SPECIAL REPAIR/REPLACEMENT OF HT CABLE ALONGWITH CONNECTED ITEMS AT AF STN BAREILLY

Amount

Excavation in trenches n. exc 1.5 m wide and n.exc 1.5 m in depth for laying cable/poles/struts/stays etc. and getting out soft /loose soil complete all as specified and as directed for laying of under ground cable/pipe etc. complete all as specified and as directed

Returning, filling in, including spreading, leveling, watering and well ramming in layers n. exc 25 cm thick in soft/loose soil, complete, all as specified and directed.

Removing surplus excavated material to a distance not exc 50 meter and depositing where directed at level not exc 1.5m above the starting point, complete, all as specified and directed.

Material and labour for providing sand cushioning with dry fine sand including filling, spreading, levelling in layers in cable trench with approved quality of sand for protection of under ground cable complete all as specified and directed. Note- Only punned thickness i.e 18 cm shall be measured & paid)

Supplying & laying un-reinforced precast concrete cable cover, class HV, type I flat, size 300mm x 180mm x 40mm for HT cable protection complete all as specified and directed.

M&L for Boring of holes horizontally under road/pavement/hard standing/ footpath/blast wall without damaging the surface of road (minimum 1.0 meter below the road surface) with the help of GI tubing n.exc 100mm bore for passing of U/G cable, complete all as specified and directed. Note: GI pipe laid will be measured and paid separately under the respective items of schedule.

M&L for 100mm bore GI tubing light grade with all fittings laid across road or across PCC drains, along electric pole or floor/wall for cable protection complete all as specified and directed.

Supply, laying, jointing and testing of HT cable XLPE insulated, screened, PVC bedded, galvanized steel strip, armoured aluminum stranded conductor under ground electric cable 11000 volt (Earthed) grade, cross sectional area 95 Sqmm 3 core, laid in trenches/through pipe /poles etc. complete all as specified and directed.

M&L for Boring of holes horizontally under road/pavement/hard-standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe 150 mm bore suitable for 0.4 MPa working pressure, complete all as specified and directed.

M&L for Cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sqmm, complete all as specified and directed.

M&L for Cable jointing kit for 11 KV (Earthed) grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sqmm, complete all as specified and directed.

M&L for Cable jointing kit for 11 KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sqmm, complete all as specified and directed.

M/S HINA ELECTRICALS

D K THUKRAL AND SONS

M/s Agarwal Builders

M/S BABA ENTERPRISES

Shikha Enterprises

VINYAK TRADERS

RAVINDRA BROTHERS

GUPTA ENGINEERING WORKS

Amit Engineering

A S ENTERPRISES