Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L 1₹8.9 CrAccepted-AOC R O VILLAGE GOPAL CHOWK PO MAHADEV TEHSIL SUNDERNAGAR DISTRICT MANDI HP 175018 | MANDI | HIMACHAL PRADESH | 175018 | ₹8.9 Cr | L 1 | Accepted-AOC Being 1st lowest bidder |
| 2 | L2₹9.5 Cr+₹54.6 L (6.12%)Rejected-Finance HIMACHAL PRADESH HP | KINNAUR | HIMACHAL PRADESH | 172101 | ₹9.5 Cr+₹54.6 L (6.12%) | L2 | Rejected-Finance L2 Bidder |
| 3 | Rejected-Technical PANCHKULA | PANCHKULA | HARYANA | 133301 | - | - | Rejected-Technical Non Responsive |
Tender Value
₹9.1 Cr
EMD Value
₹18.2 L
Closing Date
17 Jul 2026, 5:00 pmClosed
Er. JK Gupta
SE 6th Circle HP.PWD, Kullu
SH C/O Sub-Structure Super Structure and both side bridge approaches under NABARD-RIDF-XXXI.
2026_PWD_138302_1
No.3098-3148 dated 04.07.2026
Open Tender
Civil Works - Bridges
Percentage
365 days
Kullu
As per refer to bid documents
9 documents required · 9 mandatory
₹10,000
Yes
₹18.2 L
9 Sept 2026
8 Jul 2026
18 Jul 2026
8 Jul 2026
17 Jul 2026
8 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in excavation of foundation for structures for bridge in all depths as per drawing and MoRTH technical specification section 300 and clause 304 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal in all leads and lifts including dressing of sides and bottom and back filling in trenches with excavated suitable materials. All work of rock cutting by blasting shall be carried out by taking all necessary precautions against soil erosion damage to hill side water pollution etc. and to protect stability of hill side rock shall be excavated with chiselling and wedging out rock (where blasting is prohibited). All earth work in cutting/excavation including rock excavation shall be carried out true to lines, grades, side slopes, width, camber super elevation and levels as shown on the drawings or as directed by the Engineer-in-Charge hauling and stacking of materials useful for construction at suitable sites and safe disposal of unsuitable cut materials in specified manner filling of unevenness blind age and finishing of the road to specified dimension or as directed by the Engineer-in-Charge. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government but excluding GST. | 7,797.6 | Per cubic metre | 240.89 | ₹18,78,363.86 |
| 2 | Providing and laying concrete mechanically mixed and vibrated mix for plain/reinforced cement concrete grade M-15 (Fifteen) in open foundation as per drawing and MoRTH technical specification Section 1500, 1700 & 2100 including carriage of materials with-in all leads and lifts and other incidental and as per entire satisfaction and direction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or any other imposed by the Government but excluding GST. | 139.08 | Per cubic metre | 6,820.2 | ₹9,48,553.42 |
| 3 | Providing and laying mechanically mixed and vibrated reinforced cement concrete Grade M-30 (thirty) in foundation including form works but excluding reinforcement in any height complete as per drawing and technical specifications and curing complete as per MoRTH Section 1500, 1700 and 2100. The rate is including Octroi, Royalty, Malkana, Toll Tax or any other imposed by the Government but excluding GST within all leads, lifts carriage of material and other incidentals as per entire satisfaction and direction of the Engineer-in-Charge. | 445.5 | Per cubic metre | 7,217.4 | ₹32,15,351.7 |
| 4 | Supplying, fitting and placing un-coated HYSD bar reinforcement in foundation complete as per drawing and MORTH technical specifications Section 1600 & 2100 as per the direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including octroi, Royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. | 44.55 | Per MT | 78,119.05 | ₹34,80,203.68 |
| 5 | Providing and laying mechanically mixed and vibrated reinforced cement concrete Grade M-35 (thirty five) in sub structure including form works but excluding reinforcement in any height complete as per drawing and technical specifications and curing complete as per MoRTH Section 1500, 1700 and 2200. The rate is including Octroi, Royalty, Malkana, Toll Tax or any other imposed by the Government but excluding GST within all leads, lifts carriage of material and other incidentals as per entire satisfaction and direction of the Engineer-in-Charge. | 1,855.46 | Per cubic metre | 8,170.2 | ₹1,51,59,479.29 |
| 6 | Supplying, fitting and placing HYSD bar reinforcement in substructure complete as per drawing and MORTH technical specifications Section 1600 & 2200 as per the direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including octroi, Royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. | 136.31 | Per MT | 78,409.9 | ₹1,06,88,053.47 |
| 7 | Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2 of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification clause 710.1.4 of IRC: 78 and 2504 as per the direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including octroi, Royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. | 2,624.86 | Per cubic metre | 1,382.8 | ₹36,29,656.41 |
| 8 | Supplying, fitting and fixing in position true to line and level POT-PTFE bearing consisting of a metal piston supported by a disc or unreinforced elastomer confined within a metal cylinder, sealing rings, dust seals, PTFE surface sliding against stainless steel mating surface, complete assembly to be of cast steel/fabricated structural steel, metal and elastomer elements to be as per IRC: 83 part-I & II respectively and other parts conforming to BS: 5400, section 9.1 & 9.2 and clause 2006 of MoRTH Specifications complete as per drawing and approved Technical Specifications section 2000 & clause 2200 as per the direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including octroi, Royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. | 1,440 | Per Tonne Capactity | 690.15 | ₹9,93,816 |
| 9 | Furnishing and Placing Reinforced/Prestressed cement concrete in super-structure RCC Grade M50 (Fifty) for any height, as per drawing and MORTH technical specifications section 1500, 1700 & 2300 as per the direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including octroi, Royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. | 1,350.02 | Per cubic metre | 12,014.3 | ₹1,62,19,545.29 |
| 10 | PCC M15 (Fifteen) Grade leveling course below approach slab complete as per drawing and Technical specifications clause 2700 as per the direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including octroi, Royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. | 9 | Per cubic metre | 6,584.5 | ₹59,260.5 |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.51 MB
SBD.pdf
Tender Documents • 5.95 MB
Drawing.pdf
Additional Documents • 0.90 MB
BOQ_204833.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .