Thewa Maldevta Bajhet MVS Water Supply Scheme of Block Raipur District Dehradun

Amount

CIVIL WORK- Providing, Supply and Carting, laying jointing (including cost of jointing materials like white lead, hemp and oil etc.) fixing and testing of M.S. galvanised screwed and socketed pipes speicals and fittings, including cutting and refilling etc.

65 mm dia. G.I. (M)

65 mm dia. G.I. (H)

Providing ,Laying and carting S&S Centrifugally Cast (Spun)/Ductile Iron Pipes Conforming of IS:8329

DI K-9 , 100 mm dia

Excavation of earth for pipe line in trenches with lift up to 1.50 M. & lead up to 30 M. including refilling, watering, ramming, of excavated earth into the trenches and removal of surplus and removal of surplus earth up to a distance of 60 M. form trenches including supply of labour, T&P etc. all complete (Assuming that 90% pipe line is laid in trenches. It is estimated that 75% excavation will be in soil mixed with shingle bajri & boulders and 25% will be in medium rocks.For New Pipe Line

Soil mixed with boulders & bajri

Medium rocks

Supply of all meterials, labour, T&P and construct R.C.C. C.W.R. as per drawing including cost of all pipes and fittings all complete

45.00 KL cap.

Supply , Carting and fixing of the following fittings including cartage of materials, labour, T&P etc. complete :-

GATE/WHEEL VALVE(CLASS-I) as per IS: 788

65 mm dia.

AIR VALVE

20 mm dia

C.I., D/F sluice valve Class I as per ISS 780-1969 working pressure 10 Kg/cm2

100 mm dia.

Supply of all materials, labour, T&P etc. and construct wheel /Air valve chambers as per type design (0.60x0.60x0.75m)

Supply of all materials, labour, T&P etc. and construct B.P.T. as per type design (0.60x0.60x0.75m)

Random Rubble Stone Masonry laid in 1:6 cement and sand mortar, in breast walls, retaining walls, parapets, scuppers, etc. including supply of all material, labour, T&P and royaltiies etc.

Random Rubble Stone Masonry laid Dry, in breast walls, retaining walls, etc. including supply of all material, labour, T&P

Supply of all materials, labour & T&P etc. and construct the following works as per type design and drawings complete :-

B.F.G. 4.0 M.wide with Inlet chamber

B.F.G.Per Running Meter

Supply of all materials, labour, T&P etc. and construct S.C.C. cum roughening filter of (1 MX 1 M) size as per type design

Supply of FRP coated MS Bucket type Chlorinator of 25 liters capacity with chlorination arranements.

Pump House , Boundry Wall & Iron Gate- Excavation of earth in foundation soil mixed with single, bajri etc. including lift up to 1.5 m and lead up to 50 m filling watering and ramming of excavated earth in to the trenches or in to the space between the building and the sides of foundation trench

PCC in 1:4:8 in foundation with cement, local sand and 40 mm gauge stone ballast including supply of material, labour, T&P etc. for proper completion of work.

First class brick work in 1:6 cement and local sand including supply of all material, labour, T&P etc. complete.(IN FOUNDATION & PLINTH)

First class brick work in 1:6 cement and coarse sand including supply of all material, labour, T&P etc. in super structure.

Earth filling in Plinth

12 mm thick PC plaster in 1:6 cement and local sand mortar including supply of all labour material, T&P etc. all complete

RCC 1:1.5:3 with cement, coarse sand and 20 mm gauge stone ballast in lintals, beams, sunshades door and window sills, bed plates including supply of reinforcement and its bending but including its fixing and binding the same with 5 mm thick binding wire

Same as above but for slab

Mild steel or iron work in plain work such as RCC work brought to required shape including supply of steel & its bending.

Mild steel or iron work in heavy section & sizes as door frames, windows, grills, gratings etc. wrought to required shape including supply of steel sections, hinges nuts & their fixing required for proper completion of work.

40 mm thick PCC 1:2:4 with cement coarse sand and 20 mm gauge stone ballast in flooring, laid in panels finished with 3 mm floating coat of neat cement.

75 mm thick base concrete consisting of 1:4:8 cement, local sand & 40 mm stone ballast.

Steel work welded in built up section/framed work including cutting, hoisting, fixing (40mm x 40 mm x 5 mm angle iron MS Chaukhats in doors and windows)

Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

S/F of 4mm thick glazing in window shutter including supply of all required.

Painting or warnishing new iron work or wood work with one coat of primer & two coats of approved quality synthetic enamel paint or varnish including. Supply of all material, labour T&P etc. required for proper completion of work.

Finishing walls with textured exterior paint of required shade on new work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/ 10 sqm

Distempering with oil bound washable distemper of approved brand and New work (two or more coats) over and including water tinnable priming coat with cement primer

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. ( Iron gate )

Stone tile work for wall lining upto 10 m height with special adhesive over 12mm. 8mm thick (mirror polished and machine cut edge). Granite stone of any colour and shade.

Supply & fixing of white ciremic Tile in inner side of wall upto door lable of Pump house

Supply & laying of Kota stone tile in floor

Supply and fixing of RS joist of ISMB 223 mm x 112 mm grouted in cement concrete including one coat of primer but excluding of concrete as per direction of engineer in charge.

Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete

Supply and fixing barbed wire fencing above boundry wall including supply of all labour , material & t&p etc all complete

E &M Work- Drilling of Mini Tubewell Transportation of Rig machine, camp equipage, connected T&P and necessary material, tubewell assembly pipe etc. required for drilling upto site of work including loading, unloading, erection and levelling of Rig machine in all respect.

Drilling of 200 mm dia bore by rig machine in alluvial boulders, Pebbles, rocky stone, sticky clay etc by ODEX system including lowering, welding of casing pipe (plain/perforated ) from ground level to 50 mts BGL

Supply & lowering of M.S ERW (Fincut) 200mm nominal dia casing pipe 6.0 mm thick duly beveled at 450 at both end as per IS 3589/4270 (Plain pipe)

Supply & fixing of 200 mm dia M.S ERW (Fincut) perforated pipe 6.0 mm thick

Supply & fixing of 200 mm dia casing shoe suitable for odex drilling and made out of EN-24 steel

Development/flushing of tube well by air compressor including erection, running of compressor and yield testing through "V" notch

Development of tube well by OP unit including carting of OP unit, T&P at site running of O.P unit and yield test of TW by "V" notch

Chemical & bacteriological test of water

SITC of Pumping Plant & accessories at Tubewell- Submersible pump set capable of delivering 100 lpm discharge at 155 mt. head with suitable capacity electric motor to be operated on 415(+\-) 10% volts, 3 phase, 50 C/s AC supply with 5 mt. submersible cable.

Automatic starter cum Panel suitable for above pump set.

Supply & fixing of 63 amp four pole MCB with enclosure box

Supply, laying & jointing of copper conductor, submersible cable 1x3x4 sq.mm

Supply of jointing material such as lugs, tape etc.

Double earthing with material

Main piping and valves

Pressure guage of range 0-20 kg/cm2 with control cock & accessories.

Chlorination dozing unit with chlorine solution & accessories

Supply of spare submersible pump set (specifications as sl. no. 11)

Supply of rubber resistance insulated sheets 2 m x 1 m x 25mm thick.

Painting of pumping plants.

S.I.T.C. of Intelligent GSM based mini remote terminal units /PLC with Analog & Digital Paramenter and features as specified mini tube well and transmit data on GSM backbone.GSM based wireless communication system capable to transfer and gather data from mini tube well to master control station (Voltage, current, power factor, pumping hour etc.)

Operation & maintenance of mini tubewell for 16 hrs. per day

M/S JAKIR HUSSAIN