Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.8 LAccepted-AOC BANKIM CHANDRA ROAD HAKIMPARA SILIGURI DIST DARJEELING PIN 734001 W B | JALPAIGURI | WEST BENGAL | 734001 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹29.4 L+₹1.6 L (5.83%)Rejected-Finance POST BINNAGURI DIST JALPAIGURI W B PIN 735 203 | JALPAIGURI | WEST BENGAL | 735203 | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹33.8 L+₹6.0 L (21.5%)Rejected-Finance GARRISON ENGINEER GE NORTH BINNAGURI | JALPAIGURI | WEST BENGAL | 735232 | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | L4₹37.5 L+₹9.7 L (34.9%)Rejected-Finance PO BINNAGURI DIST JALPAIGURI PIN 735203 W B | JALPAIGURI | WEST BENGAL | 735203 | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 5 | L5₹38.7 L+₹10.9 L (39.4%)Rejected-Finance 96 SECTOR 16 A CHANDIGARH 160015 | CHANDIGARH | CHANDIGARH | 160015 | L5 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
Refer Docs
EMD Value
₹60,000
Closing Date
24 Sept 2020, 6:00 pmClosed
GE (SOUTH) BINNAGURI
GE (SOUTH) BINNAGURI, PO - BINNAGURI, DISTT - JALPAIGURI, PIN - 735232
REPAIR/REPLACEMENT OF INTERNAL WIRING AND ELECTRIFICATION AT MD AND OTM ACCN AT DIFFERENT UNIT UNDER GE (SOUTH) BINNAGURI
2020_MES_370620_2
8375/E8
Open Tender
Civil Works
Item Rate
180 days
GE (SOUTH) BINNAGURI
AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE (SOUTH) BINNAGURI
₹60,000
Yes
16 Dec 2020
9 Sept 2020
25 Sept 2020
9 Sept 2020
24 Sept 2020
10 Sept 2020
Amount
Taking down carefully old unserviceable aluminium point wiring (light, fan, socket or power) complete incl fittings such as switches, celling roses, etc and making good the disturbed surface complete all as specified and as directed.
M&L point wiring complete for one light point controlled by one, one way switch with FRLS PVC insulated unsheathed multistranded copper conductor,conforming to IS-694 of size 1.50 sqmm nominal cross sectional area single core drawn in and including 20mm dia 'heavy grade' PVC concealed conduits and fittings, including cutting chasingin brick wall n.exc 10cm width or girth(excluding ceiling surface), pressed steel concealed terminal switch boxes not less than 1.2mm thick of reqd size factory made duly painted inside and outside with two coats of black bituminous paint over one coat red oxide primer, 3mm thick plastic laminated sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories including making good disturbed surfaces with CM(1:4) with treating the surfaces as per existing finishes complete all as specified and directed.
All as per item No 02 here in above but One ceiling/ exhaust fan controlled by one way switches.
All as per item No 02 here in above but One point for socket outlet 5 amps on independent board but not below the switch board in same vertical plane
All as per item No 02 here in above but One point for socket outlet 5 amp same board with other switches.
All as per item No 02 here in above but one bell/bazzer controlled by one bell push .
All as per item No 02 here in above but One light pointcontrolled by two, two way switches.
All as per item No 02 here in above but One 3 pin 15 Amp socket outlet point controlled by one switch using 2.5 sqmm copper conductor cable with continuous earth wire of 2.5 sqmm copper conductor on independent board.
M&L point wiring complete for one light point controlled by one, one way switch with FRLS PVC insulated unsheathed multistranded copper conductor,conforming to IS-694 of size 1.50 sqmm nominal cross sectional area single core drawn in and including 20/25mm size 'heavy grade' PVC doubled lock Casing-Capping and fittings, including, pressed steel concealed terminal switch boxes not less than 1.2mm thick of reqd size factory made duly painted inside and outside with two coats of black bituminous paint over one coat red oxide primer, 3mm thick plastic laminated sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed.
All as per item No 10 here in above but One ceiling/ exhaust fan controlled by one way switches.
All as per item No 10 here in above but One point for socket outlet 5 amps on independent board but not below the switch board in same vertical plane
All as per item No 10 here in above but One point for socket outlet 5 amp same board with other switches.
All as per item No 10 here in above but one bell/bazzer controlled by one bell push .
All as per item No 10 here in above but One light pointcontrolled by two, two way switches.
All as per item No 10 here in above but One 3 pin 15 Amp socket outlet point controlled by one switch using 2.5 sqmm copper conductor cable with continuous earth wire of 2.5 sqmm copper conductor on independent board.
Supply & fixing ISI marked switch piano flush button type, single pole, one way, 6 Amps, 240 volts for point wiring complete all as specified and directed .
Supply & fixing ISI marked switch piano flush button type, single pole, two way, 6 Amps, 240 volts for point wiring complete all as specified and directed .
S&F socket out let 2 in 1, multipurpose suitable for 2 pin and 3 pin 6 amp flush type complete all as specified & directed.
S&F socket out let multipurpose type, 2 in 1 for 6 pin 6 and 16 amp flush type complete all as specified & directed.
Supply & fixing ISI marked switch piano flush button type, single pole, one way, 15/16 Amps, 240 volts for point wiring complete all as specified and directed .
Supply & fixing ISI marked Bell push piano flush button type, single pole, one way, 6 Amps, 240 volts for point wiring complete all as specified and directed .
Supply & fixing ISI marked Ding dong type door bell, suitable for 230 V AC,240 volts for point wiring complete all as specified and directed .
Supply & fixing ceiling rose 3 pin/PVC/ polycarbonate, isolated body with colour ring 65x50mm, three terminal for point wiring all as specified and directed .
Supply & fixing lamp holder,insulated polycarbonate/bakelite body suitable forbatten / angle fitting complete all as specified and directed .
S&F fan regulator, 5 step(rotary stepped), electronic type, single phase,120/180 V, 400 watt, socket size incl connection complete complete all as specified & directed.
S&F in repair wall mounted slim LED batten 20W, with extruded aluminium housing, with polycarbonate diffuser and integrated LED driver complete all as specified and as directed. Make :- Havells Cat No-ENDURALINEARNEO BS20W LED840SPCWH/EQUIVALLENT OF Phillips/ Bajaj/ WIPRO/ GE)
S&F ultra bright LED polycarbonate tubelight 18Watt with high efficiency suited for installation in T-8 fitting with G13 lamp holders complete all as specified and as directed. Make :- PHOTON ULTRA PLUS OF Havells EQUIVALLENT OF Phillips/ Bajaj/ WIPRO/ GE)
S&F 30 watt (3000 system lumens) High Power LED street light fitting ,pressure die-cast aluminium alloy for housing (heat sink) for effective thermal management, sturdiness & excellent corrosion resistant,toughened glass cover with IP-66,CL-I protection,Integral electronic driver,Heat sink,Cast Aluminium pipe mounting attachment complete with LED lights and connecting the street light fitting using 1.5 Sqmm PVC insulated three core copper cable including taking down all as specified and directed. (Model-ENDURA CITYLITE PLATINUM PLUS of Havells or equivalent of Philips/Wipro/GE)
S&F in repair Mirror Light 9 Watt LED with constant current electronc driver, all accessories including provision of three core PVC cable of copper conductor of size 23/.0076 and making connection complete all as specified and directed.
S&F in repair Decorative luminiare suitable for wall light fixture of LED lamp 1x10/15 watt ( B-22 base) ,made of unbrakeable Polycarbonate with Acrylic decorative diffuser, IP-65 protection, and provision of PVC insulated sheathed round flexible wire with multi stranded copper conductor of size 2.50 Sq mm two core complete all as specified and directed Make : Havells, cat part No.LHDL06160099 or equivalent of Philips/Bajaj.
S&F in repair 10 watt LED Bulkhead light fittings complete with aluminium Alloy grey powder coated housing, Heat resistant prismatic Glass cover with EPDM rubber linning,constant current electronc driver all accessories including provision of three core PVC cable of copper conductor of size 23/.0076 and making connection complete all as specified and directed. Make : HAVELLS cat part No LHEOAOP7UZ6W010 or equivallent of Philips/Wipro.
Supply and Fixing in repair MCB DB double door, powder coated sheet metal enclosure, 8 way 240 volts grade single pole and neutral with 200 amps rated bus bar,IP 43 protection fixed to wall using nuts & bolts and washer of suitable dia and grouted to wall using suitable gutties complete all as specified and as directed.
Supply and Fixing in repair MCB DB double door, powder coated sheet metal enclosure, 4 way 240 volts grade Triple pole and neutral with 200 amps rated bus bar,IP 43 protection fixed to wall using nuts & bolts and washer of suitable dia and grouted to wall using suitable gutties complete all as specified and as directed.
S&F in repair MCB tripple pole & neutral 63 amp, 415 volts, 'C' series, 50 Hz,10 KA breaking capacity,two position din rail clamp, integrated label channel holder, sealed calibration screw, & making connection complete all as specified and directed.
S&F MCB single pole & neutral 6 to 32 amps, 240 volts, 'C' series, 10 KA breaking capacity & making connection complete all as specified and directed.
S&F MCB single pole, 6 to 32 amps rating, 240 volts, 'C' series, 10 KA breaking capacity & making connection complete all as specified and directed.
S & F in repair Moulded Case Circuit Breaker (MCCB) FP with adjustable thermal fixed magnetic release, capacity 100 Amps, line load independability, with horizontal mounting facility , 415 , 50 Hz , 10 KA, including making necessary connection with spreader, link and copper lugs including taking down old unserviceable MCCB /Main switch of any capacity and make from position complete all as specified and directed.
M & L Sub main wiring Concealed type with two single core cable PVC insulated cable with 6.0 Sqmm (Nominal area) multi stranded copper conductor FRLS cable 1100 volts gde including earth continuity conductor using PVC insulated cable of stranded copper conductor of size 6.0 Sqmm connected to common earth dolly and drawing into rigid PVC conduits of 25 mm dia heavy grade, complete all as specified and directed. (Note : Two run of sub main wiring cable alongwith one run of earth wire and one run of conduit pipe shall be measured as one length.
M & L Sub main wiring Concealed type with two single core cable PVC insulated cable with 4.0 Sqmm (Nominal area) multi stranded copper conductor FRLS cable 1100 volts gde including earth continuity conductor using PVC insulated cable of stranded copper conductor of size 4.0 Sqmm connected to common earth dolly and drawing into rigid PVC conduits of 25 mm dia heavy grade, including cutting chasing in brick wall n.exc 10cm width or girth(excluding ceiling surface), complete all as specified and directed. (Note : Two run of sub main wiring cable alongwith one run of earth wire and one run of conduit pipe shall be measured as one length.
M & L for security light bracket made out of GI pipe light grade 32 mm dia 1.2 mtr length bent to shape and reduced to required size at top upto 1.2 mtr length by cutting, welding and well finishing including MS clamp of flat iron of size 25 x 5 mm suitable length 2 Nos complete with drilling, hole, fixing with nuts bolts and washers including painted with two coats aluminium paint over a coat of red oxide primer complete all as specified & directed.
S&F in repairs sheet metal enclosure single pole and neutral enclosure with a two pin and earth plug and socket complete with one SP MCB 20 amps, C series,10 KA, 240 volts complete all as specified & directed.
M &L for Earthing complete with GI earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25M deep below normal ground level) with top edge of the plate not less than 1.5m below normal GL. Connected to galvanized earth lead wire 4mm dia by means of nut, bolt, check nut and washers including necessary excavation and earth work in soft/loose soil, GI protection pipe light grade 15mm bore for protecting the GI wire mesh funnel alternate layer of charcoal dust, and salt PCC pit 1:3:6 type C1 using 20mm graded stone aggregate and 50mm thick RCC 1:2:4 type BO using 20mm graded stone aggregate cover re-inforced with 8 mm dia MS TMT bars 80mm C/C both ways complete all as specified and shown in Electrical plate No.3 SSR part-1 and connected to the earth point and testing complete all as specified and directed.
S&F Modular switch piano, 1 module, 6 amps, 230V AC,single pole, one way complete all as specified & directed.
S&F Modular Bell push, 1 module, 6 amps, 230V AC,single pole, one way complete all as specified & directed.
S&F Modular switch piano, 1 module, 15 amps, 230V AC,single pole, one way complete all as specified & directed.
S&F Modular socket out let,2 module, 2 in 1 multipurpose suitable for 5 pin,5/6 Amps, flush type complete all as specified & directed.
S&F Modular socket out let,2 in 1 multipurpose suitable for 5 pin,15/16 Amps, flush type complete all as specified & directed.
S&F modular fan regulator,2 module, 5 stepped, electronic type, single phase, 50 hz, socket size incl connection complete complete all as specified & directed.
Excavation in trenches not exc 1.5 Mtr wide and n.exc 1.5 mtr in depth, getting out for electric cable complete in any type of soil complete all as specified and directed
Removing surplus excavated soil to a distance n.exc 50 mtr and depositing where directed at a level n. exc 1.5 mtr above starting point complete all as specified and directed
Returning, filling in, soil obtained from excavation including spreading, levelling and well ramming in layers n.exc 25cm thick complete all as specified and directed
Supply, laying, jointing & testing in repair, cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 Sqmm 2 core complete all as specifed and directed.
M&L for GI tubing 40 mm bore, light grade with all necessary fittings laid in trenches/under road crossing/fixed on pole/wall/under floor including 25 x 3mm mild steel FI clamps of required size complete all as specified & directed.
M & L for sand cushioning with dry clean Sand to underground cable 23cm thick (8 cm thick before laying and 15 cm thick after laying the cable) punned to 18cm all as specified and directed.
Supply and laying sub class 'B' bricks laid dry and flat across the length of cable for protection of cable complete all as specified and directed.
SCHEDULE OF CREDIT Rate quoted by the Tenderer for this schedule should not be less than rate assessed by the department shown on estimated rate column for the respective items and total amount under col No 53 will be adjusted accordingly.
Old U/S Point wiring materials excluding switches, sockets,Lamp holders,Call bell ,Bell Pushes ,Regulators obtained from dismantling.
Old unserviceable switches, sockets,Lamp holders,Call bell ,Bell Pushes ,Regulators obtained from dismantling.
Old U/S main switch / MCB DB /any type / rating obtained from dismantling.
Old U/S Sub Main wiring materials any sizes obtained from dismantling.
Old U/S MCB any type / rating obtained from dismantling.
Old U/S Earthing materials any type with cover plate obtained from dismantling.
Old U/S light fittings any type / make obtained from dismantling.
Old U/S GI bracket obtained from dismantling.
Old unserviceable XLPE cable obtained from dismantling.
M/S East India Traders
Shri Amarnath Sah
L. B. SHARMA
ANIL KUMAR GUPTA
samrat saw mill and joinery workshop
M/s. RAMPHAL GARG
GUHA ENTERPRISES
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .