MISC PETTY REPAIR WORK OF CERTAIN LOCATIONS UNDER AGE B/R - II OF GE (WEST) BAREILLY.

Amount

S&F 15 mm bore tubes medium grade galvanised iron with all new fitting and fixed to walls and ceiling or laid in floors including taking down old unserviceable steel tubing with fittings & cutting chases for concealed water tubing and making good with cement mortar, cutting exceeding 20cm girth where requiired complete all as specified and directed.

S&F 20 mm bore tubes medium grade galvanised iron with all new fitting and fixed to walls and ceiling or laid in floors including taking down old unserviceable steel tubing & cutting chases for concealed water tubing and making good with cement mortar, cutting exceeding 20cm girth where requiired complete all as specified and directed.

S&F in repairs Vitreous china wash down water closet (pedestal pattern) white complete, including connection to drain pipe and to flushing pipe antisyphonage pipe etc complete all as specified and directed

S&F in repairs vitreous china Orissa pattern IWC size 580x440mm white with integral foot rest complete including trap. complete all as specified and directed

S&F in repairs plastic water closet white seat cover closed pattern with flat bottom cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed

S & F in repairs PVC low level flushing cistern of capacity 10 ltrs with inlet, ball valve, float and handle including brackets and flush pipe of PVC 32mm dia complete all as specified and directed.

S&F in repairs Vitreous china wash basin white flat back 550mm x 400mm excluding tap, waste, chain & plug but including brackets complete all as specified and directed

S&F in repairs waste fitting 32 mm dia brass chromium plated for glazed ware sinks/basins etc with long screwed shanks and fly nuts flange and bedded in red lead cement and other end fixed complete all as specified and directed

S&F in repairs PVC waste pipe 25 mm dia 750 to 800mm long fixed to waste fitting of wash basin including socket suitable for waste fitting complete all as specified & directed

S&F in repairs centre hole basin mixture 15 mm dia chromium plated complete all as specified and directed.

S&F in repairs chromium plated fancy type stop vlave /angle valves/ two way angle valve with cup cast copper alloy screwed down high pressure, screwed both ends for iron pipes or for unions for 15 mm bore pipe complete all as specified and directed.

S&F in repairs chromium plated fancy type long body bib taps with cast copper alloy screwed down, screwed for iron pipe or for brass ferrule for 15 mm bore pipe complete all as specified and directed.

S&F in repairs 100 mm dia shower rose of Chromium plated brass for fixing 15 mm pipe with shower arm size 195 mm long with bend of 45 degree with flange complete all as specified and directed.

S&F in repairs chromium plated wall mixture with connection for shower arragement complete all as specified and directed.

S&F in repairs water jet for EWC chromium plated with PVC connection complete all as specified and directed.

S&F CP heavy duty extension pieces 15mm bore and 25 mm long in repairs. complete all as specified and directed

S&F in repairs hand shower (health faucet) 1 mtr PVC tube with wall hook complete for ETWC complete all as specified and directed.

S&F in repairs PVC connections 15mm dia & 450mm long with PTMT nuts complete all as specified and directed.

S&F in repairs Chromium plated toilet paper stand as per directed by engg-in-charge

S&F in repairs Chromium plated towel ring as per directed by engg-in-charge

S&F in repairs glass shelf with chromium plated brackets of suitable size as per directed by engg-in-charge

S&F in repairs Butt hinges, medium weight, Stainless steel and fixed of size 100mm. complete all as specified and directed

S&F in repairs aluminum anosided barrel tower bolts 150mm long, of extruded section and fixed. complete all as specified and directed

S&F in repairs aluminum anosided handle 150mm long of extruded section and fixed. complete all as specified and directed

S&F in repairs Stainless steel handle 150mm long complete (design and pattern will be approved by GE complete all as specified and directed

S&F in repairs 300mm size aluminium alloy anodised sliding door bolt with hasp & staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolt and sliding bolt of extruded section or cast alluminium alloy complete all as specified and directed.

S&F in repairs 200 mm long MS ordinary rat tail rod pattern springs including roller & roller plate complete all as specified and as directed.

S&F in repairs Bib tap (15 mm)standard of PTMT any colour high pressure screwed for iron pipe and screwed complete all as specified and directed

S&F pillar tap (15 mm)standard of PTMT any colour high pressure screwed for iron pipe and screwed complete all as specified and directed

S&F stop cock/ angle valve (15 mm)standard of PTMT any colour high pressure screwed for iron pipe and screwed complete all as specified and directed

S&F in repairs Vitreous china counter top wash basin snow white oval size 560mm x 400mm including PVC waste pipe, PVC connection 450 mm long ,32 mm bore CP waste coupling ,china & plug, brackets etc complete all as specified and directed

S&F in repairs Vitreous china wash down water closet single piece-WC with UF seat cover, hinges, fixing accessories, cistern fittings, size 655x665x760, S trap-300mm including connection to drain pipe etc complete all as specified and directed.

M & L in repair Wall out let Dia 30 mm ,40 mm long round shape with 15 mm thread to connect hand shower pipe and flange complete all as specified and directed .

M & L in repair Sliding rail 19 mm dia and 600 mm long round shape with hand shower holder and soap dish complete all as specified and directed .

M & L in repair Hand shower 75 mm dia cylindrical shape multi flow (Normal ,massage and mist) ( ABS body chrome plated with grey face plate ) with rubit cleaning system complete all as specified and directed . Hindware Model No F160053, Cera Cat Part No :-F7030308AB, Kerovit Cat Part No:- KA520008 & Asian Paints Cat Part No HS-208.

M & L in repair towel rail 600 mm long of complete all as specified and directed

S & F in repairs Stainless steel soap dish complete all as specified and directed

M & L for 16-18 mm thick Green Marble, machine cut & polished, bedded and jointed in grey cemet slurry including rounding edges and making hole where required and laid over 15 mm cement mortar bedding including demolition of old tiles complete all as specified and directed.

S&F in repairs vitreous china urinals bowl type flat back, white 465 x 355 x 265mm with grating, union for discharge and waste pipe but excluding flushing cistern complete all as specifed and directed.

S&F in repairs for CP spreader for urinals complete all as specified and directed

M&L PCC 1:2:4 type B-0 (using 12.50 mm stone aggregate) as in, levelling course with to be finished even and fair without using extra cement on roof surface / chajja (thickness of concrete will be provided as per site requirement and as directed by engr-in-charge) complete all as specified and directed.

M&L in repairs POP false ceilig includng GI framing, main member C shaped spacing not exc 1m c/c having weight 300 to 350 gm per RM and cross member U shaped spacing exc 500 mm c/c having weight 250 to 300 gm/RM and C section fixed on parameter wall with screws and rawl plug including hanging arrateement to RCC slab wth L shape member exc 105 m (wieght not less tha 120 gm/RM) and wire mesh of dia 0.50 to 0.56 mm weight not less than 350 gm/sqm fixed with steel screws of GI framing and applying two coat of luxury emulsion (Royal) and including plaster of paris fancy moulding pattern in corners of ceiling in triangular or any shape of size 75 mm x 75 mm including finished upto the required mark complete all as specified and directed

Taking down chowkats with shutter (without taking off shutters from the frame) n.exc 1.5 Sqm each complete all as specified and directed

Taking down chowkats with shutter (without taking off shutters from the frame) exc 1.5 Sqm and n exc 4.0 sqm each complete all as specified and directed

Taking down shutters of any description n.exc 1.00 Sqm each all as specified and directed.

Taking down shutters of any description exc 1.00 Sqm and nexc 2.0 sqm each all as specified and directed.

S & F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, S & F in opening as per manufacturers instructions and as directed by Engineer-in-Charge.

Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style)consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame as per manufacturers instructions and as directed by Engineer-in-charge.

S & F pressed steel frames for doors size 105x60 with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as specified.

S & F pressed steel frames for doors size 125x60 with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as specified.

M&L for PCC for filling hollow of steel frames and hold fast of frames, levelling course and similar work etc type B0 (1:3:6 )(using 12.5mm graded aggregate etc complete all as specified and directed.

S&F for 30 mm thick flush shutter, solid core construction with block board core and ply wood face panels, commercial type on both side, complete all as specsified & directed.

S &F 2nd class hardwood 35mm thick glazed and skeleton shutters open rebated and prepared to receive glass gauze etc divided into squares, with plain, chamfered or rounded mitred and rebated sash bars any number edges of framing plain, chamfered or rounded, fitted with cut and metered beads for securing glass etc size of members of shutters as specified in SSR Part I Sec 8 clause 8.20 (a) complete all as specified.

S & F for 30 mm second class hardwood for Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified.

S&F steel windows with pressed steel frame (size 95 x 45 x 1.25 mm ) side hung shutter including box type hinges with steel handle and steel peg stay with glazed openable shutter with glazing bar ( open out side ) and wire gauged openable shutter without glazing bar ( open inside ) dovetailed or welded complete all as specified and all as per DRG No TD/088 dt 07 Jan 2002 Note :- (i) Two shutters ie wire guaged and glazed shall be fixed in one composite frame and both shutter shall be measured as one unit (II) rate for filling PCC in frame deemed to be included in quoted rates (iii) MS grill shall be measured and paid seperatly under relevant item of schedule.

S & F steel window or ventilator fixed type glazed bar all as specified and directed.

S & F in repairs 2nd class hard wood in fillets, square, rectangular in section wrought, secured with nails sectional area exc 13 Sq cm and n.exc 25 Sqcm fixed in repairs all as specified and directed.

S&F in repairs 19mm thick prelaminated particle board solid core construction with block board core and plywood face panels commericials type on both sides.

S & F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified and as directed.

S & F 200 mm long Aluminium anodised, handle of extruded, fabrictated type section and fixed all as specified and as directed.

S & F 200 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed all as specified and as directed.

S & F 150 mm long Aluminium anodised, handle of extruded section fabrictated type and fixed all as specified and as directed.

S & F 150 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed all as specified and as directed.

S&F Mild steel butt hinge 100mm long medium weight, mild cold rolled mild steel, and fixed complete all as specified and as directed

S & F stainless steel butt hinges 100mm long with stainless steel hing pin complete all as specified and directed.

S & F 300mm long MS ordinary rat tail rod pattern springs including roller & roller plate complete all as specified and as directed.

S & F in repairs 300mm long MS ordinary rat tail rod pattern springs including roller & roller plate complete all as specified and directed.

S&F in repairs hydraulic door closer regulated design No 3 universal type suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and aluminium (extraded section body) complete all as specified and directed.

Supply and fixing in repairs brass mortice lock, vertical type, size 65mm, 4 Levers with escutcheon plates & two keys fixed in aluminium frame complete all as specified and directed.

Repair of aluminium door/window/ ventilator/ partition wall etc of any size / any number of panels including taking down (if required) & refixing for easy closing/ opening/ tightening of hinges or changing the position of hinges, adjustment of floor door spring of hydraulic door closure, adjustment of tower bolts, sliding bolts etc changing of mortice lock complete all as specified and directed.

M & L for preparation of new wooden surfaces of any description ,not other wise described over 10 cm width or girth applying 2 coats of synthetic enamel paint over a coat of pink primer all as specified and directed.

M & L for preparation of new steel surfaces and applying 2 coats of synthetic enamel paint over a coat of red oxide zink chrome primer complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden or matel frames or stones, concrete or brick surrounds, glazed with putty or fixed with beads complete all as directed.

S & F 3 mm thick sheet glass ordinary quality fixing with putty or MS steel beading with screws/ welding in square n.exc 0.5 sqm in each pane all as specified and directed.

All as per ser item No 75 above but figured glass, pin head type complete all as specified and directed.

S& fixed as in repairs 5.5 mm thick Plain glass, pin head type and glazing in Aluminium Door/Frames in squares n exc 0.5 sq.m in each pane all as specified and directed.

S & F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with galvanised wire staples all as specified and directed.

S & F fixed in repairs galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with galvanised wire staples all as specified and directed.

S & F MS framed work such as grills or grating etc with ends of bars welded of anysize and any design all as directed of Fe-290 Grade E-165 all as specified and directed.

M&L in repairs 6 mm thick asbestos cement, corrugated or semi corrugated sheets in roofs, walls etc fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.

S&F in repairs prepainted galvanlume aluminium zinc coating GI based corrugated sheet of 0.50 mm th and colour having tensile strength of 550 mpa as in roof covering /callading, riges,to wall fixed with screw including dismantling of existing roof covering as specified and directed by Engr-in-charge

S&F in repairs prepainted galvanlume aluminium zinc coating GI based Plain sheet of 0.50 mm th and colour having tensile strength of 550 mpa as in roof covering /callading, riges,to wall fixed with screw including dismantling of existing roof covering as specified and directed by Engr-in-charge

S&F in repairs aluminium powerded coated (minum 50 micron) anodised partition wall with aluminium frame of size :- (a) Single Groove Section: 82.50 x 38 x 1.20 mm thick (b) Double Groove section: 82.50 x 38 x 1.10 mm thick duly fitted with neosprene rubber beading,frosted glass panes 4.8 mm nominal thickness or 12mm thick prelaminated melamine faced both sides decorative, exterior grade type II particle board panels including securing with 'U' channels at top joining partation complete all as specified.

S&F powder coated aluminium sliding windows frame with movable shutter (sliding on minimum two PVC roller of best quality) for each shutter on three tracks or two track as reuired with stainless steel mosquito proofing and glazing shutter and including glass & stainless steel wire mesh fixed with neoprene rubber gasket with aluminium beading, clips, frame made with aluminium section as appended below- (i) Window frame of minimum size : 92 x38 mm X 1.15 mm thick for three tracks. 63 x38 mm X 1.15 mm thick for two tracks. Note : The rate for glass & wire mesh shall not be paid separately.

M&L in repairs for Aluminium grill of size of grid 75 mm x 75 mm x 5 mm thick and fixed with machine screw and complete all as specified and directed.

S&F Anodised aluminium window, ventilator shutters and kitchen cupboards, side hung type/ slidding type without sash bars, alumimium section weighing 0.55 kg/m including necessary joining cleats glazing clips, ruber packing, anodised aluminium snap beading screws anodised aluminium fittings such as ped stays 150mm long (1 No) hinges type B-21 100mm long (2 No) suitable handle (1 No) complete all as specified for add powder coating (minimum thickness of powder coating 50 micron) complete all as specified and directed.

S&F Anodised aluminium frame for doors, windows, ventilators and kitchen cupboards frame with one or more rebates including joining cleat for fixing etc. complete all as specified add for powder coating (minimum thickness of powder coating 50 micron) complete all as specified and directed.

S&F Anodised aluminium door shutters aluminium section weighing 0.55 kg/m including necessary joining cleats glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified add for powder coating (minimum thickness of powder coating 50 micron) complete all as specified and directed.

S&F Sheet glass, ordinary quality and glazing with oil putty in square but exc0.5 Sqm in each pane 5.5mm thick incl solar control film 25 micron reflected type stcked to glass pane as per instructions of manufacture complete all as specified and directed.

S&F Mortie lock, verticle type size 100 mm mild steel complete all as specified and directed.

S&F in repairs sensor embeded urinal pots including all fittings as directed by engg-in-charge

Repairs to steel windows by replacing all old friction hinges with box type hinges, making the windows functional incl all necessary welding etc as required at site and as directed.

S&F in repairs stainless steel plain baskets 15" wide & 8" in depth for kitchen cabinet complete all as specified and directed.

S&F in repairs stainless steel plain baskets 15" wide & 6" in depth for kitchen cabinet complete all as specified and directed.

S&F in repairs stainless steel cutlary baskets 15" wide & 8" in depth for kitchen cabinet complete all as specified and directed.

S&F in repairs stainless steel large plate baskets 15" wide & 8" in depth for kitchen cabinet complete all as specified and directed.

S&F in repairs stainless steel small plate baskets 15" wide & 8" in depth for kitchen cabinet complete all as specified and directed.

S&F Stainless steel cup & saucer baskets 15" wide & 8" in depth for kitchen cabinet in repairs.

S&F in repairs Stainless steel bottle guard baskets 6" wide for kitchen cabinet in repairs.

S&F in repairs Hydraulic chanels 20" long for sliding of SS baskets in kitchen cabinets.

S & F in repairs stainless steel plate rack not less than 5 Kg complete all as specified and as dirrected.

Demolition of brick or stone / boulder work built in cement mortar as in quoins, arches,pillars etc. complete all as specified and directed.

M&L for Brickwork with sub class 'B' brick old size in CM 1: 6 straight or curved on plan exc 6 m mean radius .complete all as specified and directed.

All as per ser item No 104 above but except brick complete all as specified and directed.

M&L for 25 mm thick cement concrete type B0, 1:2:4 (using 12.5 mm graded stone aggregate) in floors, finished rough to receive floor tiles complete all as specified and directed.

M&L for glazed coloured ceramic tiles 300 x 200x 7 mm mm thick in vertical wall complete or in patches surfaces set and jointed in neat cement slurry and pointed in white cement using pigment to match the shade of tiles incl plastering 10mm thick in CM 1:4, incl dismatling of old tiles & removing the rubbish off the premises complete all as specified and directed.

M&L for glazed coloured ceramic tiles 450 x 300 mm x 7 mm mm thick in vertical wall complete or in patches surfaces set and jointed in neat cement slurry and pointed in white cement using pigment to match the shade of tiles incl plastering 10mm thick in CM 1:4, incl dismatling of old tiles & removing the rubbish off the premises complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectingular)area of each tiles exceeding 0.11 Sqmbut not exceeding 0.18 Sqm (400 x 400mm) as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screeding 15mm thick in CM 1:6, incl dismatling of old tiles & removing the rubbish off the premisescomplete all as specified and directed.

All as per Serial item No 109 above but as in vertical surfaces incl plastering 10mm thick in CM 1:4 complete all as specified and directed.

M&L for vitrified Ceramic tiles light shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm( 600 x 600 ) in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement incl screeding 15mm thick in CM 1:6, incl dismatling of old tiles & removing the rubbish off the premisescomplete all as specified and directed.

All as per serial item No 111 above but as in vertical surfaces incl plastering 10mm thick in CM 1:4,complete all as specified and directed.

S&F 16 to 18 mm thick granite stone slabs mirror polished of colour and shade as approved by GE, machine cut bedded & jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade of granite stone fixed as in steps, jambs, pillars window cills, cooking platforms & the like over a scree bed of 15mm thick CM 1:6 etc incl dismatling of old tiles & removing the rubbish off the premises complete all as specified and directed

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

S & F in repairs wooden flooring (make signature) size 1215 x 195 mm and thickness 8.3 mm direct pressure laminated according to EN 13329 for glueless installation heavy domestic and light commercial use EN 13329 lavel of use 22 including under layer of 2 mm EP and polythene layer complete all as specified and directed.

S & F repair wall panelling of plastic vinyl composite of size 3050 x 254 x 8 mm thick with wooden/plane surface waterproof , termite proof, chemical resistant of light weight fixed with wooden screw with rawl wall plug complete all as specified and directed.

S & F in repairs vertical venetian blind of 100 % polyster of width 100 mm and thickness 0.45-0.63 mm with tolerance (+- 0.04mm) of light grade 4-6 with aluminium channel complete all as per manufacturer instructions and as directed.

S&F in repairs 20 mm dia Stainless Steel fancy type drapery curtain rod with brackets and lattu & other connected accessories etc complete all as specified and directed.

M&L for rendering 12 mm thick cement plaster on new brick surfaces or concrete surfaces in CM (1:6) including finishing the surface even and fair and complete all as specified and directed.

M&L rendering 15 mm thick cement mortar on walls of new brick or concrete surfaces in cement mortar 1:4 with water proofing compound, incl finish even and fair w/o using extr cement and then up to height of 3 floors incl necessary scaffolding complete all as specified and directed.

M&L for rendering 12 mm thick cement plaster on brick surfaces or concrete surfaces in CM (1:6) including finishing the surface even and fair and including taking down existing defective cement plaster on brick or stone masonary complete all as specified and directed.

M&L rendering 15 mm thick cement mortar on walls brick or concrete surfaces in cement mortar 1:4 with water proofing compound, incl finish even and fair w/o using extra cement including taking down cement plaster on brick wall/stone wall, ceilings etc, racking out joints, hacking for key & scrubbing with water, up to height of 3 floors incl necessary scaffolding complete all as specified and directed.

M&L for rendering 5 mm thick cement plaster on fair faces of bricks or concrete in ceiling / chajjas using CM 1:3 finished even and smooth without using extra cement including taking down cement plaster on brick wall/stone wall, ceilings etc, racking out joints, hacking for key & scrubbing with water, including three coat of white wash on ceiling surfaces completely all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed

M&L for preparation of new plastered surfaces of walls and applying two cement base paint over a coat of primer complete all as specified and directed

M&L Preparation of old decorated surfaces and applying two coat of white wash on walls surfaces and rubbing down with sand paper to have even and smooth surfaces all as specified & directed by Engr-in-Charge.

M & L applying one coat of distemper oil emulsion white or tinted on old decorated or undecorated wall surface including preparation of surfaces by washing rubbing down and stoping of distempered and painted surfaces complete all as specified.

M & L applying one coat of cement based paint on old decorated or undecorated wall, roof surface including preparation of surfaces by washing rubbing down and stoping of distempered and painted surfaces complete all as specified.

S&F in repairs PVC boards 19/20 mm thick any colour/ prelaminated as in cabinets incl shelves and shutters, fixed with screws and adhessive as per direction of Engr-in-Charge and, manufacturer's instructions including piano hinges, magnet catcher, handles etc. complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

M&L for preparation of old painted steel/ iron surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint upto height of 3 re floor incl necessary scofolding complete all as specified and directed

M & L for machine pressed precast 60mm thick interlocking paver block (M-35) cement concrete tiles (Coloured) of approved design & pattern as approved by GE, set over & including disamntling of old tiles and providing 50mm sand cushion complete all as specified and directed.

M&L for chequered cement concrete rubber moulded coloured tiles 30cm x 30cm x 25mm thick with grey cement and no pigment, set, jointed and pointed in neat cement slurry in floors including 15 mm screed bed in CM 1:6 incl dismantling if existing tiles complete all as specified and directed.

M & L for 75 mm thick PCC 1:4:8 , Type D2 (Using 40 mm graded stone aggregate) as in Sub base, paving, under floors etc finished even and rough incl demolition of concrete complete all as specified and directed.

Notes:- (a) Materials not included in sch of credit and debris from the dismantling shall be the property of department. The same shall be removed/ disposed or deposited by the contractor in MES stores yard of GE (West) Bareilly as directed for which no additional payment shall be made. The contracotor shall be fully responsible to safe guard these materials against losses/theft/deterioration etc till the same are deposited by him in MES Store yard. (b) The contractor or his authorised representative shall attend office of AGE B/R daily at 0830 hrs on all working days to take orders/instructions regarding the jobs to be done. A proper record of jobs ordered and completed shall be entered in a register duly signed and dated by Engineer-in-Charge and contractor.

Notes:- (c) Penalty shall be imposed on the contractor for not completing the jobs in time bound manner as under :- (i) Not completing the jobs requiring one tradesman within 24 hrs - Rs 300/- per day per job (ii) Not completing the jobs requiring two tradesman within 48 hrs - Rs 500/- per day per job. (iii) Not completing the jobs requiring more than two tradesman within 7 days - Rs 1500/- per day per job (d) The rates quoted by the tenderer shall be deemed to include the above aspects. (e) Tenderers may note that amount as given in schedule of credit will be deducted from the total amount to worked out the net contract sum at the time of Acceptance of tender.

RIYASAT ALI KHAN (BID ID -3366104)

M/S Harshri Nath Enterprises (BID ID -3358336)

multiple alliance enterprises (BID ID -3365644)

REHAN CONSTRUCTIONS (BID ID -3365133)