Jal Jeevan Mission

Construction of 40,000 liters capacity Circular Over Head Service Reservoir (OHSR) with12.90 Mts staging with raft foundation for a wind pressure of 105.88 Kg/sqm using Vibrated Reinforced Cement Concrete M 30 Grade design mix and using 20 mm HBG machine crushed metal in the site selected by the department as shown in the drawings and specification as per the departmental procedure, including earth work excavation in all kinds of soils in wet or dry conditions except in rock for foundations fitted with (A) RCC or Aluminium ladder inside 0.60Mts wide (B) Spiral staircase on the out side shall be provided up to 200 KL Above 200 KL capacity dog legged staircase shall be provided with staircase flight width of 1.0 mts and landing width of 1.20 mts with SS railing up to 1.0 Mts height (C) Lightening arrestor including conductor and earthing as per IS 3070 earthing extended below the foundation (D) RCC finial ventilators with copper or stainless steel fly proof mesh (E) DI Man holes of 2 Nos frame and cover of 0.60x0.60 Mts size (light duty) as per IS specifications (F) Water level indicator of good quality with ebonite/ copper float of approved pattern - 1 No(G) The ladder shall be with MS ladder and verticals with HDPE of 10 Kgs/Sqcms shall beprovided for single column OHSR only. (h) Minimum staging for all ELSR/OHSR shall be 10.0Mts (i) The increase in staging shall be at 1.0 Mt interval. (j) The railing provided to thegallery and staircase shall be with stainless steel of grade 304 for a height of 1.20 Mts (k)The dog legged staircase shall be enclosed with brick/CRS wall on three sides and front sidewith MS collapsible gate up to 1st brace level from ground level to prevent unauthorizedentry (l) DI swan neck ventilators shall be provided in top dome and slab. (m) The aboverates are exclusive of all inlet, outlet connections and valves. All valves near inlet, out letand for scour of ELSRs shall be DI Valves of heavy duty confirming to the specification ofSOR item No: 28. (n) Rate inclusive of three coats of epoxy paint Food Grade of best quality to inner surface of the reservoir including roof dome (o) Two coats of whether proof emulsion painting for external surfaces, lettering, all required fixtures, pipes, bends ,valves etc., for pipe connections but excluding cost of pipes, bends and valves as per departmental designs and drawings, cost and conveyance of all materials, centering, curing, seigniorage, all labour charges and testing the reservoir for water tightnessetc.,complete., for finished item of the work Excluding Verical Connection

Construction of pipe line for water supply with HDPE 110 mm dia 6kg/cm2 Pipes, PE 100 including earth work excavtion for pipe line trench of size 0.70 X 1.00 M using 2/3 quantity with Machinary and 1/3 quantity with manual in all soils except Rock requiring blasting, lowering, laying and jointing of pipe lines true to alignment and gradient and refilling trenches with excavated earth (other than rocky soil and boulders) with watering, tamping and removeing surplus earth from site of work and filling pipe line with water and testing etc., complete but including cost of HDPE 110 mm dia 6kg/cm2 Pipes

Construction of pipe line for water supply with HDPE 90 mm dia 6kg/cm2 Pipes, PE 100 including earth work excavtion for pipe line trench of size 0.70 X 1.00 M using 2/3 quantity with Machinary and 1/3 quantity with manual in all soils except Rock requiring blasting, lowering, laying and jointing of pipe lines true to alignment and gradient and refilling trenches with excavated earth (other than rocky soil and boulders) with watering, tamping and removeing surplus earth from site of work and filling pipe line with water and testing etc., complete but including cost of HDPE 90 mm dia 6kg/cm2 Pipes

Supply & Fixing of House Service connection (PP Saddle) PP clamp saddles PP clamp saddles shall be manufactured by injection moulding using virgin polypropylene. Mechanical tapping saddles for water works purposed and designed for use with PVC(PE pipe as per IS 4985/ IS 4984 respectively. These saddles should be contoured to fit around the pipe. PP saddles shall be Blue/Black moulded in with Nickel plated brass / SS 304 metal female threaded outlets. Seal shall be thermoplastic washer with SS. The PP clamp saddle fittings shall be moulded with SS. The Pp clamp saddle fittings shall be moulded with SS 304/ Nickel plated Brass female threaded outlet inserted to connect necessary fittings. Thread dimension shall conform to IS 554/ISO-7. Adequate thickness of PP shall be provided to Hold bras insert in place and avoid leakage while pressure applications. Fasteners shall be threaded type, with SS fasteners of size 125mm and above. The grade of raw material used must be certified by WRAS, UK for type test as per BS 6920 form their certified laboratories like NSF International Ltd., UK and certificate of compliance to be produced for the following parameters i) Odour & Flavour of water ii) Appearance of water iii) Growth of Micro Organism iv) Extraction of Substances that may be of concern to public health (Cyto Toxicity) v) Extraction of Metals excluding all taxes (as per SoR 2022-23) with Cost and supply of tamper proof house hold Non return cum flow control valve (with all three parts made by using sold steel bars of SS 316) with CNC machine make and of 15mm dia designed for 5 LPM discharge @ 0.50 bar pressure loss, not exceeding the flow of 7 LPM at 1 bar pressure and working on float principle (as per CPHEO manual) including cost of materials, manufacturing, loading, unloading, stocking, transit insurance, transpiration but excluding GST with Compression male / female threaded adaptor with SS insert D20mm X ½” with Compression male / female threaded adaptor with SS insert D20mm X ½” with Manufacture, supply & delivery of HDPE pipe confirming to IS 4984-2016 of PE-100 grade material along with all fittings, including cost of materials, manufacturing, loading, unloading, stacking, transit insurance, transportation excluding all taxes with 20mm OD HDPE pipe 16.0 Kg/Sqcm with Laying, Jointing of 20mm dia HDPE pipes as per BIS No.7634 Part-II/75 including treanch excavation upto 0.50mts depth including testing, refilling etc., complete with Cost, supply & fixing of 15mm Nominal Bore GI pipe Medium Grade properties & Weight as per IS 12391 ISI mark with GI Fittings including the cost of pipe & its fittings, labour charges etc., complete excluding GST with S&F of 12.7mm brass bib cock (long body) Indian make heavy duty excluding GST and including Contract Profit 13.615% For 90mm X 1/2" FHTCs

Supply and delivery of 80mm dia P.N 1.6 "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation. For Disribution Main 80 mm PN 1.6 (MPa) on90 mm HDPE Line

Supply & Fixing of 40mm dia PN 1.6 (MPa) Tamper Proof DI Flanged Single Chamber Air Release Valves with body & cover made of Ductile Iron Grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with Food Grade Epoxy Powder Coating(EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005. All internal parts such as Float, shell, Cove Bolts etc. made of Austenitic alloy steel of SS AISI 304/316 and DN 50 float of and other components with ABS/PTFE/EPDM/NBR and generally conforming to DIN/BIS/AWWA standards (or) combination Flange drilling as per IS - 1538 and exclusive of all taxes and transportation. on 110mm dia HDPE Pipeline

Supply and fixing of Functional House Hold Tap Connections for making of Gi Distribution branch with GI main by supply and fixing of all lkspecials such as 20mm dia Couplings, Non Return cum flow control valve, 20mm dia GI Ellbow, 20mm dia Bid Cock, 20 mm dia GI pipe and Drilling hole for GI pipe line over for FHTCs including cost land coveyance of all materials and labour charges cutting threading and testing andall other labour charges etc., complete.SUPPORT TO FHTCs

Supply and Transportation of 10 HP 12-16 stages 5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding, Pump shall be suitable for various Fixing head and discharge with stainless steel shaft.Motor suitable for working on 415V ± 10% , Three Phase 50 Hz AC supplyexcluding all taxes etc complete. for 6" Bore well.Makes: Kirloskar / Crompton / Texmo / CRI / KSB/ Lubi/ PSG/ AryenVarsha

Fabrication ,transportationand and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side lovures with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets. Voltmeter ; 0-500 V, 0 to 20 Amps / 0 50 Amps Ammeter, Single phase preventor of suitable range, 32 A TP, 10KA MCB, Indication lamps (R-Y-B) with switch control - 1set, Voltmeter & Ammeter selector switch - 2 Nos, Supply and fixing of ISI Mark suitable capacitor Makes for up to 10HP with Star- Delta Starter of Make C&S/Crompton / L&T / Siemens/BCH.excluding all taxes etc complete.

Supply & Fixing of 3 Core 4.00 Sqmm Flat Copper cable of ISI for Submersible Motors of makes Finolex / Polycab / Gold Medal excluding all taxes etc complete.

Supply & Fixing of 50 mm dia Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete excluding all taxes etc complete.

Supply and Fixing of 16 Sqmm WPSC (Weather Proof Twin Core) ISI Alluminium Wire. Makes: Gold Medal (Supply of 7/20 Copper service wire)including cost and conveyance of all materials and labour charges etc., complete

Eraction charges of 10.00 HP submerssible pumpset with all its accessories including transportation of chain block and other necessary equipement and all labour charges etc. complete

Labour Charges of Jal Jeevan Mission Grant Name Board including cost and conveyance of all materials and labour charges etc complete