Augmentation of Safety Signages in remaining floors of T.E. Bldg. Minto Road, MTNL, New Delhi.

Amount

Providing and Fixing of Exit / Escape Route Signage’s / Safety instruction Board /Emergency Contact Plates on 3 mm +/- 10 % Aluminum composite panel coated with photo luminescent self-glowing pigments (vinyl pasting not acceptable) to attain at least 4 hrs afterglow, with approved design as per the satisfaction of engineer-in-charge. (Make: PROLITE/ OPTOLITE / EVERLITE)

P/F/T/C of Egress Edge lit Light Single Sided 5 mm thick transparent acrylic sheet having monogram / instructions etched to acquire maximum light with LED’s (30 Nos. approx.) placed in top mounted suitable size 18 SWG, MS box duly powder coated in white colour and equipped with power supply, battery charger, overcharge protection facility and suitable 6 volt 1.3 AH lead acid dry cell battery to provide at least 8 hours backup including dismantling of existing worn-out signage if required. The board shall glow in green colour in case of AC mode and switch to red colour on battery signifying AC failure etc. complete as reqd. (Make: PROLITE/ OPTOLITE / EVERLITE)

P/F/T/C of Egress Edge lit Light Double Sided ( 2 x 4 mm thick) transparent acrylic sheet having monogram / instructions etched to acquire maximum light with LED’s (30 Nos. approx.) placed in top mounted suitable size 18 SWG, MS box duly powder coated in white colour and equipped with power supply, battery charger, overcharge protection facility and suitable 6 volt 1.3 AH lead acid dry cell battery to provide at least 8 hours backup including dismantling of existing worn-out signage if required. The board shall glow in green colour in case of AC mode and switch to red colour on battery signifying AC failure etc. complete as reqd. (Make: PROLITE/ OPTOLITE / EVERLITE)