CA NO. CWE/HILLS/RKT/106 OF 2025-2026 REPAIR/MAINT OF INTERNAL/EXTERNAL ELECTRIFICATION AND EXTERNAL WATER SUPPLY SYSTEM AT ALMORA UNDER GE RANIKHET

Amount

Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete with fittings such as switches, ceiling roses, pendants, sockets, lamp holders, brackets, bulk head fittings, tube light fittings etc. and making good disturbed surfaces of walls etc. as per existing finishes by plastering, repairs and white / colour wash etc. complete all as specified and directed.

M & L point wiring for Modular fittings for one light point/ fan/ bell/ 5Amps socket out let (independent)point controlled by one, one way switch with 1.5 sqmm size, PVC insulated and unsheathed 1100volts grade, single core stranded (multistrand) copper conductor (FR-LSH) PVC cable drawn into & including medium grade PVC conduit (not less than 20mm outer dia )with all fittings and accessories fixed concealed (including chase cutting in brick/ stone masonry walls for fixing conduit and plastering and whitewash/colouring the external surface and matching the same with existing surface) incl modular metal flush box for mounting modular fittings and covered with modular cover plate with frame and cup washers including one continuous run of PVC insulated (green colour) 1.5 Sqmm multistranded copper conductor cable earth wire and connected to earth dolly complete all as specified and directed (a)One light/One fan/one bell point controlled by one modular switch

(b) One light point controlled by Two way modular switch.

(c) One modular socket outlet 3 pin 6 amps controlled by one switch on same board.

(d) One modular socket outlet 3 pin 6 amps controlled by one switch on independent board.

All as per item No 2 herein before but wiring with 2.5 sqmm copper wire (FR-LSH) PVC and 2.5 sqmm earth wire for modular socket outlet 5 pin 16 amps on independent board.

Supply and fix modular type switch single pole, one way 6 Amp complete all as specified and directed.

S&F modular switch, 2 way 6 Amp 1 module complete all as specified and directed.

Supply and fix socket out let multi 5 pin, 6 Amps, modular type complete all as specified and directed.

Supply and fix switch modular type single pole, one way 16 Amp complete all as specified and directed.

Supply and fix socket out let 2 in1,3 pin, 6 and 16 Amp, modular type complete all as specified and directed.

Supply and fixing ceiling rose, PVC / polycarbonate isolated body three terminal complete all as specified and directed.

Supply and fixing lamp holder, PVC / polycarbonate type insulated body with back plate suitable for batten / wall fittings complete all as specified and directed.

S & F call bell ding dong AC, 230V single pole complete all as specified and directed.

S&F bell push piano flush type single pole, one way 5 Amp complete all as specified and directed.

Supply and fix in repair switch piano flush type single pole, one way 5 Amp complete all as specified and directed.

Supply and fix in repair socket out let multi 5 pin, 5 Amps, flush type complete all as specified and directed.

Supply and fix in repair switch piano flush type single pole, one way 15 Amp complete all as specified and directed.

Supply and fix in repair socket out let 2 in1,3 pin, 5 and 15 Amp, flush type complete all as specified and directed.

Supply and fix High quality LED T5 integrated batten tube light 20 Watt with aluminium extrusion with frosted PMMA/PC diffuser, internally pre wired of 1.5 sqmm twin twisted flexible cable all as specified & directed.

Supply and fixing in replacement High quality LED 20 W tube rod LED retrofit T8 tube with polycarbonate diffuser and aluminium heat sink for replacing 4 ft florecent tube light complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high output diffuser 2 feet, 1x10 watt, 220 Volt AC, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size & length, complete all as specified and directed.

Supply & Fixing 240 V, 10 KA AC 'B' curve miniature circuit breaker ( MCB) of single poles and current carrying capacity 6 to 32 Amp in the MCB DB complete with connection testing and commissioning including taking down complete all as specified and directed.

S & F in MCB SPN, 240 volts, 40 Amps to 63 Amps (Isolator), rupturing capacity 10 KA, ‘C’ curve type complete all as specified and directed.

S & F in repair MCB TPN, 415 volts, 40 to 100 Ampere, rupturing capacity 10 KA, ‘B’ curve type complete all as specified and directed.

Supply & Fixing LED bulk head light fitting, 1x10/1x9 watt with PDC aluminium housing and milky diffuser with all accessories and including LED light driver holder, connecting up with three core twisted flexible copper conductor cable suitable size of 230 volts, 50 HZ complete all as specified and directed.

S&F in repair sheet metal enclosure for DBs(double door type) single pole and neutral 8 way including blacking plate as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed.

S&F in repair sheet metal enclosure for DBs(double door type) Triple pole and neutral 4 way including blacking plate as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed.

Material & labour for sub main wiring with 1100 volt grade two single core PVC insulated and unsheathed cable with multistranded copper conductor 4 sqmm (FR-LSH) drawn into and including electrical grade PVC conduit not less than 25 mm dia with all accessories fixed concealed including chase cutting in brick/ stone/PCC block masonry for fixing conduit and making good the disturb surfaces of wall as per existing including 4 sqmm multi - stranded copper conductor as earth wire in green colour including taking down existing unserviceable sub main wiring complete all as specified and directed. NOTE: (Note :- 2 runs of 4 sqmm single cable, one run of 4 sqmm earth wire cable and PVC conduit shall be considered as one unit/1Rm)

Material & labour for sub main wiring with 1100 volt grade two single core PVC insulated and unsheathed cable with multistranded copper conductor 6 sqmm (FR-LSH) fixed in and including PVC conduit pipe 25 mm dia with all accessories and one continuous run of 4.0 Sqmm multistranded copper conductor PVC including taking down existing unserviceable sub main wiring complete all as specified and directed. NOTE: (Note :- 2 single core cables along with earth wire and conduit shall be measured as one unit length).

Material and Labour for replacing insulation deteriorated PVC insulated twin core flat 10 Sqmm, 1100 Volts grade heavy duty multistranded aluminium, conductor cable in service connection suspended by insulating hangers not more than 1 mtr apart including 4mm dia GI wire including taking down complete all as specified and as directed.

Material and labour for earthing complete with galvanised earth plate electrode 600 X 600 X 6 mm thick burried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of earth plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire 4 mm dia by means of nuts, bolts, check nuts & washers of galvanised iron or steel all as shown on electrical plate No. 3 of MES schedule 2009, Part – I (Specifications) and connected to main switch board / main DB’s / earthing test point including all necessary excavation and earth work in any type of soil, adequate quantity of charcoal dust & common salt all around the earth plate minimum 150 mm in all directions with & including watering pipe 20 mm dia GI medium grade, GI funnel made out of 0.63 mm thick GI sheet, wire gauge, 50 mm thick RCC cover in PCC 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate), duly reinforced with 6 mm dia mild steel round bars @ 150 mm both ways center to center with suitable lifting handle to cover, earth pit of PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate), GI protection pipe light grade 15 mm bore up to 7.5 m length from earth electrode & engraving of earth marking on nearby building with CM 1:4 plate size 200 X 150 X 15 mm & painting of earth result etc. including testing on complete all as specified and directed Note: - On testing after completion of job, if desired earth resistance is not obtained, the earthing shall be redone by the contractor without any extra cost to Govt at his own expenses.

Supply and fixing round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing round shape 12 watt 220 volts AC surface type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply & Fixing LED post top lantern 40 watt with IP 65 protection comprises of Spherical/Diamond shape diffuser cover, etc and all accessories including monkey cage of suitable size for protection of light, light grade GI pipe of suitable length and wire required for connections etc complete all as directed.

S & F Recess mounting LED luminaire 600mm x 600 mm ,36 W, 220v, with high efficiency PMMA diffuser soft glare free light suitable for recessed mounting ,with powder coated CRCA housing with LEDs, seamless front frame complete with driver and all accessories internally pre-wired and including necessary cutting as required in panel and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

S&F wall bracket type, 09 watt LED decorative fixture made up of polycarbonate base B-22 including LED Lamp of Make Havells Cat part No: LHDL06160099 or equivalent make in Bajaj/C&S/Philips complete all as specified and directed.

S&F bed side LED light fitting , 6 watt, with independent switch & G-22 holder and LED lamp complete all as specified and directed.

S&F Edison screw type LED candle bulb 9/12 watt incl holder complete all as specified and directed.

Dismantling of existing LT pole any size/type from foundation in necessary earth work incl dismantling of concrete MS clamps nuts, bolts, earth wire, OH lines conductor, insulators, guarding cradles & other accessories complete all as specified and directed. Note :- demolition of MS cross arms, earth wire, OH conductor, guarding, cradles etc. will be measured separately.

M & L for supply, transporting, erecting truly in vertical position and fixing of steel tubular pole swaged, over all length 9 metres, type 410 – SP – 31 complete with mild steel base plate, pole cap, finial taper plug, MS bolts, nuts & washers, necessary excavation & earthwork in hard / dense soil, PCC sub base block as mass concrete of size 600 X 600 X 150 mm in cement concrete 1:4:8 Type D-2 in base of foundation, PCC foundation block of size 600 X 600 X 1500 mm in cement concrete 1:3:6 Type C-2, pole plinth of size 600 X 600 X 300 mm in cement concrete 1:2:4 Type B-1 including necessary form work as required at site and painting of pole with two coats of anti corrosive black bituminous paint through out internally and externally upto planting depth (embedded in concrete) and remaining portion of the pole painted two coats of aluminium paint over a coat of red oxide primer on complete exposed surface including painting of 05 Nos. bands / strips of 30 cm wide each with two coats of synthetic enamel paint (black & yellow) at a distance of 30 cm from plinth block upto 1500 mm height and marking / sign writing of pole number and feeders locations of pole with thick synthetic enamel paint (white) complete all as specified and directed.

Material and labour for stringing, stretching and strengthening of overhead conductor (ACSR) on existing LT steel tubular pole including binding and jointing the conductor with and including 14 SWG binding wire and following sizes ACSR conductors: - (a) 6/1 X 2.59 mm aluminium and 1 X 2.59 mm steel (Weasel) (b) 6/1 X 3.00 mm aluminium and 1 X 3.00 mm steel (Ferret)

Supply and fixing Offload Changeover switch 200 Amp Four pole 415 volts side handle operated complete all as specified and directed.

Supply and fixing in repair stay assembly comprising of GI stay bow 14mm dia, 40cm long, galvanised stay rod 16mm dia, 180cm long with threaded ends, GI nuts, bolts, washers, GI stay plate 23x23cmx6mm thick, 02 Nos of thimbles, MS clamps made out of 50x6mm flat iron and stay wire 7/3.15 SWG, stay clamp, loop insulator of size 65x95 mm clearance of hole 16mm complete including necessary excavation, earth work in hard dense soil and PCC 1:3:6 all as shown in electrical plate No. 01 of SSR-2009 part1 , complete all as specified and directed.

Material and labour for earthing complete with galvanised earth plate electrode 600 X 600 X 6 mm thick burried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of earth plate not less than 1.5 m below normal ground level, connected to galvanised earth strip 32 X 6 mm size by means of nuts, bolts, check nuts & washers of galvanised iron or steel all as shown on electrical plate No. 3 of MES schedule 2009, Part – I (Specifications) and connected to main switch board / main DB’s / earthing test point including all necessary excavation and earth work in any type of soil, adequate quantity of charcoal dust & common salt all around the earth plate minimum 150 mm in all directions with & including watering pipe 20 mm dia GI medium grade, GI funnel made out of 0.63 mm thick GI sheet, wire gauge, 50 mm thick RCC cover in PCC 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate), duly reinforced with 6 mm dia mild steel round bars @ 150 mm both ways center to center with suitable lifting handle to cover, earth pit of PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate), GI protection pipe light grade 40 mm bore up to 7.5 m length from earth electrode & engraving of earth marking on nearby building with CM 1:4 plate size 200 X 150 X 15 mm & painting of earth result etc. including testing on complete all as specified and directed. Note: - On testing after completion of job, if desired earth resistance is not obtained, the earthing shall be redone by the contractor without any extra cost to Govt at his own expenses.

Supply, laying, jointing and commissioning LT XLPE 1100 volts grade heavy duty cable PVC insulated, multistranded aluminium conductor served with inner sheathing of PVC tape, armoured with GI steel or tape and over all PVC sheathing laid in trenches, floor through pipes, in duct on pole and roads etc of size 120 sqmm 3.5 core. Note :- 1. Excavation, earth work will be measured and paid separately under relevant item of Sch 'A'.

All as per Srl item No 46 here-in-before but sectional area 16 sqmm 4 core

All as per Srl item No 46 here-in-before but sectional area 16 sqmm 2 core

All as per Srl item No 46 here-in-before but sectional area 10 sqmm 2 core

Taking out unserviceable LT cable of any type and size from pole/wall/trenches by disconnecting electric connections for repair / replacement of cable complete all as specified and directed.

Excavation in trenches not exceeding 1.50M wide and not exceeding 1.5M depth for laying cable and getting out in hard/dense soil complete all as specified and directed.

Returning, filling in, trenches including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in hard/dense soil complete all as specified and directed.

Removing surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above starting point complete all as specified and directed..

Material and labour for sand cushioning with a layer of fine sand 8 cm thick before laying the cable and 15 cm after laying the cable in trenches to cover under ground cable complete all as specified and directed. Note :-Punned down thickness of sand shall be considered for measurement)

Material and labour for brick protection to cable using old size class 'B' bricks of size (230x115x75mm), laid flat, dry butt jointed, laid lengthwise perpendicular to the axis of cable complete all as specified and directed by Engineer-in-charge.

Supply & Fixing in replacement plastic (moulded polypropylene) line phase separator (for separating 05 Nos. of over head line conductors of length 1200 mm) with 25 mm fly nuts and clamps suitable for 1100 volts grade LT electric lines of any size fixed with over head electric lines complete all as specified and directed.

Supply and fixing / laying of galvanized iron pipe of 150 mm nominal bore light grade for cable protection, fixed to pole/ along wall/ floor/ under road/ across the drain or nallaha etc with clamps nuts, bolts and washers complete all as specified and directed. Note : The cost of MS clamp, nut, bolt, washer and GI fittings etc shall deemed to be included in the unit rate quoted by contractor.

All as per Srl item No 57 here-in-before but 25mm nominal bore of pipe

Dismantling of existing stay assembly any type / size from its stay rod, cutting stay rod (above ground portion) dismantling of MS clamps, nut-bolts, stay bow, loop insulators, stay wire etc. complete all as specified and directed.

Dismantling / taking out old ACSR conductor / copper conductor / GI earth wire any size from existing overhead lines including disconnection complete all as specified and directed.

M&L for one coat of aluminium shade paint of approved quality including preparation of existing old painted surface of steel tubular poles LT complete including flat iron clamps, bracing, cross arms etc and numbering of poles with white synthetic enamel paint over a circular painted base and strip marking paint up to a height of 5 feet with black & yellow five bands with synthetic paint (strip of 1 feet height each) complete all as specified and directed.

Supply & Fixing in repairs MCCB of Cap 160 Amp, 4pole, 36 KA, with adjustable thermal release and earth fault protection, 415 volt grade including cutting and welding work for fixing of MCCB in existing panels any type and model complete all as specified and directed.

All as per item No 62 here in before but cap 200 Amp,36 KA

All as per item No 62 here in before but cap 630 Amp, 50 KA

Cutting/ trimming of tree branches of any width/ girth up to 1.0 mtr distance on both sides of HT/ LT over load lines including collection and depositing the retrieved timber at a place as directed by Engr-in-charge. Note :- (i) Each span have a distance 40mtr approximately (ii) All cutting branches of trees shall be thrown away/ burnt at approximate 200 to 500 mtr away as directed.

Material and labour for PCC 1:2:4 type B-1, using 20mm graded crushed stone aggregate as in coping of pole, floor including necessary form work where required and fair and even finish to the exposed surfaces all as specified & directed.

Supply & Fixing in replacement Steel rolling shutters, with out ball bearing but gear operated type with bevel gear box and crank handle, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type

Dismantling/taking down old steel rolling shutters, with out ball bearing but gear operated type with bevel gear box and crank handle, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type

Supply and fixing LED street light fitting 30/35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Supply & Fixing LED street light fitting 50W 6000K pressure die cast aluminium IP66 roadway luminaire with high power LED as light source and electronic driver including PVC Sheathed multi-stranded copper conductor cable of three core complete including taking down existing old light fitting any type all as specified and directed.

Supply and fixing LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lam complete all as specified and directed.

Supply and fixing in replacement of LED Driver for street lights of capacity 25/32 Watt complete all as specified and directed

Supply and fixing in replacement of LED Driver for street lights of capacity 45/50 Watt complete all as specified and directed

Supply and fixing on pole / wall Nature switch 02 EC with enclosure factory made suitable for 8 KW street light load single phase 240 volts and power contactor rating 40 Ampere with MCB 63 Ampere contactor and terminal block confirming to IEC – 60947 – 4 – 1 / IS – 13947 – 4 – 1 (Sensor alongwith pre-dawn switching off timer, 4 – 8 hours) infrared sensor based switch for intelligent outdoor street light control model No. SWADEEP – 02EC8kW1P, Make – KAKATIYA ENERGY SYSTEMS LTD. Or its equivalent approved make complete with and including mounting bracket, cable glands, openable doors with lock complete all as specified and directed.

Taking down old U/S junction box and Supply and fixing Junction Box made up of High quality thermoplastic polycarbonate enclosure with IP 65 degree of protection, weather proof, corrosion proof, dust proof, insulted and shock proof, fire retardant non toxic material with internally embedded gasket with 10 Amp MCB and 4 nos terminal of size 200x160x98 mm of make hensel or equivalent make of Sintex/ Universal complete all as specified and directed by Engineer-in-Charge.

Taking up or down existing rusted/unserviceable GI tubing of any grade including S&F GI water tubing medium grade 100 mm bore, galvanised with all GI fittings (such as bends, elbows, tees, connectors, short pieces, back nuts, unions, caps & plugs etc) laid in trenches/on surface including cutting, threading and testing complete all as specified and directed.

All as per item No 76 here-in-before but 80 mm bore

All as per item No 76 here-in-before but 50 mm bore

All as per item No 76 here-in-before but 25 mm bore

All as per item No 76 here-in-before but 20 mm bore

Taking out old unserviceable gate valves for replacement including S&F of gun metal gate valve of 50 mm bore ISI marked class I with iron wheel head screwed both ends for iron pipe & fixed complete all as specified and directed.

All as per item No 81 here-in-before but 40mm bore

All as per item No 81 here-in-before but 25 mm bore

All as per item No 81 here-in-before but 20 mm bore

All as per item No 81 here-in-before but 15 mm bore

Taking out old unserviceable sluice valve for replacement including S & F new sluice valve of 80 mm size cast iron body flanged and drilled as per ISI 14846 (ISI Marked) specifications PN-1.6 with stainless nuts, bolts, washers & fibre/rubber gasket steel spindle including all accessories complete all as specified and directed.

Servicing, Overhauling, checking and Testing complete of DG Set 62.5 KVA at Pump House No - 2 a) Supply and replacement of Lub oil filter, Fuel filter primary and secondary, Hose bend & Hose pipe, Air filter. b) Drain out old lubricant oil from oil sump and supply and filling of fresh lubricant oil 20 W 40 grade. c)Drain out water from radiator of engine and cleaning the same with anti rusting solution and supply and filling of coolant. d) Checking and making necessary adjustment to drive belts, Speed governor and fuel injectors for smooth function of the engine. Make:- Kirloskar

M & L for painting with two coat of synthetic enamelled paint of approved shade over a coat of red oxide primer on external surfaces of motor and pumps after complete removal of existing paint and preparation of steel & iron surfaces including writing SM/MES Nos with paint etc. complete all as specified and as directed.

Cleaning of valve pit chambers, removing algae, silt, sludge accumulated at bottom of valve pit chambers up to the entire satisfaction of Engineer in Charge.

Collecting samples of under ground sump water from Almora pump house for Bacteriological testing and complete Chemical testing for parameters as specified Note : The bacteriological and chemical testing of water shall be carried out in Govt authorised laboratory . The item cost includes collecting of samples of water from UG sump and Pump house site and charges of Govt authorised laboratory for carrying out testing of water sample shall be born by the contractor.

Material and labour for servicing of electrically driven centrifugal pump set 10 HP Motor - pump set) including greasing , cleaning and replacement of water body kit seal cup, screw ring retainer, bearing , greasing of motor, nut bolt etc. complete all as specified by the Engr-in- charge.

Demolition of existing unserviceable masonry valve pit including all accessories like angle iron frame, door fixed with MS sheet cover etc and M & L for construction of brick masonry valve pit of size610x610x610mm (internal dimensions) with brick work of sub class 'B' old size bricks built in cement mortar 1:4 and 10mm thick rendering on internal and exposed external surface and including 40x40x6mm mild steel angle frame 3.15mm thick mild steel sheet cover in two Nos shutters with handle and locking arrangement and 1 Nos 50mm size 4 levers lock with key in duplicate including painting steel and iron surfaces with two coats of black bituminous paint over a coat of red oxide primer complete all as specified, shown on drawing and as directed

Demolition of existing unserviceable masonry valve pit including all accessories like angle iron frame, door fixed with MS sheet cover etc and M & L for construction of brick masonry valve pit of size 1050x1050x900mm (internal dimensions) with brick work of sub class 'B' old size bricks built in cement mortar 1:4 and 10mm thick rendering on internal and exposed external surface and including 40x40x6mm mild steel angle frame 3.15mm thick mild steel sheet cover in two Nos shutters with handle and locking arrangement and 1 Nos 50mm size 4 levers lock with key in duplicate including painting steel and iron surfaces with two coats of black bituminous paint over a coat of red oxide primer complete all as specified, shown on drawing and as directed

M & L for Cleaning of complete UG sump tank capacity 50000 gallon and clear water tank 50000 gallon by carrying out following works all as specified and directed and specified by Engr-in-charge. a) Dewatering of left out water from the tanks by pumping out existing contaminated water complete with diesel engine driven pump or manually. b) Taking out complete mud/dirt and depositing the same not exceeding a distance of 500mtrs from the well/ UG Sump . c) Cleaning the tank by washing the sides and floor of the tank using scrubbers. d) Washing the tank using bleaching powder solution, removing sludge and mass from all the surface taking out the same until a clean surface is obtained, applying two coats of lime wash on walls, e) Painting the date of cleaning at a prominent place complete all as specified and as directed by Engineer-in-Charge.

Complete cleaning & welding of pressed steel/iron water storage tank from inside of capacity 1,91000 Ltrs capacity PS tank located at Helipad Ground, extraction of all mud/sand/dust/Algae deposits making it free from algae growth by scrapping & washing all mud/sand/dust/Algae deposits making it free from algae growth by scrapping & washing with water & painting with one coat of black bituminous paint all the MS items fitted inside the tank to make corrosion free incl marking of tank capacity and date of cleaning etc complete all as specified & as directed.

All as per item No 95 here-in-before but 80,000 Ltrs capacity PS tank located at MES Office pump house

All as per item No 95 here-in-before but 45,000 Ltrs capacity PS tank located at Near Army school

All as per item No 95 here-in-before but 41000 Ltrs capacity PS tank located at Near Army school

All as per item No 95 here-in-before but 10000 Ltrs capacity PS tank located at Near Army school

AJA BUILDERS (BID ID -3477618)