Tutorial Videos: 22.05 cm (8.7inch) Immersive Display (1340 X 800 pixels resolution) with an elegant slim bezel, 80% screen-to-body ratio for the best viewing experience Dolby Atmos Speakers Long-lasting 5,100 mAH battery with fast adaptive charging 3 GB RAM, 32 GB Internal Memory (expandable to 1 TB) 8 MP Rear Camera, 2 MP Front-facing Camera, Powerful MT8768T processor for a best-in-class multi-media experience

Truss structure to make bridge: The aim of this experiment should be to make a triangular and square structure to test their strengths and then to show the process of construction of a simple truss bridge using a set of beams connected to form a series of triangular structures. The product must consist of Plastic Beam Set of 22, Axle Rod with Thin Pipe Set of 7, Small Stopper 14 Piece.Product Material: Plastic, Rubber, Metal Working Principle: Strength and stability of a triangular structure

DIY innovative bubble machine (FUN SCIENCE DEMONSTRATION MODEL) It should be a simple motor a fan based kit. Which need to assemble. Bubble should be produced by the machine automatically. Made of PVC and should be easy and fun for any student to get the know of work of motor.

Digital Thermometer:Low battery sensation and display The memory of the last measure 15 minutes auto shutdown for power saving Operating Temperature (°C): -50 to +300

DIY LOOM FOR FIBRE TO FABRIC: Product Material: MDF and plastic Working Principle: Interlacing yarns

DIY SUNDIAL MAKING KIT: Product Material: EVA foam. Working Principle: Sun’s apparent motion in the sky

Industrial Lift Gear Model : Working Type: Manually controlled Product Material: Metal and Plastic Working Principle: Conversion of Electric Energy into Mechanical Energy

Wind Mill : Working Type: Manually controlled Product Material: Metal and Plastic Working Principle: Principle of conservation of mass and momentum.

Wind Power Dynamo: Working Type: Manually controlled Product Material: Metal and Plastic Working Principle: Faraday’s Law

Bi-Cycle Dynamo: A bicycle dynamo : a device should be such that, it may uses the rotation of the bicycle wheel to generate electricity. It is usually used to power lights on the bicycle, but can also be used to charge batteries or power other electrical devices.

Solar Reading Lamp : MDF Base Set of 2, MDF Vertical Pillar, MDF Vertical Pillar, MDF Pillar, Solar Panel, LED Panel, Battery Cell Rechargeable, Robotics Button, Connecting Wire, MDF Circular Base, Male & Female Pin MDF Connecting Holder

Hand Battery: A hand battery, a device that uses a chemical reaction to convert chemical energy into electrical energy. It should consist of two metal plates, such as zinc and copper, immersed in an electrolyte solution, such as an acid or a base, and separated by a porous material. When an electrical current will be applied to the plates, an exchange of electrons should occur, resulting in the release of energy.

PARALLEL MIRRORS WORLD: Product Material: Acrylic, EVA foam, and cardboard Working Principle: Reflection of light

Shadow with RGB: EVA Base with Hard Board, EVA LED Pillar, Cell Holder with On / Off, RGB LED & Sleeves.Product Material: EVA foam, cardboard along with assorted electronic parts Working Principle: Composition of white light

Friction free dancing fan : MDF Base, MDF Circle, EVA Base, EVA Circle,Pencil, Dropper 1ml with Cut, Plastic Propeller Fan, Ring Magnet, Speaker Magnet, Plastic Long Stick VW, & Tich Button.Product Material: EVA foam, MDF, plastic and metal Working Principle: Repulsion in similar poles of magnets

Math Kit Senior: The Kit should contain Set of 20 of following items: Geoboard two sided wooden Magnetic Fraction Disk Pythagoras Theorem Wooden Marbles Dummy Cheque Book and pay in Slip Mensuration Kit Derivation of Pie Wooden Optical Square Cross Vertical Staff Vernier Calliper Student Time Indicator Measuring Tape 3 meter Rain Gauge Magic Ring – Angle in a circle Cup Set Polyart Chart (Set of 5) Upper Primary Chart (Set of 15) Interlocking Cubes Thedolite Model Octant 3-D Wooden

Robo Car: Working Principle – Conversion of Electric Energy into Mechanical Energy. This should be a kit for making a robotic car that can be controlled with an electric switch. Product Specifications Working Type: Manually controlled Product Material: Metal and Plastic.

Robo Conveyor Machine : Working Principle – Conversion of Electric Energy into Mechanical Energy. With this kit student should able to make to study the functioning of conveyor belts which are commonly used at airports, bus stands, and metro stations to convey luggage.

Robo Air Car : Working Principle – wind energy to mechanical energy

Robo Kits Junior 1 : This kit should be such that 1. Its is easy to understand 2. It helps in understanding basic mechanics 3. Students can make different types of prototype models like: • Table Fan Bot • Remote Controlled Robotic Automobile • Robo - Crane • Robo - Soccer • Tricycle • Catapult • F1 Race Car • Helicopter Kit should Contain: Remote Control x1, Power Distribution Board x1, Adaptor 12V 1A x1, Data Cable x1, Motor x2, 60T Gear x2, 35T Gear x4, Wheel x4, Small Bar x4, Med. Plate x2, Small Plate x2, Big L x2, Small C x2, Big C x2, Small L x4, Small Shaft x4, Caster Strip x1, Spanner x1, Screw Driver x1, Caster Wheel x1 Nuts & Bolts Box With: Motor Shaft x2, 12T Gear x4, Hook x1, Shaft Locker x4, Tiny L x4, C Holder x2, Axle Lock x10, Bolt 1.5" x5, Bolt 0.5" x25, Nut x30, Spacer x20, Caster Nut & Bolt x3

Robo Kits Junior 2: This kit Should have Remote control (Must be with DPDT Switches with option for 2 Switch and 4 Switch mode) Data Cable, Power Distribution board with RJ 11 Connector and should have plastic casing base, 60, 35 & 12T Teeth Spur Gear, Wheels attachable with Track Belt, Track Belt, Bolts, Pulley, Different Size Gears, 150 RPM BO Motor with RJ 11 Connector, Metal Plates, Nuts, Bolts, Motor Shafts, Axel Lock and contains various mechanical parts which can be assembled by the students. This kit helps in understanding the science concept like mechanics, laws of physics, etc. Students should be able to make different types of prototype models like: • All Terrain Rover • Steering Car • Super Bike • Dump Truck • Robotics Hand • Pick & Place Bot • Hexapod • Robo Tank • Robo Soccker Kit Should Include Following parts with quantity & size: Remote control x1 (With plastic Casing top & Bottom), Power Distribution Board x1 (4 RJ connector for Motor & Plastic base with 5 holes both side), Adaptor 12V 3A x1, Data Cable x1, Motor x4, Plastic 60T Gear x4, Plastic 35 T Gear x4, Plastic Big Rack Gear x1, Plastic Small Rack Gear x2, Plastic Wheel x4, Metal Big Plate x2, Metal Medium Plate x2,Metal Small Plate x2, Metal Small Bar x6, Metal Big L x2, Metal Big C x2, Metal Small C x4, Metal Small L x4, Metal Slider x2, Metal Long Shaft x2, Metal Small Shaft x10, Metal Arc Clip x4, Metal Caster Strip x1, Metal Spanner x1, Metal Caster Wheel x1, Chain Link x60 ,Chain Bolt x60, Plastic Motor Shaft x4 , Plastic 12 T Gear x6, Plastic Pulley Square Hole x1, Plastic Hook x1, Plastic Shaft Locker x6, Metal Tiny L x4, Metal C Holder x2, Metal Axle Lock x20, Bolt 1.5” x10, Bolt 0.5” x40, Nut x50, Plastic Spacer x40

Robo Kits Senior : The kit should be such that 1. It should easy to use 2. Help to understanding basic electronics concepts 3. Students should able to design various prototypes on bread boards 4. Hands on Soldering and Desoldering techniques 5. Students should able to design various prototypes like: • Manual Robotic Car • Basic LED Glowing Circuit • LED glowing using Push Button • Fading LED using potentiometer • Darkness Activation System using LDR • Light Activation using System LDR • Transistor as a Not Gate • Transistor as a Touch Switch • LED Blinking using 5 5 5 Timer • Designing IR Sensor on Breadboard • Designing Motor Driver on Breadboard • Designing IR Sensor on Zero PCB • Designing Motor Driver on Zero PCB • Line Follower Robot Kit must Contains: 1x Chassis, 2 Meter Rainbow wire, 1x Bread Board, 2x Motor, 5x Berg Strip Male, 4x Single Stand Wire, 1x 555IC, 1x Flux, 2x DPDT Switch, 25x F-F Wire, 1x L293D, 1x Solder Wire, 1x Solder Stand, 1x Transistor, 4x IR LED & Photodiode, 4x Push Button, 5x 10K Ohm Resistor, 5x 150k Ohm Resistor ,20x 1K Ohm Resistor, 4x Green Connector, 1x 7805, 1x Desoldering 1x LDR Wick, 2x Wheel, 1x Wire Striper, 1x Caster, Wheel, 1x IC Base 16 Pin, 2x IC Base 8 Pin, 1x Solder Iron, 1xScrew Driver, 2xDC Jack, 2x LM358, 1x Buzzer, 5x Nuts & Bolts, 2x Zero PCB, 4x Pot, 2x Battery Cap, 2x DC Pin with Battery Cap, 1x Solder Gloves, 2x On/Off Push Switch, 10x LED Red, 5x LED Yellow, 5x LED Green, 5x LED Blue, 1x Manual.

TANK WITH ROBOTIC ARM : DIY kit to facilitate making own tank having similar tracks. The kit should include a robotic claw that opens and closes with the help of a 12V motor and also should have a 12V motor controlling the up-down movement of the arm and two 12 V motors for moving the tank too and fro. Product Specifications Working Type: Manually controlled Product Material: Metal and Plastic Working Principle: Conversion of Electric Energy into Mechanical Energy

3D Printer with Filament (With wooden/ glass cover) : Printer Type: FDM (Fused Deposition Modelling), Minimum Dimensions: 160mm *160mm *160mm, Build Size or 4 litre Build Volume., Nozzle: 0.3mm to 0.4mm nozzle diameter, slicing software should be free or Open source, LCD Screen UI that display print metrics, Good Heated Print bed. Material Compatibility - PLA, ABS, and derivatives of PLA, Ninjaflex Quality Anti-bacterial/fungal Cover. Repair Kit - with spare springs, screws, keys, tweezers, etc. Filament material: PLA , Filament weight : 03 Kgs (approx) Printer must be covered by wooden/glass cover to save it from dust

Drone Kit : Special Feature: Altitude hold, real-time image transmission, best possible videos and pictures Video Capture Resolution: 1080p Connectivity Technology: Wi-Fi, USB Maximum Range: 60 meters Material: Plastic, Acrylonitrile Butadiene Styrene Remote Control Dimensions: 10 x 10 x 8 cm Weight: 200 g (approx.)

Binocular : Product should be light weight and of superior built quality with maximum 10x magnification and 10x optical zoom.Actual viewing angle should be atleast 5.7 degrees

Mapology - India's Space Odyssey: • ROCKETS & SATELLITES MODEL MAKING SETS: This activity set should contain 65 Rocket & Satellite model making pieces to make 4 successfully launched Rockets like RH75, SLV-3, PSLV and GSLV MKIII and Satellites like Aryabhata, Chandrayaan 1, Mangalyaan, the Vikram Lander and the Moon Rover (Pragyan) • DUAL SIDED PUZZLE: The activity set should also include a dual sided puzzle - one side represents space orbits while the other side of the puzzle represents fun facts like the fact that PSLV rocket created a World Record of putting 104 satellites on a single mission

SOLAR CAR : Make use of solar panels to produce energy to drive robotic car. Working Type: Manually controlled Product Material: Metal and Plastic Working Principle: Photovoltaic effect

Magic of Rotational dynamic (FUN SCIENCE DEMONSTRATION MODEL) : It should be based on Centrifugal force concept through our daily need, which has made our life easy. PVC structure without short circuit problem at all.

PARYAVARAN TECHNOLOGIES

Relicon Technologies