Construction of Mathi Experience store at Mahakavi Bharathiyar Livelihood park in Konalai Panchayat at Mannachanallur Block,pkg 01

Amount

Construction of Mathi Experience Store at Mahakavi Bharathiyar liveli hood park in Konalai Panchayat at Mannachanallur Block. Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete

Supplying and filling in foundation, basement, etc with sand filling in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid)

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid) AGL

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design

Renforced cement Concrete 1:1-1/2:3 (One Cement, One and a half crushed stone M.Sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three M.Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers

Brick work in CM 1:5 (one cement & five sand) using II class ground moulded bricks of size 9"X43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification.

Plastering with cement mortar (1:5) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)

Collection and supply of gritty gravel from appd quarry including cost and conveyance of all materials to site including all labour charges for filling etc.complete,

Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone M.Sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Supplying and Fixing of 2.5mm Thick 80mm X 40MM Hollow Square MS Pipe of Approved quality with necessary bolts clamps Screwes etc.,

Supplying and Fixing of 2.5mm Thick 50mm X 50MM Hollow Square MS Pipe of Approved quality with necessary bolts clamps Screwes etc.,

Supplying and Fixing of 2mm Thick 25mm X 25MM Hollow Square MS Pipe of Approved quality with necessary bolts clamps Screwes etc.,

Supplying and Fixing of 1 no 12mm tk base plate and 10 nos of Anchor Fastener of Approved quality with necessary bolts clamps Screwes etc.,

12 mm thick base plate

Supply and fixing of PUF roof panels made up of minimum 0.5mm thick PPGI corrugated Sheet at the top and a plain sheet at the bottom with a layer of rigid CFC free polyurethane foam (PUF) of density 40kg + 2 Kg/cum as insulation in between The polyurethane foam shall confirm to latest IS 12436. The minimum thickness of PU foam layer shall be 29mm for having 30mm (min) thick PUF panel. The PPGI Sheets shall be of minimum 240 MPA Steel Grade & shall have a Zinc coating of minimum 120 GSM as per IS 277/1992, 5-7 microns of epoxy primer on both sides of the sheet & polyester top coat of 18-20 microns on one side / outer side. The PPGI Sheets / PUF Panels shall have a protective guard film of minimum 20-25 microns to avoid scratches to finished panel during transportation. Providing ridges or hips ,encasing the ends of Panel with plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers etc complete excluding the cost of trusses, purlins and inclusive of cutting to size and shape wherever required. .

Supplying and fixing colour Coated ms roofing sheet plain rain cutter incliding cost and Cutting bending fixing Charges Completed

Paving the floor with best quality Vetrified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three M.Sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Providing and Fixing of Aluminium Compostie Panel (ACP) 4 Sided Having 50X25X1.5MM Frame work Vertical and Horizontal out of Specially designed and etc.,

Supply and Fixing of 12mm TK Glass toughned Glass Patition with Patch Fitting single Conector double conector ,L Conector etc including cost wastage and loading and etc.,

Supply and Fixing of 12mm TK Glass toughned Glass Self size 900mm x 300mm with thread rod etc including cost wastage and loading and etc.,

Supply and Fixing of 12mm TK Glass toughned Glass door with patch fitting and lock handle floor spring system including cost wastage and loading and etc.,

Providing and fixing of wooden false Ceilling using 50 x25 mm Aluminium Section and one side 12mm tk ply wood with one side 1mm laminates and as per Drawing etc.,

Supply and Laying of Sun Control film Including Cost Labour Charges etc all Complete etc.,

Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc,

Supplying and painting two coats new iron work such as steel doors ventilators, window bars etc., (WITHOUT PRIMER)

Supplying and Fixing of 3 Phase DB with MCB 12 way TPMCB sheet steel distribution boards (flush type/surface type) fitted with bus bars and neutral links with three phase MCB outgoings and separate 4 way provision for accommodating One No. 4 pile incoming MCB / Isolator and another separate 4 way provision for accommodating One No. 4 pole ELCB / RCD (totally 8 ways in one segment) (3 x 4 ways in each segment) and separate provisions for MCB / Isolator (totally 12 Nos.) for sub incomers in 3 segments with label holder etc.complete in all respects as directed by the departmental officers SD 600

Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC Concelaed light point SD 23

Wiring with 2 x 1.5 sqmm (36 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch with continuous earth wire connection of 14 SWG SD 322

Wiring with 2 x 4sqmm (56 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch with continuous earth wire connection of 14 SWG SD 57

Wiring with 4x 6 sqmm (84 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch with continuous earth wire connection of 14 SWG SD 63

Supply and Fixing of LED 22W Light includinh cost cutt out and Fixing charges etc.,

Supply and Fixing of LED 10W Light includinh cost cutt out and Fixing charges etc.,

Supply and Fixing of 4 Way 4 TR Cassette inverter including cost cutt out fixing charges etc.,

Supply and laying of 5/8" and 3/8" copper pipe supplied AC unit etc.,

Supply and fixing of double booster voltage stabilizer 5 KVA etc.,

Supply and fixing of Out door stand etc.,

Supply andlaying of Communication cable for indoor and Out door etc.,

Supply and fixing connection and commissioning of 20 amps matel clad socket air conditioner combined with 32 AMPS 4 Poles mcb and etc., SD 251

Supply and laying of 3.5 core 50sq.mm armoured multi strand aluminium cable armoured aluminium cables for electrical motor ,control panel ,pressure switch ,jockey motor etc., SD 215

Supply and fixing earthing arrangements etc.,

Supply and fixing of SS sink including packing the joints with rubber lubricant and fixing in to wall eith wooden plugs ,screws,holding clamps etc.,

Supply and fixing of 75 mm dia pipe including cost and Convenyce etc., 6Ksc

Supply and fixing of 50mm dia pipe including cost and Convenyce etc., 10Ksc

Supply and fixing of pvc nahani trap not less then 75 mm 4 way /2 way (superior variety ) having minimum of water seal of water seal of 50 mm confirm to relevant I.S Specification etc.,

Supply and fixing of SS 304 grade greeting (Superior variety ) complete complying with relevant standard complying etc.,

Supply and fixingand Jointing the following CPVC Pipe standard dimension ratio -11 with water etc.,

Supply and fixing of Squarw wash hand basin (white) of superior variety of size 570 mm X 480 mm with off padastel including cost fixing CI Brack etc.,

Supply and fixing of waste coupling including cost and fixing and etc.,

Supply and fixing of waste hose including cost and convencye etc.,

Supply and fixing of Pillar cock including cost and convencye etc.,

Supply and fixing of Angle Valve Stop Cock cock including cost and convencye etc.,

Supply and fixing of 20mm CPVC Valve ncluding cost and convencye etc.,

80 Cm Round Convex Mirror including cost of stand, labour charges for fixing etc., complete as per standard specification.

Supply and Fixing of Imported SS Leg With Glass Top Round Table - 900mm dia including cost and convencye etc.,

Supply and Fixing of Imported Cafeteria Chair including cost and convencye etc.,

Supply and Fixing of Counter table including cost and convencye etc.,

PVC Sintex portable toilets including cost and convencye etc.,

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for overall quoted amount above this row in column "BB" for all works in this package}

VRM Contractor (BID ID -1346811)