NIT No-35/PHE(EM)/BMC (1st Call) Dated-06/03/2026

Supply of 16 meter High mast lighting system with its accessories. Mast shaft shall be in two sections with steel material confirming to BSEN 10025 and material shall be high tensile steel, grade S355, hot dip galvanised confirming to BSEN ISO 1461 and suitable for wind velocity as per IS 875. It shall also include accessories for high mast including head frame, 2 continues steel wire rope 6 mm dia (7/19 construction), trailing cable, double drum winch, Galvanised Lantern carriage arrangement suitable for up to 9 luminaires symmetrically & its control gear (Make of Gear Box : New Allen Berry works / Chandra Gear / Elecon Engineering / Shanti Engineering) boxes and lightning finial. The mast shall have an integral powertool installed inside the base compartment for its operation along with Supply & Fixing of Cu Cable of Power Tool motor, Wiring for Luminaries, Anchor Plate, Foundation Bolt, Nut, Washer, Common Template all complete. Luminaire wiring materials not included in this item. (Make: Bajaj / Transrail / Valmond/ Utkarsh /Skipper)

Supply of foundation bolts manufactred from special steel along with nuts , washers ,anchor plates and templates.

Erection of high Mast (16 M) on RCC foundation with cement concrete considering actual SBC of soil, with the help of suitable modern engg. tools and Plants, wiring of luminaries with all wiring materials like PVC insulated flexible cable of suitable copper conductor core of 1.5 mm² lugs, up to 10 nos. 6A MCB along with construction of shallow foundation with cement concrete for high Mast considering the safe soil bearing capacity as per site condition, as per drawing and design of manufacturer of the mast. The soil test and submission of its report is within the scope of the work.

Erection, testing & commissioning of up to 16.0 meter high mast on the existing civil foundation by bolts with suitable tools, tackles, machines etc, all complete, as per direction of the EIC.

Supply and delevary of 195/200 W LED tye flood light luminaries with single dia ceramic base high power LED ,PDC housing and integrated flood optics for wide angle distribution with IP-66 ingress protection , external surge protecction and epency 120 LM/Watt conforming to latest assredition of LM 79 and LM-80 report nad latest NABA accredition. The inbuilt LED driver should be house with fitting LED driver should be D50 certified .LED driver and housing should be from the same manufacturer . LED should be warrenty for 5 years and as per direction of EIC . Make- Philips/ Crompton/Bajaj/Havels or equivalent .

Installation of LED flood light 6 nos each high mast and its control gearboxes if any and other suitable accessories.(LED flood light fitting will be supplied by the department )

Supply of control panel housing 63A TPN MCB incomer , double duel timer (with rechargeble battery backup ) , contractor circuit for the automatic control of luminaries ,outgoing terminals and control circuit for the power tool motor (LOCAL) (63A TPN MCB made by Havells )

Earthing with 80 mm dia G.I. pipe (TATA medium)x3.0 M long and 1x19/8 standard G.I (Hit Dip ,long 25 mm dia x 150 mm long galvanized bolt ,Double nuts , Double washers including socketing at both ends of startered G.I (Hot Dip) wire(one earthing of mast)& one Earthing from electrical equipmenti.e. total 2 nos earthing are required for each mast.

Allied works : Supply and installetion , Testing and commission of outdoor type feeder piller of size 750 (HO x 600(w) x 450 (D) mm with can copy top fabricated and both sides ventilated by 16 swg CRC sheet,40 x 40 x 6 M.S angle frame ,20 x 20 mm M.S. angle as strenthening rib and for door frame printed with power coater anti corrosive paint and mounted of four legs grouted in 150x150x300 mm M-20 cement concrete the feeder piller consisting of 1 no 100A 415V 4 way Cu bus bar and 1 no 63 TPN outgoing SEU etc mounted on backlite sheet and provision for installation of energy meter have to be made in the feeder piller.