PR NO 94/23 PHC BUILDING MAINTENANCE Sooranad south Grama Panchayat under Annual Plan 2022-23

Amount

PHC maintanance

15.7.4:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar

OD53498/2022-2023:Labour for fixing Window

14.1.1:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)

14.43:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

14.54.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to an give even shade:One or more coats on old work

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

15.31:Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

OD42386/2022-2023:Designing,fabricating,testing,installing and fixing in position curtain wall with Auminium Composite Panel Cladding,with open grooves for linear as well as curvitinear portion of the building,for all heights and all levels etc.Including: (a)Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it water tight including checking of all the structural and functional design. (b)Providing,fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 2mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets(each 0.5mm thick).The Aluminium composite panel cladding sheet shall be coil coated,with Kynr 500based PVSF/Lumiflon based fluoropolymer resin coating of apporved colour and shade on face # 1 and polymer(services) coating on face# 2 as specified using stainless steel screws,nuts,bolts, washers,cleats,weather silicone sealant,backer roda etc. (c) The fastening brackets of Aluminium alloy 6005/MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement,fastners,SS 316 Pins and anchor bolts of approved make in SS316,Nylin separators to prevent bi-matallic contacts all complete required to perform as per specification and drawing.The item includes cost of all materials & labour component,the cost of all mock ups at sight,cost of all samples of the individual components for testing in an approved laboratary, field tests on the assembled working curtain wall with Aluminium composite panel cladding cleaning proction pf the curtain wal with Aluminium coposite panel cladding tile the handing over of the building for qccupation.Base frame work of ACP cladding is payable under the relavent Aluminium item the contractor shall provide curtain wall with Aluminium composite panel cladding ,having all the performance characteristics all complete as per the Architectural drawings as per item description as specified as per the approved shop drawings and as directed by the Engineering in charge. However for the purpose of payament only the actual area on the external face of thr curtain wall with Auminium composite panel cladding(including with of groove) shall we measured squre meter up to two decimal places.

12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete:Ridges plain (500-600 mm)

50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

14.61:Painting (one or more coats) with black japan paint of approved brand and manufacturing to given an even shade.

13.83.2:Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile including applying additional coats wherever required to achieve even shade and colour.Two coats

ANILKUMAR P

Bidder Name

ANILKUMAR P

SURESH PILLAI G