Construction of Khairian to Bakan road km. 0/0 to 1/900 under PMGSY(World Bank RRP-II) (Batch-II) under stage-II for the year 2018-2019 Package No. HP-04-292 in Tehsil Jawali District Kangra (HP).

Amount

Excavation in hilly area in all heights and depths and in all kind of soil by manual/mechanical means including saturated soil comprising of ordinary soil, soft rocks, hard rocks, chiseling/ wedging out of rock ( where blasting is prohibited) and their intermediate classification of soil complete including setting out true to the required line, grades cutting and trimming of side slopes , camber, super elevation and level shown as per the drawing and as directed by the Engineer-in- Charge at site according to the M.O.R.D. technical specification clause 302, 304 and 1603 and sorting out surplus materials and stacking the same in all leads and lifts in acquired width of the road and transportation of un-useful material for filling in road ways, camber, embankments for grade improvements and disposal of all un-useful material to required width of the road or on approved dumping sites through all modes of transporation including head load or animals transport or by mechanical means along with its levelling fine dressing and carriage of machineries, materials, tools equipments and safety measures and other incidential necessary to complete the work by mechanical means or labour if required. 56.21 cubic metre quantity of stones/useful materials to be recovered from the contractor at the rate Rs. 300/- (Rupees three hundred) per cubic metre from the bill on pro-rata basis as per actual quantity executed. Any loss to public/private property during the course of execution shall be the absolutely responsibility of the contractor which shall have to be compensated by him in all cases including carriage of materials within all leads and lifts and other incidental. The rate is including octroi, royality, malkana, toll tax, sale tax GST or other taxes imposed by the Government.

Loosening of the ground upto a level of 300mm (three hundred milimetres) below the sub grade level, watered, graded and compacted in layers to meet requirement of tables 300.1 and 300.2 for sub grade construction as per technical specification clause 303.5.2, and as per directions and entire satisfaction of Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidental. The rate is including octroi, royality, malkana, toll tax, sale tax GST or other taxes imposed by the Government.

Earth work in excavation in foundations for all type of road structure such as retaining walls, breast walls, culverts, drains and parapets etcetera and all type of classification of soil comprising of ordinary / mixed soil, ordinary rock, hard rock chiseling /wedging out rocks ( Where blasting is prohibited) as per drawings and M.O.R.D. technical specification clause 305 and 1603 and as per direction of the Engineer- In – Charge including setting out shoring and bracing , removal of stumps and other deleterious materials and disposal of materials upto any lead and lift including dressing of sides and bottom and back filling in trenches with excavated suitable approved material including shoring and strutting and pumping and bailing out water (surface and sub soil water ) upto any depth any quantam of water including cleaning of slush which may arrise out during dewatering as per direction of Engineer-in-Charge. Including carriage of materials within all leads and lifts and other incidental .

Back filling with granular material obtained from approved quarry/ road side cutting behind abutments, wing walls, return walls, and retaining walls/ Breast walls complete as per drawing and MORD technical specifications clause 1203 and 1604.7 section 300 and as per directions and entire satisfaction of Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidental. The rate is including octroi, royality, malkana, toll tax, sale tax GST or other taxes imposed by the Government.

Construction of Granular sub base 175mm (one hundred seventy five milimetres) consolidated thick by providing well graded material spreading in uniform layers with Tractor mount grader on prepared surface mixing by mix in place method with rotavator at OMC and compacting with three wheel 80-100 (Eighty/Hundred) KN static roller to achieve the desired density complete as per MORD technical specifications clause 401 (For grading-I Material), as per entire satisfaction and direction of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidentals. The rate is including octroi, royality, Malkana and Toll tax GST or other taxes imposed by the Government.

Providing and laying spreading and compacting stone aggregate of specified size to water bound Macadam specification including spreading in uniform thickness hand packing, rolling with three wheel 80-100 (Eighty/Hundred) K.N. static Road roller in stages to proper grade and camber applying brooming with application of crushable screening at the rate of 0.20 cum ( zero point two zero cubic metres) and bindingmmaterial at the rate of 0.06cum (zero decimal zero six cubic metre) per ten square metres, to fill up the intersitices of course aggregate, watering and compacting to the required density grading –II 63mm to 45mm ( Sixty three millimetres to forty five millimetres) size 75mm (Seventy Five millimetres) compacted thickness as per M.O.R.D. technical specifications clause 405 including hauling of material in all leads, lifts as per the entire satisfaction and direction of Engineer – in- Charge including carriage of materials within all leads and lifts and other incidential . The rate is including octroi, royality, Malkana, toll tax, sale tax GST or other taxes imposed by the Government.

Providing and laying spreading and compacting stone aggregate/ specified size to water bound Macadam specification including spreading in uniform thickness hand packing, rolling with three wheel 80-100 (Eighty/Hundred) K.N. static Road roller in stages to proper grade and camber, applying brooming with application of crushable screening at the rate of 0.18 cum ( zero point one eight cubic metres) per ten square metres, to fill up the intersitices of course aggregate, watering and compacting to the required density grading –III 53mm to 22.4mm (Fifty three milimetres to twenty two point four milimetres) size 75mm (Seventy Five millimetres) compacted thickness as per M.O.R.D. technical specifications clause 405 including hauling of material in all leads, lifts as per the entire satisfaction and direction of Engineer – in- Charge including carriage of materials within all leads and lifts and other incidential . The rate is including octroi, royality, Malkana, toll tax, sale tax GST or other taxes imposed by the Government.

Providing and applying primer coat with BITUMEN emulsion (SS-1) with Nano Techonolgy on the prepared surface of granular base including cleaning of road surface with Hydraulic brooms and spraying primer @ 0.85 Kg. (Zero point eight five kilogram) per square metre using one part bitumen emulsion SS-I and two part of water mixed with Nano tera prime emulsion at the rate of 1% (One percent) of weight of emulsion mechanical means as per M.O.R.D. technical specifications clause 502 including hauling of material in all leads, lifts as per the entire satisfaction and direction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, sale tax GST or other taxes imposed by the Government.

Providing and applying tack coat with bitumen emulsion (RS-I) with silance Nano Techonolgy using emulsion distributor at the rate of 0.275 kgs. (Zero decimal two seven five kilogram) per square metre one part of bitumen emulsion RS-I and two part of water mixed with 1.4% (one point four percent) Nano tack emulsion of weight of emulsion on the prepared granular surfaces treated with primer and cleaned with hydraulic broom as per MORD technical specification clause-507, including hauling of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidental. The rate is including octroi, royality, malkana toll tax, sale tax, GST and other taxes imposed by the Government.

Providing and applying tack coat with bitumen emulsion (RS-I) with Nano Techonolgy using emulsion distributor at the rate of 0.225 kgs. (Zero decimal two two five kilogramm) per square metre one part of bitumen emulsion RS-I and two part of water mixed with 1.4% (one point four percent) Nano tack emulsion of weight of emulsion on the prepared bituminous surfaces treated with primer and cleaned with hydraulic broom as per technical specification clause-503, including hauling of material in all leads lifts as per the entire satisfaction and direction of Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidental. The rate is including octroi, royality, malkana toll tax sale taxGST and other taxes imposed by the Government.

Providing and laying 50mm (fifty milimetres) thick bituminous macadam with Nano Techonolgy with hot mix plant using crushed aggregate of grading as per table 500.4 premixed with bituminous binder, transported to site upto a lead of 1000m (one thousand metres) laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per technical specification clause 504 silance Nanotechnology (Zyco Therm), at the rate of 0.1% (zero decimal one percent) of weight of bitumen binder including hauling of material in all leads lifts as per the entire satisfaction and direction of Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidental. The rate is including octroi, royality, malkana toll tax sale tax GST and other taxes imposed by the Government.

Providing and laying 30mm (thirty milimetres) compacted thick bituminous concrete with minimum 100-120 TPH (one hundred - one hundred twenty) tonne per hour) hot mix batch/ drum type plant with electronic control Grading-II using crushed aggregate 13.2mm (thirteen point two milimetres) size of specified grading premixed with bituminous binder VG-10 (Viscosity grade ten) @ 5.5% (five point five percent) of mixed and filler using silane Nanotechonolgy (Zyco Therm) at the rate of 0.1% (zero decimal one percent) of weight of bitumen binder of mix weight transported to site, laid with censor paver finisher hydraulic with censor control to the required grade, level and alignment over a previously prepared surface and rolling complete with smooth wheeled roller 8-10 (eight to ten) tonne capacity for initial break down rolling and vibratory roller 8-10(eight to ten) tonne capacity or pneurnatic tyre roller of 12-15 (twelve – fifteen tonne) with tyre pressure of atleast 0.56MP’a (zero point five six) for intermediate rolling and finish rolling with 6-8 (six to eight) tonne smooth wheeled tandom roller to achieve the desire compaction as per MORTH technical specifications clause 507 including hauling of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidentals. The rate also includes octroi, royality, malkana toll tax, sale tax or other taxes imposed by the Government.

Scarifying the existing bituminous road surface to a depth of 150 mm (one hundred fifty milimetres) and disposal of scarified material upto any lead and lifts as per Technical Specification Clause 301.4, including carriage of materials within all leads and lifts and other incidental . The rate IS including octroi, royality, Malkana, toll tax, sale tax GST or other taxes imposed by the Government.

Construction of un-reinforced, dowel jointed at expansion and construction joints only plain cement concrete pavement 25cm (twenty five centimeters) thickness M-30 (M-thirty) (Grade) as per design over a prepared sub base with 43 grade (forty three) cement or any other equivalent as per clause 1501.2.2 conforming to IS:383 maximum size of coarse aggregate not exceeding 25mm, (Twenty five millimetres) mixed in a concrete mixer of not less than 0.2cum (Zero point two cubic metre) capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick (One hundred twenty five micron )polythene film wedges, steel plates including levelling the form work as per drawing, spreading the concrete with shovel, rakes, compacted using needle, screed and plate vibrator and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars of appropriate dia near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slab for fourteen days using curing compound (where specified) and water finishing to lines and grade as per drawing and MORD technical specifications clause 1501 as per direction of Engineer-in-Charge, including curing complete, including carriage of materials within all leads and lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Construction of sub grade and earthen shoulders with approved materials obtained from borrow pits with all lifts and leads transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000m (One thousand metre) as per MORD technical specification clause 303.1,as per the direction and the entire satisfaction of Engineer-in-Charge Including carriage of material within all leads and lifts and other incidental . The rate is including of octroi, royality, Malkana, toll tax, sale tax GST or other taxes imposed by the Government.

Providing and laying of hot applied thermoplastic compound 2.5 mm (two point five milimetres) thick including reflectorising glass beads @ 250 gms (two hundred fifty grams) per sqm area, thickness of 2.5 mm (two point five milimetres) is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes, as per the direction and the entire satisfaction of Engineer-in-Charge Including carriage of material within all leads and lifts and other incidental . The rate is including of octroi, royality, Malkana, toll tax, sale tax GST or other taxes imposed by the Government.

Providing and laying concrete for plain/reinforced concrete in open foundation complete nominal mix 1:4:8 (one cement : four sand : eight graded stone aggregate 40mm (forty milimetres) as per drawing and technical specifications section 800, 802, 900 and 1200, as per the direction and the entire satisfaction of Engineer-in-Charge Including carriage of material within all leads and lifts and other incidental . The rate is including of octroi, royality, Malkana, toll tax, sale tax GST or other taxes imposed by the Government.

Providing and laying 100mm ( Hundred millimeter) dia ISI marked PVC pipe weep holes in brick masonry/ stone masonry, plain/reinforced concrete abutment, wing wall, return wall and retaining/breast walls extending through the full width of the structures with slope of 1(V): 20(H) one vertical : twenty horizental towards drawing face complete as per drawing and M.O.R.D. technical specifications clause 709 and 1206 and as per direction and entire satisfaction of Engineer – in- Charge, including the cost of collar etcetera complete, including carriage of materials within all leads and lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated concrete for plain/ reinforced concrete in open foundation for all type of structure complete plain cement concrete grade M-10 ( M Ten) nominal mix 1:3:6 ( One cement : three sand : six graded crushed stone aggregate 40mm ( forty millimeter) nominal size in or under water including curing complete including pumping or bailing out water , dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights/ depths excluding the cost of form work in drain as per drawings and M.O.R.D. technical specification section 800, 900 and 1200 as per the direction of Engineer-in-Charge Including carriage of material within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete M-15 (M-Fifteen) with minimum cement contents not less than 275 kg (Two hundred seventy five kilogram) per cubic metre nominal mix 1 : 2 ½ : 5 ( one cement : two & half sand : five graded crushed /broken stone aggregate 40mm ( forty millimetre) nominal size) in or under water including pumping or bailing out water/ dewatering surface and sub soil water and removal of the slush which may arise at the time of laying under water for all heights/ depths and any quantum of water for sub structure and the like etcetera in toe walls etcetera as per drawings and M.O.R.D. technical specifications section 800, 900 and 1200 including the cost of form work curing complete and including carriage of materials in all leads, lifts and other incidental or as per the entire specification and directions of Engineer-in-Charge . The rate is including octroi, royality, Malkana, toll tax, sale tax GST or other taxes imposed by the Government.

Providing and laying flooring mechanically mixed and vibrated plain cement concrete M-15 (M-Fifteen) with minimum cement contents not less than 275 kg (Two hundred seventy five kilogram) per cubic metre nominal mix 1 : 2 ½ : 5 ( one cement : two & half sand : five graded crushed /broken stone aggregate 40mm ( forty millimetre) nominal size) in or under water including pumping or bailing out water/ dewatering surface and sub soil water and removal of the slush which may arise at the time of laying under water for all heights/ depths as per drawing and MORD technical specification section 1303 including the cost of form work and curing complete including carriage of material in all leads and lifts and other incidental as per entire satisfaction and direction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, sale tax GST or other taxes imposed by the Government.

Providing and laying of boulder apron Gabion wall laid in wire crates with 4mm (four millimeter) dia GI wire conforming to IS:280 and IS:4826 in 100mmx100mm (One hundred millimeter into one hundred millimeter) mesh (woven diagonally) including 10 (Ten) per cent extra for laps and joints laid with stone boulders weighing not less than 40 kg (Forty kilogramme) each as per drawing and MORD technical specifications Clause 1301 and as per direction and the entire satisfaction of the Engineer-in-Charge including carriage of materials up to all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and erecting a "W" metal beam crash barrier comprising of 3mm (Three milimetres) thick corrugated sheet metal beam rail, 70cm (seventy centimetres) above road/ground level, fixed on ISMC series channel vertical post, 150x75x5mm (one hundred fifty into seventy five into five milimetres) spaced 2m (two metre) centre to centre, 1.8m (one point eight metre) high 1.1m (one point one metre) below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to confirm to IS:1367 and IS: 1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150x75x5mm (One hundred fifty into seventy five into five milimetres) 330mm (three hundred thirty milimetres) long complete as per clause 810, and including carriage of materials within all leads and lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, sale tax GST or other taxes imposed by the Government.

Supplying fitting and placing HYSD bars reinforcement in sub structure complete as per drawing and technical specification section 1001 and 1206 including cutting, bending binding and placing in position complete in all respect including cost of binding wire up to any heights including carriage of materials with in all leads and lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, sale tax GST or other taxes imposed by the Government

Supplying fitting and placing HYSD bars reinforcement in super structure complete as per drawing and technical specification section 1001 and 1400 including cutting, bending binding and placing in position complete in all respect including cost of binding wire up to any heights including carriage of materials with in all leads and lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, sale tax GST or other taxes imposed by the Government

Providing and laying mechanically mixed and vibrated/ plain cement concrete in sub structure using grade M-20 (M-twenty) designed mix with minimum cement contents not less than of 330kg (three hundred thirty kilogram) per cubic metre with 20mm (Twenty milimetres) nominal size graded crushed stone aggregate as per drawing and M.O.R.D. technical specifications for roads section 800, 900 and 1200 including the cost of form work but excluding the cost of reinforcement for reinforced concrete work in bed block in foundation, as per the direction of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidential . The rate is including octroi, royality, Malkana, toll tax, sale tax GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated/ plain cement concrete in open foundation using grade M-20 (M-twenty) designed mix with minimum cement contents not less than of 330kg (three hundred thirty kilogram) per cubic metre with 20mm (Twenty milimetres) nominal size graded crushed stone aggregate as per drawing and M.O.R.D. technical specifications for roads section 800, 900 and 1200 including the cost of form work but excluding the cost of reinforcement for reinforced concrete work and curing complete in abutment, in foundation, as per the direction of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidential . The rate is including octroi, royality, Malkana, toll tax, sale tax GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete in super structure as per drawing and M.O.R.D. technical specification section 800, 900 and 1400 R.C.C. Grade M-25 (M-twenty five) designed mix with minimum cement contents of 400 kg. (four hundred kilogrammes) per cubic metre with 20mm ( twenty millimeter) nominal size graded crushed stone aggregate and curing complete including cost of form work but excluding the cost of reinforcement for reinforced concrete work in deck slab, wheel guard etc. as per the direction of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidential . The rate is including octroi, royality, Malkana, toll tax, sale tax GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete grade M-30 (M-Thirty) mix design having cement contents not less than 430kg (four hundred thirty kilogram) per cubic metre with 20mm (Twenty millimetres) nominal size crushed stone aggregate and curing complete in wearing coat including cost of form work and reinforcement as per drawing and M.O.R.T.H. technical specification section 800, 900, 1001 and 1404 and as per direction of Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidental. The rate is including of octroi, royality, Malkana, toll tax, sale tax GST or other taxes imposed by the Government.

Providing and fixing drainage spouts complete with 100mm (One hundred millimeter) dia galvanized mild steel down pipe with corrosion resistant structural steel grating complete as per drawing and M.O.R.D. technical specifications clause 1404.5 and as per direction and entire satisfaction of Engineer – in- Charge including carriage of materials within all leads and lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, sale tax GST or other taxes imposed by the Government. Detail and specification shown in standard.

Providing and laying mechanical mix and vibrated plain cement concrete complete grade M-15 (M-fifteen) below/ under approach slab including the cost of form work design mix with cement contents not less than 275kg (two hundred seventy five kilogram) per cubic metre with graded crushed stone aggregate 40mm (forty milimetres) nominal size and curing complete as per drawing and MORTH technical specifications section 1700 and 2700 as per direction and entire satisfaction of Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidental. The rate is including of octroi, royality, Malkana, toll tax, sale tax GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced Cement Concrete grade M-25 (M-Twenty five) design mix with cement contents not less than 400kg (four hundred kilogram) per cubic metre with 20mm (Twenty millimetres) size crushed stone aggregate in super-structure as per drawings and M.O.R.T.H. technical specifications clause 800 and 1211 including the cost of form work and reinforcement for reinforced concrete work in approach slab and curing complete including hauling of materials in all leads and lifts and other incidental, as per the entire satisfaction and directions of Engineer-in-Charge. The rate is including of octroi, royality, Malkana, toll tax, sale tax GST or other taxes imposed by the Government.

Providing and fixing of typical PMGSY informatory sign board with logo as per M.O.R.D. specification and drawing . Three MS plates of 1.6 mm ( one point six millimeter) thick top and middle plate duly welded with MS flat iron 25mmx5mm ( twenty five millimeters into five millimeters) size on back on edges. The lower plate will be welded with MS angle iron frame of 25mmx25mmx5mm ( twenty five millimeter into twenty five millimetre into five millimeter). The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 Nos. ( Two Nos.) 75mmx75mm (seventy five millimeter into seventy five millimeters) of 12 SWG ( twelve standard wire gauge) sheet tubes posts duly embedded in cement concrete M-15 ( M fifteen) grade blocks of 450mmx450mmx600mm ( four hundred fifty millimeters into four hundred fifty millimeters into six hundred millimeters), 600mm ( six hundred millimeters) below ground level. Including mechanically mixed and vibrated. The top most diamond plate will be welded to middle plate by 47mmx47mm ( forty seven millimeter into forty seven millimeters) of 12 SWG ( twelve standard wire gauge) steel plate tube. All MS will be stove enameled on both sides. Lettering and printing, arrows, borders etcetera will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing and M.O.R.D. technical specifications section 1700 and Annexture1700.4 and as per direction of Engineer – in- Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Reinforced cement concrete mechanically mixed and vibrated nominal mix 1:2½:5 (one cement : two and half sand : five graded stone aggregate 40mm Forty milimetres) nominal size) M-15 (M-fifteen)grade including cost of form work and reinforcement for reinforced concrete work as per approved Kilometer Stone (Precast) of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and MORD Technical Specification Clause 1703, ordinary Kilometer stone as per the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidential . The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Reinforced cement concrete mechanically mixed and vibrated M-15 (M-Fifteen) grade nominal mix 1: 2 ½ : 5 ( one cement : two & half sand : five graded crushed /broken stone aggregate 40mm ( Forty millimetre) nominal size, including cost of form work and reinforcement for reinforced cement concrete work as per approved 200 m (Two hundred metre) stone of standard design as per IRC : 8 ( eight), fixing in position including painting and printing etcetera as per drawing and M.O.R.D. technical specification rural roads Clause 1703 (200 m stone precast). Including hauling of materials in all leads, lifts and other incidental and as per the entire satisfaction and directions of Engineer-in-Charge . The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government

Providing and fixing of semi reflective cautionary, mandatory and informatory sign board 600mm (Six hundred milimetres ) equilateral triangle as per IRC:67 made of 1.5mm (One point five milimetres) thick M.S. (mild steel) sheet duly stove white colour in front and grey colour on back with red reflective border of 65mm (sixty five milimetres) width and required letters and figures with reflective tape engineering grade as per clause 1701.3.9 of MORD for rural roads or required shade and colour supported enameled paint in and welded on 47mmx47mm of 12SWG (forty seven milimetres into forty seven milimetres) of (twelve standard wire gauge) sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 (M-Fifteen) grade cement concrete 450x450x600mm (Four hundred fifty into four hundred fifty into six hundred milimetres) 600mm (six hundred milimetres) below ground level as per approved drawing and specifications section 1700 Including hauling of materials in all leads, lifts and other incidental and as per the entire satisfaction and directions of Engineer-in-Charge . The rate is including octroi, royality, Malkana, toll tax, sale tax GST or other taxes imposed by the Government.

Providing and fixing of semi reflective cautionary, mandatory and informatory sign board 600mm (Six hundred milimetres ) circular for angle as per IRC:67 made of 1.5mm (One point five milimetres) thick M.S. (mild steel) sheet duly stove enameled paint in white colour in front and grey colour on back with red reflective border of 65mm (sixty five milimetres) width and required letters and figures with reflective tape engineering grade as per clause 1701.3.9 of MORD for rural roads or required shade and colour supported and welded on 47mmx47mm of 12SWG (forty seven milimetres into forty seven milimetres) of (twelve standard wire gauge) sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 (M-Fifteen) grade cement concrete 450x450x600mm (Four hundred fifty into four hundred fifty into six hundred milimetres) 600mm (six hundred milimetres) below ground level as per approved drawing section 1700 600mm (six hundred milimetres) equilateral and triangle, Including hauling of materials in all leads, lifts and other incidental and as per the entire satisfaction and directions of Engineer-in-Charge . The rate is including octroi, royality, Malkana, toll tax, sale tax GST or other taxes imposed by the Government.

Providing and erecting directions and place identification retro reflectorised sign up to 0.90 sqm (Zero decimal ninety square metres) size as per IRC:67 made of encapsulated lens type reflective sheeting vide M.O.R.D. technical specifications section 1700 fixed over aluminum sheeting 2mm (Two milimetres) thick with area not exceeding 0.9 sqm (Zero decimal nine square metres) supported on a mild steel single angle iron post 75x75x6mm (Seventy five into seventy five into six milimetres) 2 Numbers (Two Numbers) firmly fixed to the ground by means of properly designed foundation with M-15 (M-fifteen) grade 1:2½: 5 (One cement : two and half sand : five graded crushed/ broken stone aggregate 20mm (Twenty milimetres) nominal size) cement concrete 450mmx450mm x600mm (Four hundred fifty milimetres into four hundred fifty milimetres into six hundred milimetres) and 600mm (Six hundred milimetres) below ground level as per approved drawings and MORD technical specifications clause 1701 including painting, angle iron, posts with primer and two coats of epoxy paint including hauling of materials in all leads and lifts and other incidental or as per entire satisfaction and direction of Engineer-in-Charge. Including carriage of material within all leads and lifts and other incidental . The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing Reinforced cement concrete gaurd stone of standard design as per IRC:25 on curves fixed in position including finishing and lettering but excluding painting as per drawing and technical specification Clause 1704, as per entire satisfaction and direction of Engineer-in-Charge. including carriage of material within all leads and lifts and other incidental . The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Painting lines, dashes, arrows, etcetera on roads in two coats on new work with ready mixed road marking paint conforming to IS: 164 on bitumeneous/ concrete surface, including cleaning the surface of all dirt, dust and other foreign matter, demaraction at site and traffic control as per per drawing and technical specification clause 1702, as per entire satisfaction and direction of Engineer-in-Charge. including carriage of material within all leads and lifts and other incidental . The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Ravinder Kumar