New Construction of CHC Building, with P.M. Room,Compound Wall ,CC Road & Bore at Village Sagbara , Ta.Sagbara, Dist.Narmada

NAME OF WORK: - Construction of C.H.C. Building with P.M. Room, Compound Wall, C.C. Road & Bore at Village.: Sagbara Ta: Sagbara Dist. -

Item Tendered Rates

Quantity Description of Work Per Amount (Rs.)

1 3 4 In Figs In words 6

Excavation for foundation upto 1.5 m depth including sorting out and stacking of

Rupees One Hundred Seventy

1 1445.00 useful materials and disposing off the excavated stuff upto 50 Meter lead. Hard Rock 170.74 CMT

Paise SeventyFour Only

and any type of Soil

Excavation for foundation for depth from 1.5m to 3.0 m including sorting out and Rupees One Hundred

2 1050.00 stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead. 191.65 NinetyOne Paise SixtyFive CMT

Hard Rock and any type of Soil Only

Excavation for foundation for depth from 3.0 m to 5.0 m including sorting out and Rupees Four Hundred

3 34.00 stacking of useful materials and disposing off the excavated stuff upto 50 Meter 428.59 TwentyEight Paise FiftyNine CMT

lead.(E) Hard Rock Only

Filling available excavated earth (excluding rock) in trenches. plinth, sides of

Rupees EightyEight Paise

4 2045.00 foundations etc. in layers not exceeding 20 cm. in depth consolidating each disposited 88.86 CMT

layer by ramming and watering.

Boring holes 3.5 m deep in ordinary soil (for cast in situ piles) and getting out the soil Rupees Eight Hundred

5 12.00 and disposal of the surplus excavated soil as directed within a lead of 50 Meter for 846.73 FourtySix Paise SeventyThree CMT

following diameter of pipes.(ii) 250 mm Only

Providing and laying controlled cement concrete M.150 for curing complete Rupees Three Thousand Six

6 191.00 excluding cost of formwork and reinforcement for reinforced concrete work in Grade 3652.97 Hundred FiftyTwo Paise CMT

slab NinetySeven Only

Filling in foundation and plinth with Murrum or selected soil brought from outside of

Rupees Two Hundred

7 2315.00 the site of work from local or 5 km in layers of 20cm. Thickness including watering, 217.70 CMT

Seventeen Paise Seventy Only

raming and consolidating etc.complete.

Providing and laying cement concrete 1:2:4 (1-Cement : 2- Coarse sand : 4- graded Rupees Three Thousand Four

8 423.00 stoneaggregates 20 mm nominal size) and curing complete excluding cost of 3481.87 Hundred EightyOne Paise CMT

formwork in (A) Foundation and Plinth EightySeven Only

Providing and laying controlled cement concrete M.250 and curing complete Rupees Four Thousand One

9 5.00 excluding the cost of formwork and reinforcement for reinforced concrete work in 4168.93 Hundred SixtyEight Paise CMT

AUGER NinetyThree Only

Providing and laying controlled cement concrete M.250 and curing complete

Rupees Four Thousand Three

Including the cost of formwork but excluding reinforcement for reinforced concrete

10 294.92 4324.82 Hundred TwentyFour Paise CMT

work in (A) Foundations, footings, Base of columns and Mass concrete.

Providing and laying controlled cement concrete M.250 and curing complete

Rupees Six Thousand Four

including the cost of formwork nut excluding reinforcement for reinforced concrete

11 75.00 6444.81 Hundred FourtyFour Paise CMT

work in (D) Columns, Pillars posts and struts. COLUMN - UP TO PLINTH TOP

Providing and laying controlled cement concrete M.250 and curing complete

Rupees Six Thousand Two

including the cost of formwork nut excluding reinforcement for reinforced concrete

12 120.00 6295.33 Hundred NinetyFive Paise CMT

work in (D) Columns, Pillars posts and struts. COLUMN AT GROUND FLOOR

ThirtyThree Only

Providing and laying controlled cement concrete M.250 and curing complete

Rupees Six Thousand Three

including the cost of formwork nut excluding reinforcement for reinforced concrete

13 87.00 6331.69 Hundred ThirtyOne Paise CMT

work in (D) Columns, Pillars posts and struts. COLUMN AT FIRST FLOOR

Providing and laying controlled cement concrete M.250 and curing complete

Rupees Six Thousand Three

including the cost of formwork nut excluding reinforcement for reinforced concrete

14 19.00 6368.05 Hundred SixtyEight Paise Five CMT

work in (D) Columns, Pillars posts and struts. COLUMN AT TERRACE & STAIR CABIN

Providing and laying controlled cement concrete M.250 and curing complete

Rupees Six Thousand Four

including the cost of formwork nut excluding reinforcement for reinforced concrete

15 4.00 6404.41 Hundred Four Paise CMT

work in (D) Columns, Pillars posts and struts. COLUMN AT LIFT MACHINE ROOM

Providing and laying controlled cement concrete M.250 and curing complete

including the cost of formwork but excluding reinforcement for reinforced concrete Rupees Five Thousand Five

16 129.00 work in (C) Slabs, landing, shelves, Balconies, Lintels, Beams, Girders and Cantilever 5512.58 Hundred Twelve Paise CMT

upto floor two level. BEAMS - (A) GROUND BEAM/PLINTH BEAM FiftyEight Only

Providing and laying controlled cement concrete M.250 and curing complete

Rupees Five Thousand Three

including the cost of formwork but excluding reinforcement for reinforced concrete

17 76.00 5371.18 Hundred SeventyOne Paise CMT

work in (C) Slabs, landing, shelves, Balconies, Lintels, Beams, Girders and Cantilever

upto floor two level. BEAMS- FIRST SLAB BEAM

Providing and laying controlled cement concrete M.250 and curing complete

Rupees Five Thousand Four

including the cost of formwork but excluding reinforcement for reinforced concrete

18 76.00 5407.54 Hundred Seven Paise CMT

work in (C) Slabs, landing, shelves, Balconies, Lintels, Beams, Girders and Cantilever

upto floor two level. BEAMS- TERRACE SLAB BEAM

Providing and laying controlled cement concrete M.250 and curing complete

Rupees Five Thousand Four

including the cost of formwork but excluding reinforcement for reinforced concrete

19 12.00 5443.90 Hundred FourtyThree Paise CMT

work in (C) Slabs, landing, shelves, Balconies, Lintels, Beams, Girders and Cantilever

upto floor two level. BEAMS- STAIR CABIN SLAB BEAM

Providing and laying controlled cement concrete M.250 and curing complete

Rupees Five Thousand Four

including the cost of formwork but excluding reinforcement for reinforced concrete

20 3.00 5480.26 Hundred Eighty Paise CMT

work in (C) Slabs, landing, shelves, Balconies, Lintels, Beams, Girders and Cantilever

upto floor two level. BEAMS-LMR SLAB BEAM

Providing and laying controlled cement concrete M.200 and curing complete

Rupees Four Thousand Eight

including the cost of formwork but excluding reinforcement for reinforced concrete

21 151.00 4881.33 Hundred EightyOne Paise CMT

work in (C) Slabs, landing, shelves, Balconies, Lintels, Beams, Girders and Cantilever

ThirtyThree Only

upto floor two level. SLAB- FIRST SLAB & CANOPY SLAB

Providing and laying controlled cement concrete M.200 and curing complete

Rupees Five Thousand One

including the cost of formwork but excluding reinforcement for reinforced concrete

22 132.00 5152.01 Hundred FiftyTwo Paise One CMT

work in (C) Slabs, landing, shelves, Balconies, Lintels, Beams, Girders and Cantilever

upto floor two level. SLAB- TERRACEY SLAB

Providing and laying controlled cement concrete M.200 and curing complete

Rupees Five Thousand Four

including the cost of formwork but excluding reinforcement for reinforced concrete

23 10.00 5422.69 Hundred TwentyTwo Paise CMT

work in (C) Slabs, landing, shelves, Balconies, Lintels, Beams, Girders and Cantilever

upto floor two level. SLAB-STAIR CABIN SLAB

Providing and laying controlled cement concrete M.200 and curing complete

Rupees Five Thousand Six

including the cost of formwork but excluding reinforcement for reinforced concrete

24 6.00 5693.37 Hundred NinetyThree Paise CMT

work in (C) Slabs, landing, shelves, Balconies, Lintels, Beams, Girders and Cantilever

ThirtySeven Only

upto floor two level. SLAB-LMR SLAB

Providing and laying controlled cement concrete M.200 and curing complete

Rupees Four Thousand Nine

including the cost of formwork but excluding reinforcement for reinforced concrete

25 8.00 4915.67 Hundred Fifteen Paise CMT

work in (C) Slabs, landing, shelves, Balconies, Lintels, Beams, Girders and Cantilever

SixtySeven Only

upto floor two level. STAIRCASE-GROUND FLOOR

Providing and laying controlled cement concrete M.200 and curing complete

Rupees Four Thousand Nine

including the cost of formwork but excluding reinforcement for reinforced concrete

26 8.00 4952.03 Hundred FiftyTwo Paise CMT

work in (C) Slabs, landing, shelves, Balconies, Lintels, Beams, Girders and Cantilever

upto floor two level. STAIRCASE-FIRST FLOOR

Providing and laying controlled cement concrete M.250 and curing complete

Rupees Six Thousand Four

including the cost of formwork but excluding reinforcement for reinforced concrete

27 8.00 6421.58 Hundred TwentyOne Paise CMT

work in (B) Walls, from top of foundation level upto floor two level .PARDI - (A) UP

FiftyEight Only

Providing and laying controlled cement concrete M.200 and curing complete

Rupees Six Thousand Two

including the cost of formwork but excluding reinforcement for reinforced concrete

28 8.00 6279.17 Hundred SeventyNine Paise CMT

work in (B) Walls, from top of foundation level upto floor two level .PARDI-

Providing and laying controlled cement concrete M.200 and curing complete

Rupees Six Thousand Three

including the cost of formwork but excluding reinforcement for reinforced concrete

29 8.00 6315.94 Hundred Fifteen Paise CMT

work in (B) Walls, from top of foundation level upto floor two level .PARDI-FIRST

NinetyFour Only

Providing and laying controlled cement concrete M.200 and curing complete

Rupees Six Thousand Three

including the cost of formwork but excluding reinforcement for reinforced concrete

30 4.00 6352.72 Hundred FiftyTwo Paise CMT

work in (B) Walls, from top of foundation level upto floor two level .PARDI-

SeventyTwo Only

Providing and laying controlled cement concrete M.200 and curing complete

Rupees Six Thousand Two

including the cost of formwork but excluding reinforcement for reinforced concrete

31 19.00 6219.58 Hundred Nineteen Paise CMT

work in (C) Slabs, landing, shelves, Balconies, Lintels, Beams, Girders and

FiftyEight Only

Cantilever upto floor two level. LINTEL-GROUND FLOOR

Providing and laying controlled cement concrete M.200 and curing complete

Rupees Six Thousand Two

including the cost of formwork but excluding reinforcement for reinforced concrete

32 19.00 6255.94 Hundred FiftyFive Paise CMT

work in (C) Slabs, landing, shelves, Balconies, Lintels, Beams, Girders and

NinetyFour Only

Cantilever upto floor two level. LINTEL-FIRST FLOOR

Providing and laying controlled cement concrete M.200 and curing complete

including the cost of formwork but excluding reinforcement for reinforced concrete Rupees Six Thousand Two

33 1.00 work in (C) Slabs, landing, shelves, Balconies, Lintels, Beams, Girders and 6292.30 Hundred NinetyTwo Paise CMT

Cantilever upto floor two level. LINTEL-TERRACE/STAIR CABIN Thirty Only

Providing and laying controlled cement concrete M.200 and curing complete

including the cost of formwork but excluding reinforcement for reinforced concrete Rupees Six Thousand Three

34 1.00 work in (C) Slabs, landing, shelves, Balconies, Lintels, Beams, Girders and 6328.66 Hundred TwentyEight Paise CMT

Cantilever upto floor two level. LINTEL-LIFT MACHIN ROOM LEVEL SixtySix Only

Providing and laying controlled cement concrete M.200 and curing complete

Rupees Five Thousand Five

including the cost of formwork but excluding reinforcement for reinforced concrete

35 7.00 5530.76 Hundred Thirty Paise CMT

work in (C) Slabs, landing, shelves, Balconies, Lintels,Beams,Girders and Cantilever

SeventySix Only

upto floor two level. CHHAJJA-GROUND FLOOR

Providing and laying controlled cement concrete M.200 and curing complete

Rupees Five Thousand Five

including the cost of formwork but excluding reinforcement for reinforced concrete

36 7.00 5567.12 Hundred SixtySeven Paise CMT

work in (C) Slabs, landing, shelves, Balconies, Lintels,Beams,Girders and Cantilever

upto floor two level. CHHAJJA-FIRST FLOOR

Providing and laying controlled cement concrete M.200 and curing complete

Rupees Five Thousand Six

including the cost of formwork but excluding reinforcement for reinforced concrete

37 1.00 5603.48 Hundred Three Paise CMT

work in (C) Slabs, landing, shelves, Balconies, Lintels,Beams,Girders and Cantilever

FourtyEight Only

upto floor two level. CHHAJJA-TERRACE/STAIR CABIN

Providing and laying controlled cement concrete M.200 and curing complete

Rupees Five Thousand Six

including the cost of formwork but excluding reinforcement for reinforced concrete

38 1.00 5639.84 Hundred ThirtyNine Paise CMT

work in (C) Slabs, landing, shelves, Balconies, Lintels,Beams,Girders and Cantilever

EightyFour Only

upto floor two level. CHHAJJA-LIFT MACHIN ROOM LEVEL

Providing and laying controlled cement concrete M.200 and curing complete

including the cost of formwork but excluding cost of reinforcement for reinforced Rupees Five Thousand Three

39 17.00 concrete work in (C) Slabs, landing, shelves, Balconies Lintels, Beams, Girders and 5344.92 Hundred FourtyFour Paise CMT

Cantilever upto floor two level. COPING- UP TO PLINTH + GROUND FLOOR NinetyTwo Only

Providing and laying controlled cement concrete M.200 and curing complete

Rupees Five Thousand Three

including the cost of formwork but excluding cost of reinforcement for reinforced

40 17.00 5381.28 Hundred EightyOne Paise CMT

concrete work in (C) Slabs, landing, shelves, Balconies Lintels, Beams, Girders and

TwentyEight Only

Cantilever upto floor two level. COPING- FIRST FLOOR

Providing and laying controlled cement concrete M.200 and curing complete

Rupees Two Thousand Three

including the cost of formwork but excluding cost of reinforcement for reinforced

41 4.00 2387.64 Hundred EightySeven Paise CMT

concrete work in (C) Slabs, landing, shelves, Balconies Lintels, Beams, Girders and

Cantilever upto floor two level. COPING- TERRACE LEVEL

Providing and laying controlled cement concrete M.200 and curing complete

including the cost of formwork but excluding cost of reinforcement for reinforced

Rupees Five Thousand Four

42 1.00 concrete work in (C) Slabs, landing, shelves, Balconies Lintels, Beams, Girders and 5454.00 CMT

Hundred FiftyFour Only

Cantilever upto floor two level. COPING- STAIR CABIN LEVEL

Providing TMT Bar FE 500/500D reinforcement for R.C.C. work including bending,

Rupees SeventyTwo Paise

43 125887.00 binding and placing in position complete-UP TO PLINTH + GROUND FLOOR 72.43 kg

FourtyThree Only

Providing TMT Bar FE 500/500D reinforcement for R.C.C. work including bending, Rupees SeventyThree Paise

binding and placing in position complete-FIRST FLOOR Nine Only

Providing TMT Bar FE 500/500D reinforcement for R.C.C. work including bending,

Rupees SeventyThree Paise

45 8820.00 binding and placing in position complete-TERRACE / STAIR CABIN LEVEL 73.76 kg

SeventySix Only

Providing TMT Bar FE 500/500D reinforcement for R.C.C. work including bending,

Rupees SeventyFour Paise

46 70.00 binding and placing in position complete-LIFT MACHINE ROOM LEVEL 74.43 kg

FourtyThree Only

Brick work using common burnt clay building bricks having crushing strength not Rupees Two Thousand Eight

47 350.00 less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 - 2831.94 Hundred ThirtyOne Paise CMT

fine sand)(B) Conventional - UP TO PLINTH NinetyFour Only

Brick work using common burnt clay building bricks having crushing strength not

Rupees Three Thousand Ten

48 325.00 less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 - 3010.81 CMT

Paise EightyOne Only

fine sand)(B) Conventional - GROUND FLOOR

Brick work using common burnt clay building bricks having crushing strength not

Rupees Three Thousand

49 210.50 less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 - 3040.90 CMT

Fourty Paise Ninety Only

fine sand)(B) Conventional - FIRST FLOOR

Brick work using common burnt clay building bricks having crushing strength not Rupees Three Thousand

50 45.00 less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 - 3070.99 Seventy Paise NinetyNine CMT

fine sand)(B) Conventional - TERRACE/SC LEVEL Only

Brick work using common burnt clay building bricks having crushing strength not Rupees Three Thousand One

51 10.00 less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 - 3101.07 Hundred One Paise Seven CMT

fine sand)(B) Conventional - LMR LEVEL Only

(i) Half brick masonry in common brunt clay building bricks having crushing

Rupees Four Hundred Eight

52 4.00 strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse 408.85 SMT

Paise EightyFive Only

sand ) in foundation and plinth (B) Conventional - UP TO PLINTH

(i) Half brick masonry in common brunt clay building bricks having crushing Rupees Four Hundred

53 401.00 strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse 443.40 FourtyThree Paise Fourty SMT

sand ) in foundation and plinth (B) Conventional - GROUND FLOOR Only

(i) Half brick masonry in common brunt clay building bricks having crushing Rupees Four Hundred

54 410.00 strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse 447.90 FourtySeven Paise Ninety SMT

sand ) in foundation and plinth (B) Conventional - FIRST FLOOR Only

Providing and laying and fixing 50 mm thick expansion joint by hydro cell semi rigid Rupees One Thousand Seven

55 9.00 UV resistance with high performance laminated closed cell polythene foam joint filler 1759.67 Hundred FiftyNine Paise SMT

in sheet foam as directed, etc. complete. SixtySeven Only

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single

Rupees One Hundred

or half brick walls for interior plastering with finishing with a floating coat of neat

56 2610.00 143.49 FourtyThree Paise FourtyNine SMT

cement slurry. upto floor two level and finished even and smooth in (ii) Cement

mortar 1:4 (1-cement :4-sand) - GROUND FLOOR

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single

or half brick walls for interior plastering with finishing with a floating coat of neat Rupees One Hundred

cement slurry. upto floor two level and finished even and smooth in (ii) Cement FiftyEight Paise SixtySix Only

mortar 1:4 (1-cement :4-sand) - FIRST FLOOR

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single

Rupees One Hundred

or half brick walls for interior plastering with finishing with a floating coat of neat

58 116.00 173.83 SeventyThree Paise SMT

cement slurry. upto floor two level and finished even and smooth in (ii) Cement

EightyThree Only

mortar 1:4 (1-cement :4-sand) - TERRCAE/SC LEVEL

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single

or half brick walls for interior plastering with finishing with a floating coat of neat Rupees One Hundred

cement slurry. upto floor two level and finished even and smooth in (ii) Cement EightyNine Only

mortar 1:4 (1-cement :4-sand) - LMR LEVEL

Providing 10mm thick cement plaster in single coat on ceilings and sofits of stairs

Rupees One Hundred Paise

60 890.00 and finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) - 100.54 SMT

Providing 10mm thick cement plaster in single coat on ceilings and sofits of stairs Rupees One Hundred

61 850.00 and finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) - FIRST 114.43 Fourteen Paise FourtyThree kg

Providing 10mm thick cement plaster in single coat on ceilings and sofits of stairs Rupees One Hundred

62 19.00 and finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) - SC 128.33 TwentyEight Paise RMT

LEVEL ThirtyThree Only

Providing 10mm thick cement plaster in single coat on ceilings and sofits of stairs Rupees One Hundred

63 30.00 and finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) - LMR 142.23 FourtyTwo Paise Hact

LRVRL TwentyThree Only

20mm thick sand faced cement plaster on walls consisting of 12mm thick backing

coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-

Rupees Three Hundred Fifty

64 2905.00 cement : 1-sand) etc. complete.(All Floor) including Providing & applying single coat 359.52 SMT

Nine Paise FiftyTwo Only

of textured at external surface at all floor levels(All Floor) approved by EIC

Applying two coats of Birla or Asian acrylic Lapy (putty) & two coats of primer of

approved brand andmanfacture on new wall/ceilling surface to give an even shade Rupees FourtySeven Paise

incl. throughly brushing the surface free from morter dropping and other foreign EightyEight Only

matter and sand prepared smooth etc. comp. as directed.

Distempeing (Two coats) with oil bound washable distemper of approved brand and

manufacture and of required shade on wall/ceilling surfaces to give an even shade,

over and including a priming coat with distemper primer of approved brand and

manufacture after thoroughly brushing the surface free from mortar dropping and Rupees FourtySeven Paise

other foreign matter and also including preparing the surface even and sand papered NinetyThree Only

smooth. (Rate includes cost of colour, required scaffolding, watering, or any other

equipments required to given an even & good look)

ANTI BACTERIAL (Two coats) with oil bound washable paint of approved brand and

manufacture and of required shade on wall/ceilling surfaces to give an even shade,

over and including a priming coat with distemper primer of approved brand and

manufacture after thoroughly brushing the surface free from mortar dropping and Rupees SeventySix Paise

other foreign matter and also including preparing the surface even and sand papered TwentyOne Only

smooth. (Rate includes cost of colour, required scaffolding, watering, or any other

equipments required to given an even & good look)

Finishing wall with weather proof exterior emulsion paint on wall surface (two

coats) to give an required shape even shade after thoroughly brushing the surface to Rupees SeventySix Paise

remove all dirt, and remains of loose powdered materials.etc complete ThirtySix Only

Providing and fixing Chicken wire mesh jali 16 x 24 or approved size of 22 gauge at

junction of concrete and brick work / AAC Block work or between different materials

after making "V" grove between two different material surface and filled with rich

69 560.00 150.00 Rupees One Hundred Fifty SMT

cement mortar, nailing etc complete for all floor, any height, all shape etc complete As

per drawings and design supplied by architect and instruction given by authority and

Providing throating or plaster drip and moulding to R.C.C. Chajja etc.comp Rupees TwentySeven Paise

ThirtyThree Only

Providing cement vata (10 cm x 10 cm size) quarter round in cement mortar 1 :1 Rupees Nineteen Paise

including neat cement finishing watering etc. complete. FiftyOne Only

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of

cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing

Rupees One Thousand

72 1269.00 flooring by adhesive material including dismentaling of existing flooring and jointed 1062.86 SMT

SixtyTwo Paise EightySix Only

with color cement slurry including finised with flush pointing & cleaning the surface

etc. complete for antiskit

Providing and laying chequered terrazo tiles 22mm thick with marble chips of sizes

upto 6mm in floors on 25mm thick bed of Lime mortar 1:1.5 (1-Lime putty :

Rupees Four Hundred

coarse sand) or C.M. 1:6 (1 - cement : 6 - coarse sand) jointed with neat cement slurry

73 145.00 488.89 EightyEight Paise EightyNine SMT

mixed with pigment to match the shade of the tiles including rubbing and polishing

complete. (B) Dark shades using ordinary cement

Providing and laying Ceramic tiles 6mm thick in flooring treads of steps and landing Rupees Six Hundred

74 117.00 laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing 638.42 ThirtyEight Paise FourtyTwo SMT

with flush pointing in white cement. Only

Providing and laying P & L 24" x 24" vitrified 8 mm thick in skrting risers of steps and

dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with Rupees Nine Hundred Thirty

white cement slurry and ( Including admiture Chemical for Bonding Tiles and wall) One Only

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick

base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5

Rupees Six Hundred FiftyOne

76 550.00 -coarse sand) laid over and jointed with grey cement slurry mixed with pigment to 651.15 SMT

Paise Fifteen Only

match the shade of slabincluding rubbing and polishing etc. complete. (A) 25mm

Providing and laying polished kota stone slab 25mm thick in risers of steps,skirting

Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-Cement : 3 coarse sand) Rupees Seven Hundred

77 177.00 and jointed with gray cement slury mixed with pigment to match the shade of slab 747.65 FourtySeven Paise SixtyFive SMT

including rubbing and polishing etc. complete. Only

Providing and fixing in Door, window sills and jambs M/C cut Black Granite 18 mm

thick of approved shade and size laid over a bed of C:M 1:6 including cement floating, Rupees One Thousand

curing, rubbing, polishing, cleaning, normal moulding on each side etc. complete and Nineteen Paise Seven Only

joints with white cement. 25mm Thick

Providing and fixing 35 mm thick solid core flush door Shutter of approved make

both side lamination using 1mm thick approved laminate sheets with 6mm thk

Lipping/border patti around flush hutter including fixing SS hinges, 6 no. - hold

fast of size 40 x6mm flat 300 mm long, wedges, keys, nails, catch screw, lever

Rupees Two Thousand Five

latches , handle(10 cm), aldrop(20 cms), stoppers(20 cms), etc and cutting/ drilling

79 152.00 2522.98 Hundred TwentyTwo Paise SMT

of necessary holes in masonry/ concrete and grouting of holdfasts with (1:2:4)

NinetyEight Only

cement concrete all as per drawing, specification and direction of the Engineer, all

materials, tools,plant and labour complete c. (All fixtures & fittings shall be

stainless steel of approved quality).approved by architect/Engineer Incharge.

Providing and fixing FRP frame size 100 x 50 mm and 28 mm thick FRP shutter with

depressed panel SHUTTER having extra reinforcement on sides and edges and in GEL

coat finish. The core of shutter is to be filled upwith injected fiber extinguishing

Rupees Three Thousand

grade polyurethane foam done in situ along with embedded wooden pieces for

80 47.00 3315.83 Three Hundred Fifteen Paise SMT

stiffening and also for taking hinges and fixtures. The whole FRP frame and shutter is

EightyThree Only

to be water proof, weatherproof, termite proof and resistance to mild acid / Alkali

resistance including S.S. hinges with necessary screws and aluminum fixtures and

Providing and fixing window having extruded aluminum Colour Powder Coated

section frame main outer size 95mm x 24mm x 1.17mm @ wt.of 0.738 Kg/mt,

horizontal Three track member size 92mm x 31.75mm x 1.30mm @ Wt.1.07 Kg/mt,

vertical member of size 92mm x 31.75mm x 1.50mm ,@ Wt. 1.06 Kg/mt with sliding

Rupees Two Thousand Eight

shutters of horizontal member size 40 mmx18mm x1.29mm @ wt.of 0.456 Kg/mt,

81 120.00 2878.44 Hundred SeventyEight Paise SMT

vertical member of size 40mm x 18mm x 1.29 mm @ wt.of 0.456Kg/mt with 5 mm

FourtyFour Only

thick transparent bronze colour tinted float glass with powder coated aluminum

fittings. 1shutter G.I Mosquito net Jali and fixtures and transparent silicon sealant

glass fixing to frame as per details etc

Providing and fixing standared extruded of alluminium section of size 63mm x

Rupees One Thousand Three

38.10mm x 1.2mm (Jindal Section :2434, @ Wt. 0.643 Kg/mt) with colour anodized

82 14.00 1387.18 Hundred EightySeven Paise SMT

alluminium frame for ventilation with 5 mm thick frosted glass as details etc

complete for Ventilation

Providing & fixing M.S. Grills of required members like angle, tee, flat patti, round /

square bar, square / round pipe of required size as per detail drawing & design incl.

cutting, welding, jointing & fixing in line & level as instructed by engineer in charge, Rupees SeventyOne Paise

iincluding oil painting with one coat of primer of approved quality and brand & two SeventyOne Only

coats of synthetic enamel oil paint etc. complete as per detail drawing and as directed

by Engineer in charge.(B) Plain grill

Providing and laying average 18-20mm thick double coat water proof smooth/ wired

finish cement plaster (For terrace) , 12 to 15mm thick first coat in CM 1:3 (1 cement :

3 coarse sand) by spraying, second coat of 6mm of CM 1:3 (1 cement : 3 fine sand)

and mixing non shrinkage compensating waterproofing admixture (Add 330 grams of

one pouch with 1 bag of 50 kg of cement Bag-As per manufracurers specifications) in

both coats including finishing with a flooting coat of neat cement slurry etc complete

for all floor. and shall be guaranteed for minimum period of 10 years after handing

over the completed building by the main contractor to be finished as directed. Stamp Rupees One Hundred Ten

paper guarantee 10 years to be furnished before receiving any payment from the Only

client. Waterproofing powder and liquid of approved make recommended

proportions is to be applied before each coat and final finishing coat. (Item shall be

operated for water retaining structures, sunks, basement walls and other places

specified As per drawings and design supplied by architect and instruction given by

authority and E.I.C. (For Sunk layer). approved make: sunanda/ fosroc/ BASF/

Carring out plinth treatment to post construction / existing structure by spraying

chemical solution for termite control treatment including labour and material

consistment with I.S.I specification. Using Chlordene andChiorpurfiles 20 EC. As Per

Rupees TwentyTwo Paise

85 770.00 6131_paret-II Consentration Weight one percent is recommended i.e one litre 20 EC 22.91 SMT

chemical emulsion with 19 liter give 1 % concrentration inclusive of one litre

chemical emulsion appication at the rate of 5 Litre chemical / Sqm of surface is

recommended as per I.S

Steel work, welded in built up sections framed work including cutting, hoisting,

fixing in position and applying a priming coat of read lead paint. (A) In beams and

Rupees Six Thousand Three

joists, channels angles Tees, flats, with connecting plates or angle cleats as in main

86 25.00 6378.91 Hundred SeventyEight Paise Qtl.

and cross beams. Hip and jack rafters, purlins conneted to common rafters and the

like. (upto 10 ton).including applying a priming coat of red lead paint and two coats

of oil painting etc complete

Providing & fixing S.S. Pipe railing of 50mm dia pipe in 3 rows supported by S.S. pipe

Rupees One Thousand Five

of 75mm size at every corners & 1.5 mt C/C incl. concrete block (0.35 X 0.35 X 0.35)

87 143.00 1576.57 Hundred SeventySix Paise RMT

using required cutting, jointing, welding, threading, drilling & fixing etc. comp. as

FiftySeven Only

directed as per drawing.

Providing and laying integral cement based water proofing treatment including

preparation of surface as required for treatment of roofs, balconies, terraces etc.

consisting of following operations.(a) Applying and grouting a slurry coat of neat

cement using 2.75 kg/ sqm of cement admixed with proprietary water proofing

compound conforming to IS : 2645 over the R.C.C. slab including cleaing the surface

before treatment.(b) Laying cement conctrete using broken bricks\brick bats 25 mm

to 100 mm size with 50 % of cement motar 1:5 ( 1 Cement : 5 Coarse sand ) admixed

with proprietory water proofing compound confiroming to IS : 2645 over 20 mm

thick layer of cemnt mortar of mix 1: 5 (1 cement : 5 Coarse sand ) admixed with

proprietary water proofing compound confirming to IS : 2645 to required slope adn

treating similarly the adjoining walls upto 300 m height inclusing rouding of juction

of walls and slabs.(C)After tow days of proper curing appling a second coat of cement

slurry admixed with proprietary water proofing compound I.S.2645 (d) Finishing the Rupees Five Hundred

88 951.00 surface with 20 mm thick jointless cement mortor of mix 1:4 admixed with 594.89 NinetyFour Paise EightyNine SMT

proprietary water proofing compound I.S.2645 and finishing the surface with trowel Only

with neat cement slurry & making of (300 x 300)mm square (e)The whole terrace so

finish shall be flooded with water for a min. period of two weeks for curing and for

final test. All above operation to be down in order and as directed and specified by

the engi.-in-charge. With average thickness of 120 mm and minmum thickness at

khurra as 65mm Cement consumption 0.642 Bags / S.M.) Providing and laying

broken chine mosaic flooring for terrace using 12 mm to 20 mm broken pieces of

glazed tiles to be laid over cement mortar 1:3 to plain or slope and to be tempered to

bring mortar creme out upto surface using white cement including rounding off

junctions and extending them upto 15 cm along the wall,clearing with water and

oxalic acid etc. as directed.

Providing and filling cinder in depressions of Bath and W.C. At all floor levels, after Rupees Eight Hundred

89 18.00 completing plumbing work of pans, pipes,traps etc.inlcuding watering and 845.37 FourtyFive Paise ThirtySeven CMT

consolidation etc complete as directed by Engineer in charge etc. comp.. Only

Supplying and fixing Board & Sinages with 3mm thick exterior grade ACP of

Rupees Two Thousand Five

90 7.00 Aludecore,Alstrong or Eurobond brand as per directed.[A] Main board [5.0 x 1.25mt.] 2525.00 SMT

Hundred TwentyFive Only

(With M.S. Frame)

S. S. Signages Providing & Fixing S. S. Plate Signages having size of 450 X 100 X 2 mm

Rupees One Thousand One

91 30.00 thick name plates of 304 grade mentioning names etc. as per image and directed by 1130.00 NOS

hundred Thirty Only

the Architect and approved by the Engineer in Charge.

Supplying and fixing Board with 3mm thick exterior grade ACP of Aludecore,Alstrong Rupees Two Thousand One

92 5.00 or Eurobond brand as per directed.[B] Platform & Advertising Board 2175.94 Hundred SeventyFive Paise SMT

NinetyFour Only

Supplying and fixing Sinages with with Vinyl letters [Non Reflective] with required

Rupees Two Hundred Twelve

93 450.00 anchoring fastners etc.complete as per directed.[C]Sinages [0.60x 0.30mt.] 212.10 NOS

Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles having

Tegular edge & 15 mm Thick Densified edges on the Tile Periphery for Extra Strength

The Light weight calcium silicate ceiling tiles shall have , light reflection 85% non-

combustible as per B.S. 476 part IV, 100% humidity resistance and also having

thermal conductivity0.043° w/m KC.for the best thermal Insulation . The Light

weight calcium Silicate tile shall be of approved texture Fine fissured/

Spintone/Cosmos having NRC value of 0.5 & Globe having NRC value of 0.75 NRC or

Rupees One Thousand One

equivalent of size 595 X 595 mm to be laid on true horizontal level suspended inter

94 820.00 1162.63 Hundred SixtyTwo Paise SMT

locking metal grid of hot dipped galvanized steel sections (galvanizing @120 grams

SixtyThree Only

per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to

get required length and size of 24X38mm made from 0.30 mm thick (minimum)

sheet, 1200mm centre to centre, and cross ‘T’ of size 24X28mm made out of 0.33mm

(Minimum) sheet spaced 1200mm along spaced between main ‘T’ at 600mm centre

to centre to form agrid of 1200X600mm and secondary cross ’T’ of length 600mm

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse sand : 4-

graded stone aggregate 20mm nominal size) foundation concrete 1:3:6 mix (1-

cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside plastering 15mm thick

with Cement Mortar 1:5 (1-Cement : 5-coarse sand) finished with a floating coat of

neat cement and making channels in cement concrete 1:2:4 mix (1-Cement :2-Coarse

sand :4- stone aggregate 20mm nominal size) finished smooth complete including Rupees Eight Thousand Four

95 2.00 curing and festing (i) Inside size 900mm x 1200mm and 1.5M. deep including C.I. 8411.34 Hundred Eleven Paise NOS

cover with frame size 560mm diameter total weight of cover and frame to be not less ThirtyFour Only

than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick

walls of brick msonry using brick having crushing strength not less than 35Kg. /

Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse sand) (2) B type depth 1.50 Metre

for 150mm diameter sewer.

Providing and fixing of 2-D cut vinyl Flooring work of brand 3M including all

Rupees One Thousand Two

material,machine cutting, labour,and hardwares, waste of materials etc and complete

96 140.00 1227.86 Hundred TwentySeven Paise SMT

the work satisfactorily as per instruction of architect or Engineer-in charge.

Providing and fixing in position callapsible steel shutters with vertical channels 20 x

10 x 2 mm braced with flat iron diagonals 20 x 5 mm size with top and bottom rails of Rupees Three Thousand Eight

97 18.00 T_rin 40x 40 x 6 mm with 38mm dia, steel pulleys complete with bolts, nuts, locking 3858.10 Hundred FiftyEight Paise Ten KG

arrangements, stoppers handles including applying a priming coat of read lead paint. Only

Providing & constructing of Granite top Sandwitch type Kitchen Platform as per

detail design & drawing of 1.2 mtr. height & 90 cms. wide resting on both side

polished kotah stone 25 mm thick top and 40mm thick polished kotah stone vertical Rupees Three Thousand Six

98 27.00 support fixing by making grooves with 18 mm thick black granite stone slab top 3645.09 Hundred FourtyFive Paise RMT

including moulding the external edge of the granite shall be finished with Quarter Nine Only

round molding & mirror polished etc.complete as directed.

Providing and fixing water closet squatting Pan (Indian type W.C. Pan) size 580mm

Rupees Six Hundred

99 15.00 (Earthwork, bed concrete, foot reste and trap to be measured and paid for 632.06 NOS

ThirtyTwo Paise Six Only

separately) (A) Vitreous China.(I) Long pattern = White colour

Providing & fixing wash down Water closet (European type W.C.Pan of Cera or

Hindware brand)with integral 'P' or 'S' trape including jointing the trape with soil Rupees Nine Hundred

100 20.00 pipe in cement mortar 1:1[1-Cement:1-Fine sand], plastic seat and cover for wash 937.48 ThirtySeven Paise FourtyEight NOS

down water closet with C.P.Brass hinges and rubber buffers. [A] Vitreous China Only

pattern in white colour

Providing and fixing Urinal of approved quality of Cera or Hindware brand including Rupees One Thousand

101 5.00 connection with trap and with integral longitudinal flush pipe etc. complete.[A] 1038.23 ThirtyEight Paise NOS

Squatting plate pattern 550mmx 300mm TwentyThree Only

Providing & fixing flat back Wash Basin of of Cera or Hindware brand of size 550x400

mm with single hole for pillar tap with C.I. or M.S.brackets painted white including

Rupees Nine Hundred

cutting holes and making good the same including C.P.Brass waste, M.I.Fisher union

102 26.00 921.57 TwentyOne Paise FiftySeven NOS

32mm dia.,15mm dia piller tap, capstan head, screw down high pressor with screws,

and back nuts, C.P.Brass stop tap, and plastic connection P.V.C.Waste pipe, Rubber

Providing and fixing 600mm x 450mm bevelled edge Mirror of superior glass Rupees Six Hundred

103 10.00 mounted on 6mm thick A.C.sheet or plywood sheet and fixed to wooden plugs with 623.57 TwentyThree Paise FiftySeven NOS

C.P. brass screws and washers etc.complete. Only

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with

Rupees Three Hundred

jali of the following nominal diameter of self cleansing design with C.I scread down or

104 70.00 372.24 SeventyTwo Paise NOS

hinged grating including the cost of cutting and making good the walls.

TwentyFour Only

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure

polythene pipes of the following outside Dia. Low densidy, complete with special Rupees Two Hundred SixtySix

falnge compression type fittings, wall clipsetc. including making good the wall ceiling Paise Nineteen Only

and floor.(F) 75mm

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure

Rupees Three Hundred

polythene pipes of the following outside Dia. Low densidy, complete with special

106 150.00 351.85 FiftyOne Paise EightyFive RMT

falnge compression type fittings, wall clipsetc. including making good the wall ceiling

and floor.(B) 110 mm dia.

Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B)

conforming to IS 13592-1992 with one end plain and other end socketed with rubber

ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system

pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be

Rupees Five Hundred FiftySix

107 50.00 fixed on wall using of PVC clamp of the size 110 mm diametre x 149 mm length x 145 556.76 RMT

Paise SeventySix Only

mm heigh at every 2000 mm center to center or shall be concealed in walls as

directed including necessary fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent cement including cost of all

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and Rupees One Thousand Three

108 8.00 water tight C.I. cover with frame of 300mm x 300mm size (inside) with standard 1350.37 Hundred Fifty Paise NOS

weight.(i) Square mouth traps. (A) 100mm x 100mm size P type. ThirtySeven Only

Constructing brick masonary chamber for under ground C.I. inspection chamber and

bends with bricks having crushing strength not less than 35 Kg/Cm2 in Cement

Mortar 1:5 C.I.Cover with frame (Light dury) 450 MM x 610 MM internal dimensions,

total weight of cover with frame tobe not less than 38 kgs. (weight of cover 23 kgs.

Rupees Two Thousand Eight

and Wt. of frame 15kgs/ ) R.C.C.top slab with 1:2:4 mix (1-Cement : 2-Coarse sand : 4-

109 10.00 2854.96 Hundred FiftyFour Paise NOS

Graded stone aggregate 20MM size) foundation concrete 1:5:10 inside plaster 15MM

thick with cement Mortar 1:3 finished smooth with a floating coat of neat cement on

wall and bed concrete etc. complete.In side dimensions, 455mmx 610mm and

mm deep for single pipeline.

Providing, laying and jointing in true line and level U.P.V.C. Pipe (SCH-40) including

fitting of PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent or as approved by

Engineer-in-charge. Pipe shall be fixed on the wall with the help of clamp at every

Rupees EightyFive Paise

110 200.00 two meter c/c or shall be concealed as directed including necessary fittings etc. 85.72 RMT

SeventyTwo Only

including testing of pipe and joints and fixing the same with adhesive solvent and

including cost of all materials. (A) 15mm dia

Providing, laying and jointing in true line and level U.P.V.C. Pipe (SCH-40) including

fitting of PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent or as approved by

Engineer-in-charge. Pipe shall be fixed on the wall with the help of clamp at every

Rupees One Hundred Eight

111 250.00 two meter c/c or shall be concealed as directed including necessary fittings etc. 108.36 RMT

Paise ThirtySix Only

including testing of pipe and joints and fixing the same with adhesive solvent and

including cost of all materials.(B) 25mm dia

Providing, laying and jointing in true line and level U.P.V.C. Pipe (SCH-40) including

fitting of PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent or as approved by

Engineer-in-charge. Pipe shall be fixed on the wall with the help of clamp at every Rupees One Hundred

112 175.00 two meter c/c or shall be concealed as directed including necessary fittings etc. 174.76 SeventyFour Paise SeventySix RMT

including testing of pipe and joints and fixing the same with adhesive solvent and Only

including cost of all materials(C) 40mm dia

Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted white including

Rupees Two Thousand

113 3.00 cutting holes in walls and making good the same but excluding fittings. (C) Vitreous 2052.07 NOS

FiftyTwo Paise Seven Only

China Sink.(i) 600mm x 450mm x 150mm size

Providing and fixing screw down bib taps of following size [A] Brass chromium Rupees Two Hundred Two

plated screw down bib tap [i]15mm dia. Paise FiftySix Only

Providing and fixing gun metal check or non return wheel valve B 25 mm dia Rupees Four Hundred

115 15.00 496.35 NinetySix Paise ThirtyFive NOS

Providing and fixing gun metal check or non return wheel valve (B) 40 mm dia Rupees Seven Hundred

116 5.00 782.84 EightyTwo Paise EightyFour NOS

Providing and fixing ball cock of aproved quality as directed (A) copper metal 25 mm Rupees One Hundred FiftySix

Dia Paise Eighty Only

Providing, laying (to level or slopes) and jointing reinforced concrete Light duty non-

pressure Pipes I.S. class NP2 of the following internal diameter with collars and butt Rupees Four Hundred Seventy

ends prepared for collar joints including testing of joints complete. (D) 300mm Paise EightySix Only

Providing and fixing chromium plated brass half turn flushcock at all floor level, of

Rupees Three Hundred Eleven

119 16.00 approved quality incl. fixing in pipe line etc. comp.(ii) 25mm dia. 311.25 NOS

Paise TwentyFive Only

Providing erecting and fixing double coatedSyntex PVC. (ISI) water tank of

Rupees Four Paise SixtySix

120 20000.00 requiredcapacity each withall necessary fittings andconnection etc. complete on 4.66 Litrs

Providing and Fixing in position cowl vent to pipe (B) 75 mm Rupees Three Hundred

121 10.00 392.39 NinetyTwo Paise ThirtyNine NOS

Providing and Fixing in position cowl vent to pipe (C) 110 mm Rupees Five Hundred

122 11.00 528.13 TwentyEight Paise Thirteen NOS

Providing and laying ordinary C.C. M25 mix for R.C.C. work including

boxing,centering,vibrating, curing and mixed with approved water proofing cement

compound or "CEMWET" or " PIDICRETE LW" integral water proofing admixture as

water proofing agent to be mixed with 50 kgs. bags shall be as recommended by the

manufacture of the water proofing material, concrete work for top, bottom slab &

side pardi for under ground & over head water tank item incl. Necessary excavation

& refilling the available earth, 15 cm thk. C.C 1:4:8 for bedding of concrete, 10 mm

Rupees Eleven Paise

123 75000.00 thk. water proofing cement plaster in C.M. 1:2 with smooth finishing, watering etc. 11.41 Lit.

Comp. to all inner face of tank & 20 mm thk. sandface cement plaster consisting base

coat of 12 mm thk. in C.M. 1:3 & 8 mm thk. finishing coat of C.M. 1:1on outer surface

of tank curing etc. comp. including locking arrengement outlet, inlet, overflow and

washout outlet pipe arrengement as necessary & C.I. Cover 0.60 x 0.45 weight not

less then 35 kg. etc. comp as per structural drawing excl Steel & as directed by Eng-in-

Drilling pilot bore hole of size 250 / 300 mm at above village site in all starata by Rupees Three Hundred

mud flush direct rotary rig. SixtyNine Paise Sixty Only

Reaming of 250 / 300 mm dia pilot bore hole to size 450 mm dia. including Rupees Two Hundred

125 200.00 assembling, jointing, lowering of housing casing screen pipes & other assembly items 247.43 FourtySeven Paise RMT

with gravel packing and clay balls packing etc. FourtyThree Only

Supply of gravels of selected size 4 mm to 6 mm. Rupees Two Hundred

126 20.00 295.73 NinetyFive Paise Cmt

SeventyThree Only

Supply of clay balls having size of 25 mm to 50 mmv. Rupees Eight Hundred

127 30.00 849.41 FourtyNine Paise FourtyOne Cmt

Supply of cement. Rupees Seven Thousand One

128 1.00 7128.58 Hundred TwentyEight Paise MT

FiftyEight Only

A).Cement sealing.

Rupees Fifteen Thousand

Fourteen Paise SixtySix Only

B). Bottom sealing. Rupees Seven Thousand Five

130 1.00 7534.60 Hundred ThirtyFour Paise Job

Manufacturing supplying and dilivery isi marked (IS 12818 With letest amedment ) Rupees One Thousand Three

131 50.00 200 mm nominal dia "CM" Type 1350.37 Hundred Fifty Paise RMT

ThirtySeven Only

Manufacturing supplying and dilivery of cage type trapazoidal shape ( v) wire would

Rupees One Thousand Four

low carbon, galvenized screen pipe and stainless steel screen pipe conferming IS

132 50.00 1401.88 Hundred One Paise RMT

8110 Rate are exclusive of gst- 200 mm dia regular 1.00 mm slot size

EightyEight Only

Manufacture, Supply and Delivery of 80 mm Nominal dia UPVC Column Pipes

including PVC Socket (Coupler), Density of Pipe 1.38 to 1.43 Gm per Cm3 , OD : 87.5 Rupees Six Hundred Twenty

TO 88.2MM, Wall Thickness End : 9.8mm to 11.9mm, Berral : 7.3mm to 9.0mm, Paise Fourteen Only

Length: 3 Mtrs..

Manufacture, Supply and Delivery of 80 mm size CI Pipe Adaptor and Pump Adaptor Rupees One Thousand One

134 1.00 for UPVC column Pipes.. 1167.56 Hundred SixtySeven Paise SET

Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40)

for cold water including fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre C/C or shall be concealed Rupees Two Hundred Thirty

as directed including necessary fittings etc. including testing of pipe and joints and Paise Ninety Only

fixing the same with adhesive solvent, including cost of all materials.

Providing, laying and jointing in true line and level U.P.V.C. Pipe (SCH-40) including

fitting of PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent or as approved by Rupees Five Hundred Five

Engineer-in-charge. Pipe shall be fixed on the wall with the help of clamp at every - Only

threaded type foot valve .

Providing three phase submersible pump set Electrical motor driven bore well

Rupees Nineteen Thousand

submercible pump set conferming IS 8034 and motor conferming IS 9283 working

137 1.00 19230.40 Two Hundred Thirty Paise NOS

3 phase 400/440 volt 50 C/S AC supply & 290 R.P.M ( cat ii hp 7.5, lpm 200, head

Providing controll pannel board of DOL star/delta starter suitable for local & remote

pump controll application consisting of mpcb over load relay and contactor as per Rupees Five Thousand Four

138 1.00 type ii co-ordination including digital volt meter analogue meter with selector switch 5466.83 Hundred SixtySix Paise NOS

run hour meter required protective relay & controll acessoriesDOL UP TO 5 HP EightyThree Only

Providing flat PVC submersible cable as per as per GWSSB R/C specification of size 1 Rupees One Hundred

139 200.00 x 3 x 6 mm2 119.39 Nineteen Paise ThirtyNine RMT

Supplying of single phase submersible pump set suitable for 100 mm size or more

Rupees Thirteen Thousand

dia bore well having motor capacity and discharge as under with necessary panel

140 1.00 13938.00 Nine Hundred ThirtyEight NOS

box(a) Motor rating 1 HP (12 stage) pump having capacity of 50 LPM at 43 to 45 mtr

head suitable for 32 mm dia. delivery pipe Cat.II

Supplying & erecting earth pit of minimum bore dia.150mm size ASH or approved

make Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free G.I.Pipes having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising, Rupees Six Thousand Seven

141 1.00 connection terminal dia of 12mm with constant ohmic value surrounded by highly 6795.28 Hundred NinetyFive Paise NOS

conductive compound with high charge dissipation suitable for following type of TwentyEight Only

applications. (A) For Electrical installation up to 11 KV in normal soil.Length of Pipe :

2.00 mtrs. Back filling Compound :1 no. Bag of 25 Kg.

Supplying & Erecting approved make ELCBs/ RCCBs confirming to IS; 12640 and

having sensitivity of 30 mA and short circuit withstand capacity of 6 KA and suitable

Rupees Three Thousand Five

for operation on three phase 415 kv having characteristic of quick action & tripping

142 1.00 3585.50 Hundred EightyFive Paise NOS

with all advance feature & do not incorporate any electronic component for following

max. rating erected as directed. (A) Suitable for three phase 63 amp F.P. cat III

Providing and fitting ready made pre fabricated portable chemicalised ferro concrete

mini panel cabin having outer size 110 cm X 50 cm X 190 cm with necessary fitting Rupees Thirteen Thousand

for electrical panel & energy meter mountig complete as per detailed specifications & One Hundred Thirty Only

Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6- hand Rupees Two Thousand Six

144 3.00 broken stone aggregates 40 mm nominal size) and curing complete excluding cost of 2658.62 Hundred FiftyEight Paise CMT

formwork in (A) Foundation and Plinth SixtyTwo Only

Providing and fixing C.I. Manhole cover 0.60 M.x0.45M. size having weight not less Rupees One Thousand One

145 4.00 than 35Kg. 1130.64 Hundred Thirty Paise NOS

Supplying & fixing 100 mm dia P.V.C.Vent pipe of approved quality fixed on wall with

clamps or concealed with all its accessories like bends, junctions, shoes, cowl or mica Rupees Three Hundred Three

flap value etc. with joints filled in with c.m. (1:3) and fixed frully vertical with three Only

coats of white or colour wash etc. comp. as directed.

Providing & Laying 150 mm dia G.S.W. Pipe line with stiff mixture of c.m. (1:1) incl. Rupees Two Hundred

147 10.00 proper slope, testing of pipe, joints necessary escavation for pipe line & refilling the 223.77 TwentyThree Paise RMT

same as per the direction etc. comp. as directed. SeventySeven Only

Providing & casting in situ C.C. (1:2:4) for R.C.C. slab cantilevered or simply

supported using 12 to 20 mm size black trap metal of approved quality as an

aggregate including scaffolding, watering, curing, centering,15 mm th.Cement plaster

Rupees Three Thousand Eight

in C:M(1:3) with cement or lime niru finish & 3 coats of white or colour wash to soffit

148 6.00 3867.09 Hundred SixtySeven Paise CMT

and sides & top to be finished smooth simultaneously in C:M (1:2) & pure cement

including using machine mixed concrete & compacted with vibrators etc.complete as

per detailed drawing and as directed. [excluding the cost of reinforcement]

Providing & casting in situ C.C. (1:2:4) for R.C.C. plinth beam using 12 to 20 mm size

black trap metal of approved quality as an aggregate including watering, curing,

Rupees Three Thousand Eight

scaffolding, centering ,using machine mixed concrete & compacted with vibrators,

149 2.00 3828.71 Hundred TwentyEight Paise CMT

finishing the surface etc. as directed & as per detailed drawing & design & as

SeventyOne Only

instructed by the engineer in charge etc.complete as per detailed drawing and as

directed. [excluding the cost of reinforcement]

Filling the filter chamber with cource materials like gravel brick, bats, clinker, incl.

Rupees One Thousand Ten

150 1.00 giving the test of whole septic tank for functionating by keeping the water to the full 1010.00 NOS

level added with materials like cow dung etc.complete as directed

Providing and fixing C.I. Steps of approved quality & 500x150x22.5 mm size as per

Rupees One Hundred FiftyOne

151 9.00 detailed drawing & design including applying 2 coats of anti corrosive paint 151.50 NOS

Paise Fifty Only

etc.complete as directed.(MR)

Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished iron J or L

Hooks, Bolts and nuts 8mm diameter with bitumen and G.I. limpet washer or G.I. Rupees Seven Hundred

limpet washer. filled with white lead complete excluding the cost of purlins, Rafters Twenty Only

and Trusses.(1) 0.80 mm thick sheet.

Providing and laying cement concrete 1:4:8 (1- Cement : 4-coarse sand : 8- hand Rupees Seven Hundred

153 155.00 broken stone aggregates 40 mm nominal size) and curing complete excluding cost of 2381.98 TwentyThree Paise CMT

formwork in (A) Foundation and Plinth TwentyFour Only

Providing and Laying trimix Controlled cement concrete M-200 finishing smooth

with curing etc. complete including the cost of formwork but exculding the cost of

Rupees Four Thousand

reinforcement for internal road having thickness of 15 CM.compaction and finishing

154 155.00 4024.21 TwentyFour Paise TwentyOne CMT

of road by trimix process surface by using vaccum dewatering, floater surface

vibrator etc.Rate are also inclusive of Providing and Mixing Plastisizer of approved

Providing and fixing rubber dye pre-cast inter locking concrete block 60mm thick

with grade of concrete M200 and pnumatic compressed by mechanically pressed and Rupees Seven Hundred Fourty

as per approved design including 75mm Sand layer for levelling and filling the joint Paise FiftyOne Only

with sand in proper line and level etc complete.

Providing and fixing pre-cast concrete kerb stone of gray cement based concrete

Rupees Three Hundred

block 30cm length,30cm height and 15cm thick of M250 grade concret as per

156 21.00 329.82 TwentyNine Paise EightyTwo RMT

approved design and including excavation for fixing in proper line and level,filling the

joint with C:M 1:3 (1cement:3fine sand) etc complete.

Providing Loam or Clay soil of approval quality on site. Rupees One Hundred

FourtySix Paise Fourty Only

Labour for spreading and mixing loam or clay soil or river silt evenly over excavated

Rupees SeventyFive Paise

158 100.00 area and levelling the same after clods etc. (Rate for one Cu. m. of soil) 75.47 CMT

FourtySeven Only

Lawn/Grass Supplying and planting of good quality nodes of specified grass for

dibbling: It includes the cultivation of dround to a depth of 150mm, Planting (2”-3"

apart) of grass as per drawing without disturbing the desired gradient and level, Rupees One Hundred

159 250.00 watering, maintaining (forking, mowing, weeding, fertilizer application, pest control 153.52 FiftyThree Paise FiftyTwo SMT

etc.) it for a period of 3 months from the date of lawn dibbling/plantation. Only

Doob grass(dibbling)

Shrubs/Ground covers Supplying and planting healthy shrubs of different species of

500mm to 2000 mm height: by using the soil/ manure (either carted or supplied),

and watering it immediately. Maintaining( application of liquid manures/ growth

Rupees Two Hundred Two

160 50.00 regulators/ pesticides as per need, weeding and gap filling regularly so as to keep the 202.00 NOS

plant healthy all the time) it for a period of 6 months from the date of plantation-

Divas No RAJA,Ixora red,jasud,Hamelia,Divas No Raja parple

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both

are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to

10 mtr length , in below type of pipe erected with 6A Modular type switch / bell push

& accessories and earth continuity of following type, erected on PVC /

Rupees Four Hundred

161 234.00 Metallic/Wooden box, single mounting base frame covered with 454.50 Pt.

FiftyFour Paise Fifty Only

textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed. (f)

with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling

complete Cat. III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of

.ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected with 6A Modular type switch and hum free EME

four or more step type electronic fan regulator with separately mounted and

accessories with earth continuity of following type erected on PVC / Rupees Six Hundred ThirtySix

Metallic/Wooden box, single mounting base frame covered with Paise Thirty Only

textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe

erected. with necessary ceiling rose / H.D.Connector as directed. (f) with medium

class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat.

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of

ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected complete with Modular type switch & 5 pin Plug

erected on PVC / Metallic/Wooden box covered with appropriate front plate modules Rupees Four Hundred

163 71.00 erected on / in wall / ceiling as per pipe erected with following type of accessories. 479.75 SeventyNine Paise Pt.

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby SeventyFive Only

switchboard/mcb db board.(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete Cat. III

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured /

Rupees One Hundred

164 97.00 metallic/white front plate , modules erected with necessary connections as per site 181.80 Ea.

EightyOne Paise Eighty Only

situation directed by Engineer In charge. (9) 16 Amp. SP one way switch Cat.III

(10) 6/16Amp. Universal socket Cat.III Rupees Two Hundred Two

(3)Two pin RJ-11 Telephone socket with top [A] For One Gang Cat. III Rupees One Hundred SixtyOne

Paise Sixty Only

(4) TV Co-axial Socket outlet Cat. III Rupees One Hundred SixtyOne

Paise Sixty Only

(8) Computer RJ-45 socket Rupees One Hundred SixtyOne

Paise Sixty Only

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket

erected on PVC / Metallic/Wooden box, single mounting base frame covered with Rupees Two Hundred

textured / metallic/white front plate modules erected on / in wall / ceiling with FourtyTwo Paise Fourty Only

following type accessories Cat. III

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected concealed in

/flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated Rupees Eighty Paise Eighty

stranded wire of green colour for earth continuity of following size.(A) with medium Only

class Rigid PVC pipe and accessories.(b) 2 wire 2.5 sq. mm )

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected in / on wall /

Rupees One Hundred Eleven

171 600.00 ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green 111.10 Mtr

colour for earth continuity of following size(A) with medium class Rigid PVC pipe and

accessories.(a) 2 wire 4 sq. mm

.(h) 4 wire 6 sq. mm Rupees Two Hundred

SixtyTwo Paise Sixty Only

(i) 4 wire 10 sq. mm (use earth wire of 4 sq.mm ) Rupees Four Hundred

173 600.00 429.25 TwentyNine Paise TwentyFive Mtr

Providing & Erecting approved make following size of TV Co-axial flexible cable

comprising inner conductor of solid bare copper insulated with Foam PE & Rupees ThirtyEight Paise

Secondary conductor made of poly- Aluminium film bonded Al. Braids @ suitable ThirtyEight Only

coverage overall sheathed with black PVC insulation. b).RG-6

Supplying & erecting approved make Telephone Cable electrolytic copper conductor

PE insulation twisted in two pairs, & wrapped with FRLS PVC tape & sheathed with

FRLS PVC or HFFR outer Jacket suitable for telephone wiring & confirming to C-DOT Rupees Eighteen Paise

erected in existing pipe. of following size of conductors & nos.of pairs. With necessary Eighteen Only

connections.[A] Conductor Size 0.5 mm (a) Unarmoured 2) Two Pairs

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size

complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Rupees TwentyThree Paise

Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in TwentyThree Only

approved manner as directed.(b) 25 mm

(c) 32 mm Rupees FiftyThree Paise

FiftyThree Only

Providing & erecting Switch board for Computer or electric apparatus consisting of

following modular type accessories mounted with PVC / Metallic concealed/open

Rupees One Thousand One

box with single mounting base frame covered with textured/metallic /white front

178 13.00 1151.40 Hundred FiftyOne Paise Ea.

plate,modules erected with necessary connections as directed. 1 no. 6A/16A

universal plug-switch combined.3 nos. 6A Switch 3 nos. 6A 5 pin Plug .For Modular

Type Accessories Cat.III

Supplying & erecting approved make LAN cable of following size in existing pipe as Rupees FourtyFive Paise

per direction [C] CAT - 6 FourtyFive Only

Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant PVC insulated conforms to

IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control Rupees Fifteen Paise Fifteen

panel, relays, power switchgears, motor starters & control wiring) with required size Only

of copper lugs, nuts and bolts if required.(b) One wire 1.50 sq. mm

(c) One wire 2.50 sq. mm Rupees TwentyFive Paise

TwentyFive Only

(e) One wire 6.00 sq. mm Rupees FiftyFive Paise

(f) One wire 10.00 sq. mm Rupees Ninety Paise Ninety

(g) One wire 16.00 sq. mm

Rupees One Hundred

FourtyOne Paise Fourty Only

(h) One wire 25.00 sq. mm Rupees Two Hundred

185 60.00 237.35 ThirtySeven Paise ThirtyFive Mtr

(j) One wire 50.00 sq. mm Rupees Four Hundred

186 60.00 474.70 SeventyFour Paise Seventy Mtr

Providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to

Rupees One Hundred Sixteen

187 216.00 operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in 116.15 Ea.

Paise Fifteen Only

existing box. confirming to IS 8828/1996 with ISI Mark Cat.III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve)

Rupees Seven Hundred

188 24.00 having 10KA breaking capacity & confirms to IS :8828 in existing box having 757.50 Ea.

FiftySeven Paise Fifty Only

following capacity (c)63 Amp Cat.III

Providing and erecting Sheet Steel powder coated MCB distribution board - flush /

surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to

IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The Rupees Two Thousand Seven

189 12.00 DBs should be used of same company of MCB to be used) suitable for (B) three phase 2766.39 Hundred SixtySix Paise Ea

incoming and single phase horizontal type outgoing Per phase isolation type (PPI) (b) ThirtyNine Only

sheet steel double door (ii)6 way

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Rupees Three Hundred

190 4.00 Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having 338.35 ThirtyEight Paise ThirtyFive Ea

following capacity (B) 40 Amp. Cat.III Only

Providing and erecting Approved make ELCBs / RCCBs conforming to IS: 12640 and

having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and

Rupees Two Thousand Six

suitable for operation on single phase 240 V,50Hz. having characteristic of quick

191 36.00 2636.10 Hundred ThirtySix Paise Ten Ea

action & tripping with all advance feature & do not incorporate any electronic

component. for following Max. rating erected as

directed.(ii) 40Amps. DP Cat. III

Providing and erecting Approved make Four pole moulded case circuit breaker

having breaking capacity ICU of 25 KA. at 415 V,having normal current rating up to Rupees Six Thousand Three

192 2.00 25 A to 100A. with Fixed thermal & magnetic release suitable to work on A.C. supply 6352.90 Hundred FiftyTwo Paise Ea

50 c/s. with all internal connections & complete erected in existing 16 G.M.S. housing. Ninety Only

ICS=100% of ICU only Cat III

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C

Rupees Three Hundred Eight

193 8.00 Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having 308.05 Ea

Paise Five Only

following capacity (A) 6 to 32 Amp. Cat.III

Providing & erecting weather proof, dust & vermin proof, floor mounted front

operated indoor type cubical panel board necessary IP42 and above protection as

per approval from engineer incharge made from 14 SWG thick

CRC M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for internal

partitions with necessary accesories , supporting angles/ flats channel including

cutting, bending, drilling, welding, riveting with internal partitions & cable alley as

per requirements & instruction of engineer-in-charge with erection of supplied

switch gears, BUSBARS, suitable size of inter connecting PVC copper wire /

copperaluminium strips, rubber grommets, rib, bakelite control fuses/MCB for Rupees Seventeen Thousand

194 4.00 measuring instruments, earth bus & earth bolts, foundation flange - boltsbase Plates, 17584.10 Five Hundred EightyFour Sq Mtr

sufficient nos. of hinged doors, handles with locking arrangement and rubber Paise Ten Only

gasket,heavy duty end terminal connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel shall be painted with epoxy powder

coating.(The rates excludes the cost of switchgears, bus bars, inter connecting mains

& Copper Aluminium strips, meters, Fuses etc. The dimension shall be measured

excluding base beams) The panel shall be supplied with following approved

manufacturers with followingsize.(B) The standard companies switch gear shall be

used and only manufacturers at CPRI approved factory (i) with 350mm depth

Supplying & erecting approved make Four Pole 415V change over switch interior for

Rupees Nine Thousand One

195 1.00 panel mounting with operating mechanism A.C.23 duty confirming to IS for (C)100- 9191.00 Ea.

Hundred NinetyOne Only

Approved make Four pole moulded case circuit breaker having breaking capacity ICU

of 35 KA. at 415 V,having normal current rating 250A. with Fixed thermal & magnetic

Rupees TwentyOne Thousand

196 1.00 release suitable to work on A.C. supply 50 c/s. with all internal connections & 21513.00 Ea.

Five Hundred Thirteen Only

complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only Cat III

Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper

Busbars with four equal Nos. of electrolyte bus having current density not more than

1.6 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour

Rupees Three Thousand

197 3.00 insulating tape for phase sequence of following current carrying capacity, erected 3030.00 Rn.Mtr

with necessary bus bar supports /insulators, main cable socket to each bar, erected

in existing cubical panel with necessary connections. .( B) Suitable for 200 Amp.

Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve) having

Rupees Six Hundred FiftySix

198 2.00 10KA breaking capacity & confirms to IS :8828 in existing box having following 656.50 Ea.

Paise Fifty Only

capacity (b)40 Amp. Cat.III

Providing and erecting metallic vitrified danger notice board as per language

Rupees Eighty Paise Eighty

199 1.00 suggested by engineer incharge for MEDIUM VOLTAGE installation to be erected as 80.80 Ea

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated and

high U.V. & corrosion resistance with diffuser with company mark/name 160V to

270V, Power Factor more than 0.9, THD < 15%, CCT 3000 K to 6500K, Luminaire Rupees Five Hundred

200 170.00 efficacy> 85 lumens/watt ,LED 599.94 NinetyNine Paise NinetyFour Ea.

LED driver efficiency > 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE: Only

Below description have shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity between the ranges shown.) (A)

Tube Light with integral driver (iv) 22-24 Watts, Surge - 2KV,IP-20, conventional

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated

and high U.V. & corrosion resistance with diffuser housed in aluminium casted body

with company mark/name 160V to 270V,Power Factor more than 0.9, THD < 15 %, Rupees Four Hundred

201 40.00 CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt , LED driver efficiency > 496.92 NinetySix Paise NinetyTwo Ea.

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.) (H) Mirror Light 9 Watts, wall

mounted minimum 1 feet long

Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with double

ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete

Rupees Two Thousand Ninety

202 76.00 having 3blades with aluminium blades with , canopy & 30 cm. down rod erected with 2090.70 Ea.

Paise Seventy Only

earthing.(Make shall be approved by Engineer in charge))

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC bars

Rupees One Hundred

up to 50mm length each side and pierced through a 16 Gauge M.S. box / Heavy Duty

203 76.00 126.25 TwentySix Paise TwentyFive Ea.

PVC box complete erected concealed in Ceiling with necessary finishing. .

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box. Rupees Twenty Paise Twenty

Supplying & erecting single phase approved make industrial exhaust fan suitable for

Rupees One Thousand Six

medium duty ring mounted low noise operation suitable for medium duty having

205 24.00 1611.96 Hundred Eleven Paise Ea.

following dia size and maximum speed in RPM [A] 305 mm dia 900 RPM Cat.II

Supplying and erecting approved make Bracket fan of 230 volt, A.C. 50 Cy/s., Rupees Two Thousand Four

206 6.00 400/450 mm sweep complete erected on wall or with lead Cores and connections 2484.60 Hundred EightyFour Paise Ea.

complete.Cat.II Sixty Only

Providing & erecting water cooler having storage capacity 150 Ltr. & cooling capacity

150 Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of the water should

drop by 15˚C within a hour, The water cooler should be comprising of hermetically

Rupees FiftyFive Thousand

207 2.00 sealed compressor, fan motor, condensing unit, water tank surrounded by 55045.00 Ea.

FourtyFive Only

evaporating, coil, thermostats,relay etc.complete with necessary inlet & outlet

connection. The body of water cooler will be made from Stainless Steel.

Supplying & erecting Galvanized M.S pipe post “B” class 88.9 mm O.D 6 mtr. Long

Rupees Four Thousand Five

duly painted with two coats of aluminium paint complete with metallic base- plate of

208 10.00 4581.36 Hundred EightyOne Paise Ea.

300 mm x 300 mm x 4mm thick for using as a compound light pole with approx.

Supplying and erecting Street light pole bracket comprising main B Class GI pipe of

4.2 cm/require outside dia. complete with suitable B Class G.I. sleeve tubing of

approx. 45cms.length and suitable for 76.5mm/80mm/require size of pole top

having nuts and bolts for fixing the brackets and having spread of 0.5 mtr. Length Rupees Seven Hundred

with 110 deg.with vertical plane and suitable welded stiffener reducer and nipple ThirtySeven Paise Thirty Only

with check nut complete painted with one coat.of Red oxide / PU base primer and

two coats of Aluminium / PU paint. paint with following nos of arms. [A] Single Arm

Bracket 0.5 Mtr

[B] Double Arm Bracket 0.5 Mtr Rupees Five Hundred Thirty

Paise TwentyFive Only

Supplying & erecting approved make SMC press moulded composite FRP . loop-in,

loopout approx. 2mm thick box complete with Bakelite connector strip

5way(3P+N+E),DIN rail for mounting mob & hinged doors as per requirement having Rupees Nine Hundred

locking arrangements with mounting clamp with nuts, bolts & washers suitable for SixtyNine Paise Sixty Only

erection on pole with cable clamps& earth bolt of following size of box.(a) 300mm x

200mm x 100mm [deep]

Supplying and erecting B class Galvanized iron pipe having smooth finished bore of

Rupees Two Hundred Twelve

212 30.00 the pipe on both ends erected nuts and bolts along the pole / wall shaping the pipe as 212.10 Mtr.

per site requirement. Pipe dia as following.(a) 25 mm dia

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom including

excavation for the pole of size 45 x 45 x 100 cm. Deep in below ground level with Rupees Eight Hundred

213 10.00 plinth of 45 cm x 45 cm (or 45 cm dia x 45 cm) high upper ground level with 828.20 TwentyEight Paise Twenty Ea

necessary curing and finishing in approved manner.( for 4 & 6 mtr pole) Only

Supplying rubber matting of following thickness as per IS:15652/IEC 61111 (b)4mm Rupees One Thousand Two

Hundred Twelve Only

Supplying & erecting Flexible PVC insulated multistrand multicore 1.1 KV grade ISI

Rupees FourtyFive Paise

215 80.00 marked Copper Wires of following Size to be erected as directed. e) 1.50 Sq.mm 3 45.45 Mtr.

FourtyFive Only

core round PVC sheathed

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in Rupees One Hundred Eighteen

existing trench / pipe of following size of cables (a) 4 core 4 Sq. mm Paise Seventeen Only

(c) 4 core 10 Sq. mm Rupees One Hundred

217 800.00 142.41 FourtyTwo Paise FourtyOne Mtr.

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Rupees One Hundred

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in

218 150.00 185.84 EightyFive Paise EightyFour Mtr.

existing trench / pipe of following size of cables (A) 3 1/2 core 25 Sq. mm ( 16 Sq.

(B) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core) Rupees Two Hundred

219 130.00 224.22 TwentyFour Paise Mtr.

(C) 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core) Rupees Three Hundred

220 130.00 384.81 EightyFour Paise EightyOne Mtr.

Making trench in soft soil of suitable width of 90 cm deep for laying cable or locating

Rupees FiftyFour Paise

221 550.00 the fault all over the run and back filling the same and making the surface as normal 54.54 Mtr.

Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with necessary connecting accessories of Rupees NinetyThree Paise

same material at required depth in existing trench for laying of cable. below ground / NinetyThree Only

road surface for enclosing cable (A)50 mm outer dia

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for

Rupees ThirtyFive Paise

223 6.00 PVC insulated armoured cable complete with out going tails, insulating tape etc for 35.35 Ea.

ThirtyFive Only

following size of cables. (a) 2 to 4 core 2.5 / 4 Sq. mm

(c) 2 to 4 core 10 Sq. mm Rupees Fourty Paise Fourty

Providing and, fixing heavy duty flange type brass double compression type cable

gland with rubber ring for PVC insulated armoured cable complete with out going Rupees Seventy Paise Seventy

tails, insulating tape etc for following size of cables.(A) 3 & 1/2 / 4 core 25 Sq. mm Only

(B) 3 & 1/2 core 35/50 Sq. mm Rupees Eighty Paise Eighty

(C) 3 & 1/2 core 70 Sq. mm Rupees One Hundred Eleven

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of

following size evenly crimped with high pressure tool & connected to switchgear

228 27.00 5.05 Rupees Five Paise Five Only Each

terminals with brass/cadmium plated nut bolts in an approved manner. (A) 4 Sq.mm

(B) 10 Sq.mm Rupees Twelve Paise Twelve

(C) 16/25 Sq.mm Rupees Fifteen Paise Fifteen

(D) 35/50 Sq.mm. Rupees Twenty Paise Twenty

(E) 70 Sq.mm. Rupees TwentyFive Paise

TwentyFive Only

Supplying and erecting LED street light / Flood light fittings with High power White

LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more than

130 lm/w and corrosion free High pressure die cast aluminum housing with smooth

finish powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT Rupees Eight Thousand One

233 10.00 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED 8110.30 Hundred Ten Paise Thirty EACH

driver efficiency > 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Only

Below description have shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity between the ranges shown.) (A)

Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line

supply with over-voltage protection. (ii) above 48 to 60 Watts Cat-lll

(B) Flood Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC

Rupees Nine Thousand Eight

234 4.00 line supply with over-voltage protection. .(iii) Above 60 to 90 watts Cat-lll 9898.00 EACH

Hundred NinetyEight Only

Supplying & erecting earth pit of minimum bore dia.150mm size approved make

Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of

corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having 200- 250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable for following type of

applications with chamber and heavy duty cover.(approved make OEM has to submit

test certificate) & having back filling compound of (B) Inner chemical (CCM

Rupees Six Thousand Seven

Compound)- Resistivity:- 0.2 • / meter testing as per IEC 62561-2017, Voltage drop:-

235 6.00 6795.28 Hundred NinetyFive Paise Ea.

< 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill Compound :-

TwentyEight Only

Earthing compound should be capable to retainmoisture for long time Necessary test

report must be submitted.(c) For Electrical Installation covering Transformer

Neutrals, Lightning arrester Earthing, A.C.Plant & Sensitive Computer System(like

Automation, SCADA) i.e independent (b)For Electrical installation up to 11 KV in

Length of Pipe : 2.00 mtrs

Back filling Compound :1 no. Bag of 25 Kg

Supplying & erecting funnel type earthing having earth plate of following size burred

in specifically prepared earth pit 3 mtr. below ground with 40 kg. charcoal and salt

with alternate layers of charcoal & salt, 20mm.dia. G.I. pipe with Funnel with a wire

mesh for watering & bricks masonry block, C.I. Cover complete as per para 7.3 of IS

3043 with necessary length of double Galvanised Iron / copper earth wire No 6 SWG Rupees Two Thousand Seven

bolted with lug to the plate and covered in 12 mm dia. G.I. pipe 2.5 mtr long complete Hundred TwentySeven Only

connected to the nearest switch gear with end socket as per direction & duly tested

by earth tester confirming to IS (As per drawing) with following specification (A)

With 30 x 30 x 0.35 cms: C.I. earth plate

Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms. dia.

galvanised iron pipe with coupling and buch buried in specially prepared earth pit Rupees Four Hundred

complete with necessary 8 SWG earth wire. - to be used for each Street Light ThirtyFour Paise Thirty Only

For using salt and charcoal / coke as required for pipe type earthing. Rupees Two Hundred Two

Providing one bag of 25 Kg. Additional Back Filling Compound (BFC) suitable for safe Rupees Eight Hundred

239 15.00 earthing device. 833.25 ThirtyThree Paise TwentyFive Ea.

Providing and erecting required size HOT deep Galvanised iron strip for earthing of

Rupees Ninety Paise Ninety

240 50.00 H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc. using proper clamp. 90.90 Kg

Supplying and erecting, commissioning and testing diesel generating set having

continuous rating, 3 phase, 415 volts, 50 cycles A.C. supply comprising of a totally

enclosed air/water cooled diesel engine with multi-cylinders developing suitable

BHP not less than following capacity at 1500 RPM with 10% overload for one hour in

24 hours with standard accessories like fly wheel, lubricating oil cooler, "A" class

governor, heavy duty fuel wheel and lubricating oil filter, oil bath air filler, lubricating

oil pressure gauge, end exhaust manifold, standard set of tools with adjustable

spanners, screw drivers, feeder gauge, cylinder head to cover, joint cylinder head to

exhaust, element lube oil filter, 12/24 volts electric starting equipment complete

with standard battery, dynamo, cut-outs, ammeter, necessary wiring, pressure gauge,

starter etc and heavy duty Residential type exhaust silencer and vertical hot air duct

both logged with asbestos rope, save oil trays, exhaust piping of required length,

standard wall/floor mounted fuel with level indicator and piping and drip proof

alternator, self excited, self regulated, screen protected, with excitation system, Rupees Six Lakh ThirtyEight

241 1.00 capable of delivering the rated system output at 415 volts, 3 phase, 0.8 PF, 50 Hz, 4 638724.00 Thousand Seven Hundred Ea

wire, running at 1500 RPM, conforming to IS-4722- 1968 with voltage regulation TwentyFour Only

+/- 5% of rated voltage from no load to full load. Both the engine and alternator fitted

on a common fabricated steel base plate with antivibration mounting engine and

alternator both connected to each other by flexible flange coupling and with

floor/wall mounted control panel box comprising of voltmeter ammeter, selector

switches, ACB / MCCB / MCB of adequate capacity, indicator lamps duly wired with

HRC fuses. The alternator & control panel shall be connected with provided suitable

capacity armoured cable and complete with Acoustic enclosure (canopy) made out of

18 SWG CRCA Sheet, sound absorbing material Rockwool of 64 density & 100 mm

thick conforming to IS:8183 The resin bonded rockwool covered from inside the

canopy by perforated sheet with 3/4 mm holes, sound level not more than 75 dB at a

distance of 1 mtr, as per PVCT norms. Erection, commissioning and satisfactory

testing as per requirement with first filling of fuel, oil, etc. with guarantee of complete

system for One year. & with obtaining all necessary certificate from Electrical

Providing & erecting approved make AMF control panel suitable for following size of

3 phase, 415 V., 50 cycles, A.C. diesel generating set complete of scope as detailed

1) Power module: A pair of electromechanically interlocked contactors (for mains &

generator) Overload relay for generator contactor Neutral contactor for mains and

generator Power socket for connections.

2) Control and metering module: Line voltage monitor. Generator voltage monitor

Rupees One Lakh Fourteen

Ammeter 3 items attempt start facility. Air circuit breakers/MCB/MCCB of suitable

242 1.00 114837.00 Thousand Eight Hundred Ea

rating for auto/manual operation. Auto/manual switch. Emergency stop push

ThirtySeven Only

buttons. Manual start push button. frequency meter. Engine hour meter. Two

earthing studs. 3) Protection module: The engine shutdown in the unlikely event of

Low lube oil pressure High cylinder head temperature. V belt failure. 4) Indicators

with alarm Load on generator. 5) Indicators Load on mains Engine fails to start .

Emergency stop battery charger. The AMF Panel of following capacity (A) AMF

Control Panel for 50/62.5 KVA 3 phase DG Set

Providing and fixing printed instruction chart both in English and Gujarati and duly

Rupees One Hundred FiftyOne

243 1.00 framed with front glasses, for treatment of person suffering from Electric shock with 151.50 Ea

Paise Fifty Only

minimum 50" diagonally size.

Supplying and erecting approved make set of indicator lamps of LED type lamp, lens

244 2.00 cover, Bakelite holder complete erected with necessary connections. 50.50 Rupees Fifty Paise Fifty Only Ea.

Supplying and erecting approved make panel mounting type Digital Voltmeter having

Rupees One Thousand Five

3 digits LED display, 0 to 750 AC Volts range erected on existing panel board with all

245 2.00 1504.90 Hundred Four Paise Ninety Ea.

connection, wiring etc .with manufacturers calibration certificate.

Supplying and erecting approved make panel mounting type Digital Ammeter having

Rupees One Thousand Eight

3 digits LED display, external CT operated, calibrated for 0 to 1000 Amps suitable to

246 2.00 1838.20 Hundred ThirtyEight Paise Ea.

operate on 500 Volt AC , erected on existing panel board with all connection, wiring

etc .with manufacturers calibration certificate.

Providing & erecting open well horizontal mono block pump set with cast iron body,

Rupees Nine Thousand Six

complete for three phase submersible motor having.[B] For 2 HP 3 phase open well

247 1.00 9655.60 Hundred FiftyFive Paise Sixty Ea.

horizontal mono block pump set suitable for 200 LPM

@ 25 mtr head suitable for 50 mm dia delivery pipe Cat.II

Supplying & erecting approved make motor control cubical panel (Direct - on - line)

made from 16 G. CRCA sheet duly epoxy powder painted inside and outside with

hinged doors and locking, arrangement consisting of suitable size of ON- OFF isolator

(AC - 3/23duty) main fuses, single phasing preventer, indicating lamps for R- Y - B

Rupees Two Thousand Three

phases, overload relay, Automatic water level controller, Ammeter, Voltmeter each

248 1.00 2333.10 Hundred ThirtyThree Paise Ea.

with two way selector switch incoming, wires duly socket crimped, main contactor &

overload relay, start - stop push buttons, to be erected on angle iron frame grouted

on wall as directed. The isolator, overload relay & contactors will be of L & T,

Siemens or BCH make only. (A) DOL up to 5.0 H.P.

Providing and erecting Inverter based approved make split air-conditioning unit

consisting of condensing unit with variable speed fan motor, inverter type

hermetically sealed rotary compressor with accessories etc. duly connected

Rupees FourtyThree

separately erected evaporating unit and blower motor with its accessories by means

249 7.00 43066.40 Thousand SixtySix Paise Ea

of extra supplied proper insulated copper tubing,drain PVC pipes suitable for ( cost

includes Eco Friendly green gas charging and 15A plug top & Remote Control & MS

Stand) with necessary core cutting.(1)For 3 Star Rating of current year (C) for 1.7 to

2 ton capacity - Premium Cat.

Supplying and erecting insulated pair of soft copper tubing including power and

Rupees Eight Hundred Eight

250 21.00 control cable,necessary PVC drain pipes for Split AC machine up to 4 TR capacity 808.00 Rmt.

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of

1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires erected in below type of pipe with 6A Modular type switches

and following type of accessories erected on PVC / Metallic/Wooden box, single

Rupees Five Hundred

251 6.00 mounting base frame covered with textured / metallic/white front plate modules 565.60 Ea.

SixtyFive Paise Sixty Only

erected on / in wall / ceiling as per pipe erected. with necessary batten/angle holder

or ceiling rose or H.D.Connector as directed.(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete Cat. III

Supplying, installation, testing & commissioning of central graphical fire alarm

Rupees TwentyThree

management system having IS or BS (EN 54) (Vds approved) or NFPA

252 1.00 23024.97 Thousand TwentyFour Paise Ea.

UL/ULC/FM approved) with Laetst Ammendment to centrally monitor and operate

NinetySeven Only

the fire alarm system complete as required.

Supplying, installation, testing & commissioning of repeater panel having IS or BS

Rupees One Lakh FiftyThree

(EN 54) (Vds approved) or NFPA 72 (UL/ULC/FM approved) with Latest Amendment

253 1.00 153742.20 Thousand Seven Hundred Ea.

with 320 character/ Touch screen LCD display with inbuilt reset, acknowledge and

FourtyTwo Paise Twenty Only

silence switches complete as required

Supplying, installation, testing & commissioning of intelligent analog addressable

Rupees Four Thousand Two

photothermal detector having IS-11360-1985 or BS 5446 Part I-1977 & Part VII

254 30.00 4290.48 Hundred Ninety Paise Ea.

–1985 (VdS approved) or NFPA72 ( UL/ULC/FM approved) with Latest

FourtyEight Only

ammendment complete with mounting base complete as required.

Call bell / Buzzer,250 volts, complete erected. Rupees Thirty Paise Thirty

Supplying & erecting UPVC Mini trunking (PVC Casing-n-Capping) having double-

locking arrangement with grooves, trunking of size not below 12.5 mm in height as

Rupees Thirty Paise Thirty

256 100.00 per IS with accessories of PVC/Resin polypropylene not below 1.8 mm thick duly 30.30 Mtr.

sealed in joint & erected on wall / ceiling of following size .(2) 25 mm

Providing and erecting PVC body surface or pendent mounting LED Bulk type 9 watt

Lighting Fitting with electronic driver. And lumen output from luminaire 720lm , Rupees One Thousand One

257 6.00 input voltage range 90-300VAC , 50Hz cool white(3000 to 6500k), inbuilt driver, - 1151.40 Hundred FiftyOne Paise Ea.

20degC to +60degC working temperature, AL frame with Beam Angle 120deg Fourty Only

Supplying and erecting approved make online Un-interruptible Power Supply system

comprising flat cum-boost charger, static Inverter & sealed maintenance free SMF

batteries. The charger having operating capacity for input 160-270V AC & inverter

having output 230V,50 Hz Ac with 0.8 load power factor with battery, over/under Rupees TwentyNine Thousand

voltage output with over load & short circuit protection equipment. The system Two Hundred Ninety Only

housed in CRC sheet duly powder coated paint with following power backup.with MS

painted batteries stand, 10% Overload capacity for momentary load. (C) 3 KVA with

Supplying & erecting Flexible PVC insulated multistrand multicore 1.1 KV grade ISI

Rupees SeventyFive Paise

259 600.00 marked Copper Wires of following Size to be erected as directed. h) 2.50 Sq.mm 3 75.75 Ea.

SeventyFive Only

core round PVC sheathed

Supply of Fibreglass Platform Step (A Type) Ladder - 18 FT having following

specifications : It should have large fully serrated platform 15” wide 20” deep which

Rupees ThirtySix Thousand

260 1.00 locks ladder , Aluminium feet with thick rubber tread, top rail guard to serve as a 36360.00 Ea.

Three Hundred Sixty Only

railing, two pairs of gusset support at the bottom step and All gussets are heavy duty

steel. Capacity : 300 lbs.

Supplying and erecting approved make water filter having outer body of tough

Rupees One Thousand Fourty

261 2.00 polycarbonate with fitter cartridge having filter to trap micro elements with coupling 1040.30 Ea.

Paise Thirty Only

suitable for erection on pipe line.

Supply, Installation, Testing & Commissioning of outdoor 2 MP IP Dome Camera of

1/2.8" Progressive CMOS Sensor with resolution 30 fps @ 2048x1536 & Manual Vari

Focal f = 3- 9 mm Field of View 40° ~ 80° (H), 30° ~ 60° (V) IR range upto 30 Mtr Rupees Six Thousand One

262 14.00 Smart IR Min. Illumination 0.1 Lux @ F1.4 (Color), 0.01 Lux @ F1.4 (B/W) 3D Noise 6167.57 Hundred SixtySeven Paise Ea.

Reduction ; P-iris Lens & Digital Image Stabilization ; ONVIF IP43, CE, FCC Class A, UL FiftySeven Only

listed with all required accessories.

Supply, Installation, Testing & Commissioning of Indoor / Outdoor 2 MP IP Bullet

Camera of 1/2.8" Progressive CMOS Sensor with resolution 30 fps @ 2048x1536 &

Manual Vari Focal f = 3- 9 mm Field of View 40° ~ 80° (H), 30° ~ 60° (V) IR range Rupees Six Thousand One

263 4.00 upto 30/50 Mtr Smart IR Min. Illumination 0.1 Lux @ F1.4 (Color), 0.01 Lux @ F1.4 6167.57 Hundred SixtySeven Paise Ea.

(B/W) 3D Noise Reduction ; P-iris Lens & Digital Image Stabilization ; ONVIF IP66, FiftySeven Only

IK10, CE, FCC Class A, UL listed with all required accessories.

Supply, Installation, Testing and Commissioning of Network Video Recorder with Rupees Seven Thousand Five

264 1.00 maximum 16 IP Cameras, up-to 4 HDD slots, simultaneous 1/4/9/16 channels 7538.14 Hundred ThirtyEight Paise Ea.

playback and H.265+ / H.265 / H.264 recording supported. Fourteen Only

Supply, Installation, Testing and Commissioning of 4TB Surveillance HDD for 30-days Rupees Nine Thousand Eight

265 1.00 motion based recording storage 9868.10 Hundred SixtyEight Paise Ten Ea.

Supply, Installation, Testing & Commissioning of Layer 2 Manageable 28 Port PoE

Rupees SixtyEight Thousand

Giga Switch, 24*10/100/1000 Mbps PoE, Additional 2*Gigabit SFP and Additional

266 1.00 68528.50 Five Hundred TwentyEight Ea.

2*10G SFP+ port, RJ-45/RS-232 Console Port & Stakable feature Inclsv. Mounting

Paise Fifty Only

hardware & standard accessories as per tender specification.

Supply, Installation, Testing and Commissioning of Cat6 UTP 24 Port Loaded Patch Rupees Eighteen Thousand Six

267 1.00 Panel and 24 Each 1 meter Cat6 UTP Patch Cord 18658.94 Hundred FiftyEight Paise Ea.

NinetyFour Only

Supply, Installation, Testing and Commissioning of 9U Network Rack with exhaust Rupees Seventeen Thousand

268 1.00 fan and 6 Socket Power Strip 17078.68 SeventyEight Paise SixtyEight Mtr

Supply, Installation, Testing & Commissioning of 42" LED Professional Display,

Rupees TwentyFour

X 1080 Resolution, 350 CD/M2 Brightness with Videowall Features 24x7 Application

269 1.00 24122.03 Thousand One Hundred Ea.

with keyboard & mouse, Wall Mounting Bracket.

TwentyTwo Paise Three Only

SITC of: Back pull out type -Single Stage, Centrifugal Pump for Main Fire Pump with

Electric Motor, Base frame and Couplings. MOC:-Casing-CI, Impeller- Bronze, Shaft-

SS 410, Sleeve-SS410. Flow Capacity: 2280 LMP (137 m3/hr) @ Head: 60 mtr. Speed:

2900 RPM. Pump shall be capable of furnishing not less than 150% of rated capacity

Rupees Eighty Thousand Six

at a head not less than 65% of rated head The shut off head shall not exceed 120% of

270 1.00 80648.50 Hundred FourtyEight Paise SET

rated head.Pump 20 HP UOM:-Price Per Complete set of Pump + Motor +

Accessories. Note:-01. All civil work like pump foundation, tank hole, water proofing,

etc. subject to your scope. 02. We shall provide power cable up to the pump panel

All other electrification work are subject to your scope.

SITC of: Back Pull-out End Suction Type -Single Stage, Centrifugal Pump for Jockey

Fire Pump with Electric Motor, Mechanical Seal, Base-frame and Couplings. MOC:-

Casing-CI, Impeller- Bronze, Shaft- SS 410, Sleeve-SS410. Flow Capacity: 180 LPM

(10.8 m3/hr) @ Head: 70 mtr. Speed: 2900 RPM. Pump shall be capable of furnishing

Rupees ThirtyTwo Thousand

not less than 150% of rated capacity at a head not less than 65% of rated head The

271 1.00 32612.90 Six Hundred Twelve Paise SET

shut off head shall not exceed 120% of rated head.Pamp rating is 5 HP UOM:-Price

Per Complete set of Pump + Motor + Accessories. Note:-01. All civil work like pump

foundation, tank hole, water proofing etc. subject to your scope. 02. We shall provide

power cable up to the pump panel All other electrification work are subject to your

Supply, Installation and Testing of: Gate/ Sluice (Rising Spindle -Screw & Yoke Type)

Valve with necessary pipe fitments, hardware and consumables. MOC:-Body: Cast Rupees Fifteen Thousand One

Iron, Disk: Cast Iron, Seat: Nitrile, Stem: SS. (With Flange Ends). Standard: ISI Marked. Hundred Fifty Only

UOM:-Price Per Each No. Size: 150 mm

Supply, Installation and Testing of: Gate/ Sluice (Rising Spindle -Screw & Yoke Type)

Valve with necessary pipe fitments, hardware and consumables. MOC:-Body: Cast Rupees Twelve Thousand One

Iron, Disk: Cast Iron, Seat: Nitrile, Stem: SS. (With Flange Ends). Standard: ISI Marked. Hundred Twenty Only

UOM:-Price Per Each No. Size: 100 mm

Supplying installing testing and commissioning of fire hydrant multistage pump

capable of delivering 2850 LPM, @ 200 mtr head coupled to water cooled diesel

engine of adequate HP. It shall be fitted with radiator on a common base from which Rupees Four lakhs Twelve

complete ancillary units such as cooling system, non return valve, Y strainer, fuel Thousand Five hundred Only

tank of adequate capacity, pressure gauge , pressure switch, control panel shall be as

per specification

Supply and installation, testing and commissioning of COMMON control panel for

fire fighting system consisting of electrical mortar driven 60HP main fire pump, Jokey

pump and 12.5 Hp consisting of the following. INCOMING: 1no. set of phase inducing

lamps with SFU rate 350 A 1no set of 400 Amps. TPNE Ai, bus bars 1no. 0-400 Amps.

Ammeter. 1no. 0-600 V voltmeter with phase selector switch, isolating switch 400 A

outgoing for main electrical pump: 1 no 200 amps MCB 1 no. S/D starter suitable for

60 hp 1 no. single phase preventer suitable for the pump described for 60HP 1 no.

single phase preventer suitable for the pump described above 1 no. set on./off

indicating lamps, 1 no. auto manual selector switch outgoing for jokey pump 1no.

amps MCB 1 no. dol starter suitable for 12.50 hp 1no, single phase preventer suitable

for the pump described above 1 no. set of on/off indicating lamps 1 no. auto manual

selector switch ENGINE control selection no.1 diesel engine for stand by pump:a)

Main switch 2 pole on/off -1 no.b) Battery charger with transformer with rectifier

resistance DC ammeter, DC voltmeter, T/B selector switch -1 set c) Indicating lamps Rupees One Lakh Seven

275 1.00 for fault communication ( Battery charger supply on, control on , engine running, low 107500.00 Thousand Five Hundred Only No.

oil pressure, high water pressure and engineer over speed) - ^ nos. push buttons for

starter, stop reset- 4 nos. e) selector switches ( engine control, mode selector)- 2 nos

. f) auxiliary rellays/ contractors / timer for driven pump battery charger shall be

taken separately. sequienence operating for starting and stopping of the engine-1 -g)

Hooter for audio alarm ( Industrial type) -1 no. Accessories for outgoing supply for

the mortars GI SWD earthling wire for the above mortar accessories for outgoing

supply for diesel engine: copper conductor armored cable 2.5 sq.mm of 12 core x

runs a ) battery 2 strans b) Engineer on/off 2 strands e) water temperature 2 strands

f) Spare 1 strand the cost of control panel shall also include necessary pressure

switches with necessary cabling & inter locked with the panel to enable sequential

operation of pumps. Including terrace mortar necessary earthling all the components

shall be housed in a common cubical, however, the feed cable for diesel engine

hydraulic allying operated sprinkler cabit valve with water meter gong bell and trims

as required, pressure gauges, drain valve, ball valve , check valve, strainers etc.

Supply, Installation and Testing of: Check Valve (Ball type or Swing type) with

necessary pipe fitments, hardware and consumables. MOC:-Body: Cast Iron (With Rupees Eleven Thousand Six

Flange Ends). Standard: ISI Marked. UOM:-Price Per Each No. Size: 150 mm Hundred Fifteen Only

Supply, Installation and Testing of: Check Valve (Ball type or Swing type) with

necessary pipe fitments, hardware and consumables. MOC:-Body: Cast Iron (With Rupees Nine Thousand Ninety

Flange Ends). Standard: ISI Marked. UOM:-Price Per Each No. Size: 100 mm Only

Supply, Installation and Testing of: Foot Valve (Ball type or Swing type) with

necessary pipe fitments, hardware and consumables. MOC:-Body: Cast Iron (With Rupees Nine Thousand Six

Flange Ends). Standard: ISI Marked. UOM:-Price Per Each No. Size: 150 mm Hundred NinetySix Only

Supply, Installation and Testing of: Foot Valve (Ball type or Swing type) with

necessary pipe fitments, hardware and consumables. MOC:-Body: Cast Iron (With Rupees Seven Thousand Five

Flange Ends). Standard: ISI Marked. UOM:-Price Per Each No. Size: 100 mm Hundred SeventyFive Only

Supply, Installation and Testing of: Y Type Strainer with necessary pipe fitments,

Rupees Twelve Thousand Six

280 2.00 hardware and consumables. MOC:-Body: Cast Iron, Mesh: SS-304. Working Pressure: 12625.00 No.

Hundred TwentyFive Only

10 Bar UOM:-Price Per Each No. Size: 150 mm

Supply, Installation and Testing of: Y Type Strainer with necessary pipe fitments,

Rupees Seven Thousand

281 1.00 hardware and consumables. MOC:-Body: Cast Iron, Mesh: SS-304. Working Pressure: 7070.00 No.

10 Bar UOM:-Price Per Each No. Size: 100 mm

Supply, Installation and Testing of: Pressure Gauge with Siphon Tube and Cock. MOC:-

4” Dial- Glycerin filled- Stainless Steel Body Pressure Gauge with GI Siphon Tube and Rupees One Thousand Eight

Brass Cock. Size:-Dial: 4” (100 mm) Range: 0 – 16 Bar (kg/cm2) UOM:-Price Per Unit Hundred Eighteen Only

Supplying and fixing2 way Fire Brigade service inlet of size 150 mm dia. with 2 No. 63mm

(2.1/2") size GM male outlets ( bronze male coupling) including metallic cover of mild

Rupees Five Thousand Six

283 10.00 steel and glass front, indicator plates,150mm BFV and schematic mimic diagrams on 5626.00 No.

Hundred TwentySix Only

metallic plate for easy operation as directed by Architect etc.complete to UGR.

Supply, Installation and Testing of: Electric Control Panel for Electric Motor Driven

Main Fire Pump and Jockey Fire Pump. Both pumps can be Start Automatically (by

Rupees EightyFive Thousand

284 1.00 Pressure Switch) or Manually. Design As per the Detail Specifications given. We will 85850.00 No.

Eight Hundred Fifty Only

provide Power Cable up to Pump Panel; Including Electrification work From Panel to

Pump. UOM:-Price Per Set.

Supplying and fixing 4 way Fire Brigade service inlet of size 150 mm dia. with 4 No. 63mm

(2.1/2") size GM male outlets ( bronze male coupling) including metallic cover of mild

Rupees Eight Thousand Nine

285 5.00 steel and glass front, indicator plates,150mm BFV and schematic mimic diagrams on 8927.00 No.

Hundred TwentySeven Only

metallic plate for easy operation as directed by Architect etc.complete to UGR.

SITC of Pressurized Air Vessel f Size 450 mm Dia x 2000 mm long fabricated from

Rupees Thirty Thousand

286 1.00 mm thick MS Plate with 25 mm drain valve, air release valve with ball valve on top 30300.00 No.

Three Hundred Only

and isolation valve.

Supply, Fabrication, Installation, Hydro Testing & Painting of Above Ground Pipe.

With necessary Pipe Fitments (Flanges, Bands, Socket etc.), MS

Rupees Two Thousand Seven

287 50.00 Support/Clamps/Hangers etc. Hardware (Gaskets, Nut-Bolts, Paint etc.), 2727.00 Mtr.

Hundred TwentySeven Only

Consumables (Welding Rod, etc.) and Labour Charge. Quality: GI, C-Class (Heavy).

UOM:-Price Per Running Meter Size: 150 mm

Supply, Fabrication, Installation, Hydro Testing & Painting of Above Ground Pipe.

With necessary Pipe Fitments (Flanges, Bands, Socket etc.), MS Rupees One Thousand Eight

288 80.00 Support/Clamps/Hangers etc. Hardware (Gaskets, Nut-Bolts, Paint etc.), 1878.60 Hundred SeventyEight Paise Mtr.

Consumables (Welding Rod, etc.) and Labour Charge. Quality: GI, C-Class (Heavy). Sixty Only

UOM:-Price Per Running Meter Size: 100 mm

Supply, Fabrication, Installation, Hydro Testing & Coating of Underground Pipe. With

necessary Pipe Fitments (Flanges, Bands, Socket etc.), Pypkote Pipe Coating (4 mm),

Hardware (Gaskets, Nut-Bolts, Paint etc.), Consumables (Welding Rod, etc.) and All Rupees One Thousand Nine

Civil Work like excavation, sand bedding, earth filling etc. as mentioned in the detail Hundred TwentyFive Only

specifications. Quality:GI , C-Class (Heavy). UOM:-Price Per Running Meter Size:

Supply, Fabrication, Installation, Hydro Testing & Coating of Underground Pipe. With

necessary Pipe Fitments (Flanges, Bands, Socket etc.), Pypkote Pipe Coating (4 mm),

Rupees Two Thousand One

Hardware (Gaskets, Nut-Bolts, Paint etc.), Consumables (Welding Rod, etc.) and All

290 100.00 2171.50 Hundred SeventyOne Paise Mtr.

Civil Work like excavation, sand bedding, earth filling etc. as mentioned in the detail

specifications. Quality: GI , C-Class (Heavy). UOM:-Price Per Running Meter Size:

Supply, Fabrication, Installation, Hydro Testing & Painting of Above Ground Pipe.

With necessary Pipe Fitments (Flanges, Bands, Socket etc.), MS

Rupees Two Thousand Seven

291 20.00 Support/Clamps/Hangers etc. Hardware (Gaskets, Nut-Bolts, Paint etc.), 2727.00 Mtr.

Hundred TwentySeven Only

Consumables (Welding Rod, etc.) and Labour Charge. Quality: GI, C-Class (Heavy).

UOM:-Price Per Running Meter Size: 150 mm

Supply, Installation and Testing of: Fire Hydrant Landing Valve with necessary pipe

fitments, hardware and consumables. MOC:-Body: CI, Working Parts:GUN METAL, Rupees Five Thousand One

Coupling: Stainless Steel (SS), Standard: -IS:5290. UOM:-Price Per Each No. Size:-63 Hundred FiftyOne Only

mm (Flange End: NB 75 mm, PCD 160 mm)

Supply, Installation and Testing of: Fire Hose with Hose Couplings. RRL (Type A) Fire

Hose. Hose Couplings: Stainless Steel. With SS Wire Binding. Standard: - As Per IS Rupees Three Thousand Five

Standard. UOM:-Price Per Each Set. Size:-63 mm dia x 15m long Hose. Hundred ThirtyFive Only

Supply, Installation and Testing of: Fire Hose Cabinet (Hose Box) suitable to

accommodate 02 no. of 15 m long fire hoses and 01 no. of nozzle. With Lock-n-key

Rupees Four Thousand One

294 6.00 facility. Wall Mounting Design. MOC: 16 Gauge MS Box with Powder Coating 4141.00 No.

Hundred FourtyOne Only

Standard: - As per Guidelines. UOM:-Price Per Each No. Size:-63 mm dia x 15m long

Hose. Size:- Suitable for 02 nos. of 15 m long hoses.

Supply, Installation and Testing of: Short Branch-pipe Nozzle. MOC: Red Powder

Rupees One Thousand Eight

295 6.00 Coated Aluminium. Standard: As Per IS Standard, Heavy Quality. UOM:-Price Per Each 1818.00 No.

Hundred Eighteen Only

No. Size:- 63 mm X 20 mm

Supply, Installation and Testing of: Fire Service Inlet with necessary hardware and

Rupees Twelve Thousand

consumables. MOC:-Body: Heavy-duty CI. Couplings/NRV: Gunmetal. Standard: -

296 2.00 12928.00 Nine Hundred TwentyEight No.

Made As per IS Standard- Heavy duty quality. UOM:-Price Per Each No. Size:-

Couplings: 63 mm, 150 mm E-table Flange End.

Supply, Installation and Testing of: Butterfly Valve with necessary pipe fitments,

Rupees Five Thousand Five

297 2.00 hardware and consumables. MOC:-Body: Cast Iron, Disk: SS, Seat: Nitrile. UOM:-Price 5555.00 No.

Hundred FiftyFive Only

Per Each No. Size: 150 mm

Supply, Installation and Testing of: Check Valve (Ball type or Swing type) with

Rupees Seventeen Thousand

necessary pipe fitments, hardware and consumables. MOC:-Body: Cast Iron (With

298 2.00 17372.00 Three Hundred SeventyTwo No.

Flange Ends). Standard: ISI Marked. UOM:-Price Per Each No. Size: 150 mm

Supply, Fabrication, Installation, Hydro Testing & Painting of Above Ground Pipe.

With necessary Pipe Fitments (Flanges, Bands, Socket etc.), MS Rupees Two Thousand Three

299 110.00 Support/Clamps/Hangers etc. Hardware (Gaskets, Nut-Bolts, Paint etc.), 2353.50 Hundred FiftyThree Paise Mtr.

Consumables (Welding Rod, etc.) and Labour Charge. Quality: GI , C-Class (Heavy). - Fifty Only

Price Per Running Meter Size: 150 mm

Supply, Fabrication, Installation, Hydro Testing & Painting of Above Ground Pipe.

With necessary Pipe Fitments (Flanges, Bands, Socket etc.), MS Rupees One Thousand Eight

300 220.00 Support/Clamps/Hangers etc. Hardware (Gaskets, Nut-Bolts, Paint etc.), 1878.60 Hundred SeventyEight Paise Mtr

Consumables (Welding Rod, etc.) and Labour Charge. Quality: GI , C-Class (Heavy). - Sixty Only

Price Per Running Meter Size: 100 mm

Supply, Fabrication, Installation, Hydro Testing & Painting of Above Ground Pipe.

With necessary Pipe Fitments (Flanges, Bands, Socket etc.), MS Rupees One Thousand Three

301 100.00 Support/Clamps/Hangers etc. Hardware (Gaskets, Nut-Bolts, Paint etc.), 1363.50 Hundred SixtyThree Paise Mtr.

Consumables (Welding Rod, etc.) and Labour Charge. Quality: GI , C-Class (Heavy)- Fifty Only

Class (Heavy). UOM:-Price Per Running Meter Size: 80 mm

Supply, Fabrication, Installation, Hydro Testing & Painting of Above Ground Pipe.

With necessary Pipe Fitments (Flanges, Bands, Socket etc.), MS

Rupees Five Hundred

302 100.00 Support/Clamps/Hangers etc. Hardware (Gaskets, Nut-Bolts, Paint etc.), 555.50 Mtr.

FiftyFive Paise Fifty Only

Consumables (Welding Rod, etc.) and Labour Charge. Quality: GI , C-Class (Heavy).

UOM:-Price Per Running Meter Size: 40 mm

Supply, Fabrication, Installation, Hydro Testing & Painting of Above Ground Pipe.

With necessary Pipe Fitments (Flanges, Bands, Socket etc.), MS Rupees Four Hundred

303 250.00 Support/Clamps/Hangers etc. Hardware (Gaskets, Nut-Bolts, Paint etc.), 424.20 TwentyFour Paise Twenty Mtr.

Consumables (Welding Rod, etc.) and Labour Charge. Quality:GI , B-Class (Heavy). Only

UOM:-Price Per Running Meter Size: 25 mm

Supply, Installation and Testing of: Fire Hydrant Landing Valve with necessary pipe

fitments, hardware and consumables. MOC:-Body: CI, Working Parts:GUN METAL, Rupees Five Thousand One

Coupling: Stainless Steel (SS), Standard: -IS:5290. UOM:-Price Per Each No. Size:-63 Hundred FiftyOne Only

mm (Flange End: NB 75 mm, PCD 160 mm)

Supply, Installation and Testing of: Fire Hose with Hose Couplings. RRL (Type A) Fire

Hose. Hose Couplings: Stainless Steel. With SS Wire Binding. Standard: - As Per IS Rupees Three Thousand Five

Standard. UOM:-Price Per Each Set. Size:-63 mm dia x 15m long Hose. Hundred ThirtyFive Only

Supply, Installation and Testing of: Fire Hose Cabinet (Hose Box) suitable to

accommodate 02 no. of 15 m long fire hoses and 01 no. of nozzle. With Lock-n-key

Rupees Four Thousand One

306 10.00 facility. Wall Mounting Design. MOC: 16 Gauge MS Box with Powder Coating 4141.00 No.

Hundred FourtyOne Only

Standard: - As per Guidelines. UOM:-Price Per Each No. Size:- Suitable for 02 nos. of

15 m long hoses.

Supply, Installation and Testing of: Short Branch-pipe Nozzle. MOC: Red Powder

Rupees One Thousand Eight

307 10.00 Coated Aluminium. Standard: As Per IS Standard, Heavy Quality. UOM:-Price Per Each 1818.00 No.

Hundred Eighteen Only

No. Size:- 63 mm X 20 mm

Supply, Installation and Testing of: Fire Hose Reel Set with necessary pipe fitments,

hardware and consumables. MOC:-Drum: 16 G Powder Coated MS, Hose: 19 mm X

Rupees Six Thousand Eight

308 10.00 m heavy-duty RUBER hose. Shut-off Nozzle: SS-304. With Control Valve: SS- 25mm 6868.00 No.

Hundred SixtyEight Only

Ball Valve. Standard:As Per IS Standard. Heavy Quality. UOM:-Price Per Each No. Type

1 Size:-19 mm dia x 30m long Hose.

Supply, Installation and Testing of: ABC Powder Fire Extinguisher necessary

hardware and consumables. Stored Pressure Mechanism. Charged with MAP-50 % Rupees One Thousand Two

(ABC) Dry Powder. With wall mounting clamp. Standard: -Confirming to IS: 15683- Hundred TwentyTwo Only

2006 with ISI Mark UOM:-Price Per Each No. Size:-6 kg Powder.

Supplying & erecting carbon dioxide (CO2) fire extinguisher user of following

Rupees Two Thousand Seven

310 20.00 capacity with necessary clamps made from 50 x 6 mm M.S. Flat with nut & bolts 2777.00 No.

Hundred SeventySeven Only

grouted in wall complete.[A] For 4.5 Kg Capacity

Supply, Installation and Testing of: Butterfly Valve with necessary pipe fitments,

Rupees Nine Thousand Ninety

311 5.00 hardware and consumables. MOC:-Body: Cast Iron, Disk: SS, Seat: Nitrile. UOM:-Price 9090.00 No.

Per Each No. Size: 100 mm

Supply, Installation and Testing of: Butterfly Valve with necessary pipe fitments,

Rupees Seven Thousand

312 5.00 hardware and consumables. MOC:-Body: Cast Iron, Disk: SS, Seat: Nitrile. UOM:-Price 7070.00 No.

Per Each No. Size: 80 mm

Supply, Installation and Testing of: Butterfly Valve with necessary pipe fitments, Rupees One Thousand Eight

313 5.00 hardware and consumables. MOC:-Body: Cast Iron, Disk: SS, Seat: Nitrile. UOM:-Price 1868.50 Hundred SixtyEight Paise Fifty No.

Per Each No. Size: 40 mm Only

Supply, Installation and Testing of: Butterfly Valve with necessary pipe fitments,

Rupees One Thousand One

314 5.00 hardware and consumables. MOC:-Body: Cast Iron, Disk: SS, Seat: Nitrile. UOM:-Price 1111.00 No.

Hundred Eleven Only

Per Each No. Size: 25 mm

Supply, Installation and Testing of: Check Valve (Ball type or Swing type) with

necessary pipe fitments, hardware and consumables. MOC:-Body: Cast Iron (With Rupees Nine Thousand Ninety

Flange Ends). Standard: ISI Marked. UOM:-Price Per Each No. Size: 100 mm Only

Supply, Installation and Testing of: Check Valve (Ball type or Swing type) with

necessary pipe fitments, hardware and consumables. MOC:-Body: Cast Iron (With Rupees Seven Thousand

Flange Ends). Standard: ISI Marked. UOM:-Price Per Each No. Size: 80 mm Seventy Only

Supply, Installation and Testing of: Check Valve (Ball type or Swing type) with

Rupees One Thousand Eight

necessary pipe fitments, hardware and consumables. MOC:-Body: Cast Iron (With

317 2.00 1868.50 Hundred SixtyEight Paise Fifty No.

Flange Ends). Standard: ISI Marked. UOM:-Price Per Each No. Size: 40 mm

Supply, Installation and Testing of: Check Valve (Ball type or Swing type) with

necessary pipe fitments, hardware and consumables. MOC:-Body: Cast Iron (With Rupees One Thousand One

Flange Ends). Standard: ISI Marked. UOM:-Price Per Each No. Size: 25 mm Hundred Eleven Only

Supply, Installation and Testing of: Air Release Valve Check Valve with necessary

Rupees Nine Hundred Nine

319 4.00 pipe fitments, hardware and consumables. MOC:-Body: Gunmetal / SS. UOM:-Price 909.00 No.

Per Each No. Size: 25 mm

Supplying Installing , testing and commissioning of approved make 15mm diameter

sprinkler bulb pendent/ wall mounted type designed to operated 68 degrees

centegrad make Tyco/HD Fire complete ( color code of bulb liquid inside glass bulb

type pendent as per IS 9972: 57 deg. C. orage , ^8 deg. - Red, 79de. C. -Yellow, 93 Rupees Three Hundred SeventyFive

deg.C.- Green, 141deg. C. - Blue, !82deg. C - Mauve, 227/260 deg.C.- Black)Make and Only

quality to operate at 68 degrees c.etc. complete. Note : If space between slab & false

ceiling is 800 mm & more, upright sprinklers to be provided by Contractor

SITC of: Conventional (semi-addressable) type Fire Alarm Control Panel for 10 Rupees TwentyEight

321 2.00 Zone.With Battery Backup. 28280.00 Thousand Two Hundred No.

With re-settable glass (No need to replace the broken glass). Rupees Nine Hundred Nine

Conventional Sounder (Hooter) With Strobe (Flash Light). Rupees One Thousand Five

Hundred Fifteen Only

Supply, Laying and End Termination of 2 core X 1.5 sq. mm. Copper Conductor Fire Rupees One Hundred

324 120.00 Resisting Cable with require Accessories and Consumables. 121.20 TwentyOne Paise Twenty No.

APPROVAL FIRE SYSTEM FROM FIRE AUTHORITY

Rupees SeventyFive Thousand

325 1.00 Getting of Fire Fighting System Approval from local fire authority with all other charges 75750.00 JOB

Seven Hundred Fifty Only

and documentations for getting No Objection Certificate.

Providing and Fixing Greenguard Certificate High Back Chair Providing Revolving

Chair of size 760mm W x 760mm D x 970-1090 mm H. The seat & back made from

1.2cm thick hot pressed plywood and upholstered with frabic and moulded

polyurethane foam. The back foam is deigned with contoured lumber support for

extra comfort. The Seat Size: 470mm W X 480mm D and Back Size 470mm W x

695mm H. The HR polyurethane foam is moulded with density of 45 +/- 2 kg per

meter cube and hardness load of 16 +/- 2 kgf as per IS 7888 for 25% Compression.

Rupees Six Thousand Four

326 15.00 The Armerest should be of one-piece armrest are fitted to the seat are injection 6419.00 NOS

Hundred Nineteen Only

moulded black copolymemer. There should be a synchrnous tilt mechanism designed

with 360 degree revolving type and upright locking. There should be gas lift having

Height adjustment of stroke of 120mm. Below should have 3 piece telescopic type

and injection moulded in black Polypropylene. The ped should be injection in black

30% glass-filled nylone and with 5 twin wheel castors in injection moulded type of

balck nylon. The ped of 660mm +/- 5mm pitch-center dia.

Supplying and placing of fully motorized ICCU bed with head,leg board and side

board with pull down mechanism. All the functions are operated by

electromechanical actuators. 2206L x 1010W x 450 to 825 H mm Base Frame made

up of ERW tube with Rect. section of 30 x 60 mm with 1.2 mm thickness Bed Frame

made up of ERW tube with Rect. section of 50 x 25 mm and 40 x 20 mm with 2 mm

thickness Linkages made up of ERW tube with Rect. section of 50 x 25 mm with

mm thickness Electromechanical actuators – Noiseless, Smooth Operation, imported

actuators. CPR Lever, 30% Gas filled nylon, Used to move down backrest during CPR

treatment. leg elevation ratchet MS Zinc plated. Hettich make ratchet used to move

up lower leg rest frame. Bumper neoprene for shock absorbing. Lying surface frame

ERW oval tube with rect. Section 40 x 16 mm with 1.6 mm thickness Side Board

made of PP molding with microbial additives for drop down mechanism with

compressed dampener for easy movement and push fit feel. Completely collapsible to

achieve zero transfer gap. Lying surfaces. ABS Vacuum Form with anti microbial Rupees One Lakh Four

327 2.00 properties. Easy removal and easy cleaning for maintaining hygiene. Integrated 104500.00 NOS

Thousand Five Hundred Only

mattress retainer feature. X-ray Cassette holder. Compact laminate thickness 6 mm.

It is a mechanism with the provision of variable size cassettes and variable position

for the ease of operation. Head and leg board. PP molding antimicrobial additives

with 3 mm thickness. Plastic injection molded castors and provided with total lock

and directional locking arrangement. Wheel dia 125 mm. Twin wheel castors. Patient

lifting pole holder, IV pole holder made up of nylon for the respective arrangement.

Linen tray for putting linen made up of MS chrome plated with dia 8mm. Urine bag

made up of MS Chrome plated with dia 6 mm. Adjustable IV pole Anti backrest

compression which helps in keeping compression while moving the backrest. Auto

countering function is provided in handser in which the backrest and largest move

simultaneously Attendant control panel allows nursing staff to retain direct control

over critical positioning functions by giving the patient a limited degree of

adjustment. Antimicrobial and thermosetting epoxy polyester, formulated to fulfill

the requirements of bacterial protection. Maximum safe working load 300kg

Providing and Fixing Office Table 1500 x 750 x 740 mm H Worktop Made from

mm Thick Pre-laminated Particle board. All the edges are sealed with 2 mm thick PVC

edge band all around, Side Panels Made from 25 mm Thick Pre-laminated Particle

board. All the edges are sealed with 2 mm thick PVC Edge band on the user side and

0.8 mm on the Top and Bottom Side. The side panels have 2 glide screws each for

leveling of the desk. Modesty Panel Made from 18 mm Thick Pre-laminated Particle

board. All the edges are sealed with 0.8 mm thick PVC edge band all around

Rupees Eight Thousand Six

328 15.00 Freestanding Pedestal The freestanding pedestal is made from 18 mm Pre-laminated 8665.00 NOS

Hundred SixtyFive Only

Particle board with a combination of 2mm and 0.8 mm PVC Edge band on all the

exposed surfaces as per requirement. The drawers are provided with suitable slides

for smooth operation. All the pedestal drawers are centrally locked with a single key.

The entire desk unit is assembled with suitable KD fittings and hardware. Each side

panel is provided with a cutout for laying cables for the monitor and other computer

Supplying and placing of stool with Overall Dimension:Diagonal Leg Dia 538 mm H470

min-655max. Top plate:SS 304 made sheet with spin section of thickness 1mm & should

be non corrosive. It should have a diameter of 305mm, Seat base:seat base is made of MS

ring and rectangular tube.

Screw:EN8 Screw having dia of 22 mm should be used for height adjustment of the seat

base. Round Hub:The hub should be made of MS ERW tube having dia of 38mm and

Rupees One Thousand

329 30.00 thickness 2 mm. The Hub should be welded with the legs and it should accommodate 1022.00 NOS

and cover the lead screw mechanism. Leg Powder coating:All metal components should

be pre treated with zinc phosphating in 9 tank process and then powder coated with anti

microbial epoxy polyester powder coating . All welding should be Co2 argon welding to

minimize rusting on the welding areas.

Working load:Safe working load must be 135kg

Ward Care Bed Delux (Plain Bed) (I.C. 7500) (1900mmL X 91OmmW X 61OmmH .)

Providing & Supplying a Ward Care Bed Frame work of specially designed CRC

rectangular heavy tube. machine pressed CRC sheet top with proper support. SS

Rupees Seven Thousand Five

330 25.00 head & foot bows with laminated panels. Four side saline arrangement location L.eg 7500.00 NOS

fitted with shoes. Pretreated & Powder coated. Selection as per Engineer-In-Charge

etc. completed. including mettress quality approved by EIC

Single Step stool is to be made of ERW square tube.Textured and Rubber mat is to be

provided, of 20mm X 20mm size. Tube 1.2 mm thick and mat

3.0 mm thick Size:485(L) x 335 (W) X 210 (H) Step stool is to be made of MS square tubes,

is to be strong and firm. Top is to be made of textured rubber offering firm grip for

climbing Frame:It should be made up of MS 19mmX19mm section of thickness 1.2 mm.

Stool top:stool top should be made up of MS of thickness1.2mm. Rubber mat:steps

should be provided with rubber Mat which is made of natural rubber of thickness

3.2mm. Maximum weight:maximum safe work load should be 135 kg. welding:To ensure Rupees One Thousand Three

331 5.00 qood quality welding " Co2 Argon" process should be adhered to. powder coating:All

Hundred TwentySix Only

metal components should be pre treated with zinc phosphating in 9 tank process and

then powder coated with anti microbial epoxy polyester powder coating .packing:goods

should be supplied in knocked down construction to reduce carbon emission. In house

test report proof:loading test , cycle tests , impact test. Certifications:The manufacturer

should compliant with ISO 9001, 14001, 13485 & OHSAS 1800 and CE certification.

Supplying and placing of fowler bed SS: Overall Sizes(L)2158 mm X ( W)915 mm X

(H) 560 mm. It should be a two function bed which have adjustable backrest and

upper leg rest.It should have fixed height of 560 mm. Bed FrameMS ERW RECT Tube

and MS ERW Round tube should be made of 30mm X60mm and Ø 25.4 mm Section

respectively of 1.6mm thickness." Under Structure should have a high diameter tube

which should provide a sturdy understructure." Lead Screw: Thread Rolled En8 Lead

Screw, with ACME threads and 6mm pitch should give good strength, with ease of

operation." Handle: Snap locking Handle lever of PPCO with handle body keep it in

folding position when not in use." Head Board & Leg Board: made of SS 304 Tube

bow, SS Sheet & PLT Ø31.75 mm tube1.2 mm thk.tube ,18mm thk. Board Head / Leg

Board should be made of a bent SS tube on the periphery & a PLT panel in the centre.

Rupees Nineteen Thousand

332 15.00 Lying surface area should be 1 mm thick, made of CRCA consists of mattress retainer 19946.00 NOS

Nine Hundred FourtySix Only

to define the position of the mattress. 125 mm dia, high endurance plastic injection

molded two lockable & two non lockable castors to be used. Finish Specifications:All

metal components should be pre treated with zinc phosphating in 9 tank process and

then powder coated with anti microbial epoxy polyester powder coating.1. All

powder coated parts in RAL white. 2. Other plastic parts in Pantone Cool Grey 8C.

Head / Leg board SS tubes with buffed mirror finish. 4. User instruction stickers in

Pantone Cool Grey 8C." Performance Specifications: Maximum patient load should be

135 kg. Backrest Elevation 70°±2. Knee Rest Elevation 24°±2. Packing goods should

be supplied in knocked down construction to reduce carbon emission.

Supplying and Placing Instrument Trolley with Bowl & Bucket with Overall Dimension is

1232mm X 531mm X 915mm H. SS 304 sheet is provided at top for the placement of the

instruments being used & also for easy portability.SS 304 sheet is provided at the top as

well as bottom shelf for keeping the instrument being used. Horizontal bars is welded

with legs to provide protection at sides with supporting legs for sturdy structure.

Rupees Thirteen Thousand

333 4.00 Castors of 125mm Dia. are to be used for easy in movement. Spin section is provided to 13765.00 NOS

Seven Hundred SixtyFive Only

the bowl giving a aesthetic look & also bucket has to be provided with removable lid & a

handle to lift the bucket. Maximum safe working load is approxx 40kg.

supplying and placing of three fold partition screen. It should be portable screen on

castors having three screens which is used to provide privacy in recovery ward

2637L mm x 640W mm x 1720H mm Fixed Frame made up of ERW tube with section

dia of 25.4 mm with 1.2 mm thickness which is used to provide hinging to movable

frame Movable Frame made up of ERW Tube with dia of 19.05 mm with 1.2 mm Rupees Three Thousand Two

thickness. Flexible frame has plastic hinge. It can be adjusted in provided space. Leg Hundred SixtyFive Only

Frame made up of ERW tube with square section of 30 mm with 1.6 mm thickness.

Castors wheels of dia 50 mm are provided for ease of movement. Casement fabric for

screen which is opaque for providing modesty.

Supplying and Placing medicine trolley with overall dimension: - 902(L) X 532(B) X 915(H)

mm. Top shelf & bottom shelf is made of SS304 sheet with 1mm thickness & 1.2mm. Rest

of the components like supporting legs, horizontal bar handle is made of SS 304 pipe Rupees Eleven Thousand

335 3.00 having dia 31.8, 12.7 mm respectively. The castors is of high quality plastic injected 11725.00 Seven Hundred TwentyFive NOS

molded, & the static having the dia of 125mm.Handles is made of SS 304 pipe having Only

section of 16mm & thickness of 1.2mm.

Supplying and placing of bed side Locker with overall dimensions (L)490 mm X (

W)410 mm X (H) 941mm. Locker should have one cabinet with lock and one drawer

unit with plastic molded handle. There should be a space between the drawer unit

and cabinet, to keep the general items for frequent use. Cabinet should be provided

with lock to keep the valuable items for safety. Drawer unit is without a lock to keep

the general items. Castors are provided for easy handling. Corner Tube should be

made of MS ERW round tube Ø 25.4mm and 1.2 mm thickness Drawer should be

made of CRCA sheet Sliders: Telescopic ball slides are used for easy and smooth

Rupees Four Thousand Two

336 30.00 operation of the drawer. Cabinet: Cabinet should be provided with a lock. Tops made 4287.00 NOS

Hundred EightySeven Only

of ABS should have recessed and contoured shape for better aesthetics and usability.

Knob: Matt finish plastic knob with generous radii - and dome shape for better grip.

Castors: Ø50mm Plastic molded castor for better leveling and strength. Powder

coating should be Bacteriostatic and thermosetting epoxy polyester,formulated to

fulfill the requirements for bacterial protection. All powder coated parts in RAL

white. Plastic parts in Grey 5 kg UDL each on Top, on First Drawer and on Mid Shelf.

10 kg UDL in Cabinet.

Supplying and placing of Examination table with overall Size (L)1957mm X (W)625

mm X (H)808. Examination table should have gas-lift assist to beted head rest with

continuous adjustment from 0° to 30°.The design focuses on ease of operation,

hygiene, doctor and patient ergonomics, and aesthetics. Homogeneous soft forms

with rounded edges evoke feeling of comfort and safety. Mattress and Upholstery is

to be made with PU molded foam with density 50-55, of 625mm x 65mm section, of

23 mm thickness. Mattress is to be projecting out from the understructure to provide

soft touch from all sides. Seamless upholstery is to be provided to avoid spread of

bacteria Head Rest is to be made of PU molded foam with density 50-55, Section is to

be made of 625mm x 65 mm. Thickness is to be 23 mm. Gas-lift assist to beted head

rest with continuous adjustment from 0° to 30°. Understructure and top frame is to

be made of of ERW square tube , section 30mm X 30mm and 1.6 mm. Understructure

is to be made of MS square tubes with unique styling that provides better strength

and stability. It is to be provided to reduce clutter and offers better access and reach Rupees TwentyFour

337 5.00 Top Drawer Unit is to be provided, made of CRCA sheet construction with SS handle 24400.00 NOS

Thousand Four Hundred Only

and SS hinge. Sheet thickness 1.2 ,0.8 and 0.6. Two drawers at top; each of volume

510 x 334 x 95 mm are provided with bottom cabinet CRCA sheet construction with

SS handle and SS hinge Ø 10 for handle sheet lockable hinge door at bottom to keep

additional important items. BP Apparatus tray: CRCA sheet construction with SS

handle and SS hinge Dia 10 for handle. Sheet thickness 1.2 ,0.8 and 0.6. swivel tray is

to be designed for BP Apparatus that should be concealed when not in use SS Handle:

SS 202 Dia 10 - Aesthetically designed handles are placed in such a way that to give a

unique look also provide wider space for griping to users. Ergonomics: Increased

width of the table (625mm) to give better comfort for patients. Optimized height

(808mm) of the table for comfortable observation and reach. Tapered shape is to be

provided to give a unique look and better access for doctor. L-shape leg is to be

provided for better stability. Single Step stool is to be made of ERW square tube.

Textured and Rubber mat is to be provided, of 20mm X 20mm size. Tube 1.2 mm

thick and mat 3.0 mm thick Size:485(L) x 335 (W) X 210 (H) Step stool is to be made

Supplying and Placing Instrument Trolley with Bowl & Bucket with Overall Dimension is

1232mm X 531mm X 915mm H. SS 304 sheet is provided at top for the placement of the

instruments being used & also for easy portability.SS 304 sheet is provided at the top as

well as bottom shelf for keeping the instrument being used. Horizontal bars is welded

with legs to provide protection at sides with supporting legs for sturdy structure.

Rupees Thirteen Thousand

338 3.00 Castors of 125mm Dia. are to be used for easy in movement. Spin section is provided to 13765.00 NOS

Seven Hundred SixtyFive Only

the bowl giving a aesthetic look & also bucket has to be provided with removable lid & a

handle to lift the bucket. Maximum safe working load is approxx 40kg.

Supplying and Placing Mayo Trolley with overall sizes of Base rectangle 504mm X 650mm

X Adjustable from 814mm to 1340mm. Height adjustment will be achieved with screw

knob mechanism. Bottom frame is made of 1.2mm thick SS 304 tube of dimension 38 x

38mm square tube. Top frame is of 1.2mm thick & 304 SS grade rectangular shape of

dimension 30 x 30mm. Fixed tube of 3 mm thickness square in shape of 38 x

339 4.00 38mmtelescopic tube is of 2 mm thickness rectangular in shape of 30 x 30mm. Locking 4000.00 Rupees Four Thousand Only NOS

knob is ergonomically designed made of SS screw & nylon knob. Tray supporting frame is

of thickness of 1mm. Castors is injection molded type of 50mm dia having high

endurance, anti-static properties. Safe working

Supplying and Placing Folding Wheel Chair with Overall dimension: (L) 790 x (W)

600 x (H) 870mm Frame structure Foldable frame structure is made of section

22x1.2mm A3 carbon steel with chrome finish. Cross bar are made of A3 carbon steel

with section 25.4 x 1.2mm. Rear wheel 24 inch Solid mag wheels with alloy in the rim

Hand rim Integrated hand rim provide to drive the wheel chair of section 16x1.2mm

A3 carbon steel with chrome finish Front wheel 8 inch HUB made of PA polymer and

outer with solid rubber Arm rest PU molded arm rest & base is made of ABS for Rupees Four Thousand Seven

better arm support Calf rest & seat Leatherette strap for calf rest & leatherette Hundred Ninety Only

cushion for seat Footrest Adjustable alluminimum die cast foot rest with updown &

swivel type mechanism Push handle Handles are made of moulded rubber grip to

push the wheelchair Brakes Hand brakes are provided to lock the wheelchair at

desired location. Foot press Extended base with molded plastic for better grip Finish

Anti rust chrome finish safe working load 100kg.

Supplying and placing of Stretcher with overall

dimensions:2005mm(L)X666mm(W)X827mm(H): trolley:The trolley should be made of

25.4 mm dia 1.6 mm thick ERW tube. Holder for stretcher:hollder for stretcher should be

made up of mild steel. Castor wheel:Castor should be of 200 mm dia , diagonal locking

castor. stretcher:stretcher should be made up of ERW tube of dia 25.4 mm and

thickness 1.6 mm. stretcher top sheet:Top sheet should be made of CRCA sheetof

thickness 1.2 mm with contour shape to accommodate patient. provision for IV pole

holder should be there. Maximum patient load:Maximum safe work load should be 135 Rupees Eleven Thousand One

341 3.00 kg. welding:To ensure qood quality welding " Co2 Argon" process should be adhered to. 11100.00 NOS

powder coating:All metal components should be pre treated with zinc phosphating in

tank process and then powder coated with anti microbial epoxy polyester powder

coating. packing:goods should be supplied in knocked down construction to reduce

carbon emission. In house test treport proof:loading test , cycle tests , impact test, salt

spray test, castor break test, Certifications:The manufacturer should compliant with ISO

9001, 14001, 13485, OHSAS 1800 and CE certification.

Supplying and placing of Gynaec Examination table with Overall Size (L)1954 mm X

(W)710 mm X (H)810. Material Specifications 3-section Mattress platform is to be

made with Upholstery of PU molded foam with density 50-55; Section 625mm x

mm; thickness 23 mm.Matress top should have 3 separate section of Backrest,Pelvic

and Leg rest.Mattress is to be projecting out from the understructure to provide soft

touch from all sides. Seamless upholstery is to be provided to avoid spread of

bacteria. Backrest is to be made of PU foam & Upholstery backed by ply, made of

section 880mmx 625 mm x 65 mm; of 23 mm thickness. Gas-lift assist to beted

backrest is to be provided with continuous adjustment from 0° to 60°. Pelvic section

with trapezoidal cutout, is to be made of PU foam & Upholstery backed by ply, and is

to be made of section 530mmx 625 mm x 65 mm. It is to be made of 23 mm

thickness. This to be fixed top with trapezoidal cutout as per the human

anthropometry. Leg rest section with Fold down mechanism, is to be made of PU

foam & Upholstery backed by ply, and is to be made of section 530mmx 625 mm x 65 Rupees TwentySix Thousand

342 2.00 mm. It is to be made of 23 mm thickness. Leg rest is to be provided to rest the lower 26425.00 Four Hundred TwentyFive NOS

leg during normal examination. Leg rest section should have the fold down Only

mechanism to keep it in folded position as per convenient of doctor and patient.

Under Structure and top frame is to be made of ERW square tube of Section 30mm X

30mm, of thickness 1.6 mm. Understructure made of MS square tubes with unique

styling that provides better strength and stablity.It reduces the clutter and offers

better access and reach BP Apparatus tray made of CRCA sheet construction with SS

handle and SS hinge Dia 10 for handle sheet thickness 1.2 ,0.8 and 0.6. A swivel tray is

to be designed for BP Apparatus that should be concealed when not in use. BP

Apparatus tray made of CRCA sheet construction with SS handle and SS hinge Dia

for handle sheet thickness 1.2 ,0.8 and 0.6. The handles are placed in such a way that

to give a unique look also provide wider space for griping to users. In Built SS

Collection Tray Frame of SS 304 should be slide in and out below the understructure

as per the need.Tray should be completely hide below the structure while not in

use.In Built SS Collection Tray Frame of SS 304 should be slide in and out below the

Supplying and placing of Oxygen cylinder trolley mounted in castors with over all

sizes (L)410mm X (W)375mm X (H)1112mm. Main frame for holding the cylinder

consists of M.S ERW tube having section dia 25.4mm and thickness 1.6 mm. Locking

rod for cylinder positioning consists M.S rod of dia 10mm. Base frame for giving

Rupees One Thousand Four

343 5.00 sturdy base for the resting of cylinder consists of M.S ERW tube having section dia 1427.00 NOS

Hundred TwentySeven Only

25.4 X 25.4 mm and thickness 1.6mm. Castor wheel made of PU having dia 100 mm

and thickness 25mm. Leg cap made of LDPE. Metal fabrication in ral white, epoxy

polyester powder coating plastic parts in pantone cool grey 8c.

Supplying and placing of IV pole made of SS tubes with 2 saline hooks at top end. It

has a adjustable height. Bottom adapter has 12.8mm thickness with MS type. Fixed

Rupees One Thousand Three

344 30.00 height SS 304 tube with section 19mm dia & thickness of 1.63mm is used. Hook of 1326.00 NOS

Hundred TwentySix Only

8mm dia insert molded plastic hook arm is used for saline bag holding. Non corrosive

with good aesthetics hooks to be used.

Supplying and placing in position steel cupboards made from 18 gauge CRCA sheets with

anticorrosive treatment ,rigid knockdown constructions with steel hinged doors and

way locking mechanism with die cast handle-cum-cam lock. Shelves : Adjustable two Rupees Sixteen Thousand

345 18.00 shelves 16000.00 NOS

having middle support, full length recessed handle and central locking . Size

Supplying and Placing of Pediatric bed with overall size – 1570L x 839W x 1218H.

Description – Pediatric Sheet bed is a plain bed used in recovery ward for children.

Material specifications Head and Foot board made up of ERW Tube with Section dia

15.88mm and 1.2 mm thk, dia Rupees Six Thousand One

346 5.00 31.75mm and 1.6mm thk, dia 25.4mm and 1.2 mm thk. Side Rail of ERW tube dia 19.05 6187.00 NOS

Hundred EightySeven Only

and 1.2 mm thick which is provided for full side protection. Top Sheet made up of CRCA

sheet 1.2 mm thick. Powder coating of epoxy polyester.Maximum Patient load of 100 kg.

Supplying and placing of Crib on trolley .. Overall Dimension:L908mm x W 416mm x

H 784mm.Bed frame should be ERW tube of section

25.4mm and 15.88mm diameters and thickness 1.6mm and MS rod of dia 8mm and

Rupees Five Thousand Two

347 3.00 5mm. Crib made of ERW tube of dia 16mm and MS rod of dia 5mm and 8mm of wire 5200.00 NOS

mesh structure providing visibility and ventilation to the baby. Epoxy polyester

powder coating. Colour:RAL white and plastic parts in pantone cool grey maximum

safe working load:20kg

Supplying & Stacking of Tubular section of Stainless steel storage Rack of size

Rupees Ten Thousand One

348 10.00 1200mm(width) X 600mm (Depth) & 1800mm height frame of 304 grade steel.etc. 10147.00 NOS

Hundred FourtySeven Only

WAITING CHAIR 3 SEATER SIZE:-1750x660x750mm:Providing and supply

Rupees Sixteen Thousand Five

349 10.00 WAITING CHAIR 3 SEATER, Material superior with crome handle + legs.(Lobby + 16500.00 NOS

waiting chairs )

WAITING CHAIR 2 SEATER SIZE:-1200x660x750mm :Providing and supply

Rupees Twelve Thousand Five

350 5.00 WAITING CHAIR 2 SEATER, Material superior with crome handle + legs.(Lobby + 12500.00 NOS

waiting chairs )

NURSING STATION SIZE - 4500 X 900 X 1050 MM as per EIC Rupees FourtySeven

Medical Grade Copper Pipe : 42mm OD X 1.2mm thick etc. complete As per drawings Rupees One Thousand Two

and design supplied by architect and instruction given by authority and E.I.C. Hundred FourtyTwo Only

Medical Grade Copper Pipe : 28mm OD X 0.9mm thick etc. complete As per drawings Rupees Seven Hundred

and design supplied by architect and instruction given by authority and E.I.C. TwentyOne Only

Rupees One Thousand Two

Medical Grade Copper Pipe : 22mm OD X 0.9mm thick etc. complete As per drawings

354 100.00 1242.30 Hundred FourtyTwo Paise MTRS

and design supplied by architect and instruction given by authority and E.I.C.

Rupees Seven Hundred

Medical Grade Copper Pipe : 15mm OD X 0.7mm thick etc. complete As per drawings

355 110.00 797.90 NinetySeven Paise Ninety MTRS

and design supplied by architect and instruction given by authority and E.I.C.

SITC of Gas Outlet Points/ Terminal Unit : As per tender technical specifications HTM

02-01 , DIN, ISO-7396-1, NFPA -99 latest edition Gas Outlet Points/ Terminal Unit : Rupees Five Thousand Four

As per tender technical specifications Oxygen etc. complete As per drawings and Hundred FiftyFour Only

design supplied by architect and instruction given by authority and E.I.C.

Gas Outlet Points/ Terminal Unit : As per tender technical specifications . Nitrous

Rupees One Thousand Four

357 10.00 Oxide etc. complete As per drawings and design supplied by architect and instruction 1454.00 NOS

Hundred FiftyFour Only

given by authority and E.I.C.

Gas Outlet Points/ Terminal Unit : As per tender technical specifications Medical Air

Rupees One Thousand Five

358 10.00 4 Bar etc. complete As per drawings and design supplied by architect and instruction 1554.00 NOS

Hundred FiftyFour Only

given by authority and E.I.C.

Rupees Five Hundred

359 30.00 Gas Outlet Points/ Terminal Unit : As per tender technical specifications Vacuum 521.00 NOS

Matching Probe/adopter As per tender technical specifications Nitrous Oxide etc.

Rupees Seven Hundred Seven

360 17.00 complete As per drawings and design supplied by architect and instruction given by 707.00 NOS

authority and E.I.C.

Matching Probe/adopter As per tender technical specifications Medical Air 4 Bar

Rupees Seven Hundred Seven

361 24.00 etc. complete As per drawings and design supplied by architect and instruction given 707.00 NOS

by authority and E.I.C.

Matching Probe/adopter As per tender technical specifications Vacuum etc.

Rupees Nine Hundred

362 3.00 complete As per drawings and design supplied by architect and instruction given by 969.60 MTR

SixtyNine Paise Sixty Only

authority and E.I.C.

Medical gas hose assembly as per technical specifications Vacuum etc. complete As

Rupees Seven Hundred

363 30.00 per drawings and design supplied by architect and instruction given by authority and 767.60 MTR

SixtySeven Paise Sixty Only

Low Flow Silicon suction tubing etc. complete As per drawings and design supplied Rupees FourtyTwo Thousand

by architect and instruction given by authority and E.I.C. Four Hundred Twenty Only

SITC INTEGERATED VALVE BOX AND AREA LINE PRESSURE ALARM - 2 GAS

SERICES : As per tender technical specifications HTM 02-01 , DIN, ISO-7396-1

Rupees SixtyFive Thousand

365 2.00 ,NFPA -99 latest edition 65650.00 NOS

Six Hundred Fifty Only

As per drawings and design supplied by architect and instruction given by authority

SITC of Fully Automatic Oxygen Control System 2000 LPM As per tender technical

Rupees Nine Lakh FourtyFour

Specifications.HTM 02-01 , DIN, ISO-7396-1 ,NFPA -99 latest edition etc. complete As

366 1.00 144350.00 Thousand Three Hundred SET

per drawings and design supplied by architect and instruction given by authority and

SITC of Oxygen Manifold (2x10) : As per tender technical specifications.HTM 02-01 , Rupees Five Lakh FourtyEight

367 1.00 DIN, ISO-7396-1 ,NFPA -99 latest edition etc. complete As per drawings and design 48430.00 Thousand Four Hundred SET

supplied by architect and instruction given by authority and E.I.C. Thirty Only

SITC of Emergency Oxygen Supply System (2X5 ) : As per tender technical

Rupees One Thousand Eight

Specifications.HTM 02-01 , DIN, ISO-7396-1 ,NFPA -99 latest edition etc. complete As

368 30.00 1868.50 Hundred SixtyEight Paise Fifty NOS

per drawings and design supplied by architect and instruction given by authority and

SITC of Oxygen Flow meter with Humidifier Bottle - As per tender technical

specifications HTM 02-01 , DIN, ISO-7396-1 ,NFPA -99 latest edition etc. complete As Rupees Two Thousand Four

per drawings and design supplied by architect and instruction given by authority and Hundred FiftyFour Only

SITC of Vacuum Unit .As per tender technical specifications HTM 02-01 , DIN, ISO-

Rupees Two Nine Thousand

370 1.00 7396-1 ,NFPA -99 latest edition etc. complete As per drawings and design supplied by 29490.00 NOS

Four Hundred Ninety Only

architect and instruction given by authority and E.I.C.

Theatre Suction Unit : As per tender technical specifications HTM 02-01 , DIN, ISO-

Rupees Three Thousand Four

371 1.00 7396-1 ,NFPA -99 latest edition etc. complete As per drawings and design supplied by 3434.00 NOS

Hundred ThirtyFour Only

architect and instruction given by authority and E.I.C.

SITC of Isolation Lockable line valves :As per technical specifications.HTM 02-01

DIN, ISO-7396-1 ,NFPA -99 latest edition

Rupees Four Hundred Forty

372 2.00 Isolation Lockable line valves :As per technical specificationsa etc. complete As per 449.00 NOS

drawings and design supplied by architect and instruction given by authority and

Isolation Lockable line valves :As per technical specificationsa etc. complete As per

Rupees Five Hundred Sixty

373 3.00 drawings and design supplied by architect and instruction given by authority and 561.00 NOS

Isolation Lockable line valves :As per technical specificationsa etc. complete As per

Rupees One Thousand One

374 2.00 drawings and design supplied by architect and instruction given by authority and 1110.00 NOS

Hundred Ten Only

Isolation Lockable line valves :As per technical specificationsa. etc. complete As per

Rupees One Thousand Four

375 1.00 drawings and design supplied by architect and instruction given by authority and 1494.00 NOS

Hundred Ninety Four Only

TOTAL AMOUNT (CIVIL+ELECTRIC)

TOTAL AMOUNT (CIVIL+ELECTRIC)

( 1) I/We am/are Willing to carry out the work at ..................... % above/below percent (should be written in figures and words) of the estimated rates mentioned above.

(2) There for our final value of tender works out as under.

* Estmated amount Put to tender Rs........... * Estmated amount Put to tender Rs...........

Tender Value Rs.......... Tender Value Rs..........

Net Value of tender Rs………………………………. Net Value of tender Rs……………………………….

Note 1 :- All work shall be carried out as per Public Works Department Handbook and other specifications of divisions or as directed.

Note 2 :- All the columns in Schedule should be filled in ink and the total of the enteries in the last colummn should be stuck by the contractor under his signaure

Note 3 :- Rate quoted includ clearence of site ( prior cmmencement of work at its close ) in all respects and hold good for work under all cinditions, site, moisture, weather, etc.

Note 4 :- To be continued on additional sheets, if found necessary.

Note 5 :- Power Supply connection Charge for 3 Phase Connection Payable to Contractor as a Fixed Charge (Actutal as per MGVCL Demand note will be Payable)

Note 6 :- GST at 2% Value of Workdone shall be Recovered from Contractors Bill

Note 7:- Contractor shall give details of his GST No. while submitting tender.