SPECIAL REPAIR TO BLDG NO 20 FAMILY WARD AT MH RANIKHET UNDER GE RANIKHET

Amount

BOQ ( Sch 'A') B/R items Dismantling plain or corrugated steel sheeting, any thickness including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall , fixed with self tapping screw complete all as specified and directed

S&F Pre painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall , fixed with self tapping screw complete all as specified and directed.

Dismantling of timber scantling 40 Sqcm and over in section in any position as in framed work complete all as specified and directed.

Dismantling of boarding, any description, fixed in any position with nails complete all as specified and directed.

M&L for 2nd class hard wood as in scantling clean sawn as in floor of any description in framed work complete all as specified and directed.

S&F 20mm thick 2nd class soft wood (Chir) boarding planned one side fixed with butt joints with nails in any situation/ position except flooring and skirting complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.50 mm graded stone aggregate as in padding concrete/covings/roof kerbs complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or PCC blocks or stone wall or concrete surface etc including racking out joints, hacking for keys, scrubbing down with water etc all complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on fair faces of brick work, finishing the surfaces fair and even complete all as specified and directed.

M&L for 15 mm thick rendering CM (1:4) mixed with WPC @ 3% by weight of cement finished even and smooth as in vertical surfaces complete all as specified and directed. (NOTE- WPC shall be measured and paid seperately)

M&L for applying two coats of cement base paint over a coat of primer on newly plastered surfaces of walls including preparation of surfaces complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls & applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for applying a layer of JK/ Birla putty on wall surfaces including cornics etc for proper levelling of plaster and two coats of oil bound distemper over a coat of chalk whitening new surface complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls including cornices etc and applying one coat of oil bound distemper complete all as specified and directed.

M&L for applying Acrylic Smooth exterior paint of required shade (New work/old work) with two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and directed.

M&L for preparation of new or previously untreated wooden surfaces of any description,not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Taking down chowkats or frames exc 1.5 Sqm but not exc 4 Sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

All as per item No 18 above but area not exc 1.50 Sqm each complete all as specified and directed.

Taking down shutter only area exc. 1.00 sqm & n.exc. 2.00 sqm complete all as specified and directed.

S&F 2nd class hard wood (SAL) plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints and fixed to any position complete all as specified and directed.

S&F 30 mm thick flush shutter solid core construction with block board and ply wood face commercial type complete all as specified and directed.

S&F 35mm thick IInd class hard wood glazed and skelton shutters open rebated and prepared to receive glass, guage etc, without sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass, guage etc, size of members of shutters as specified in MES SSR Part-I, Section 8, Clause 8.24 (a) complete all as specified and directed.

S&F 30mm thick IInd class hard wood glazed and skelton shutters open rebated but divided into squares with plain chamfered or rounded mitred and sash barsand prepared to receive glass, guage etc, with out sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass, guage etc, if window, ventilators etc are provided with stiles and rails as specified size of members of shutters as specified in MES SSR Part-I, Section 8, Clause 8.24 (b) complete all as specified and directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

S&F aluminium partition powder coated of frame of aluminium section 44.45X44.45X1.6mm etc and 5mm thick sunbroken glass fixed with gasket with aluminium clip, jointing clips, glazing clips, rubber packing, screws etc and as directed at site including taking down old unserviceable wooden partition complete all as specified and directed

S&F aluminium powder coated door with shutter and frame of aluminium section sliding type as per following specifications with and including round type aluminium handle, tower bolts, hinges, panes etc and as directed at site:- (a) DOOR FRAME : 100 x 44 x1.6 mm section for complete frame. (b) DOOR SHUTTER : Top & bottom rail of 100x44x1.6 mm, middle rail of 83 x 44 x 1.6mm, both styles of 83 x 44 x 1.6 mm size shall be used. (c) GLASS PANE : 5mm thick sun broken glass fixed with gasket with aluminium clip , jointing clips, glazing clips, rubber packing, screws etc. (d) Jointing cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as 100mm long 03 Nos. hinges, aluminium handles , aluminium tower bolts ,and mortice lock 6 Levers etc complete all as specified and directed

S&F Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1500 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames, glazed with putty or fixed with beads including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane complete all as specified and directed.

S&F in repairs of galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

S&F 100 mm size aluminium handle plate type anodised complete all as specified and directed.

S&F 100mm size MS butt hinges, medium weight, cold rolled and fixed complete all as specified and directed.

S&F 75mm size MS butt hinges, medium weight, cold rolled and fixed complete all as specified and directed.

S&F 150mm long Aluminium tower bolt and fixed complete all as specified and directed.

S&F 100mm long Aluminium tower bolt and fixed complete all as specified and directed.

S&F 250mm long Aluminium sliding door bolt, bolt type with bright bolt not less than 12mm dia with and including a minimum of 6 bolt and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

Taking up or down 15mm dia steel tubing and connections by disconnecting fittings/tubing from existing tubing were required including removal from site complete all as specified and directed.

Taking up or down 20mm dia steel tubing and connections by disconnecting fittings/tubing from existing tubing were required including removal from site complete all as specified and directed.

M&L for 15mm bore GI tubing, medium grade, galvanised with and including all GI fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

Cutting chases, for water tubing or concealed , etc, and making good to facings where required and plastering in cement mortar (1:4) and finishing the surface to match with existing surfaces, cutting not exceeding 10cm girth in brick walls complete all as specified and directed.

M&L for 20 mm bore GI tubing, medium grade, galvanised with and including all GI fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F in repair 15mm dia bib tap long body CP, screwed for iron pipes complete all as specified and directed

S&F angle cock 15 mm bore brass chromium plated, screwed both ends for pipes or for unions fixed in repairs including making good to match with existing surface, complete all as specified and directed.

S&F in repairs pillar taps 15 mm bore, Brass chromium plated , screwed down high pressure with or without letter HOT or COLD with long screwed shanks and fly nut complete all as specified and directed.

S&F in repairs polymer white (polypropeylene Delrin and ABS) low level flushing cistern white 10 Ltrs capacity, valveless, syphonic action type complete with inlet, ball valve float valve, bends brackets, rawl plug, brass screws handle etc complete, complete all as specified and directed.

S&F in repairs, 550x400mm vitreous China, wash hand basin , flat back with pedestal excluding trap and waste chain and plug and porcelain stopper including sutaible size brackets waste pipe and waste coupling complete all as specified and directed.

S&F vitreous china squatting pan Orrissa pattern size 580 x 440 mm white with intregal foot rests, with & including P or S trap (excluding material & labour of flushing cistern and flush pipe) including conection to trap and to flush pipe etc complete including making good to floor complete all as specified and directed fixed in repairs.

Dismantling water tanks 500 ltrs capacity complete all as specified and directed.

Dismantling water tanks of any description, capacity exceeding 500 litres but not exceeding 1000 liters complete all as specified and directed.

S&F rotational moulded polythene water storage tanks, three layered of any colour (cylindrical vertical with closed top) hoisted and fixed in postion 500 ltrs capacity and including 20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gram complete all as specified and directed.

S&F Green Colour rotational moulded polyethylene water storage tanks three layered, (Cylindrical vertical with closed top) hoisted and fixed in position, 1000 liters capacity complete all as specified and directed.

S&F in repairs 20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gram complete all as specified and directed.

Demolition of brick work or stone masonry or precast PCC block walling built in cement mortar complete all as specified and directed.

M&L for brick work with sub class 'B' bricks using old size bricks straight or curved on plan exc 6 mtr mean radius, built in CM 1:6 complete all as specified and directed.

S&F in repairs Hot & cold mixer CP with long swan neck for WHB complete all as spd complete all as specified and directed.

BOQ ( Sch 'A') E/M items Taking down carefully aluminium/copper wiring of any size (for light, fan, socket or power etc complete) ( fittings such as switches, sockets, ceiling roses, pendent holders regulators, tube lights etc to be measured and paid separately) and making good disturbed surfaces of wall, roof etc to match with existing surface complete all as specified and directed.

S & F point wiring for one light point / fan point / bell point / 5 Ampere socket outlet point (independent point), controlled by one, one way switch with 1.50 sqmm size PVC insulated unsheathed 1100 volts grade single core (multi-stranded) copper conductor cable (FRLS) drawn into and including medium grade PVC conduit concealed (not less than 20 mm dia) all necessary fittings and accessories fixed concealed (including chase cutting in brick/stone masonery wall for fixing conduit and plastering the external surfaces and matching the same with existing suface) and sunk cast iron or pressed steel terminal boxes for mounting fitting like switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated bakelite sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.50 sqmm size FRLS copper conductor cable (multi stranded) as in earth wire and connected to common earth dolly complete all as specified and directed :- (a) One light/one fan/one bell point controlled by one, one way switch.

All as per item No 60 above but one socket outlet 5 pin 5 Amp controlled by one, one way switch on same board complete all as specified and directed.

All as per item No 60 above but one socket outlet 5 pin 5 Amp controlled by one, one way switch on independent board complete all as specified and directed.

All as per item No. 60 above but wiring with using cable 2.50 sqmm size multi stranded copper wire (FRLS) and earth wire of PVC insulated (Green colour) 2.50 Sqmm size FRLS multi stranded copper wire for one 6 pin socket outlet, 16 Amperes on independent board complete all as specified and directed.

S&F switch piano flush type single pole, one way 5 Amp complete all as specified and directed.

S&F socket out let multi 5 pin, 5 Amps, flush type complete all as specified and directed.

S&F switch piano flush type single pole, one way 15 Amp complete all as specified and directed.

S&F socket out let 2 in1,3 pin, 5 and 15 Amp, flush type complete all as specified and directed.

S&F ceiling rose, PVC/ Poly carbonate,isolated body three terminal complete all as specified and directed.

S & F lamp holder angle type PVC/Poly carbonate type insulated body with back plate suitable for batten/wall fitting complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder includingLED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & directed.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified & directed.

Taking down unservicable MCB and S&F MCB SPN , 240 volts,AC B curve, 10 KA 40 Amps complete all as specified & directed.

Taking down unservicable MCB and S&F MCB DP , 240 volts,AC C curve, 10 KA 40 Amps complete all as specified & directed.

Taking down unserviceable MCB S & F MCB TPN , 415 volts, AC C curve, 10 KA 100 Amps complete all as specified & directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed .

Taking down unservicable DB and S&F sheet metal enclusure for DBs(double door type) single pole and neutral 12 way including blanking platge as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed .

Taking down unservicable DB and S&F sheet metal enclusure for DBs(double door type) single pole and neutral 8 way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed .

Taking down unserviceable main switches MCB DB & S&F sheet metal enclusure for DBs(double door type) Triple pole and neutral 4way including blanking plate as required with 200 Amps rated bus bar, 415 volts fixed complete all as specified and directed .

Taking out old unserviceable Sub main wiring for replacement including S&F sub main wiring with two single core FRLS PVC insulated and sheathed 1100 Volts grade, 6 Sqmm size cables, PVC insulated stranded copper conductor fixed and including PVC conduite pipe 25mm dia with all accessories and one continuous run of 6.0 Sqmm copper conductor PVC complete all as specified and directed Note:- Two single core cables along with earth wire and conduit shall be measured as one unit length).

M&L for earthing complete with galvanised steel, earth plate electrode 600x600mm x 6mm thick burried directly in ground verticaly (earth pit not less than 2.25 mtrs below ground level ) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron/steel all as shown in electrical plate No 3 on page 497 of MES schedule 2009 part - I connected to main switch board/main DBs/earthing test point including all necessary excavation and earth work in hard/dense soil common salt and charcoal dust mixed and packed 150mm thick all round the GI earth plate, watering pipe 20mm dia GI medium grade. GI sheet 0.63 mm thick funnel, wire gauge, 50mm thick RCC cover in PCC 1:2:4 type B1 duly reinforced with MS round bars 6mm dia @ 150c/c both ways and pit/chamber in PCC 1:3:6 type C1 with suitable lifting handle to cover, GI protection pipe 15mm dia light grade up to 7.5mtr from electrode GI pipe to be fixed with complete all as specified and directed. Note :- (i) Earth lead beyond 7.5 mtr from electrode to earth terminal point/main switch & GI pipe light grade 15mm dia for protection against mechanical damage to lead shall be measured separately. (ii) On testing after completion if desired earth resistance is not obtained, the earthing will be redone at no extra cost by the contractor.

S& F LED Bulb of 9 watt with minimum 5 years warrantee complete all as specified & directed.

S&F Exhaust fan metallic bady ISI mark, 300 mm size with louvers including cutting openings, through brick/ stone wall , making of holes and grouting of suitable size of nuts and bolts for 300 mm exhaust fan and making good dismantled portion and making connection with wire of suitable size and connecting accesssories complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25.0 sq mm 4 core complete all as specified & directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep for laying of underground cable and getting out in any type of soil complete all as specified & directed.

Returning, fillingin, including spreading, leveling watering and well ramming in layers n.exc 25 cms. thick in any type soil complete all as specified and directed

Removal of surplus soil to a distance not exceeding 50 Mtr and depositing where directs at a level not exceeding 1.5 Mtr above the starting point complete all as specified and directed.

M&L for sand cushioning in trenches spreading and consolidation 8cm thick before laying the cable & 15 cm of sand after laying the cable complete all as specified Note: Punned thickness of sand shall be measured and paid

M&L for laying of bricks well burnt sub class ‘B’ (old size) laid flat for cable protection width equal to the lengrth of brick complete all as specified and directed.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified & directed.

Supply and fixing LED security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed .

S & F Recess mounting LED luminaire 600mm x 600 mm ,36 W, 220V, with high efficiency PMMA diffuser soft glare free light suitable for recessed mounting ,with powder coated CRCA housing with LEDs, seamless front frame complete with driver and all accessories internally pre-wired and including necessary cutting as required in panel and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

Supply and fixing LED batten light fitting 20W, 220V,with microwave motion sensor based technology with aluminium housing & integrated electronic driver of make Havells with Cat part No LUMILINESMART20WLED865PCWH or equivalent approved make of Bajaj, Philips, Wipro, Eveready complete all as specified & directed.

M/s RN Kharwar & Sons

aditya construction

Builders Harpal

M/S NAYAL ELECTRICALS

SS Construction Co