ADDITION/ALTERATION AND SPECIAL REPAIR TO BLDG NO P-200 AT CCDT KOCHI

Amount

Dismantling wall & ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets.

Supply, Providing and fixing suspended false ceiling consisiting of 12mm thick Gypsum seamless board suspended on Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including hangetextile membrane over NItroproof of 600PF coating with overlap sealed using synthetic rubber adhesive before providing screen concrete. Termination to be done on well extending the coating to min 300mm height above the finished floor level and sealed inside the groove of 20mm wide x 10mm thick flushed with polymer modified mortar as per vendor recommendation. Porous concrete surfaces to be primed with Nitoproof WB primer complete all as specified.

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4.0 sqm each but with shutters (without taking off shutters from the frames) complete all as specified.

Taking down chowkats or frames not exceeding 1.5 Sqm each but with shutters (without taking off shutters from the frames) all as specified.

Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions.

Supply and fixing 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete all as specified by the manufacturer complete all as specified and directed.

S&F extruded aluminium alloy handle 150 mm fabricated type anodised complete all as specified & directed.

S & F 100 mm size, Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21complete all as specified & directed.

S&F 200mm long aluminium anodized barrel tower bolt of extruded section complete all as specified.

S&F Mortice lock aluminum 4 levers, vertical type, size 75 mm complete all as specified and as directed.

S&F 200 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S&F powder coated anodised aluminium frame for doors, windows, ventilator with one or more rebates including joining cleat for fixing etc. complete (Sliding type/Side hung type)

S&F powder coated aluminium door , partitionining shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

S&F powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21, 100mm long (2 no.) suitable handle (1 no.) complete all as specified

S&F Anodised aluminium DECO grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and directed.

S&F in repair Stainless steel fancy chromium plated 25mm dia as in curtain rods incl of a set of Stainless steel chromium plated brackets suitable for 25mm dia curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc.s as all as specified and directed

S&F door closer, hydraulically regulated, designation No. 3, universal type suitable for door shutters of weight between 61 to 80 Kg with aluminium (die cast) body, fixed ll as specified and directed.

S&F 140mm Floor door stopper of aluminium and tongue alloy brass body and tongue with hard draw steel spring complete all as specified & directed..

S & F sheet glasses,plain 4.00mm thick glazing all with glazing clip & rubber gaskets etc exc 0.5 sqm in each pane complete all as specified and directed.

M&L for 9 mm thick prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination fixed with screws to frame work as specified and directed.

S&F in repairs vitreous China wash down water closet pan (pedestal pattern), coloured, with and including plastic water closet seat cover, coloured, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device, fixing bolts,10 ltrs PVC valveless , syphonic action type low level flushing cistern with inlet , ball valve, float & handle and flush pipe and connection to drain (or outgoing pipe) and to flushing pipe, anti -syphonage pipe, etc., complete all as specified and directed.

S&F in repair Wash hand basin, vitreous China coloured flat back of size 550mm x 400mm x 115mm to 150mm mm including Waste coupling , PVC waste pipe-32mm size, 15mm dia fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, PVC connection pipe 450mm long complete all as specified and directed.

S&F in repairs Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe,urinal spreader of any colour suitable for 15 mm bore fixed with urinal including CP pipe, Push tap any colour high pressure of PTMT screwed for iron pipe and fixed, (Minimum weight 15mm-47gms/ 20mm- 75gms) and fixed 15 mm bore including all fittings complete all as specified and as directed.

Demolition of cement concrete (unreinforced) above ground floors and paving exc. 15cm thickness (below or above ground level) complete all as specified and as directed.

M & L for plain cement concrete Nominal mix (1:5:10) type E2(using 40 mm graded brick aggregate) as in sunken floor complete all as specified and as directed.

M&L 50mm thick PCC (1:2:4) type B1 (Using 20mm graded stone aggregate) for sub base of sunken portion complete all as specified

M & L for RCC surface shall be made dry,clean, even and checked for soundness. Removal of oil,dirt,laitance and other contaminants by manually and surface shall be fairly smooth finish. Injection grouting of construction joints and honey combs if any with cementitious pressure grouting with 40 psi pump using cebex 100 or equivalent make in approved manufacturer's list @ 225 gms mixed to 50kg bag of cement including joints packing using polymer modified mortar. Providing and applying pitch free polyethene water proof coating using Fosroc Nitoproof 600PF or equivalent, by specialised agent/manufacturer authorised applicator over dry surface at 1.5mm thick in 2 coats with interval period of 6 hours over a substrate at coverage rate of 2Kg/Sqm using spray/squeege/ roller/ brush. Water proofing coating shall have the elongation of 200% (ASTM D412-90, Tear resistance of >7N (ASTM D 624-00), and tensile strength of 1.5N/mm2 (ASTM D412-90) and it should have a solid content of 80-85% incl Laying 200gsm non woven geo textile membrane over Nitoproof 600 PF coating with overlap sealed using synthetic rubber adhesive before providing screed concrete. Termination to be done on wall extending the coating to min.300mm height above the finished floor level and sealed inside the groove of 20mm wide x 10mm thick flushed with polymer modified mortar as per vendor recommendation. Porous concrete surfaces to be primed with Nitoproof WB primer complete all as specified and as directed.

S & F in repair Single Piece WC With UF Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern Fitting, Fixing Accessories And Accessories Set, Size: 370x670x720 mm, S Trap- 220 mm complete all as specified and directed Make - Jaguar Cat No-LYS-WHT-38851S220UFSMN or Equal to Parriware, Cera etc

S & F in repair Wall Hung Basin with Full Pedestal and Fixing Accessories,Size : 590x490x185 mm complete all as specified and directed Make - Jaguar Cat No-LYS-WHT-38801 with LYS-WHT-38301 or Equal to Parriware, CERA, etc

S&F in repairs CP Pillar cock, fancy type complete all as specified and directed Make - Jaguar Cat No- FUS-CHR-29001 or Equal to Parriware, CERA, etc

S & F SS soap dish holder complete all as specified and directed Make - Jaguar Cat No-AKP-35731P or Equal to Parriware, CERA, etc

S & F in repair 600mm long Towel Rack with 3 towel hanging hooks complete all as specified and directed Make - Jaguar Cat No-ACN-CHR-1181FHS or Equal to Parriware, kohlar, etc

S & F 600mm long glass shelf complete all as specified and directed Make - Jaguar Cat No-ACN-1171N or Equal to Parriware, CERA, etc

S&F in repair PVC (SWR) floor trap 75 mm plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches/floor or fixed to wall including necessary clamps inclusive of taking down of old pipes complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches/floor or fixed to wall including necessary clamps inclusive of taking down of old pipes complete all as specified and directed.

S&F PVC (SWR) bend any radius 110mm bore complete all as specified and directed.

S&F PVC (SWR) bend any radius 75mm bore complete all as specified and directed.

Dismantling wall/floor tiling incl. cement mortar bedding removing serviceable bles to store and rubbish off the premises complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 600x 300x7/450x 300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.16 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6 with water proofing compound complete all as specified

M & L for epoxy tile joint filling using Kerapoxy of MPAEI or equivalent on floor and walls. All complete as per the manufactures instructions

M&L for Vitrified double/ ultra charged stain free tiles polished, 10mm thick, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, with approved pattern and colour borders over cement screed 15 mm thick in CM 1:4 complete all as specified and directed.

All as per item No 45 above herein before but on vertical surfaces as skirting over 10mm thick rendering in cement mortar 1:3 complete

M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over cement screed 15 mm thick in CM 1:4 complete all as specified and directed.

All as per item 47 above herein before but on vertical surfaces as skirting over 10mm thick rendering in cement mortar 1:3 complete

M&L for prepolished Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over cement screed 15 mm thick in CM 1:4 complete all as specified and directed.

All as per item No 49 above herein before but on vertical surfaces as skirting over 10mm thick rendering in cement mortar 1:3 complete all as specified and directed.

M&L Pre Cast cement concrete block masonry Type C1 1:3:6(20mm aggregate) with solid blocks, exec 10cm in width and setting in CM 1:6 complete all as specified and directed.

Form work to soffits of suspended slab such as roof slabs, floor slabs, landing and similar work not exceeding 200mm thick (horizontal or sloping) rough finished complete all as specified and directed.

M&L reinforcement cement concrete type B-1,1:2:4 using (20mm graded stone aggregate) as in slabs etc complete all as specified and directed.

S/F CRS bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and directed.

M&L for 5mm thick plaster im CM1:3 on fair faces of brick work or concrete surfaces complete all as specified and directed.

M&L for cement plaster 8 mm thick in cement mortar 1:4 with approved water proofing compound over backing coat of 12 mm thick in cement mortar 1:6 for external faces of walls complete all as specified and directed.

M&L for cement plaster 10 mm thick in cement mortar 1:6 finished even and smooth without using extra cement for internal faces of walls complete all as specified and directed.

M&L for preparation new plastered external wall surfaces, apply one coat of alkali resistant exterior primer @0.9litre/10 Sqm to anti fungal paint over 1.0-1.5mm thick exterior grade wall care putty and application of two coats of weather proof paint (premium acrylic emulsion paint alkali & fungal resistance, dirt resistance exterior paint of required shade) over base coat on primed wall surface complete all as specified and as directed

Supply only Liquid Integral Water Proofing Compound complete all as specified and as directed.

M&L for Preparation of old plastered surfaces of walls including washing rubbing down and stopping of painted surfaces and application of one coats of weather proof paint (premium acrylic emulsion paint alkali & fungal resistance, dirt resistance exterior paint of required shade) including filling of nail holes/disturbed surface not exceeding 0.15Sqm by cementitious wall care putty complete all as specified and as directed

M & L for Complete removal of existing treatment and preparation old plaster surface of wall and applying 1 mm thick wall care putty on old plaster surfaces, preparatory to distempering & applying two coats of distemper oil emulsion white or tinted over a coat of alkali resistant primer of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour all as specified and directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified & directed.

S&F MS Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of grade Fe-410- W(Gde- E-250) quality- B and connected to frame with necessary fittings/screws/welding etc complete all as specified and directed.

M&L for preparation of new steel Surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of anti corrosive Epoxy paint over two coat of Epoxy primer on steel surfaces complete all as specified and directed.

S & F 12mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes inclusive of fixing to wall with necessary hinges, fittings and fixtures required. complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification complete all as specified and directed.

S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified and directed.

Surface excavation n.exc. 30 cm deep and averaging 15 deep and getting out in any type of soil complete all as specified and directed.

M&L for 100 mm thick Hardcore(broken stone or boulders) of gauge not exc. 63mm deposited, spread and levelled in layers not exc. 15cm thick watered and rammed to a true surface. complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:4:8 type B1 using 40 mm graded stone aggregate as in sub base complete all as specified and directed.

M&L for Coarse aggregate for granolithic floors graded from 12.5mm to 4.75mm under floors or in foundations spreading and levelling in layers n exc. 25 cm thick incl well ramming including watering as required complete all as specified and directed.

Providing & laying 60mm thick factory made chamfered edge cement concrete interlocking paver block any desired shape, colour, design, pattern and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment as in footpath, driveways & light traffic etc of required strength made by table vibratory method PU mould, laid in required pattern over not less than 12.5mm coarse aggregate bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size & pattern, finishing and sweeping extra sand complete all as specified and directed. (Note: Course granolithic aggregate shall be measured and paid separately)

Taking down cement plaster, any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off all as specified and directed

M & L for preparation new plaster surface of wall and applying 1.5 mm thick wall care putty on new wall surfaces, preparatory to distempering & applying two coats of distemper oil emulsion white or tinted over a coat of alkali resistant primer all as specified and directed

S & F in repairs 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified & directed

M&L for cement concrete 1:2:4 type B0, using 12.5mm graded stone aggregate as in kerbs or copings and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified.

S&F in replacement on wall/ concealed on wall high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessay fittings, solvents of size 20 mm dia including taking down old one complete all as specified and directed.

S&F in replacement on wall/ concealed on wall high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessay fittings, solvents of size 16 mm dia including taking down old one complete all as specified and directed.

S&F in replacement of bib tap Chromium plated (CP), half turn with flange and areator, fancy type long body cast copper alloy with crutch or butterfly handle screwed for GI/ CPVC pipe of size 15mm, complete all as specified and as directed by the Engineer-in-charge.

S&F in replacement of 15mm angle valve, half turn with flange, with flange type chromium plated for fixing with CPVC pipe, complete specified and as directed by the Engineer-in-charge.

S&F CP Flush Valve regular 32mm size (Concealed Body) with Exposed Shut off provision & round flange connection pipe for urinal posts to fixed in 15/20 mm pipe complete all as specified. Make-Jaguar, Cat Part No. FLV-1095NSQ or Cera/ Prayag or any other equivalent make in the approved manufactures list.

S&F PVC connection pipe 16mm dia (outer 450mm long cold water and taking down old one complete with brass union on both sides to suit 15mm GI pipe and taking down old one, complete all as specified and directed by the Engineer-in-charge.

S&F Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) and Shower arm 15 mm size, 195mm long with bend of 45 degree with flange of PTMT anycolour.(Minimum weight 40gms Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete in all respect as specified by Engineer-in-charge.

S&F in replacement Pillar Cock with Long Neck chromium plated fancy type screwed down high pressure and fly nuts screwed for iron pipe and fixed for 15mm bore pipe, and taking down old one, complete all as specified.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified by Engineer-in-CHarge.

Taking down carefully existig copper / alumn point wiring for light / fan / bell / socket 5/15 Amp points complete with fitting and fixtures such as switches, sockets, c/ rosess, holders and bracket fittings with battens / conduits / wires,T/L fittings and making good the disturbed surfaces of walls and roofs etc.and to match with existing colour complete all as specified and directed.

Taking down carefully old unserviceable sub main wiring including meters and making good disturbed surfaces and matching with existing complete all as directed and specified

Taking down carefully unserviceable main switches and distribution boards with fuses/ MCB's (single phase or three phase) of any capacity all as specified and directed.

S&F point wiring with 1.5 Sqmm PVC insulated sheathed FRLS multistranded single core copper conductor cable in PVC concealed conduit rigid non metalic (ISI marked) fixed concealed on wall/ roof except beam, column and RCC roof including chases cutting incl suitable size/ cap of sunken box for modular switch and socket and modular white cover plate, flush metal box etc inxl 1.5 Sqmm PVC insulated copper conductor as earth continuity wire for One light point controlled by one switch and making good disturbed surfaces of walls, floors etc complete all as specified and as directed.

S/F one 3 pin 5 Amp socket outlet point controlled by one switch on Independent board complete all as specified and directed.

S/F one 3 pin 5 Amp socket outlet point controlled by one switch on same board complete all as specified and directed.

All as per item No. 86 here-in-before but one 15 Amps socket outlet point controlled by one single pole switch one way and wiring with 2.5 Sqmm PVC insulated, stranded, sheated copper conductor on independednt board with continuous earth wire of size 2.5 Sqmm green colours PVC insulated, unsheathed, stranded copper conductor cable complete all as specified and directed.

All as per item No. 89 here-in-before but one 15 Amps socket outlet point controlled by one single pole switch one way and wiring with 4.0 Sqmm PVC insulated, stranded, sheated copper conductor on independednt board with continuous earth wire of size 4.0 Sqmm green colours PVC insulated, unsheathed, stranded copper conductor cable complete all as specified and directed.

M&L Switch modular type 6 amps, 1 module single pole one way duly ISI marked, complete all as specified and directed.

S&F Socket outlet modular type 6A, 2 in 1,without shutter, 2 module, duly ISI marked, complete all as specified and directed.

M&L Switch modular type 16 amps, 1 module single pole one way duly ISI marked, complete all as specified and directed.

S&F Socket outlet modular type 16A, 3 pin combined, 2 module, duly ISI marked, complete all as specified and directed.

M&L Bell push modular type 6 amps, 1 module single pole duly ISI marked, complete all as specified and directed.

S&F rotary Stepped type electronic fan regulator for ceiling fan 1200/1400mm size, 240 volts, 6 Amps, 2 module, 120W, white in colour, duly ISI marked complete all as specified and directed.

S&F Ceiling rose surface type, 240 volts, 50 Hz, 6A, Pilot 3 plate, white in colour, bakelite 65 x 50mm, 3 terminals duly ISI marked complete all as specified and directed.

S&F Door Bell Ding Dong single phase 240 volts, white in colour, duly ISI marked complete all as specified and directed.

Supply and fixing LED light fitting 1 x 20 Watt, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED light fitting mirror type with high output diffuser 2 feet 10 Watt, 220V, AC decorative type with driver, holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED luminaire 600mm x 600mm, 36W, 240 Volts, single phase recessed type with high efficiency PMMA diffuser soft glare light complete with driver suitable for roof ceiling including connecting up with driver three core flexible copper conductor of size 23/00.0076 all as specified and directed.

S&F LED high bay light fitting outdoor type 100 Watt 230 Volts with high pressure die cast aluminum hosing and heat resistant complete with driver and corrosion resistant including thermal management in multiple lens/ optics complete all as specified and directed. . Make- Luker, Cat Pat No- LOHY100 or Bajaj/ Crompton or any other equivalent make in the approved manufactures list.

S&F in replacement of ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor including provision of PVC flexible copper cable of size 23/00.0076 three core from ceiling rose to exhaust fan max 1.5 mtr for giving connection complete all as specified. Note : Old Ceiling fans to be deposite at AGE E/M (NW) store yard.

S&F in replacement of exhaust fan made of PVC complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, single phase, Copper winding of sweep 300MM including provision of PVC flexible copper cable of size 23/00.0076 three core from ceiling rose to exhaust fan max 1.5 mtr for giving connection complete all as specified. Note : Old Exhaust fans to be deposite at AGE E/M (NW) store yard.

S&F Factory made single phase and neutral Sheet Steel made out of CRCA 1.2 mm thick, powder coated double door distribution board 8 way, dust and vermin proof, fitted with two cover, one screwed cover for incoming and outgoing MCBs and the second for protection of MCBs fitted with colour bus bar of capacity 200 Amps, neutral link, earth bar and din rail. suitable for use on 240V, 50Hz supply, partly immersed in wall and making good distrubbed surfaces with matching colour, complete all as specified.

S&F MCB TP, 63Amps, 415 volts, "B" series, 10KA duly ISI marked, in existing MCB DB, complete with connection testing and commissioning all as specified.

S&F MCB SPN, 40A - 63Amps, 240 volts, "C" series, 10KA duly ISI marked, in MCB DB, complete with connection testing and commissioning all as specified.

S&F MCB SP, 6A-32 Amps, 240 volts, "B" series, 10KA duly ISI marked, in the MCB DB, complete with connection testing and commissioning all as specified.

M&L for Sub main wiring with two single core 6 sqmm FRLS insulated and sheathed stranded copper conductor alongwith earth wire 6.0 sqmm drawn in FRLS rigid conduit connected to main board complete all as specified and directed Note:- Two runs cable and one number earth wire and suitable FRLS conduit shall measured together as unit length.

Supply, installation, testing and commissioning of split air conditioning unit 2.0TR capacity Inverter type, Inbuilt Air Purifier, complete with cordless remote control, minimum 5 star labelled, latest energy efficient model eco friendly refrigerant gas, 6000 Kcal / Hr, 50 Hz, 240 volts, air cooled copper condenser with all accessories varied speed including fixing the out door unit with suitable stand as site requirement and fixing of room (high wall) unit on wallwith necessary wall cutting/ making holes to pass the refrigerant pipes, drain pipes, cables etc and making good to match with existing finishing complete, providing and making interconnection, including suction and discharge copper pipes with refrigerant including with nitrile rubber insulation and control cable from indoor to outdoor as required at site, Power cabling from Isolator/ Enclosure to unit, first charging of refrigerant gas, drain piping of suitable size including connection drain lines from unit to nearest drain points complete all as specified.

Supply and fix 5KVA capacity Voltage stabilizer, copper wounded suitable for 2.0TR inverter type split AC, automatic operation, single phase naturally air cooled indoor type & designed for input variation between 130 V to 300 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and speed of correction 8 volts per second, fixed on wall with necessary arrangements complete all as specified.

Supply and fixing copper refrigerant piping of both sizes for suction line 1/4" and 1/2" for discharge including thermal insulation class "o" nitrile rubber insulation density 45- 55 kg/m³, for suction/ discharge line, beyond standard length provided with original units by the manufacturer complete all as specified.

M&L for sub main wiring with 2 runs of 4 Sqmm PVC insulated multi stranded copper cunductor cable including PVC conduit with 4 Sqmm cable as earth wire complete all as specified.

S&F single pole enclosure with a 2 pin and earth plug and socket complete with one single pole MCB 20 Amp 240 Volt complete all as specified.

S&F MCB SP 6 to 32 Amp C curve, 240 Volt, 10 KA complete all as specified.

S & F 20 mm dia CPVC pipes, SDR-13.5 & plain CPVC SDR 11 fittings, fixed on wall/ceiling with all necessay fittings, solvents complete all as specified.

MS BUILDERS (BID ID -3200869)

EXCEL ENGINEERING (BID ID -3203903)

M/s ANTONY THOMAS AND CO (BID ID -3208977)

Anaswara Constructions (BID ID -3209302)

K THOMAS AND COMPANY (BID ID -3209129)