WBPWD/SE/SC_SS/NIT11/2025-2026

Scheduled and Non-Scheduled Items (Part - I and Part - II respectively)

Percentage BoQ At Par

BoQ_Ver4.0

Bidder Name :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

NUMBER #

Building Works :- Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm

(b) Depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring shoring.

Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (a) With earth obtained from excavation of foundation.

Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand.

Pre-Constructional Anti-termite measures: (a) Anti termite treatment to the top surface of the consolidated earth within plinth walls with chemical emulsion by admixing chloropyrofos emulsifiable concentrates (1% concentration) with water by weight at the rate of 5 Litres per sq. m. of the surface before sand bed or sub-grade is laid. Holes upto 50 mm. to 75 mm. deep at 150 mm. centre to centre both ways shall be made with 12 mm, diameter mild steel rod on the surface to facilitate saturation of the soil with the chemical emulsion. The work shall be carried out as per specification described in para 6.4 of code IS- 6313 (part -II) 1981.

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.

Cement concrete with graded stone ballast (40 mm size excluding shuttering) (A) Pakur Variety (a) 1:3:6 proportion (i) In Ground Floor

Controlled Cement concrete with well graded stone chips (20mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. (a) M 25 Grade (i) In Ground Floor

(ii) In 1st Floor

(iii) In 2nd Floor

(iv) In Roof 3rd Floor

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (a) Pakur Variety (i) In Ground Floor

(ii) In 1st Floor

(iii) In 2nd Floor

(iv) In Roof 3rd Floor

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (A) For works in foundation, basement and upto roof of ground floor/upto 4 m (a) Tor steel / Mild Steel (JSW/JSTL/SHYAM/SRNL/ELECTROSTEEL/SSL) (i) In Ground Floor

(ii) In 1st Floor

(iii) In 2nd Floor

(iv) In Roof 3rd Floor

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (a) 25 mm to 30 mm shuttering without staging in foundation

(b) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work (i) In Ground Floor

(ii) In 1st Floor

(iii) In 2nd Floor

(iv) In 3rd Floor

Bailing or pumping out water from foundation trenches.

Supplying Eucalyptus-bullah piles at work site, including dressing and making one end pointed. (a) 100mm diameter

(b) 150mm diameter

Coal tarring on wooden surfaces including cost of materials. (a) Double coat.

Labour for driving Sal-bullah / Eucalyptus bullah piles by monkey in sorts of soil including hoisting and placing piles in position, protecting the pile head with iron ring and cutting and shaping heads before and after driving and including hire and labour for necessary driving appliances and all tackles. (a) 100mm diameter

(b) 150mm diameter

Labour for fitting and fixing 10 cm. to 13 cm. diameter Sal-bullah/Eucalyptus-bullah as ties and runners including necessary nails, bolts and nuts. (a) 100mm diameter

Supplying empty Cement bags in good condition.

Filling empty Cement bags with dry earth or sand, stitching the bag (cost of thread included) and carrying and placing them in position and all incidental charges complete but excluding cost of sand and gunny bags.

Brick work with 1st class bricks in cement mortar (6:1) (a) In Foundation and Plinth

(b) In Superstructure (i) In Ground Floor

(ii) In 1st Floor

(iii) In 2nd Floor

(iv) In Roof 3rd Floor

125 mm. thick brick work with 1st class bricks in cement mortar (4:1) (i) In Ground Floor

(ii) In 1st Floor

(iii) In 2nd Floor

(iv) In 3rd Floor

Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (a) Sal : Local. (i) In Ground Floor

(ii) In 1st Floor

(iii) In 2nd Floor

(iv) In 3rd Floor

Supplying, fitting and fixing fibre reinforced polymer (FRP) Composite door frame as per approved section with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to safisfy IS: 4020 door testing performance criteria. (a) 66mm x 90mm

Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan orsimilar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings. (a) 35 mm thick shutter (single leaf) (i) In Ground Floor

(ii) In 1st Floor

(iii) In 2nd Floor

(iv) In Roof 3rd Floor

Supplying, fitting & fixing fibre reinforced polymer (FRP) Composite door shutters as per approved design with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to satisfy IS:4020 door testing performance criteria. (a) 32 mm thick (i) In Ground Floor

Supplying, fitting and fixing M.S. Clamp for fixing door and window frame made of flat bent bar, end bifucated, fixed in cement concrete with stone chips (4:2:1) fitted and fixed complete as per direction. (a) 40 mm. x 6 mm., 200 mm. length

Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. (a) 100mm. X 58mm. X 1.90mm.

(b) 75mm. X 47mm. X 1.70mm.

Anodised aluminium Aldrop / Sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/66) fitted and fixed complete. (a) 300 mm long x 19 mm dia bolt

(b) 250mm x 16mm dia bolt.

Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: (a) 300mm long x 10mm dia. bolt.

(b) 150mm long x 10mm dia. bolt.

Hydraulic door closer of approved quality as per I.S.I. standard fitted and fixed complete. (a) Medium type (I.S.I. size 2)

Anodised aluminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete. (a) With continuous plate base hexagonal/round rod. (i) 150 mm grip x 10 mm dia. Rod

Supplying 'Godrej' mortice lock chromium plated with latch and keys 4 levers, including fitting and fixing complete.

Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three ) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of the Engineer-incharge. Weight of Strainless Steel railing per metre 6.5 Kg (approx).

Collapsible gate with 40 mm x 40 mm. x 6 mm. Tee as top and bottom guide rail, 20 mm. x 10 mm. x 2 mm. vertical channels 100 mm. apart in fully stretched position 20 mm. x 5 mm. M.S. flats as collapsible bracings properly rivetted and washered including 38 mm. steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc and making good damages complete.

M.S. gate of Jail type as per approved design made ofstrong M.Sframe work, intermediate stiffeners and roundssquare bars or angles. M.S. sheet (not less than 14 gauge) gussets, cleats etc. including necessary riveting, bolting, welding, locking and hanging arrangements, fitting and fixing complete as per direction of the Engineer-in -charge.

M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs. (a) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. (i) In Ground Floor

(ii) In 1st Floor

(iii) In 2nd Floor

(iv) In Roof 3rd Floor

Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622-2006 & IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance > 0.5, Mohr's hardness > 5.0, Staining resistance: Class-1, Water Absorption: E < 0.5%], MOR > 35 N/sq.mm in Internal area ofbuilding e.g. oilet Block, Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm thick layer applied directly over finished artificial stone floor/ Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per Sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/ epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor). (i) In Ground Floor: Sizes-600 mm x600mm x10 mm with breaking strength > 1500 N

(ii) In 1st Floor

(iii) In 2nd Floor

18 mm. to 22 mm. thick, kota stone slab set in 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigment matching the stone shade, including grinding & polishing as per direction of Engineer - in - charge to match with the existing work. [Slurry for bedding @ 4.4 kg/Sq.m and pointing @2.0 kg/Sq.m] (i) In Ground Floor

(ii) In 1st Floor

(iii) In 2nd Floor

Extra cost of labour for prefinished and premoulded Nosing to treads of steps, railing, window sill etc. of Kota Stone.

Extra cost of labour for grinding Kota Stone Floor in treads and riser of Steps.

Supplying and laying chequered tiles of any shade & ofapproved quality with (1:1½:3) cement concrete laid inpanels or patterns as directed in pavement, footpath etc.including necessary underlay 25 mm thick [avg] cementmortar (1:3) complete in all respect with all labour andmaterials. [Using cement slurry @ 4.4 kg/Sq.m at back sideand @2.4 kg/Sq.m for joint filling] (a) Red Variety (i) 25mm. thick

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10 mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (A) Floor With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/ Sq.m. & joint filling using white cement slurry @ 0.20 Kg/ Sq.m. (1) Area of each tile upto 0.09 Sq.m. (a) Coloured decorative (i) In Ground Floor

(ii) In 1st Floor

(iii) In 2nd Floor

(B) Wall With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thickcement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (1) Area of each tile above 0.09 Sq.m (a) Coloured decorative (i) In Ground Floor

(ii) In 1st Floor

(iii) In 2nd Floor

Labour for Chipping of concrete surface before taking up Plastering work.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or rougening of concrete surface, including throating, nosing and drip course where necessary (ground floor) (A) With 6:1 cement mortar (a) 20 mm. thick plaster (Internal) (i) In Ground Floor

(ii) In 1st Floor

(iii) In 2nd Floor

(iv) In 3rd Floor

(b) 15 mm. thick plaster (i) In Ground Floor

(ii) In 1st Floor

(iii) In 2nd Floor

(iv) In 3rd Floor

(B) With 4:1 cement mortar (a) 10 mm. thick plaster (i) In Ground Floor

(ii) In 1st Floor

(iii) In 2nd Floor

(iv) In 3rd Floor

Neat cement punning about 1.5 mm. thick in wall dado, window, sills, floor, drain etc.

Applying 2 coats of bonding agent with synthetic multi functional rubber emulsion having adhesive and water proofing properties by mixing with water in proportion (1 bonding agent : 4 water : 6 cement) as per Manufacturer's specification [Cement to be supplied by the Department]

Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. (a) Two Coats

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or concrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (a) Two Coat (i) In Ground Floor

(ii) In 1st Floor

(iii) In 2nd Floor

(iv) In Roof 3rd Floor

Protective and decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. (A) Premium 100% Acrylic Emulsion (a) Two Coat (i) In Ground Floor

(ii) In 1st Floor

(iii) In 2nd Floor

(iv) In Roof 3rd Floor

(a) Priming one coat on timber or plastered surface with synthetic oild bound primer of approved quality including smoothening surfaces by sand papering etc.

(b) Priming one coat on steel or other metal surface with synthetic oild bound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary. (a) On timber or plastered surface : With super gloss (hi-gloss) (i) Two coats (with any shade except white)

(b) On steel or other metal surface : With super gloss (hi-gloss) (i) Two coats (with any shade except white)

Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architectural drawings and direction of Engineer-in-charge. (a) 10-12 Micron thickness Annodizing film (i) Natural white

Supplying bubble free float glass of approved make and brandconforming to IS: 2835-1987. (a) 5mm thick clear glass.

Sanitary & Plumbing Works :- Supplying, fitting and fixing PVC pipes of approved make of Schedule 80(medium duty) conforming to ASTMD - 1785 and threaded to match withGI Pipes as per IS : 1239 (Part - I). with all necessary accessories,specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder batsclamps, including cutting pipes, making threads,fitting, fixing etc.complete in all respect including cost of all necessary fittings asrequired,jointing materials and two coats of painting withapproved paint in any position above ground. (Payment will be made on the centre linemeasurements of total pipe line including all specials. No separatepayment will be made for accesories, specials. Payment for painting will be made seperately) (a) For Exposed Work - PVC Pipes (i) 15 mm

(iii) 25 mm

Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials.) (A) For Concealed Work (a) CPVC Pipes Class-2, SDR-13.5 (i) 15 mm

Supplying, fitting and fixing in position G.I. pipes of TATA make for underground works with all necessary accessories, specials viz.socket, bend, tee, union, cross, elbow, nipple, short piece etc.including cost of all materials,jointing materials , cutting pipes,making threads, cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed with two coats of painting on G.I. pipes and specials with bituminous paint complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials. Payment for painting will be made seperately) (i) 50 mm dia. medium quality

Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.). (i) 50 mm dia.

(ii) 40 mm dia.

(iii) 32 mm dia.

(iv) 25 mm dia.

Supplying, fitting and fixing bib cock or stop cock. (a) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand.

(b) Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar.

Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc.

Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint. (a) 550 mm X 400 mm size

Supplying, fitting and fixing White Vitreous China Sink in position on C.I. brackets including two coats of painting of brackets. (a) Plain edge sink with overflow (i) 610 mm X 450 mm X 250 mm

Supplying, fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. (a) 600 mm long

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer (a) 2000 litre capacity

Labour for hoisting plastic water storage tank. (a) Above 1500 litre upto 5000 litre capacity (i) Upto 1st story from G.L.

(ii) Extra for each additional story

Labour for punching hole in plastic water storage tank upto 50 mm dia.

Supply of UPVC pipes & fittings conforming to IS-13592-1992 (A) UPVC Pipes (a) Single Socketed 3 Meter Length (i) 75 mm dia.

(b) Single Socketed 1.8 Meter Length (i) 110 mm dia.

(B) Fittings (a) Plain Tee (i) 110 mm dia.

(b) Door Y (LH) & (RH) (i) 110 mm dia.

(c) Door Bend (T.S.) (i) 110 mm dia.

(d) Vent Cowl (i) 110 mm dia.

(e) 110 X 110 P Trap (i) 75 mm dia.

(f) W.C. Connector (150 mm long) 125 X 110(W/WC Ring) (i) 75 mm dia.

(g) 125/110 P Trap with W.C. Ring (i) 75 mm dia.

Supplying, fitting & fixing Aluminium domical grating. (i) 100 mm

Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete. (A) UPVC Pipes (i) 110 mm dia.

(B) UPVC Fittings (a) Plain Tee (i) 110 mm dia.

(b) Bend 87.5 degree (i) 110 mm dia.

(c) Shoe (i) 110 mm dia.

Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding 'P' or 'S' trap (excluding cost of concrete for fixing). (a) With 'P' trap (i) 580 mm X 440 mm

Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc. (a) With 'P' trap

Supplying, fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. (a) 900 mm long

Supplying, fitting and fixing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately). (a) 450 mm X 350 mm

Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete. (a) E.W.C. (i) Plastic (hallow type) white

Supplying, fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete. (a) Polythene Flush Pipe

Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges. (a) 600 mm X 450 mm

Supplying, fitting and fixing soap holder. (a) PTMT (Prayag or equivalent)

Supplying, fitting and fixing PTMT Smart Shelf of approved make of size 300 mm.

Supplying, fitting and fixing towel rail with two brackets. (a) C.P. over brass (i) 25 mm dia. and 600 mm long

Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials. (a) With Pakur variety (JSW/JSPL/SHYAM/ SRMB/ BMASL/ ELECROSTEEL/SSL)

Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. Note:- (i) Finished level of Septic Tank should be 400 mm. from Ground Level. (ii) Height of 50 mm. Ventilation pipe & Mosquito proof mesh, should be follwed as per IS:2470, Part- I.Payment will be made separetly on the basis of actual height based on relevant I.S.Code. (a) With Pakur variety (JSW/JSPL/SHYAM/ SRMB/ BMASL/ ELECROSTEEL/SSL) (i) For 100 users

Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials. With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia. (a) With Pakur variety (JSW/JSPL/SHYAM/ SRMB/ BMASL/ ELECROSTEEL/SSL)

Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. (a) 635 mm X 395 mm X 420 mm

Supplying, fitting and fixing 18 mm thick marble partition slab with chawk doongri marbel square cut, both sides polished with two front corner srounded and edges polished.

Open jointed stone ware pipe 100 mm dia. supplied, laid and fitted in position duly encircled all round by 150 mm thick layer jhama metal (38 mm to 50 mm size) including excavation of earth in any soil upto required depth including refilling trench,watering and ramming complete. (Cost of Jhama Metal to be paid seperately).

Tube Well :- Labour for boring through any type of soil for sinking tube well of required dia. with top enlargement by rig boring system (either by reserve circulation or by direct rotary method) including hire charges and labour for rig machine, tools and plants, staging, force pumping set and making arrangement for water required for boring etc. complete and lowering of pipes, strainers, blind pipes etc. complete. (a) For depth upto 250 metre for 100 mm dia. Tube well with top enlargement of 200 mm dia.(upto 50 metre). (i) 1st 50 metre

(ii) Next 50 metre

(iii) Next 50 metre

(iv) Rest 100 metre

Supply of PVC pipes & fittings (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (a) PVC Pipes (i) 100 mm

(b) Nipple (300 mm long) (i) 150 mm

(c) Threaded Adopter (i) 150 mm

(d) Threaded End Cap (i) 150 mm

(e) End Plug (i) 100 mm

Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.). (i) 50 mm dia.

Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). (i) 50 mm

Supplying high density polythene strainer of approved make with adapter conforming to I.S. specifications. (i) 100 mm dia.

Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (a) For Exposed Work (i) 150 mm dia. heavy quality

(ii) 50 mm dia. medium quality

(iii) 25 mm dia. medium quality

Supplying, fitting and fixing heavy type bell mouth reducing socket. (i) 100 mm X 150 mm

Supplying, fitting and fixing steel cutter piece upto 450 mm long with sockets. (i) 75 mm dia.

Supplying, fitting and fixing 300 mm M.S. housing clamp of approved quality.

Packing annular space between the outside of the housing pipe and the bore with puddled clay balls of approved size as per direction of the Engineer-in-charge with cost of all materials and labour complete.

Packing the annular space between the outside of the tube well pipes & strainers and the bore with pea size washed gravel of approved quality having size from 2 mm to 5 mm or the size approved by the Engineer-in-charge including cost of all materials labour and equipment complete.

Labour for making arrangement for showing verticality test including the cost for hire charges of tools and plants, scafolding, labour etc. all complete.

Washing and developing tube well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with 'V' notch including hire and labour charges for all tools and plants and scaffolding as required.

Collecting sample of water for bacteriological and chemical test from any depth at any time during execution of work including hire and labour charges for tools and plants and sterilising the equipments, paying all charges and fees, testing etc. complete in all respect as per direction.

Geophysical investigation of the acquifer by electrologging system with all tools and plants as necessary including supply of necessary report.

Plinth Protection :- Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm.

Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. (a) Pakur Variety (i) In Ground Floor

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (a) 25 mm to 30 mm shuttering without staging in foundation.

Brick work with 1st class bricks in cement mortar (6:1) (a) In Foundation and Plinth

125 mm. thick brick work with 1st class bricks in cement mortar (4:1) (i) In Ground Floor

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary. [Excluding cost of chipping over concrete surface] (A) With 1:6 cement mortar (a) 15 mm thick plaster (i) In Ground Floor

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m.

Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking\ out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. (a) 20 mm thick

Entrance Pathway :- Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm.

Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (a) 25 mm to 30 mm shuttering without staging in foundation.

Cement concrete with graded stone ballast (40 mm size excluding shuttering) (i) In Ground Floor

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (a) Pakur Variety (i) In Ground Floor

Brick work with 1st class bricks in cement mortar (6:1) (a) In Foundation and Plinth

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary. [Excluding cost of chipping over concrete surface] (A) With 1:6 cement mortar (a) 15 mm thick plaster (i) In Ground Floor

Electrical Work :- Supplying and fixing Sheet steel Main Swiching on angle iron frame on wall. (a) 60/63 A [Standrad/ Havells/ HPL]

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire(Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish. (a) 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC (i) Avg 8 Mtr.

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire(Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish. (a) 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC (i) Avg 8 Mtr.

Cutting Channel of size (40 mm x 40 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 19 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire andmending good damages to original finish by using own tools and tackles. (a) 19 mm dia 3 mm thick polythene pipe without earth continuity wire

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. (a) 3 x 22/0.3 (1.5 sqmm)

(b) 2x2.5 sqmm +1x21.5 sqmm [For Comp. Board, Compound Light]

(c) 2x6 sqmm +1x4 sqmm [PDB to SPNDB]

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required [For Lift shaft] (a) 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. [Make-Legrand/L&T/ABB/ Siemens] (a) 2+12 way

Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.-Up to 160A. [Make- Legrand/L&T/ABB/ Siemens] (a) 6/8 Way

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBS and necessary connection. [Make-Legrand/L&T/ABB/ Siemens] (a) 6-32 A, SP MCB

(b) 32A, TP MCB

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBS and necessary connectuion [Make- Legrand/L&T/ABB/ Siemens] (a) 140A, DP Isolator

Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection. (a) 1100A, FP MCCB

Supply of 1.1KV grade following XLPE insulated stranded copper unarmoured cable (Make: KEI/Havells/Polycab /Gloster/RR Kabel) (a) 4C x 10 sq.mm (For VTPN incomer)

Laying of cable upto 3/4 core 10 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy, mending good damages and painting.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below. (a) 4C x 10 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials. (a) 4C x 10 sqmm

Supply & Fixing 240 V, 4 nos. 6 A, 3 pin Modular type plug socket with 4 nos. 6A Modular type switch (Brand approved by EIC), 16A Modular switch type MCB (C-Curve) and Indicator without plug top on 2 row 18 Module GI Modular type switch board with 2 row 18 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (Comp. Board) (from SPNDB)

Supply & Fixing 240 V, 2 Nos 6 A, 3 pin Modular type plug socket with 2 nos. 6A Modular type switch (Brand approved by EIC), without plug top on 6 Module GI modular type switch board with 6 module top cover plate flushed in wall incl. S&F switch board and cover plate and making necessary connections with PVC Cu wire and earth continuity wire etc(from SPNDB)

Supplying & Fixing GI Modular Switch Board of the following sizes complete with top cover plate flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works- 2module.

Supply & Fixing 240 V 16 A moduler type switch (Brand approved by EIC) on GI Modular type switch board having top cover plate and making necessary connections as required.

Fixing only bulk head ceiling fitting on wall /ceiling by screws etc. (For Lift shaft & Pit)

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia El conduit (14 SWG) supports fixed with "L" type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, "L" type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia El conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Fixing only outdoor / street light type fluorescent light fitting or MVlight fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes /providing clampingarrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bendS&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc.

Supplying & Fixing of Box type fan clamp of 150mm dia & 80mm depth made of 16 SWG CRCA sheet with one end duly sealed cover, properly welded, incl. S&F 12mm dia 600mm long MS rod duly bent by heat treatment at the centre position of rod to grip fan bobbin properly, incl. binding the rod and fan box with reinforcement by 22 SWG steel binding wire, incl. supplying & covering the box with alkathene sheet, placed in order to prevent concrete from entering the box.

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc.

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.

Engraving the deptt. number with 10 mm lettering on the body of fan upto 10 letters incl. hifen, stroke or stop.

Extra for additional one letter incl. hifen, stroke and stop.

Painting upto 10 letters of the engraved number with approved black/red paint as required.

Extra painting for additional one letter of the engraved number with hifen, stroke etc. with black or red paint.

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: (a) 23 cm (9")

Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) For GI (a) for 23 cm Exhaust fan (9")

(b) for 30 cm Exhaust fan (12") (GI)

Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length.

Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board.

Excavation of soil for installation of Earth Electrode and filling & ramming. (a) For Soft Soil

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above groundlevel driven to an average depth of 3.65 Mts. below the ground level as below: (a) By TATA-Medium GI pipe

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) Ci hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe.

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 50 mm x 6 mm on as per GS ( for vertical run on cable duct & panel coneection).

Supply & Delivery of 4 feet Industrial box type single LED fitting including S &D of 1X20 wattt LED tube (Polycarbonate) with glare free light distribution, with minimum luminious efficacy 100 lumen/wt. (Mk. Crompton/ Wipro/ Jaquar/ Bajaj/Havells/ Panasonic)

Supply & Delivery of 4 feet Industrial box type Twin LED fitting including S &D of 2X20 watt LED tube (Polycarbonate) with glare free light distribution, with minimum luminious efficacy 100 lumen/wt. (Mk. Crompton/ Wipro/ Jaquar/ Bajaj/ Panasonic)

S & D of 9/10 watt LED Bulkhead light fittings complete with glass shed, wire net guard including LED lamps with minimum Luminous Efficacy 100lm/W. (Make Crompton/ wipro/Jaquar/ Bajaj/ Panasonic)

S & F 9/10 watt LED Lamp (Make: Crompton/ wipro/Jaquar/ Bajaj/ Panasonic)

Supply of Heavy Duty Exhaust fans complete with all accessories having the following Model / Cat No. (Make -EPC Electrical Pvt.Ltd.) (a) 9"( 230mm) Speed 1370 RPM

(b) 12"( 300 mm) Speed 1420 RPM

Supply of 230V, 50Hz,400 mm sweep heavy duty full metal body wall bracket fan (Cabin fan) complete with all accessories having the following Model / Cat No. (Make -EPC)

S & D of 48" sweep, 230V, 1-phase AC ceiling fans incl. all accss., the capacitor of fan must be P-2 type brust proof & must have safety wire directly linked from fan hook to stator of fan, complete with blades, canopy, fork, rubber bush etc. [Make: Crompton / Orient / Usha]

Supply & Fixing 19mm thick backelite sheet of size 600 mm(W)x450 mm (H) on suitable size MS angel iron structure made of 25mmX 6 mm thick MS flat. with S &F MS angel iron structre incl. necessary fixing materials and mnding goods the damages to original finish. [for installation of service connection]

Supply & Fixing 63A, Porcelin Cut-out on existing backelite sheet.

S&D of 240V, minimum 30 watt or higher, LED Street Light including IP65 protection with CCT (5700-6500) & minimum Luminious efficacy>= 110 Lumen/ Watt. (Make: Panasonic / Crompton/ wipro/ Jaquar/Bajaj/ Havells)

LIGHTING CONDUCTOR :- S&F Lightning Conductor Air Terminal made of 20 mm dia 1000 mm long GI pipe (ISI Medium) having five discharge prongs of 4 SWG GI (Hot Dip)| wire at top duly soldered with 7/16 stranded GI (Hot Dip) wire and 85 mm dia 6 mm thick GI base plate at bottom incl. necessary holes etc. complete duly grouted on the parapet etc. in CC mortar (4:2:1), including thimble joints of 7/16 SWG wire and GI strip with SS nuts, bolts & washers.

Supply & fixing GI (Hot Dip) strips 25 mm x 6 mm thick for horizontal run on the Parapet/Roof/ Wall with GI Saddles 1100 mm apart incl. mending good the damages to building works, including welded lap joints, "T" joints, [etc. and painting the joints with 2 (two) coats of bituminous paint.

Supply & fixing of GI (Hot Dip) strips 25 mm x 6 mm thick for vertical run on wall with GI saddles spaced not exceeding 1000 mm apart incl. mending good damages to building work, including welded lap joints, "T' joints, etc. and painting the joints with 2 (two) coats of bituminous paint.

Cutting cornices/ steps etc. including cutting recess in buildings etc. & Supply & fixing 15 mm bore (ISI-Medium) GI pipe protection as below and mending good damages to the building works: (a) Length upto 0.5 Mtr

(b) Length above 0.5 Mtr

Supply & Fixing of Testing Joints by 25 mm x 6 mm thick GI (Hot Dip) strip 125 mm long on wall after making suitable arrangement to establish a clearance of 50mm from wall for making junction connection with vertical conductor and conductor from earth electrode complete with S & F GI bolts, nuts, check-nuts, spring washers etc. and provide a protective arrangement for that junction point by keeping it in a GI housing / enclosure (openable for maintenance procedure), as required.

Earthing with 65 mm dia GI pipe (TATA-Medium) 3.0 Mts. long with welded half circle bracket of GI strip (65 x 8) mm. with two holes on extended portion of the strip of length min. 200 mm, and 1 No. 50 mm x 6 mm galvanized (Hot Dip) steel strip (4 Mts. long), 20 mm dia x 125 mm long galvanized bolt, double nuts, double washers including finishing both ends by making holes etc. and S & F 65 mm dia Gl pipe (ISI-Medium) protection (3 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 Mts.

Supply, Laying & Fixing of 50mm x 6mm galvanized (Hot Dip) steel strip in underground trench for interconnection between the Earth Points by proper welding and painting the lap & "T" joints with 2 (two) coats of bituminous paint for making a Earth Grid.

Item Rate BoQ

BoQ_Ver4.0

Bidder Name :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

NUMBER #

Fire Extingusher :- Supplying, Fitting and Fixing portable ABC type fire extinguisher capacity 6 Kg including all refills, bracket and all other charges as per IS: 15683

Supplying, Fitting and Fixing portable CO2 type fire extinguisher capacity 4.5 Kg including all refills, bracket and all other charges as per IS: 15683

Supplying, Fitting and Fixing portable Water type fire extinguisher capacity 9 Lt including all refills, bracket and all other charges as per IS: 15683

Submersible Pump :- Supply and delivery of 3ph. 440V, 3H.P. submersible pump motor set Make KSB (Model no. 6" UQD 182/4 + UMAI 150-2/22) having delivery outlet 50mm complete in all respect including taxes and duties as per specification and direction of EIC.

Supply, delivery and fixing of 4.00 Sq.mm. 3core flat PVC cable (Finolex or equivalent) for submersible pump-motor set.

Supply, delivery and installation of starter DOL star (L & T Make) with appropriate relay range.

Lowering, installation and commissioning of submersible pump motor set to the existing bore well after taking delivery of the pump as directed with necessary electrical works, fittings etc. excluding the cost of pump, cable and starter but including cost of carriage, labour, tools and plants, taxes as applicable as per satisfaction and direction of EIC. (a) 3ph. 440V, 3 H.P. submersible pump motor set

Please Enable Macros to View BoQ information