COMPLETION OF BALANCE WORK FOR CONSTRUCTION OF DWELLING UNITS INCLUDING ALLIED SERVICES FOR OFFICERS JCOs and ORs AT BARRACKPORE KANKINARA and KANCHARAPARA

Amount

SCHEDULE "A" SECTION I (BUILDING WORK) Completion of incomplete work of Construction of Block of 24 (Twenty Four) dwelling units for ORs (S+6, 4 DUs / Floor), R.C.C. framed structure, including Piles, plinth protection, stilts showings all structures at ground floor, steps , ramps, platfroms, lift wells & main/ fire escape staircases, common passages & lobbies, balconies, RCC lofts wardrobes/ cup-boards with built in furnitures kitchen platfrom, service shafts, covering to open to sky ducts , RCC fire/service OH tanks etc complete all as specified and shown on drawings, at BGTC, Barrackpore. Note:- This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col.5 signifies this fact only.

OR's Block-1 at BGTC, Barrackpore Note : The details of work executed in percentage in terms of yardstick, balance work 2.37% in that yardstick, detailed status of work and photograph of block is enclosed in bid documents.

OR's Block-2 at BGTC, Barrackpore Note : The details of work executed in percentage in terms of yardsticks, balance work 3.65% in that yardsticks, detailed status of work and photograph of block is enclosed in bid documents.

OR's Block-3 at BGTC, Barrackpore Note : The details of work executed in percentage in terms of yardsticks, balance work 7.50% in that yardsticks, detailed status of work and photograph of block is enclosed in bid documents.

OR's Block-4 at BGTC, Barrackpore Note : The details of work executed in percentage in terms of yardsticks, balance work 7.50% in that yardsticks, detailed status of work and photograph of block is enclosed in bid documents.

OR's Block-5 at BGTC, Barrackpore Note : The details of work executed in percentage in terms of yardsticks, balance work 11.00% in that yardsticks, detailed status of work and photograph of block is enclosed in bid documents.

SCHEDULE "A" SECTION I (BUILDING WORK) Completion of in complete work of Construction of Block of 24 (Twenty four ) dwelling units for ORs (S+6, 4 DUs / Floor), R.C.C. framed structure, including Piles, plinth protection, stilts showings all structures at ground floor, steps , ramps, platfroms, lift wells & main/ fire escape staircases, common passages & lobbies, balconies, RCC lofts wardrobes/ cup-boards with built in furnitures kitchen platfrom, service shafts, covering to open to sky ducts , RCC fire/services OH, tanks etc complete all as specified and shown on drawings, at Supply Depot, Barrackpore. Note:- This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col.5 signifies this fact only.

OR's Block-2 at Supply Depot, Barrackpore Note : The details of work executed in percentage in terms of yardsticks, balance work 30.98% in that yardsticks, detailed status of work and photograph of block is enclosed in bid documents.

OR's Block-3 at Supply Depot, Barrackpore Note : The details of work execute in percentage in terms of yardsticks, balance work 31.78 % in that yardsticks, detailed status of work and photograph of block is enclosed in bid documents.

OR's Block-4 at Supply Depot, Barrackpore Note : The details of work executed in percentage in terms of yardsticks, balance work 17.02% in that yardsticks, detailed status of work and photograph of block is enclosed in bid documents.

OR's BLOCK-5 at Supply Depot, Barrackpore Note : The details of work executed in percentage in terms of yardsticks, balance work 18.72% in that yardsticks, detailed status of work and photograph of block is enclosed in bid documents.

OR's BLOCK-6 at Supply Depot, Barrackpore Note : The details of work executed in percentage in terms of yardsticks, balance work 30.21% in that yardsticks, detailed status of work and photograph of block is enclosed in bid documents.

SCHEDULE "A" SECTION I (BUILDING WORK) Completion of in complete work of Construction of Block of 20 (Twenty) dwelling units for ORs (S+5, 4 DUs / Floor), R.C.C. framed structure, including Piles, plinth protection, stilts showings all structures at ground floor, steps , ramps, platfroms, lift wells & main/ fire escape staircases, common passages & lobbies, balconies, RCC lofts wardrobes/ cup-boards with built in furnitures kitchen platfrom, service shafts, covering to open to sky ducts , RCC fire/service OH tanks etc complete all as specified and shown on drawings, at Supply Depot, Barrackpore. Note:- This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col.5 signifies this fact only.

OR's Block-1 at Supply Depot, Barrackpore Note : The details of work executed in percentage in terms of yardsticks, balance work 25.37% in that yardsticks, detailed status of work and photograph of block is enclosed in bid documents.

OR's Block-7 at Supply Depot, Barrackpore Note : The details of work executed in percentage in terms of yardsticks, balance work 19.89% in that yardsticks, detailed status of work and photograph of block is enclosed in bid documents.

SCHEDULE "A" SECTION I (BUILDING WORK) Construction of Guard Room of size 4500x3500 mm (externally) with load bearing walls and foundation including RCC roof, verandah, toilet, black granite counter etc complete as specified and shown on drawings. Note:- This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col.5 signifies this fact only.

Barrackpore- BGTC Site Note: The details of work executed in percentage in terms of yardsticks is NIL balance work 100%.

Supply Depot site Note :-The details of work executed in percentage in terms of yardsticks is NIL balance work 100%.

SCHEDULE "A" SECTION I (BUILDING WORK) Construction of Garbage Bin in load bearing foundation and brick masonry including steel gate, saucer drain etc, complete as specified and shown on drgs. Note:- This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col.5 signifies this fact only.

Barrackpore- BGTC site Note :- The details of work executed in percentage in terms of yardsticks is NIL balance work 100%.

Supply depot site Note :-The details of work executed in percentage in terms of yardsticks is NIL balance work 100%.

List of works & Prices for Internal Water Supply Works, Sch A Sec-II

List of works & Prices for Internal Electricafication, Sch A Sec-III

List of works & Prices for Lightining Conductor Works Sch A Sec-III -A

List of works & Prices for Raod, Path & Culvert Work Sch A Sec-IV

List of works & Prices for Area Draiange Works, Sch A Sec-V

List of works & Prices for Boundry Wall, Fencing, Cattle Trap, Gate Sch A Sec-VI

List of works & Prices for Street Ligthing Works , Sch A Sec-VII Note:- This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col.5 signifies this fact only.

M & L steel tubular swaged poles complete with cast iron base plate final taper plug, bolts, nuts, and screwes as specified in type 410SP31-9 Mtr. Long with top bend section to fix street light luminaries

Earthing with galvanised steel pipe electrode, 40mm bore medium grade, 2.5 meters length, buried directly and preferably vertically in ground with top edge not less than 1.25meters below ground level connected with earthing lead of 4mm dia galvanised iron or steel wire all as shown in plate No.4 to earthing test point all as specified and indicated including testing complete.

Earth continuity conductor or main earthing lead burried in ground or drawn in conduit/ pipe or fixed to poles or anyother indicated situation for loop earthing etc as required of 4mm dia galvanised iron.

Cement concrete in foundations, filling and mass concrete type D2 1:4:8 (40 mm graded aggregate) Cement concrete , rounded or charmfered on edges for pole foundation.

Material and lying PCC (1:2:4) TYPE B1 using aggregate 20 mm grade stone aggregate in copping for pole including finishing the exposed surface using extra cement all as per specification.

Providing & fixing 40 mm dia GI pipe light grade sleeve 1.2 m long partly in ground and partly along the existing pole, bending etc. as required.

Sand cushioning up to 250 mm for cables in above excavation.

Supplying & laying bricks for cable cover with flat as per specification.

Supply and laying four core aluminium conductor XPLE insulated 1.1 KV armoured cable 16 Sq.mm. burried in ground.

Supply & Fixing of cable terminals, with bus bar and 6A SPN MCB, fixing arrangement to pole including making inter connections with the fixtures complete as required.

Supplying & drawing 3*2.5sq.mm, PVC insulated copper conductor single core wire in the existing steel pole and making connections as required.

Supply & fixing of street light fitting as per or equivalent to Philips Cat. NO CRP-330/SON - T150 complete with control gear, 150w HPSV lamp, complete inlcuding fixing clamps and pipe / nipple suitable for mounting fitting on pole and supply and fixings lamp complete as specified and as directed by Project Manager.

Supply & Fixing post top lantern suitable for 18 watt, CFL lamp as per specs. Complete with GI pipe 50mm dia and mounting arrangement complete as approved by PM.

Supply & Fixing junction Box for street light poles made out 2mm thick CRCA sheet phosphotised powder coated suitable size to accommodate loop in loop out cable terminal including TPN aluminium bus bar 63 AMPS capacity & 1 No 6 AMP SPN MCB complete with fixing arrangement to poles with 2 Nos 25x3 mm flat iron clamps and shutter to be open / closed vertically with retained ball locking system.

Design, Fabrication, supply, installation, testing & commissioning of 415V, 3 phase, 50 Hz strret light panel dust, vermin and weather proof outdoor type IP 54 rating, 2.0mm thick CRCA sheet enclosure and hinged and lockable door with components as below complete as required or following rating having provision for Auto/ Manual opertaion. The panel shall be complete with all interconnections, internal wiring with copper wire of suitable size , labels ect suitable for mounting. INCOMING (a) 63 Amp TPN MCCB with thermo magnetic O/C, S/C & E/F release 35 KA breaking capacity (b) 100 Amps AI Bus bar (c) 24 Hrs –timer switch with contract suitable for 100%, 66 %, 33% lighting control” OUTGOING (a) 63 TPN MCB -1No (b) 6 AMP single ploe MCB-1No (c) Lamp holder with wiring (light point) (d) Cable & termination for connections (e) Street light Panel complete as per above requirements”.

Earthing complete with galvanised steel earth plate electrode 600*600*6mm thick burried directly in ground not less than 2.25m deep below ground level with top edge of the plate not less than 1.5m below ground level connected to galvanised iron strip 32x6mm earthing lead by means of volts, check nuts & vashers of galvanised iron as shown in drawings. Erath pit & trench connected to earthing alla s specified & including excavation, earth work of any type of soil & removal of surplus soil, PCC pit with cover withh lifting hook nlocking arragement, funnel with watering pipe, wire mesh, charcoal & salt etc. including teasting.

List of works & Prices for Solar Heating System Works , Sch A Sec-VIII Note:- This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col.5 signifies this fact only.

Supply, erection, testing & commissioning of 300 LPD solar water heater system with panel, valve, storage tank complete including cutting & Making good the floors/walls wherever reqd. with SS-304 instead of hot water storage tank of 300 liters and control panel including all inter connecting SS-304 piping complete all as specified and shown on drawings and as directed by Project Manager

Supply, erection, testing & commissioning of 250 LPD solar water heater system with panel, valve, storage tank complete including cutting & Making good the floors/walls wherever reqd. with SS-304 instead of hot water stroage tank 250 liters and control panel including all inter connecting SS-304 piping complete all as specified and shown on drawings and as directed by Project Manager

S&F rotational moulded double layered HDPE water storage tank (cylindrical vertical with closed top) 300 liters capacity hoisted and fixed in position complete all as specified and directed by Project Manger.

S&F ball brass valves, high pressure with polythene float & flynut including ferrule and all accessories complete, serewed for 20mm bore dia iron pipes and fittings or brass ferrule, complete all as specification and as directed by Project Manager.

S&F 20mm dia gun metal globe or gate valve with iron wheel head, screwed both ends for G.I. pipes & fittings complete all as specification and as directed by Project Manager.

S&F 40mm dia gun metal globe or gate valve with iron wheel head, screwed both ends for G.I. pipes & fittings complete all as specification and as directed by Project Manager.

S&F 15mm dia gun metal globe or gate valve with iron wheel head, screwed both ends for G.I. pipes & fittings complete all as specification and as directed by Project Manager.

M&L of GI pipe 20mm dia plumbing from cold water tank complete for each DU's all as specification and as directed by Project Manager.

M&L of GI pipe 40mm dia with PUF rockwool.nitryl insulation from hot water tank for each DU's as specs and as directed by Project Manager.

M&L of GI pipe 15mm dia with PUF rockwool.nitryl insulation from hot water tank for each DU's as specs and as directed by Project Manager.

M&L of GI pipe 20mm dia with PUF/ Rockwool/Nitryl insulation from hot water tank for each DU's all as specified and directed by Project Manager.

M&L of GI pipe 40mm dia with PUF,rock wool,nitryl insulation from hot water tank for each DU's all as specified and directed by Project Manager.

Bib taps, cast copper alloy with crutch or butterfly handle screwed down complete fancy type 15mm dia all as specified and directed by Project Manager.

List of works & Prices for Fire Fighting System Works, Sch A Sec-IX Note:- This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col.5 signifies this fact only.

Supply and fixing of single headed stainless steel ISI marked oblique pattern hydrant landing valve with 80mm dia flanged inlet 63 mm dia instantaneous type female outlet complete with ABS blank cap and G.I,chain, twist release type plug and all accessories as specified and shown on drawings and as directed by Project Manager.

Supply,Installation &testing of Non percolating flexible hose (RRL type-A) ISI marked (IS:636) 63mm dia 2 x 15 M long complete with instantaneous type stainless steel SS-304,63mm dia is marked Male & female coupling (IS:903)bound & rivetted to hose pipe with S.S rivets &1.5 mm s.s wire as specified and shown on drawings & as directed by Project Manager.

Supply, installation & testing of stainless steel SS-304,63mm dia short size branch pipes with 20 mm dia nozzels with 63mm instantaneous coupling ISI marked (IS:903). Specified and shown on drawings and directed by project manager .

supply installation & testing of First Aid Fire hose Reel wall mounting swinging type drum (Make:Newage /superex) bracket 25mm dia Ball valve &20mm.36mm long high pressure Hose Reel tubing as per IS:444 with Gunmetal shut off nozzle having 5mm dia orifice . The hose rell shall strictly confirm to IS:884-1985 AS specified & shown on drawings & as directed by project manager.

supply installation & testing of M.S. fire hose cabinet fabricated 16 g M.S sheet of fully weded construction with hlnged double front door with locking arrangement full glass door 4mm thick approved by local fire aurthority painted with one coat of primer stove enamelled fire red finished fire hose written on front suitable to accomodate 1 hydrant landing valve 1 fire hose reel 2nos. 15m long 63 mm. dia hose 1 branch pipe 1 fire- man's axe, including suitably mounted on a raised masonry platform as required (approx size0.9mx 2.1mx 0.6m)as specified as shown on drawings and as directed by Project Manager.

supply, installation & testing of Mild steel pipe(IS 1239part 1) heavy class including threading welding etc . Bends elbows reducers unions flanges rubber clamps G.I .nuts bolts washer hangers etc .including all necessary pipe support cutting to size drilling welding / fixing and welding insert plats in RCC structurel members wherever requlred flxing the pipe on wall /floor/ceillng using anchor fastners G.L pipo sleeves of higher dia shall be provided wherever the plpes are crossing the wall or floores and sealing the sleeve with glass wool and fire sealent cutting holes in brick or RCC walls / slabs and making good the same complete including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade including . as directed by project manager. For Hydrant Hose Reel Piping (a) 100mm dia MS pipe

All as per item No 14.06 here in before but for 80mm dia MS pipe

Supply and fixing Gun-Metal Fire Bridge Connection (Suction collecting head)consisting of 63 mm dia instantaneous type male coupling with built in check valves &150 mm dia. Flanged outlet with bolts Nuts & rubber insertions as required as specified & shown on drawings & as directed by Project Manager. a) Three Way

Supply Installation &testing C.I Dual plate wafer type non-return valves (PN 1.6) duclite iron dise 416 SS stem EPDM lining ,S.Steel spring complete with 2NOS. Matching flanges rubber insertion ,nuts, bolts ,& washer etc. of following sizes as specified & as directed by Project Manager a) 100 mm. Dia

Supply installation & testing cast iron wafer type butterfly valves Class(PN1.6)SS 304 disc Nitrile/ EPDM/ Neopreme/ lining (lever operated upto 150mm &gear Operated upto 150mm & gear Operated upto 200mm&more) complete with 2 Nos Matching flanges rubber insertion nuts bolts & washer etc. of following sizes as specified & shown on drawings &directed by Project Manager a) 100mm dia nominal bore

Supply & fixing forged brass Ball valve with SS ball & PTEF teflon seats & seals full bore spindle type M.S plate handle with PVC sleeve confirming to I.S 9890 class 125 female BSP threads suitable for 15 kg /sq cm. complete in all respects as specified & shown on drawings & directed by PM. a)25 mm dia nominal bore

All as per Item No 14.11 here in before but 50mm dia nominal bore

Supply & fixing dial type Pressure gauge with ball valve & pipe at hydrant station complete in all respects. Dial dia 100 mm , callibration 0-15 kg/sq cm. valve shall be paid seperatly as specified & shown on drawings drawings & as directed by project Manager. a) 20mm dial nominal bore

Supply & fixing standard fireman's axe with heavy insulated rubber handle confirming to I.S 926 complete specified & shown on drawings & directed by project managr.

supply installation testing &commissiong of TAC approved electric motor driven Main Fire Pump set suitable for automatic operation consiting of the following. a).pump shall be of centrifugal multistage type. Horizontal end suction .single cast iron body bronze impeller & wear ring stainless steel shaft sleeve directlydriven by electrical motor as per NBC -1983 for fire fighting suitable for delivery of 900 LPM against total head of 35 M complete with necessory pressure guage with GM cock on delivery side including bypass arrangement (with 50 mm dia valve and 5 mtr GI medium pipe) for periodical testing of pump set . b).squirrel cage induction motor confirm to IS 325-1978 SUITABLE FOR OPERTION AT 415V/-15%, 3 phase 50Hz +/-5% AC supply,totally enclosed , fan cooled type and confirming to protection clause IP 55 as per IS 4691 & insulation class shall be 'F' c) Common base plate for mounting pump and motor fabricated out of MS channel , as per manugacturer recommendation. d).suitable RCC for pump & morter foundations as per manufacturer design complete with anti-vibration pads

Supplying & laying testing &commisssioning PVC insulated pvc sheated armoured aluminium conductor 1.1KV grade on surface as required . a) 4x16sq.mm

Supplying &making ans end termination with brass compressin glance and aluminlum lugs of folliong size PVC insulated , pvc sheated armoured aluminium conductor 1.1KV gade on surface as required . a) 4x16sq.mm

Supplying & laying testing & commisssioning preessures suitable for opertating with hydrant system for wrking pressure of 14kg/sq.cm. including electrical control wiring with suitable rating PVC insulated armoured copper conductor cable upto control panel,connection as required.

Supply and fixing C.I 'Y' suction strainer with stainiess steel pertorated sheet screen , flanged ends iner installed outside water tanks a) 100 mm dia

Supply and fixing double flanged vertical air vessel fabricated shell frim 8mm thick & dished ends 10mm thick M.S .plate 250 mm dia and 1.50m high common for fire terrace pump complete with pressure switches to opperate the pump at drop of pressure finished with two coats of red enamel pint of first grade over one coat of primer externally & two coats of epoxy coating inside.

Supply and fixing reseelient rubber neoprene lined single arch vibration eliminators suitable for raw water upto 45 deg C temperature, working pressure 7 kg and test pressure 14kg per sq.cm a) 100mm dia

Providing fixing 8 SWG GI wire in surface or in recess for loop earthing as requlred .

Supply & insallation Fire extinguisher water stored pressure type 9.0 ltrs.capacity as per IS 6234 portable fire extinguisher

Supply & insallation .Fire extinguisher dry chemical powder (abc IS 14609) stored pressure type 6kg capicty as per IS 13849 portable fire extinguisher

Supply & insallation Fire extinguishre light weight squeeze grip type CO2 5.0kg Capacity as per IS 2878 portable fire extinguisher

Supply & insallation Fire extinguisher machnical foam (m AFFF) type 9.0 ltrs . Capacity IS 10204 portable fire extinguisher

Supply and installation testing and commissioning of manual call point completely recessed (break glass unit) housed in 16 SWG sheet steel housing including siemens /L&T push button swich (spring loaded action ) with NC /NO contacts as per tender requirement / specifications complete all as specified and directed project Manager.

Supply and installation testing and commissioning of dual electronic hooter housed in 16 SWG sheet steel enclosre finlshedin stove enameled post offic red paint sultable for wall/ceilling mounted complete including connection etc . As per tender requrment / specifications complete all as specified and directed by project Manager.

a).supply and installation testing and commissioning of main panel of 6 zones for flre alarm system at security room having facllity of tha indication. Tha panel wall mounted cabinet small be made out of 14 SWG (2mm) thick CRCA sheet as per IS 1289 . The main controll panel should have provision of battery have the arrangment of audio /visual indication by dua lamps for flre & faults in each zone & finshed in slove have seaec nickel cabmium maintance free battery housed in a wooden / plastic box with suporting stand and boost / trickle charger D.C volt meter . short circuit . fire alarm push button for lamp test fire alarm circuits healthy check etc.

b).supply and installation testing and commissioning of main panel of 5 zones for fire alarm system at sucurity room having facillty of the indications . The panel wall mounted cabinet shall be made out of14 SWG (2mm) thick CRCA sheet as per IS 1289 . The main controll panel should have provision of battery have the arrangment of audio /visual indication by dua lamps for flre & faults in each zone & finshed in slove have seaec nickel cabmium maintance free battery housed in a wooden / plastic box with suporting stand and boost / trickle charger D.C volt meter . short circuit . fire alarm push button for lamp test fire alarm circuits healthy check etc.

supply and drawing of following sizes of FR PVC insulated copper conductor single core cable in existing recess/ surace conduit as required. For Size 2 x 1.5 SQ MM

All as per Item No 14.32 above But Size 3 x 1.5 SQ MM

All as per Item No 14.32 above But Size 4 x 1.5 SQ MM

All as per Item No 14.32 above But Size 6 x 1.5 SQ MM

All as per Item No 14.32 above But Size 8 x 1.5 SQ MM

All as per Item No 14.32 above But Size 2 X 4SQ MM

All as per Item No 14.32 above But Size 4 X 4 Sq. mm

All as per Item No 14.32 above But Size 6 X 4 Sq. mm

S/F of following dia. PVC Conduit heavy duty IS marked along with accessories in surface/ recess including cutting the wall and making good the same in case of recess conduit as required (a) 25 mm. dia.

List of works & Prices for Lifts , Sch A Sec-X Note:- This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col.5 signifies this fact only.

13 PASSENGER LIFTS (S+6) Testing, Commissioning etc all as directed by PM MAP and making lift functional all as specified vide 15.01 which has already been installed at site of works. Note :- The accessories which are not installed in the lifts shall be supplied by the Contractor and the rate quoted will be inclusive for supply of such accessories.

8 PASSENGER LIFTS (S+6) Testing, Commissioning etc all as directed by PM MAP and making lift functional all as specified vide 15.01 which has already been installed at site of works. Note :- The accessories which are not installed in the lifts shall be supplied by the Contractor and the rate quoted will be inclusive for supply of such accessories.

List of works & Prices for Site Clearence & Area Development , Sch A Sec-XI

NOTE:- Acceptance Amount shall be worked out after deduction of amount included in Schedule of Credit(Schedule "A" Section XII A to E ) from Quoted Amount in this BOQ.

surendra infrastructure pvt ltd

NARSINGH DEVELOPERS LLP