Annual Plan-Peruvemba GP 185/2026-27 - Panchayath Office Room Maintenance.

OD144262/2026-2027:Labour,Equpment hire and supervision charges for chipping and removing loose concrete layer form beams and columns,in orded to expose the existing reinforcment and cleaning the surface dust free,all complete as per the instructions of Engineers in charge

OD155637/2026-2027:Engaging labours for site clearance and cleaning by removing waste material etc complete

OD144265/2026-2027:Supply and application of anti corrosive zinc rich primer over the exposed steel reinforcement as per the manufactures specification and as directed by engineer in charge

OD144270/2026-2027:Supply and application of tack coat of Epoxy bonding agent Rearm Bond Ep on Existing concrete surface, after cleaning the surface dust free, all complete as per instruction of Enginner in charge

OD144276/2026-2027:Providing & Pouring free flow micro concrete ReArm crete MC mfd by M/s MYK Arment,After mixing the same with water and 6mm down aggregate @ 10% by weght of micro concrete. water base curing compound shall be applied immediatly after shutter removal,all complete as per the instrctions of Engineers in charge

14.1.1:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)

13.16.1:6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)

10.15.2:Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular /L-Type sections, made of 1.60 mm thick M.S. Sheet,joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.Fixing with carbon steel galvanised dash fastener of required dia and size ( to be paid for separately)

9.147D.1:Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Two track two panels sliding window made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 +/- 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm)