Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹1.7 L
EMD Value
₹4,231
Closing Date
24 Oct 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
GREESHMA G R
Office of Assistant Engineer LID EW Section Karulai GP
ANNUAL PLAN 2025 26 KARULAI GP WARD 1 Maruthangad Anganavadi well renovation and other works KARULAI GP PRO NO 136 26
2026_LSGD_879659_7
03/2027/AE/LID EW/KLI
Open Tender
Civil Works - Others
Percentage
KARULAI GP
Please refer Tender documents.
7 documents required · 7 mandatory
₹555
Yes
₹4,231
Yes
15 Oct 2026
15 Oct 2026
26 Oct 2026
15 Oct 2026
24 Oct 2026
15 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1WELL RENOVATION | |||||
| 1.001 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 18.04 | sqm | 339.63 | ₹6,126.93 |
| 1.002 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 60 | kg | 171.81 | ₹10,308.6 |
| 1.003 | OD384640/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 5.75 | sqm | 609.6 | ₹3,505.2 |
| 1.004 | 11.37:Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete | 15.92 | sqm | 1,077.69 | ₹17,160.06 |
| 1.005 | 50.2.3.1:Pumping or Bailing out water and removing slush etc by using pump set including cost of labour, oil hire charges of pumpset, etc complete | 18 | hour | 317.38 | ₹5,712.84 |
| 1.006 | 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) | 1.2 | cum | 7,286.51 | ₹8,765.67 |
| 1.007 | 17.28.1.1:Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC.
waste fittings complete.
Semi rigid pipe32 mm dia | 50 | each | 104.78 | ₹5,239 |
| 1.008 | 50.18.7.1.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 15mm dia 12kgf/cm2 -Internal work- Exposed on wall | 47 | metre | 247.36 | ₹11,625.92 |
| 1.009 | 18.54.4:Providing and fixing PTMT bib cock of approved quality and colour.15 mm nominal bore, 90 mm long, weighing not less than 93 gms | 4 | each | 195.85 | ₹783.4 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.11 MB
Tendernotice_2.pdf
PDF • 0.11 MB
Tendernotice_3.pdf
PDF • 0.16 MB
FOT.pdf
Tender Documents • 0.11 MB
BOQ_1495698.xls
BOQ • 0.33 MB
PREAGREE.pdf
Tender Documents • 0.12 MB
Affidavit.pdf
Tender Documents • 0.09 MB
SBD.pdf
Tender Documents • 1.89 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .