SPECIAL REPAIR FOR LIGHTING CONDUCTOR AND OTHER SANCTIONED WORKS UNDER GE MISAMARI

Amount

Surface dressing not exceeding 15cm deep in soft/loose soil complete all as specified as directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil, complete all as specified and directed.

Excavation in trenches not exceeding 1.5 metre wide for foundation etc or for shafts, wells cesspits, manholes etc not exceeding 10 Sqm on plan and exceeding 1.5 metre and n exc 3 metre in depth and getting out in soft / loose soil complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 Cum, getting out getting out in hard/dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point in soil complete all as specified and directed.

Removing excavated material exc. 1.50 km but n exc 5 Km and depositing where directed at a level n exc. 1.5 m above the starting point in soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and directed.

M&L for 100mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in sub base, complete all as specified and as directed.

M&L for 100mm thick PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in sub base of floor complete all as specified and as directed.

M&L for 150mm thick PCC (1:2:4) type B1 ( using 20 mm graded stone aggregate) as in finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for 75 mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection , finishing cement concrete surfaces even & smooth without using extra cement.complete all as specified and directed.

M&L for 100 mm thick PCC (1:2:4) type B2 (using 40mm graded stone aggregate) as in plinth protection/approch, complete all as specified and as directed.

M&L for Cement concrete (1:4:8) type D2 ( using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M&L for cement concrete (1:2:4) type B2 (using 40mm graded stone aggregate) as in foundation complete all as specified and directed.

M&L for Cement concrete (1:3:6) type C2 (using 40mm graded stone aggregate) as in foundation filling / mass concrete, complete all as specified and directed.

M&L Pre-cast Reinforced Cement Concrete (1:2:4) type B1 ( using 20mm graded stone aggregate) providing, in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts,boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc.(of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar 1:4 complete with joints to match, complete all as specified and directed.

M&L for Reinforced Cement Concrete (Nominal Mix) 1:2:4 type B1 ( using 20mm graded stone aggregate) in Foundations including Rafts, Footings, Foundation Beams; Plinth Beams; bases for Columns, etc.; Basement Slabs, Under-reamed Piles and Mass Concrete, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Items.

M&L for Reinforced Cement Concrete (Nominal Mix) 1:2:4, type B1 ( using 20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.50 Metre span, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Items.

M&L for Reinforced Cement Concrete (Nominal Mix) 1:2:4, type B1 ( using 20mm graded stone aggregate) as in chajjas, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Items.

M&L for burnt brick work with sub class `B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 all as specified and directed.

M&L brick work with sub class'B' bricks, straight or curved on plan exc 6m radius in half brick wall built in CM 1:4 complete all as directed.

Use & Waste Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; lintels, cjajjas and similar work; vertical or to batter flat surface complete all as specified and as directed.

Use & Waste formwork to sides of concrete of columns, pillars, Chajjas, posts with rough finished square/rectangular surfaces of concrete complete all as specified and as directed.

M&L for sand filling under floors spread, levelled, watered and well rammed in layers n.exc 25 cm thick, complete all as specified and as directed.

M&L for TMT Bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed.

M&L for TMT Bars 5mm dia and over upto and including 10mm dia in Stirrups, Spacers and Binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed.

M&L for preparing newly plastered surfaces of wall and applying Three Coats of White Wash, complete all as specified and as directed

M&L for preparing old plastered surfaces of wall and applying One Coats of White Wash, complete all as specified and as directed

M&L for Non skid ceramic coloured jointless tiles 7 to 8mm thick (Square/ Rectangular) area of each tiles exceeding 0.11 Sqm but n.exc. 0.18 Sqm in floors etc. over and including 15 mm thick screed bed in CM 1:4 set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles complete all as specified and as directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240, complete all as specified and as directed.

S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheetng 0.50mm thick of an colour having tensile strengthof 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

S & F of pre-painted color galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L for preparing new or previously untreated Steel and Iron Surfaces of any description, over. 10 Cm Width or Girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

M&L for preparing new or previously untreated Steel and Iron Surfaces of any description, not exc 10 Cm Width or Girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

M&L for Rendering 15mm thick in Cement Mortar 1:4 on fair faces of Brick Walls or on Concrete Surfaces, plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L Hardcore of gaugeof broken stone n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered andnrammed to a true surface,complete all as specified and as directed.

S&F Factory made Solid PVC Door Frame of size 50x47 mm made out of 5.0 mm thick plain colour PVC Sheet reinforced with Mild Steel Square Tube and fixing in opening as per Specification and Drawing of MES Schedule Part-II, complete all as specified and as directed.

S&F Factory made Solid Panel PVC Door Shutter 30mm thick (Style) consisting of Frame made out of Mild Steel Square Tube for Top and Bottom Rails, mild steel Frame shall be covered with heat moulded plain colour PVC 'C' Channel having PVC Sheet Strip 20 mm wide stuck inside with Solvent Cement for Styles and plain colour PVC Sheet for Top Rail, Lock Rail & Bottom Rail on either side and as gap insert for Top Rail, Bottom Rail Panelling of plain colour PVC Sheet to be fitted in mild steel Frame welded/sealed to the Styles and Rails with suitable Sheet Beading and jointed together with Solvent Cement and fixing in the Frame at Site as per Specification and Drawing of MES Schedule Part-II, complete all as specified and as directed.

Supply and fixing 100mm long stainless steel butt hinges complete all as specified and as directed.

Supply and fixing 150mm long aluminium bow handle complete all as specified and as directed.

Supply and fixing 150mm long aluminium tower bolt complete all as specified and as directed.

Supply and fixing 200mm long aluminium sliding door bolt complete all as specified and as directed.

S&F chromium plated brass two-in-one bib cock with wall glange, fixed with 15mm bore iron pipe as in repair etc. complete all as specified and as directed.

S&F 15 mm bore stop valves cast copper alloy,fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe of 15 mm bore of pipe fixed complete all as specified and directed.

Supply and fixing of waste coupling of 32mm bore of discharge pipe, PTMT (half or full threaded) .(Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and as directed.

S&F 10 ltr capacity PVC valve less, Symphonic action type flushing cistern. Low level white with inlet, ball valve float and handle including bracket including PVC connection fixed, complete all as specified and as directed.

S&F GI tubes 15mm bore, medium grade with all fittings and fixed to wall and ceiling or laid in floorscomplete all as specified and as directed.

M&L for Rotational Moulded Polyethene Water Storage Tank 500 Litre Capacity (Cylindrical, Vertical with Closed Top), 3 layered, hoisted and fixed in Position all as specified in MES Schedule , complete all as specified and as directed.

S&F PVC (SWR) 110mm bore (dia) soil, waste and ventilating pipe, single socketed in any length with rubber ring joints fixed to walls with and including all necessary fittings such as bend, tee, junctions, traps etc, complete

S&F for 110 mm PVC(SWR) Bend any radius, complete all as specified and as directed by the Engineer-in-charge.

Supply and fixing PVC(SWR) vent cowl 110mm dia, complete all as specified as directed

M&L for Rendering 15mm thick in Cement Mortar 1:4 on other than fair faces of Brick Walls or on Concrete Surfaces, plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L for 20mm thick plaster on fair faces of brick work or concrete surface in cm (1:4) with wpc @2% by weight face of conc work to wall surface and the surface is finished even and smooth without using extra cement, complete all as specified and as directed.

Supply only integral Water Proofing Compound

S&F roof trusses (framed) trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam tee, angle, channel or flat sections) including clits etc confoRming to Fe-410-0 or Fe-310-0, complete all as specified and as directed.

S&F channels square or notched (ordinary & counter sunk) with riveted, bolted or welded attachment conforming to gde Fe-410-0 or Fe-310-0, complete all as specified and as directed.

S&F mild 12 mm steel screw bolts with hexagonal or square heads at one end and screwed the other and screwed end to be fitted with washers, one nut exc 45cm long and dia of neck exc 12mm & n.exc 20mm

M&L for glazed ceramic coloured tiles, glossy finished of size 450x350x7mm thick as in vertical surfaces such as skirting/dados and riser of stems., over and including including 10 mm thick rendering/backing coat in CM 1:4 and set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles,complete all as specified and as directed.

S&F for PVC ventilators frame work with multiple chamber hollow PVC section comprising of DWUF 405(40x46mm)(3 mm pin headed glass using extruded PVC section having dia of 0.9x14.5mm EDPM gasket, complete all as specified and directed.

S&F vitreous china squatting Orissa pattern Water closet, size 630x450 mm white, with 'P' or 'S' Trap, integral foot rests etc. complete including making good to floor, complete all as specified and as directed.

S&F vitreous china wash hand basin, white size 550 x 400 mm incl bracket & waste coupling complete all as specified and as directed.

S &F Vitreous china urinals, bowl type flat back size 465 x 355x 265 mm white minimum with grating and union for discharge pipe , complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, complete all as specified and as directed.

S&F urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (miniumum weight 60 gms), complete all as specified and as directed.

M&L 100 mm bore for cast iron Nahani trap with grating incl jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), complete all as specified and as directed.

M&L for Concrete bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested; in Cement concrete 1:4:8 type D-2, complete all as specified and as directed.

M&L for Reinforced concrete pipes, class NP2, Bore of pipe 150 mm dia laid and jointed complete with collars , complete all as specified and as directed.

S&F 20 mm dia ball valves, PTMT high pressure of epoxy coated Aluminium rod and high density plastic ball (200 gms) complete, screwed for iron pipes or brasas ferrule and fixed, complete all as specified and as directed.

Supplying, laying and testing of 100 mm internal dia of double wall corrugaed (DWC) high density polythylene pipe (HDPE) and stiffness classes 8 (SN-8) with ISI marked (With CML No ) with and including all fittings & jointing materials for connection of inspection chamber/WC to first manhole of the sewage line, complete all as specified and directed..

M&L Cutting into existing manholes of 150 mm dia for connecting new drains making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B1, smooth finished and reforming benching as required, complete all as specified and as directed.

M&L for preparation of wall surfaces and applying two coats of cement base paint over a coat of primer, complete all as specified and as directed.

Forming letters, figures etc. by cutting 'V grooves in new lime, cement-lime or cement plaster (per cm of height), complete all as specified and as directed.

M&L for machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness , M -35 grade, over and including 50mm sand coushing, complete all as specified and as directed.

S&F Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates,tee, complete all as specified and as directed.

S&F roof trusses (framed) trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam tee, angle, channel or flat sections) including clits etc confoRming to Fe-410-0 or Fe-310-0, complete all as specified and as directed.

S&F Flat iron of size 40X6 as in wind ties conforming to Fe-290 Gde E-165, complete all as specified and as directed.

S&F plates (plain or chequed) channels square or notched (ordinary & counter sunk) with riveted, bolted or welded attachment conforming to gde Fe-410-0 or Fe-310-0, complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down wit water to remove, complete all as specified and as directed.

M&L for kota stone slab 20-25 mm thick in skirting/dado and pillar laid over 10mm thick screed bed and jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing and pulishing, complete all as specified and directed.

Supply and fix harrison rails, mild steel, chromium plated fixed alongwith2 Nos of brackets, stops, roller et, complete all as specified and directed.

Supply and fix aluminium frame for doors, windows, ventilaters with one or more rebates including joining cleat for fixing etc incl powder coating of any colour( thickness of powder coating not less than 50 micron) , complete all as specified and directed.

S&F anodised aluminium door shutters aluminium sections weighing 0.55 Kg/Metre including necessary joining cleats, glazing clips, rubber neoprene packing anodised aluminium snap beading screw etc, complete all as specified powder coating of any colour ( thickness of powder coating not less than 50 micron).

S&F for anodised aluminium window shutters, side hung type without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleat, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws, anodised aluminium fittings such as peg stay 150mm long (1 no) , hinges type B-21, 100 mm long ( 2 nos) suitable handle (1 no) powder coating of any colour ( thickness of powder coating not less than 50 micron). complete all as specified and directed.

S&Ffor 4 mm thick sheet glass, ordinary quality and glazing with wooden beads in squars not exc 0.50 Sqm in each pane, complete all as specified and directed.

S&F for rolled mild steel Fe-410-W (Gde E-250 quality A) for framed work as in doors or gates of angle or other section with gusset plates, rail, braces etc complete, drilled for fixing of steel sheeting or other covering, Doors etc to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings also fastening & fixing, complete all as specified and as directed.

S&F 1.25mm thick rolling shutters, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected inposition as indicated, complete push pull or manual type gear operated type with with bevel gear box and crank handle, complete all as specified and as directed.

S&F for framed work such as grill, greating, etc with ends of bars shouldered and/or riveted , forged into spikes, framed guard bars, barred iron doors, ladder, frmed similar wor confirming to Fe 290, Gde-E-165, complete all as specified and as directed.

M&L for applying Two coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43litre/10 Sqm over and including primimg coat of exterior primer applied @ 0.90 litre/10 Sqm over new surface, complete all as specified and directed.

M&L for Complete removal of old surface and M&L for applying Two coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43litre/10 Sqm over and including primimg coat of exterior primer applied @ 0.90 litre/10 Sqm over new surface, complete all as specified and directed.

M&L Point Wiring with 1.5 Sqmm Copper Conductor single core PVC insulated Flame Retardant Low Smoke (FRLSH) Unsheathed 1100 Volt grade multi-stranded Cable drawn through and including Concealed Rigid PVC Conduit, medium grade, ISI marked of suitable size and its Accessories as required at Site, fixing on surface of Wall, Roof, mounted on Sunk Mild Steel Pressed Terminal Box 1.22 mm thick of suitable size duly painted with red oxide metal primer with 3.0mm thick Plastic Laminated Sheet Top Cover for mounting Switches, Sockets, etc. including PVC insulated and unsheathed Single Core multi-stranded Copper Conductor Cable of size 1.5 Sqmm (FRLSH) Green in Colour as Earth Continuity Conductor connected to Common Earth and Earth dolly for One Light Point controlled by One 1-Way Switch 5 Amp, complete all as specified and as directed.

All as per item No 90 here in before but, for one Ceiling fan / Exhaust Fan point controlled by one, one way switch and regulator, complete all as specified and as directed.

S & F Switch piano flush type single pole one way 5 Amp, 230 Volts, complete all as specified and as directed.

S&F ceilling rose three terminal surface bakelite type AC 50 Hz 230 Volt of size 65x50mm, complete all as specified and as directed.

S & F ceiling fan regulator step type, flush type heavy duty suitable to work on 230 Volt AC supply , complete all as specified and as directed.

S & F lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings fixed with PVC round/square blocks, complete all as specified and directed.

S&F LED ADORE 15 W B22 CDL 5 STAR LAMP with B 22 base capacity 1200 lumen complete all as specified and directed. Make : Cat No - LHLDEUEBML8Z010 of Havells or equivalent in CG/Surya.

S & F wall mounted LED 18 watts ,Batten type T 8 light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including Ultra bright LED polycarbonate (T8) tube (Single side connection) 4' x 18 watts with G13 lamp holder complete all as specified and directed. Make : Model No. SLE TL DS 18 P AL EXT (for TUBE) & SUB 118 T8 LED( for BATTEN) of SURYA, or equivalent in HAVELLS/CROMPTON.

S & F wall mounted LED 18 watts ,Batten type T 8 light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including Ultra bright LED polycarbonate (T8) tube (Single side connection) 4' x 18 watts with G13 lamp holder complete all as directed. Make: Model No. REGALBATTENT8UPTO1X18WDSBSWH for Batten and Model No. PHOTONULTRAE2.01213T8SSTL18WLED865SPC For T8 tUBELIGHT of HAVELLS or equivqlent in CG/Polycab.

S&F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and PC Cover having TOP opening seperate driver compartment with IP 66 Protection and impact resistance of IK07 with electronic driver of capacity 15 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete all as directed. Make : Model No. ENDURAPEARLSL25WLED757SAYTOPCMP of Havells or Equivalent in CG/polycab.

M & L sand cushioning in trenches for cable protection with coarse sand laid dry in trenches with uniform thickness including consolidation, complete all as specified and directed.

Supply & Laying well burnt brick , locally available best quality (sub class "B" bricks ) laid in trences perpendicular to UG Cable protection, complete all as specified and directed.

Supply and fixing 5 star rated BLDC ceiling fans AC 230 Volts single phase 1200 mm sweep complete with all accessories including MS Hook, Nuts, Bolts and washer for hanging arrangement complete all as specified and directed. Make: Model No. Energia 32 5 Star of USHA or equivalent in Bajaj/Crompton

M&L for earthing complete with galvanised steel earth plate electrode size 600x600x6.0mm thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanised earth lead wire 4.0 mm dia means of bolts, nuts, check nuts and washers of galvanised steel and GI pipe light grade 20mm dia bore for watering funnel with wire mesh refilling with vegetable soil without bolders and stones, gravels and aggregate etc,and CI cover with frame, PCC chamber pit with PCC 1:3:6 type C-2 excavation and earth work all as shown in electrical plate No 3 connected to earthing test point all as specified or indicated including testing on completion. NOTES : The unit rate includes for protection pipe and GI strip 4.00 mm dia from top of earth plate up to 5.00 metre above ground level.

S&F LED ADORE 10 W B22 CDL 5 STAR LAMP with B 22 base capacity 1200 lumen complete all as specified. Make : Cat No - LHLDEUEBML8Z010 of Havells or equivalent in CG/Surya.

S&F pre-wired double door MCB DB made out of 18 SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 200 Amps rated bus bar , 4 way double door open able , complete all as specified and directed.

S & F MCB Double Pole 20 Amps 240/415 Volt, confirms to IS/IEC 60898 Braeking Capacity of 10 kA, C-curve, complete all as specified and directed.Make : Cat No. BB20320B of L&T or equivalent in Schinder/ Legrand.

S & F MCB SP, 240 volts, 6A Amps 50 Hz ,confirms to IS/IEC 60898 Braeking Capacity of 10 kA, C-curve, complete all as specified and directed. Make : Model No. BB10060B of L&T or equivalent in Schinder/ Legrand.

S&F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and PC Cover having TOP opening seperate driver compartment with IP 66 Protection and impact resistance of IK07 with electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape, complete all as specified and directed. Make : Model No. ENDURAPEARLSL25WLED757SASYTOPCMP of Havells or Equivalent in CG/Polycab.

Supply & Laying LT UG XLPE cable of size 2 core x 10 sq mm laid in trenches/ floors/ on wall/ service connections PVC insulated, sheathing and armoured 1100 volts grade with aluminium conductor with necessary end terminal/ cable gland as per site requirement including connecting to the main switches/ cut outs MCB/ MCCB with necessary lugs after cutting to required length of cable, complete all as specified and directed.

Taking down the existing unservicable Earthing of any type/ description as existing at site including taking out of rusted GI plate by removing nuts bolts etc all as,complete all as specified and directed.

Taking down the existing unservicable/ broken GI /Al strip of any type/ description as existing at site including removing all connection from unsv LA and earthing pit etc, complete all as specified and directed.

Taking down carefully the existing unservicable/ broken pole mounted Lighting arrester of any type/ description as existing at site including removing all connection from GI poles etc, complete all as specified and directed.

Taking down old UNSV ACSR any size from poles including stringing on LT poles complete incl aluminium binding wires,jumpering,bindings at insulators etc, complete all as specified and directed.

Earthing complete with copper earth plate electrode 60cm x 60cm x 3.15 mm thick burried directly in ground to a depth not less than 2.25 mtrs below ground level with top edge of earth plate not less than 1.5 mtrs below normal ground level connected to copper earth strip 20 x 3 mm thick drawn through and including GI protection pipe of light grade 40 mm bore by means of bolts, nuts, check nuts and washers including excavation earth work provisioning of PCC chamber made of PCC 1 : 3 : 6 RCC cover funnel with wiremesh 20mm dia watering pipe Medium grade, GI protection pipe 20mm dia bore all as specified in Electrical Plate No.3 of SSR Part-I. Note : Testing to be carried out after completion,

S&F Al strip of size 25 x 3.15 mm buried in ground / fix with saddle and screws etc, for roof and on wall as earth continuity conductor, complete all as specified and as directed.

M & L stay assembly complete with accessories as shown in electrical plate No 1 ( Loop type insulator,stay clamps,excavation and concrete only measured separately) using diameter of stay rod 16 mm and MS stay plate 230mm x 230mm including taking down , complete all as specified and directed.

M & L galvanised stay strand size 7/4 mm complete all as directed incl taking down the old unserviceable stay wire.

M & L Reel type insulator, vitreous white,brown or green insulator small size,with over all dimensions 65mm dia x 31mm high x 20mm hole , complete all as specified and directed.

S&F Air Termination, single pointed copper rod 12 mm dia and 300 mm long complete fixed with brazing , complete all as specified and directed.

S & F Test point terminal block made of gun metal or Phosphorus bronze size 75 x 75 x 25 mm, drilled and screwed including 3 Nos 8 mm dia 25 mm long hex head screw, complete all as specified and as directed.

M&L ACSR any size from poles including stringing on LT poles complete incl aluminium binding wires, jumpering, bindings at insulators etc, complete all as specified and directed.

Replacement of clamps made out of made out of 40x6 mm bending to shape, drilling holes for bolts suitable for fixing GI pipe bracket to steel pole, made in two halves, including nuts, bolts, washers and painting with two coats of aluminium paint over a coat of red oxide primer, complete all as specified and directed.

M & L for Painting of steel tubular pole 9.0 mtr long, by applying one coat of alluminium paint after scraping / brushing and cleaning the rust on pole and cross arms . Alluminium painting will be done on pole above 1.5 Mtr hight from ground level and balance 1.5 mtr from ground level will be painted by alternate layer of black and white enammelled paint ( 30 cms each) Pole Nos will be written on pole by black paint in yellow circle of 150mm dia, complete all as specified and directed.

Refixing of ACSR any size from poles including stringing on LT poles complete incl aluminium binding wires, jumpering, bindings at insulators etc, complete all as specified and directed.

Refixing of stay assembly complete with accessories as shown in electrical plate No 1 (Loop type insulator,stay clamps,excavation and concrete only measured separately) using diameter of stay rod 16 mm and MS stay plate 230mm x 230mm including taking down, complete all as specified and directed.

Supply and errection of steel tublar swaged poles complete with cast iron base plate,finial taper plug,bolts,nuts,screws as specified type 410SP-31 (9.0 mtr long) and shifting of conductors and insulators etc incl painting the exposed portion of the pole with two coats of aluminium paint over a coat of red oxide primer and interally through out plus embedded portion with two coats of black bituminous paint over a coat of red oxide primer, complete all as specified and directed.

Supply & lay GI tubing light grade in protection of cable at road crossing /hard standing/pole protection fixed with clamps as per site requirement etc of size 40 mm dia bore, complete all as specified and directed .

S&F 3 layered (Outer Green Coloured UV Stabalized, Middle Black Coloured UV Stabalized and Inner Most Layer White Coloured with Antimicrobial Property) PP-R (Polypropyelene Random Copolymer) Pipe 50 mm Outer dia, ISI marked, SDR 7.4 and SDR 11 UV Stabalised and Antimicrobial Fusion Welded having Thermal Stabality for Hot and Cold Water Supply all PP-R Plain and Brass Threaded Polypropyelene Random Fittings and laid in Trenches, complete all as specified and as directed.

S&F 3 layered (Outer Green Coloured UV Stabalized, Middle Black Coloured UV Stabalized and Inner Most Layer White Coloured with Antimicrobial Property) PP-R (Polypropyelene Random Copolymer) Pipe 32mm Outer dia, ISI marked, SDR 7.4 and SDR 11 UV Stabalised and Antimicrobial Fusion Welded having Thermal Stabality for Hot and Cold Water Supply all PP-R Plain and Brass Threaded Polypropyelene Random Fittings and laid in Trenches, complete all as specified and as directed.

S&F PP-R Gate Valves (Brass Insert) 50 mm Outer dia and fixed including taking down of existing unserviceable One, complete all as specified and directed.

Cutting of existing CI/DI pipe laid 80 mm dia for inserting Tees for new connection of 80 mm x 63 mm dia, complete all as specified and directed.

M&L for connection pieces for inserting 63 mm PPR pipe into 80 mm distribution mains , complete all as specified and directed.

Making connection of PP-R distribution branch with PP-R main of 63 mm size by providing and fixing tee of 50 mm x 32 mm including cutting and making fusion joint etc, complete all as specified and directed.

PPR gate valve (brass inserted) as per site requirement of size for 32 mm dia pipe complete all as specified and directed.

RC Madan

M/S Krishna Construction Co.

M/S K.K.TRADERS

M/S B.N. Prasad