REPAIRS TO VACANT QUARTERS AT SAILORS AREA, DOLPHIN HILL UNDER AGE B/R-III UNDER GE (NB) VISAKHAPATNAM

Amount

Taking up or down 15mm bore, Steel tubing and connections and keeping serviceable pipes in safe custody for reuse in the work after and including cleaning as directed.

Taking up or down 20mm bore, Steel tubing and connections and keeping serviceable pipes in safe custody for reuse in the work after and including cleaning as directed.

Taking up or down 25 or 32 mm bore, Steel tubing and connections and keeping serviceable pipes in safe custody for reuse in the work after and including cleaning as directed.

Refixing of 15mm bore old serviceable steel tubing and connections in new or old position with new fittings complete to walls and ceilings or laid in floors, etc complete as directed. (Note: Serviceable pipe shall be reused as obtained from serial item No. 01 above)

Refixing of 20 mm bore old serviceable steel tubing and connections in new or old position with new fittings complete to walls and ceilings or laid in floors, etc complete as directed. (Note: Serviceable pipe shall be reused as obtained from serial item No. 02 above)

Supply, laying, connection and testing, 15 mm bore, Steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, etc complete all as specified and directed.

Supply, laying, connection and testing, 20 mm bore, Steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, etc complete all as specified and directed.

Supply, laying, connection and testing, 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed

Supply, laying, connection and testing, 25 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed

Supply, laying, connection and testing, 32 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed

S & F in repairs, vitreous China wash basin, size 550 x 400mm, white, flat back including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed.

S & F in repairs, vitreous China wash down water closet pan (pedestal pattern), white, including connection to outgoing drain and flushing pipe, anti syphonic pipe,P or S trap with seat and cover complete but excluding flushing cistern & flush pipe including making good damaged/disturbed surfaces complete all as specified and directed.

S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S & F in repair stainless steel Grating, 110mm dia fixed with white cement complete all as specified and as directed.

S & F in repair stainless steel Grating, 75mm dia fixed with white cement complete all as specified and as directed.

S & F in repairs, CP, wall mixer for mixing hot & cold water with provision for overhead shower with 115mm long bend pipe on upper Side, connecting legs & wall flanges complete all as specified and directed.

S & F in repairs, 15mm bore, PVC connection pipe 600mm long with PTMT nuts at both ends complete all as specified and directed.

S & F in repairs PVC waste pipes of 32mm dia and 900mm long for wash basin/kitchen sink complete all as specified and directed.

S & F in repairs, plastic water closet, Seat and Cover for pedestal pan, white / black, closed pattern with flat bottom and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S & F in repairs, 10 litre capacity, PVC valve less syphonic action type, flushing cistern, low level, white, with inlet, ball valve, flush pipe, float and handle including brackets complete all as specified and directed.

S & F in repairs PVC syphonic kit (any type/any pattern) suitable for 10 litre capacity low level flushing cistern and making the cistern functional in all respectcomplete all as specified and directed.

S & F in repairs 32 mm bore CP waste coupling full thread / Half thread sutable for steel sink or wash hand basin complete all as specified and as directed.

S & F in repairs 40 mm bore CP waste coupling full thread / Half thread sutable for steel sink or wash hand basin complete all as specified and as directed.

S & F in repairs, Stainless steel, kitchen plate rack of size 786X914X254 mm as per existing design and specification as approved complete all as specified and directed. Make: Prayag Cat No. P-348 or equivelant of make as per list of manufacturer's

S & F in repairs, stainless steel sinks made of 1 mm thick sheet with plugs, washers and wastes including bedding in ement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F 100 litres capacity rotational moulded polyethylene water storage tanks, double layer construction, ISI marked (Cylindrical vertical with closed top), hoisted and fixed in position including taking down old unserviceable one as specified in SSR Part I and directed.

S & F 500 litres capacity rotational moulded polyethylene water storage tanks, double layer construction, ISI marked (Cylindrical vertical with closed top), hoisted and fixed in position including taking down old unserviceable one as specified in SSR Part I and directed.

S&F in repairs 25 mm dia PTMT ball Valves, high pressure, with polythene float and fly nut complete, screwed for Iron pipe or brass ferrule complete all as specified and directed.

S & F in repairs fancy type long body chromium plated bib taps, cast copper alloy with capstan head, screwed down, screwed for 15 mm dia bore iron pipe complete all as specified and as directed.

S & F in repairs stop valves, cast copper alloy, chromium plated ,with long shank and cup (concealed type) fancy type screwed down, high pressure, with crown head, screwed both ends for 15 mm bore iron pipe or for unions, complete all as specified and as directed.

S & F in repairs, 15 mm bore, Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F in repairs, 15 mm bore, pillar taps, fancy type, cast copper alloy, chromium plated with capstan heads, screwed down high pressure with or without lettered 'Hot or Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S & F in repair 15 mm bore, angular stop valve, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repair 125 mm size, shower rose, brass chromium plated, swival type including SS shower arm with flange complete all as specified and directed.

S & F in repairs Soap dish of standard size, stainless steel, fixed in walls with plugs & chromium plated brass screws complete all as specified and directed.

Taking down vitreous China wash basin or sink of any size with backets and refixing in the same position after replacement of brackets as per the existing specification complete all as specified and directed.

S & F in repairs 20 mm bore, aluminium anodised, tubular towel rail, D type, 60 cm long between flanges with brackets complete all as specified and directed.

Taking down chowkats or frame, n.exc 1.5 Sqm each with shutters (without taking off shutter from the frame) complete all as specified and directed.

Taking down chowkats or frames, exc 1.5 but n.exc. 4 Sqm in each with shutter (without taking off shutter from the frame) complete all as specified and directed.

Taking down shutter of any description exc 1 Sqm but n. exc 2 Sqm each including refixing in same opening complete all as specified and directed.

S & F solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete as per specification and drawing and as directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window / Ceosetory windows & other Frames/Chowkhat of size 65x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum comp?ressive strength of 58N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs /SS dash fasteners shall be paid for separetly complete all as specified and directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window / Ceosetory windows & other Frames/Chowkhat of size 65x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum comp?ressive strength of 58N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs /SS dash fasteners shall be paid for separetly complete all as specified and directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30 mm thick comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum comp?ressive strength of 58N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs /SS dash fasteners shall be paid for separetly complete all as specified and directed.

S & F factory made 35 mm thick second class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc [without sash bars] edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, size of members of shutters shall be as specified in SSR Part-I, Section 8, Clause 8.24 (a) supplied and fitted to chowkat complete all as specified and as directed.

S & F Aluminium powder coated windows frame with shutters sliding pattern consisting of three tracked frame and 03 shutters (2 shutters glazed shutter and 1 gauged shutter) using standard medium weight section of weight not less than 0.55 Kg/RM including glazing with and including 5 mm thick sheet glass and stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with suitable EPDM rubber beading including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, powder coated aluminum snap beading screws,handle ,locking arrangements etc complete all as specified and directed.

S & F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.

S & F 125 mm long, stainless steel butt hinges fixed with stainless steel hinge pin etc complete all as specified and directed.

S & F 100 mm long, stainless steel barrel tower bolts (ISI marked) of extruded section fixed with screw complete all as specified and directed.

S & F in repair 150 mm long, stainless steel barrel tower bolts (ISI marked) of extruded section fixed with screw complete all as specified and directed.

S & F in repair 150 mm long, stainless steel handle (ISI marked) complete all as specified and directed.

S & F in repair Aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clipes of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy, length of bolt of 300 mm complete all as specified and directed.

M & L for Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and directed.

S & F in repair stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed.

M & L for plain cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) for embedding holdfast, bed block, cills, etc including necessary form work complete all as specified and directed.

S & F mild steel bands, straps, supports or stays of rain water, ventilating pipes including bolts, hooks (stay) for large gates, hook and pintel hinges, clamps, hold fasts, wall ties, flat iron fillets for securing wire mesh, wind tie, fan hook and similar work including necessary drilling bolting or riveting etc conforming to Fe – 290 Gde E – 165 complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with nails etc complete all as specified and directed.

S&F factory made, ready to install , non toxic lead and cadmium free , single extruded, 3 side prelam, solid (non hollow) WPC door frame (single rebated) of size 75 x 50 mm and having water proof, termite proof, fire retardent and with excellent screw holding capacity, mitred cuts at two corner and joined with MS screws on each side and fixed to the existing wall using (10 x 100mm) long MS screws to through the frame by using PVC fasteners, minimum 4 Nos of MS screws to be provided for each vertical post and minimum two Nos. MS screws to be provided on horizontal member complete all as specified and directed.

S&F 18 mm thick factory made, ready to install , non toxic lead and cadmium free , single extruded, water proof, termite proof, fire retardent and with excellent screw holding capacity, solid WPC board, one side decorative choice lamination and other side balancing white as in cup board shutter fixed to door frame with and including crack '0' hinges of suitable size and stainless steel screw including lipping the cut edges with same materials finish complete all as specified and directed.

S&F 18 mm thick factory made, ready to install , non toxic lead and cadmium free , single extruded, water proof, termite proof, fire retardent and with excellent screw holding capacity, solid WPC board, one side decorative choice lamination and other side balancing white as in cup board shelves fixed in and including WPC guide rail and stainless steel screw including lipping the cut edges with same materials finish complete all as specified and directed.

S & F in repair 100 mm size hasp & staple (ISI marked), bolt type, stainless steel with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S & F in repair floor door stopper of aluminium alloy body and tongue, anodised, 150 mm overall length of cover plate with hard drawn steel spring, fixed in floor complete all as specified and directed.

S & F in repair 25 mm dia, PVC coated MS curtain rod with brass brackets of superior quality complete all as specified and directed.

S & F in repairs 75 mm, 4 lever, Brass, Mortice Lock, vertical type with three keys complete all as specified and directed.

Taking down aluminium doors / Window shutters / ventilators of any size carrying out minor repairs / adjacement including replacement of rubber beading, aluminium beads, cleats of as required size and refixing in same position complete all as specified and directed.

S & F in repairs Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, 30mm width of flape when open complete all as specified and directed.

S & F In repairs, aluminium bottom strips for entrance doors, Minimum 0.5mm thick, 20 to 25mm wide to arrest entry of insects including fabric dust remover fixed at the bottom of the strip complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and disposal of debris and rubbish to outside MD land complete all as specified and directed.

M & L for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, in floors etc, including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, in floors etc, including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for Glazed, ceramic, coloured tiles of size 300mm x 200mm x 6-7mm thick, on vertical surfaces such as skirting, dados etc, including 10 mm thick bedding in cement mortor 1:4 and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar and removing rubbish upto a distance outside MD land complete all as directed by the Engr-in-Charge.

M & L for 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 15 mm thick screed bed in cement mortor 1:6 & cutting, polishing complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water and removing rubbish to outside MD land complete all as specified and directed

M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished the surfaces even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 15 mm thick in two coats (10mm+5mm each) on other than fair faces of brick work or concrete surfaces in cement mortar 1:4, mixed with integral water proofing compound with weight of cement in top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item).

Supply only integral water proofing compound (ISI marked) complete all as specified and directed.

S & F in repairs, 300 mm long, mild steel, ordinary rat tail rod pattern springs incuding roller and roller plate complete all as specifed and directed.

M&L for providing PMM (Polymer modified cementitious mortar) :- (i) Dry sub strate surface and free of debris & dust (ii) Applying Epoxy bond coat on the sound substrate using approved spray machine & ensuring that no pin holes are visible.(In case pin holes are still visible after a coat, a second coat shall be applied to ensure absence of pin holes). (iii) Immediately after application of epoxy bond coat as above apply PMM (Polymer modified cementitious mortar) of 25 mm thickness. Note : Application of PMM shall be preferably be in coats of appx 10mm thickness. PMM work shall be executed in fairely rapid successions so as entire work is completed with in 30 mins). PMM shall be pre packed ready to use. (iv) PMM surface to be moist cured for three days followed by air curing in temperature as recommended by manufactuer complete all as specified and directed.

M&L for preparation of new platered surface of wall and applying two coats of weather proof 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre, dart pick up resistant,silicon enhanced,UV resistant and PU enhanced property over a coat of alkali resistant primer including applying two coats of wall care putty exterior grade to a smooth surface including making good any undulations on the surfaces including all necessary scaffolding,complete all as specified and directed. Note :- Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS

Cutting of saplings of any size from buildings in any situation & at any height including removal of roots from roof/wall including applying root killer chemical as per manufacturers instructions and making good disturbed portion with PCC 1:2:4 Type Bo (using 12.5 mm graded stone aggregate) complete all as specified and as directed.

M & L for post construction Antitermite treatment by treating At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed.

Removing kitchen drainage block from the waste pipes by removing grating and removing waste materials from traps, bends etc carefully and roding with flexible GI wire to clear blocking including disposing the waste materials complete all as specified and directed.

Removing blockages from soil pipes or from WCs by carefully roding with split bamboos or flexible GI wire etc including cleaning the toilets by flushing water and disposingany removed soil materials complete all as specified and directed.

Cleaning of blockage in the internal water supply lines, concealed or fixed on the wall or floor surfacesby taking down existing fittings like taps / valves etc to facilitate clearence of blockage and refixing the fittings in original position after clearence of blockage complete all as specified and directed.

M & L for Filling of cement mortar in sides of nahani trap, gully trap, rain water pipes out let etc. in CM 1:3 including WPC @ 2% by weight of cement or as per manufacturers instructions and making good finishes to arrest leakage / seepage complete all as specified and as directed.

M & L for grouting of tiled floor with cement slurry or cement mortar 1:3 with and including mixing of pigments as reqirred or water proofing compound complete all as specified and directed.

Demolition of unreinforced Cement Concrete of any description and in floor and roofs (other than ground floor), and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 M complete all as specified and directed.

M & L for providing and filling light weight AAC bats (of size 40-60mm) with cement mortar mixed in the ratio 1:3:6 (1cement : 3 coarse sand : 6 block bats) including mixing of approved water proofing compound in recommended proportion, the laid AAC bats mix shall be well rammed and compacted as required; care shall be taken prior to filling all pipes passing through sunk portion such as the pipes are pressure tested by maintaining pressure for 24 Hours and junctions of pipes passing through walls, slabs are well grouted and sealed; this shall be tested by ponding water for required depth and maintaining for 75 Hours complete all as required and as directed. (Note: (I) Unit quoted rate shall deemed to include cost of AAC bats, cement mortar, top screed, labour charges for working at all levels, leads and heights, (ii) For payment the area of sunken slab and depth of filling including the thickness of screed shall be measured)

M & L for filling polymer modified non shrinking slurry for sunken floors of toilets by drilling holes to a depth of 60mm by 20mm dia at 1 mtr interval and applying 2mm thick Acrylic polymer modified elastomeric waterproofing membrane coating over the concrete syrfaces by mixing Acrylic emulsion cement modifier and water based concrete bonding agent and water including testing the same for 48 hours as per the manufacturer's technical specification complete all as specified and as directed Make: (a) Polymer modified non shrinking slurry = CEBEX 100 of M/S Fosroc or equivalent product of M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. or M/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. (b) Acrylic polymer modified elastomeric waterproofing membrane = Brushbond of M/S Fosroc or equivalent product of M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. or M/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. (C) Acrylic emulsion cement modifier and water based concrete bonding agent = NITO BOND BB with Brush bond powder of M/S Fosroc or equivalent product of M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. or M/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd.

M&L for PCC 1:4:8 , type D-2, using 40mm graded crushed stone aggregate as in foundation , filling and mass concrete commplete all as specified and directed..

M & L for 25 mm thick, plain cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in sub-base of flooring, etc and finished the surface even and rough complete all as specified and directed.

M & L for preparing old decorated plastered surfaces of ceiling, etc and applying one coats of white wash complete all as specified and directed.

M&L for preparation of new platered surface of wall and applying two coats of oil bound distemper over a coat of primer including applying one or more coat of wall care putty to a smooth surface including making good any undulations on the surfaces complete all as specified and as directed. Note :- Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS

M&L for preparation of old decorated, damp affected wall surface by complete removal of existing treatment, washing, rubbing, stopping etc and apply the following treatments :- (a) Apply injection sealer by providing holes of 6mm dia and 50 mm deep at an angle of 45 degree. (b) Apply a coat of advance dammp proof protective wall sealer (c) Apply one or more coat of water proof putty to a smooth surface including making good any undulations on the surfaces (d) Apply a coat of acylic primer over the putty surface (e) Two coats of oil bound washable distemper complete all as specified and as directed. Make : Berger,Asian Paint, J&N ,Shalimar Note :- (i) Painting work shall be carried out according to Smart Painting procedure mentioned in PS (ii) Sanding of surfaces shall be done by mechanical sander with 1500-2700 rpm with internal dust extraction system for a clean environment certified by the Paint manufacturer)

Material and labour for applying one coat of oil bound washable distemper to old decorated plastered (distempered) surfaces of wall,cornices,pilasters including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed by Engineer -in-Charge. Note :- Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS

M & L for Preparation of old painted wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking down eaves gutters and rainwater/soil/waste pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed

S & F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S & F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S & F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S & F 110mm dia PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

S & F 75mm dia PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

S & F 110mm dia PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed..

S & F 75mm dia PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S & F 110/75 mm dia PVC (SWR) reducers complete all as specified and directed.

S & F 110mm dia PVC (SWR) vent cowl complete all as specified and directed.

S & F 75mm dia PVC (SWR) vent cowl complete all as specified and directed.

M & L for repairing CI/PVC pipe of 75/100/110/150mm dia pipe from out side(shaft portion) of building leaking from joints in between floor trap and CI/PVC pipe bends or from any other joints in pipe, duly filed up joints of pipe with CM 1:1 or solvent cement with chemical grouting compound and making good to disturbed surfaces (as required) as per the existing one complete all as specified and as directed.

S&F in repair PVC (SWR) floor trap 75mm size plain with grating including jointing with solvent cement complete all as specified and directed

ANUJ INFRA (BID ID -3330634)

YVR CONSTRUCTIONS (BID ID -3331141)

SRI RAJA RAJESWARI ENTERPRISES (BID ID -3330835)

SRI VIJAYA LAKSHMI ENTERPRISES (BID ID -3331678)

M B CONSTRUCTIONS (BID ID -3330944)

bhavani constructions (BID ID -3331835)

BHASKARA RAO CONSTRUCTIONS (BID ID -3331915)