Renovation of latrine block at Lactam go-down in FACT Petro UC

Renovation of latrine block at Lactam go-down in FACT Petro UC

Dismantling and removing doors with or without ventilators, including removal of shutters, hinges, hold fasts and all other fittings and stacking materials in Carpentry shop or MCD as directed.

Dismantling and removing carefully the existing brick/rubble/laterite masonry in cement mortar at all levels and conveying and depositing the debris and stacking the serviceable material at places pointed out within a distance of 150m.

Dismantling and removing the existing CC/RCC works and conveying and depositing the debris at places pointed out within a distance of 150m as directed by Engineer-in charge.

Collecting waste materials, debris, spoil earth and any other unwanted materials from all floors of buildings, drums, pits etc. and heaping within a distance of 100M as directed for measurement and dumping it in the low lying areas upto a distance of 5KM as directed at site.

Supplying, fabricating, and fixing reinforcement to RCC works at all levels with High strength deformed bars Fe 500 grade conforming to IS 1786 including all charges for uncoiling and straightening rods, cutting rods, bending cold, placing in position and tying with tying wire etc. complete.

Drilling holes on beam to a depth of 15 cm suitable for 8mm rebar and fixing rebars in the holes with Hilti HIT-RE 500

Providing form work to RCC / CC works with necessary wooden planks, joists, runners, struts, posts etc. including removal after completion/ curing for foundation footings, machine equipment foundations and pedastals over foundation footings, sides of trench walls, plinth beams and rafts, pile caps and mass concrete works etc.at all levels inside factory area.

RCC work 1:1 1/2:3 nominal mix using first class 20mm and down grade hard granite broken stones including all charges for mixing , laying, consolidating, curing, handling and fixing in position, etc. complete but excluding cost of form work and reinforcement for foundation footing, bottom and sides of trench , raft, plinth beams and pedestals over foundation footings of all shapes pile caps and mass concrete.

Solid concrete block masonry in cement mortar 1:5 using good quality cement concrete blocks approved by the Engineer in charge for superstructure in ground floor/upto 5m height from plinth level/floor level.

Plastering with cement mortar 1:4, 12mm thick, one coat floated hard and trowelled smooth at all levels.

Providing and laying anti skid ceramic floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey,Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc.,complete.

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622(thickness to be specified by the manufacturer) of approved make in all colours, shades and size, in skirting and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with matching pigment, cost and conveyance of all materials, labour charges, lead, lift etc. complete at all levels in approved size & pattern from approved manufacturer as directed by the Engineer in-charge for toilet wall and kitchen.

Hacking of CC flooring including cleaning the surface etc. complete as per direction of the Engineer-in-Charge.

Providing and laying Vitrified tiles in floor having a size of 60X60 cms (thickness to be specified by the manufacturer), with water absorption less than 0.08% andconforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive(water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints .

Supplying and fixing PVC floor trap with strainer (PVC solo grating) of approved brand 110mm size with required provision of outlets and inlets, locking tile, strainer, etc. as per manufactures specifications, cutting and making good the walls and floors, etc. complete.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore.

Supplying and fixing Over Head Shower with shower arm and wall flange with chrome finish (Hindware or similar)

Supplying and fixing Stainless Steel angular Stop cock with wall flange "CERA/ HINDWARE or equivalent type

Supplying and fixing 600 x20 mm or nearest Stainless steel heavy duty approved brand towel rod with brackets with necessary SS screws, pastic grips etc. complete

Supplying and fixing Stainless steel soap tray size150X100mm

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

Supplying Health Faucet Hindware / Cera

Supplying and fixing white glazed vitreous china flat back lipped front urinal of size 430x380x230mm or nearest size (Indian make best quality) with 1NO. 15mm pvc heavy type connection with CP learning nut and 1No. 15mm CP regulating valve (Parryware, Cera , Hindware or equivalent ) of superior make, CP spreader with flush pipe, fixing the urinal to wall with necessary wooden plugs & iron screws including cutting and making good the walls etc. complete.

Providing and fixing PVC door with shutter consisting of shutter frame made of extruded plastic section having dimension of 48x24mm paneling with multi chambered hollow plastics section of 200x20mm with an average wall thickness of 1mm jointed with one another by a tongue and groove joints and outer frame of door made of extruded plastic section of 68x60mm or nearest on all sides including Providing and fixing all required fittings such as anodised aluminium butt hinges, tower bolts, handles with screws, MS hold fasts for fixing door frames etc. complete as per manufacturer's specification.

Supplying and fixing PVC pipes conforming to IS 4985-2000 class II - 4kg/cm2 for soil waste and rain water lines with all required specials such as plain bends, single junctions,elbows, crosses, unions, shoes, door bends, double junctions, vent cowls etc. with or without door including cutting masonry or concrete floors , sunshades etc wherever necessary and jointing pipes with approved quality resin cement and fixing pipes with MS fixing clamps screwed on to wooden plugs embedded in masonry wherever required and painting the clamps with two coats of enamel paint over one coat primer etc. complete - 110mm or nearest OD .

Supplying 25mm OD class - 4 PVC pipe

Supplying 20mm OD class - 5 PVC pipe (10kg/sq.cm)

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

T K SALIM

SAJEEV AK