Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.4 LAccepted-AOC | L1 | Accepted-AOC Lowest quoted bidder. | |
| 2 | L2₹15.5 L+₹76,466 (5.18%)Rejected-Finance 38 BHARKATIYA JOSHI NEAR POST OFFICE JHULAGHAT ROAD PITHORAGARH UTTARAKHAND 262520 | PITHORAGARH | PITHORAGARH | UTTARAKHAND | 262520 | L2 | Rejected-Finance Higher quoted bidder. | |
| 3 | L3₹16.6 L+₹1.9 L (12.7%)Rejected-Finance | L3 | Rejected-Finance Higher quoted bidder. |
Tender Value
₹17 L
EMD Value
₹34,000
Closing Date
23 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Pithoragarh
GE Pithoragarh Post Bharkatia Pithoragarh ( UK)PIN-262520
MISCELLANEOUS REPAIR AND DAY TO DAY MAINT TO MD ACCN OF MAP PH-II OF 7 E AREA AT MIL STATION PITHORAGARH UNDER GE PITHORAGARH
2023_MES_623611_2
8540/PGH/E8
Open Tender
Civil Works
Item Rate
240 days
GE Pithoragarh
Class E, Category a(i)
6 documents required · 6 mandatory
₹500
GE Pithoragarh
₹34,000
Yes
8 Feb 2024
2 Dec 2023
30 Dec 2023
2 Dec 2023
23 Dec 2023
9 Dec 2023
Amount
DESCRIPTION OF ITEMS
Resecuring or Easing of door shutters for easy closing/opening, end tightening of butt hinges in position, adjustment of butt hinges in position, adjustment of existing iron mongry exc 1 Sqm and n.exc 2 Sqm each complete all as specified and directed
All as per item No.1 herein before but windows of almunium section n.exc 1 Sqm each complete all as specified and as directed.
Taking down door shutters from pressed steel door frame and replacing of unserviceable existing butt hinges and re-fixing in same opening including welding complete all as specified and directed.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L PCC 50mm thick 1:2:4 of type B1 using 20mm graded stone aggregate as floor finishing surface even and smooth without using extra cement laid in pannels complete all as specified and directed.
M&L for PCC 1:3:6 type C-2, (using 40mm graded stone aggregate) as in plinth protection laid in alternate panels 75mm thick finished even and smooth w/o using extra cement.
Forming construction joints 30mm deep x 10mm wide filled with sealing compound grade 'A'
S &F joint free coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry over 15 mm thick screed bedding in CM 1:6 and pointed in white or coloured cement to match complete all as specified and as directed.
S&F non-skid joint free ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 Sqm but n exc 0.18 sqm set and jointed in neat cement slurry and pointed in white or coloured cement to match as in vertical surface like dado/ skirting etc including 10mm thick rendering in CM 1:4 complete all as specified and as directed.
S&F Joint free Glazed coloured ceramic tiles in vertical surface 300x 200 X 7/8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick rendring in CM 1:4 complete all as specified and as directed.
Demoliton of precast cement concrete block walling, precast concrete articles etc complete.
M&L for Pre-cast cement concrete type C-1 (1:3:6) with 20 mm graded aggregate, block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and as directed.
M & L for providing cement concrete type B1 ( 1:2:4) using 20 mm graded stone aggregate, as in coping bed blocks including necessary form work complete all as specified and directed
M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and bindind with ms wire (annealed) not less than 0.9mm dia quality confirming to all as specified.
M & L for providing cement concrete type B1 ( 1:2:4) using 20 mm graded stone aggregate, as in coping bed blocks including necessary form work complete all as specified and directed
M&L for Cement concrete 1:3:6 type C2 (40 mm graded aggregate) in surface channels and drains complete all as specified and directed.
Taking down cement plaster on brick walls incl. raking out joints, hacking for key, scrubbing down with water etc.
M & L 15 mm thick cement plaster on fair faces of brick work or concrete surface on wall in CM 1:4 finished fair and even complete all as specified and directed.
M & L 15mm thick cement plaster on fair faces of brick work or concrete surface on wall in CM 1:6 finished fair and even complete all as specified and directed.
M&L 5mm thick rendering in CM 1:4 on ceiling, soffits, chajja projection complete all as specified and directed
M&L for applying two coats of exterior weather coat on newly plastered surfaces of wall including preparation on new surface.by applying exterior grads Birla care putty to gett smooth surface over one coat of primer complete all as specified and directed
M&L two coats of distemper oil emulsion on ceiling including preparation of newly plastered surface and complete all as specified.
S&F in repair of Non asbestos fibre cement building boards 4mm thick, fixed in ceiling flat or sloping and laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and directed.
S&F in repair for 80mmTubes, Light grade', galvanised, with all fitting and fixed complete to walls and ceiling or laid in floor complete all as specified and directed.
S&F in repairs for 15 mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor down complete all as specified and directed.
S&F in repairs for 20 mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed.
Taking down and refixing only old galvanized iron pipe 20mm bore in new or old position with new fittings as in wall and ceiling or laid in floors complete all as specified and directed.
Taking down and refixing only old galvanized iron pipe 15mm bore in new or old position with new fittings as in wall and ceiling or laid in floors complete all as specified and directed.
S&F in repairs 15mm bore dia of pipe Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm -210 gms )complete all as specified and directed.
S&F in repairs 20mm bore dia of pipe Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm -210 gms )complete all as specified and directed.
S&F in repair 15 mm bore dia Stop/angle valves fancy type Chromium plated screwed down , high pressure , with capston head, screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F in repair 15 mm bore dia two way angle valves/ two way bib taps fancy type Chromium plated screwed down , high pressure , with capston head, screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F in repair 20mm dia tubular Towel Rail 600mm long between flanges of brass chromium plated complete all as specified and directed.
S&F in repair Soap dish of cromium plated, fixed to plugs with chromium plated brass screws complete all as specified and directed.
S&F in repair brass Chromium plated shower roses 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.
S&F in repair Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed
S&F in repair 15mm bore fency type CP Brass Bib taps with capston head, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed .
S&F in repairs 15 mm dia Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed
Do - all as per above item but 20 mm bore
S&F in repair CP brass wall mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15mm bore complete all as specified and directed.
S&F in repair leg pair for central hole basin mixer (as per sample) for mixing hot & cold water screwed down for iron pipe and fixed with pvc conncetion complete all as specified and directed.
S&F in repair CP Brass central hole basin mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15mm bore complete all as specified and directed.
S&F in repair brass legs for wall mixer complete all as specified and directed.
S&F in repair toilet paper holder of chromium plated (CP) with brass screws complete all as specified and directed.
S & F in repairs vitreous china hand wash basin white exclusive quality flat back size 550 x 400 mm including brackets, PVC waste pipe and waste coupling fixed complete all as specified and directed.
S&F in repairs 600mm long PVC Connection 15mm size with PTMT nuts complete all as specified and directed.
S&F in repairs 450mm long PVC Connection 15mm size with PTMT nuts complete all as specified and directed.
S&F in repairs viterous China wash down water closet EWC including to connection to drain and flush pipe (excluding flushing cistern and flushing pipe) incl trap set complete all as specified
S&F in repairs viterous China wash down water closet ,semi pedestal pattern( Anglo Indian type) including to connection to drain and flush pipe (excluding flushing cistern and flushing pipe) but incl trap set complete all as specified
S&F in repairs 10 litre capacity PVC valveless, Syphonic action type, fluhing cistern low level,white with inlet ball valve, float and handle complete all as specified and directed.
S&F in repairs 500 liters capacity rotational moulded polyethylene water storage tank (Cylindrical vertical with close top) hoisted and fixed in position including connections incl 20mm bore dia of pipe Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball all as specified.
S&F in repairs 250 liters capacity rotational moulded polyethylene water storage tank (Cylindrical vertical with close top) hoisted and fixed in position including connections incl 15mm bore dia of pipe Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball all as specified.
S & F as in repair Butt hinges 100 mm, extruded aluminium alloy with galvanized mild steel hinge pin, anodised of type C-21 and complete all as specified and as directed.
S&F as in repairs 200mm aluminium anodised barrel tower bolts of extruded section all as specified
S&Fas in repairs 150mm aluminium anodised barrel tower bolts of extruded section all as specified
S&Fas in repairs 300mm aluminium anodised sliding door bolt of extruded section all as specified
S& F as in repairs 150 mm extruded aluminum alloy handles, fabricated type anodised.
S&F as in repair 100 mm Butt hinges, medium weight, cold rolled mild steel, fixed to steel frames with and including welding etc complete all as specified
S&F in repairs Stasinless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple/ rubber or aluminium beading if required in wooden or aluminium frame complete all as specified and as directed.
S&F in repair 28mm dia fancy type wooden finish MS dropery rod fixed with wooden finale stop, brackets etc to wall complete as sample approved all as specified and directed by Engr - in - charge.
S&F in repair 300mm mild steel,ordinary rat tail rod pattern spring including roller and plate and fixing by welding or screws etc complete all as specified and directed.
S&F in repair of curtain rod 20 mm dia mild steel CP with fixing brackets ,stop, roller etc
Taking down aluminium sliding shutters of any size and refixing after rescuring the pintols/hinges,oiling, adjusting providing packing if required complete all as specified
S&F sheet glass 5.00 mm thick ordinary quality and glazing with rubber and aluminium beading/wooden beading/glass putty in square n.exc 0.5 sqm in each pane including hacking out of old broken glass complete all as specified
S&F in repair sheet glass 5.5 mm thick ordinary quality and glazing with rubber and aluminium beading in square exc 0.5 sqm in each pane including taking down all as specified
M/L for 14 mm to 16 mm thick baroda green stone slab toping table rubbed and mirror polished over 15 mm thick screed bed or bedding layer ( 1:4) and jointed with white cement slurry mixed pigment to match the colour incl rounded / half rounded edge as in steps, jambs, pillars, window-cills, cooking platforms and like with a hole for gas pipe in cooking platform etc. Including dismentling complete all as specified.
Ditto all as per item No 69 but on vertical surfaces over 10 mm thick rendring in CM 1:4
S&F in repairs Cast iron floor trap,75 mm with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed
S&F for Cast iron soil, waste and vent pipe, 100mm bore, sand cast in any length, with or without ears, with cement joints, fixed to walls with and including stack clamps, nuts , bolts etc. and making necessary connections, after taking down of existing unserviceable pipes complete all as specified.
S&F for Cast iron soil, waste and vent pipe, 75mm bore, sand cast in any length, with or without ears, with lead joints, fixed to walls with and including stack clamps, nuts , bolts etc. and making necessary connections, after taking down of existing unserviceable pipes complete all as specified
S&F in repair Cast iron cowls of 50mm bore.
S&F CI Bends (any radius), 100 mm dia diminishing pieces or tapers (larger bore measured) complete.
S&F CI Bends (any radius), 75 mm dia diminishing pieces or tapers (larger bore measured) complete.
Supply and fixing in repairs salt-glazed stone ware gully trap square or round mouthed, type 'P' 150mm x 150mm, including provision of C.I grating over the trap and embedding the trap in PCC 1:3:6 Type C-2 block of size 30 cm x 30 cm x 45 cm deep. ( Cost of PCC block also included in this item) complete all as specified and directed.
S&F in repair for Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed.
Supply and fixing in repairs SS Jet spray with flexible pipe 15mm dia not less than 1.50 mtr long complete all as specified and directed.
S&F for Frosted glass ordinary quality 4 mm thick and glazing with rubber and aluminium beading in square n.exc 0.5 sqm in each pane in repair complete all as specified and directed.
S&F in repairs for Continuous (Piano) hinges 30 mm , mild steel, bright finish or electro-galvanised fixed in cupboard/kitchen cabinet as in repair complete all as specified and directed.
Supply and fixing in repairs hasp and staple 100mm size ( ISI Marked), safety type aluminium anodized including bolt to hinge plate, fixed as in repair all as specified and directed.
S&F in repairs of magnet catches in cupboard/ kitchen cabinet to receive shutter and fixed with including fittings complete all as specified and directed.
S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified
Supply only Liquid water proofing compound ( ISI Marked) complete all as specified and directed.
Supply and fixing in repairs plastic water closet seat any colour, closed pattern with recessed bottom and cover with hinging device.
Taking down carefully top covers of EWC and refixing the same after straightening, aligning etc complete all as specified and directed.
S&F for PVC waste pipe 32 mm to 40 mm dia size of adequate length (minimum length 60cms) suitable for WHB/Sink with PVC adapter fixed in repairs complete all specified and directed
S&F in repairs for Brass chromium plated waste couplings of dia 32 mm for WHB fixed complete all specified and directed
S&F in repairs 40 mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed
S&F in repairs aluminium peg set of Six complete all as specified and as directed.
S&F in repairs PVC water tank covers of capacity n exc 250 Ltrs complete all as specified and directed.
S&F in repairs PVC water tank covers of capacity exc 250 Ltrs not exc 500 Ltrs complete all as specified and directed.
Taking down chokhats or frames (without taking off shutters from the frame) exc 1.5 sqm and n.exc 4.00 sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.
Taking down chokhats or frames (without taking off shutters from the frame) n.exc 1.50 sqm including cutting holes and making good reqd shape for hold fast block for new frame complete all as specified directed.
Taking down shutters of any description exc. 1 Sqm and nexc. 2 Sqm each and Ditto
S&F for 32mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as directed and specified.
S&F for 25mm thick flush shutter for cupboard/ kitchen cabinate of , particle board core construction, with block board core and plywood face panels, commercial type on both sides complete all as directed and specified.
S&F in repairs for 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in repair complete all as directed and specified.
S&F for 30mm thick Glazed and skeleton shutters, of 2nd class Hard wood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified directed
M & L preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer on new wooden surfaces all as specified.
S&F for Pressed steel frames for doors (125X60mm) with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified directed
S&F for Pressed steel frames for doors (105X60mm) with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified directed
S&F for Anodised aluminium frame for windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified
S&F for Anodised aluminium window shutters, sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified .
S&F for Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. M S frame shall be covered with heat moulded plain coloured PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain coloured PVC sheet for top rail, lock rail and bottom rail; panelling of plain coloured PVC sheet to be fitted in the MS frame welded /sealed to the stiles & rails with 5mm x 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm on exposed side of shutter.
S&F for Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawings including all fixtures shown on drawings. Make for materials : Rajshree Doors or equivalent as approved by GE. Note:-(i) Frames shall be fabricated by authorized dealer of M/S Rajshree Indore using PVC sheet manufactured by M/S Rajshree Indore. (ii) Provision of tie rod in shape of internal MS tube or round bar etc of any size adequate to keep the chowkhat in true position shall be provided before covering the frame with PVC sheet at workshop. For the purpose of measurement & payment length of chowkhat without tie rod shall be measured.
S & F Butt hinges 100 mm, extruded aluminium alloy with galvanized mild steel hinge pin, anodised of type C-21 and complete all as specified and as directed.
S&F 200mm aluminium anodised barrel tower bolts of extruded section all as specified.
S&F 150mm aluminium anodised barrel tower bolts of extruded section all as specified.
S&F 300mm aluminium anodised sliding door bolt of extruded section all as specified
S& F 150 mm extruded aluminum alloy handles, fabricated type anodised.
S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring 150 mm long complte all as specified
Repair to low level flushing cistern PVC for making it fully functional and leak proof by replacing PVC syphon kit complete all as directed and specified.
Repair to brass bib cock/ Angle valves/ Stop cock by washer, jumper washer etc by taking down and refixing complete all as specified and directed.
Repair to existing CP brass wall mixer/central hole basin mixer of hot and cold supply by replacing and including brass spindle including taking out , repair and refixng in same /another location complete all as specified
Repair to central hole basin mixer by replacing washer including taking down and refixing complete all as specified and directed.
Repair to wall mixer by replacing washer including taking down and refixing complete all as specified and directed.
Repair to leakage/ sepage from toilet by tightening and refixing of joints of CI/GI pipe with solvent/ M- seal of including taking down and refixing existing false ceiling and making good the disturbed surface complete all as specified and directed.
Repair to cup board/ kitchen cabinat door shutter by easing tightened of hinges and adjusting in position complete all as specified and directed
Repair to float valve of over head tank any size by adjusting/refixing ball and rod or by tightening and refixing complete all as specified and directed.
S&F in repairs Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring 150 mm long complte all as specified
M&L for Providing APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by forced application after cleaning the surface completely to eliminate all sharp portion over 10 mm thick screed bed in CM (1:4) mixed with WPC @ 3% of weight of cement or as per manufacturers instructions, including removing old APP membrane, and applying a coat of aluminium paint complete all as specified.
S&F in repairs PVC cabinet mirror bathroom box type complete all as spd and directed
S&F in repairs for CP health fauscet( hand shower ) with 1.5 m long SS flexible tube and wall hook complete all as spd and directed
S&F in repairs kitchen plate rack of SS of size 720 mm x 600 mm x 230 mm made out of 1 mm thick stell sheet complete all as spd and directed
SK Traders Sons
shivam builders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .