Providing and Fixing Interlocking Tiles in Campus ESS at Sector-24, YEIDA wc-04

Earth work in rough excavation, banking excavaated earth in layers not exceeding 20 cm in depth, breaking clods watering, rolling each layer with 1 / 2 tonnes roller or wooden or steel rammer and rolling every 3rd and top most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, all leads as per ( MOST / A.R. / yeida ) For all kind of soil.

Cement concrete with 4cm gauge approved stone ballast, coarse sand & cement in the proportion of 8:4:1 including supply of all material, Labour, Tools&plants etc required for proper completion of the work.

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering,shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum.Excess/less cement used as per design mix is payable/recoverable All works upto plinth level. (DAR/5.33.1/Based on UPPWD/SOR-2020).

Foundations, footings, bases of columns, etc. for mass concrete. (DAR/5.9.1/Based on UPPWD/SOR-2020))

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all Complete upto plinth level & above plinth level.(DAR 2018-5.22)Based on UPPWD SOR/2020Thermo Mechanically Treated bars of grade Fe-500D. (DAR 2018-5.22.6)Based on UPPWD SOR/2020

Dry brick on edge flooring in required pattern with bricks of class designation 150 on a bed of 12 mm local sand including filling joints with local sand (with F.P.S. bricks) complete.

Providing wallputty on new surface with approved quality material of berger/j.k. /Birla or similar make 2 coat

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm). (DAR/13.46.1/Based on UPPWD/SOR-2020))

Providing and laying 80 mm thick factory made cement concrete interlocking paver block(ISI Marked) made by block making machine with strong vibratory compaction of approved size design, shape, laid in required color and pattern over and including average 50 mm thick compacted bed coarse sand and filling the joints with fine sand all complete as per direction of Engineer -in - charge with conforming (UP PWD SOR 2020) (New SOR Based DAR 16.68)