/R and M/O Residential building under Kullu Sub Division

Amount

Earth work in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto any lead dressing of sides and bottom and backfilling in trenches with excavated suitable material with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering andshuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand): 6 gradedstone aggregate 40 mm nominal size) with in all leads and lift of materials and as per direction of Engineer-in-charge.

Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in?Charge 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern with in all leads and lift of materials and as per direction of Engineer-in-charge.

Demolition below G.L. upto 1.50Metres depth and disposal of unserviceable materials within 20 metres lead.Un-reinforecd cement concrete upto 15 cm. Thickness with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and laying cement concrete 1:2:4 (1 cement:2 Sand:4 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in: Foundation and plinth with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and laying spartic ceremic tiles 8 mm.thick in flooring (300 x300mm. size)treads of steps laid on a bed of 12mm. thick cement mortar 1:3(1cement: 3 sand) finished with flush pointing in white cement with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and laying spartic ceremic tiles 8 mm.thick in flooring (600 x300mm. size)in skirting and dado12mm. thick cement mortar 1:3(1cement: 3 sand) finished with flush pointing in white cement with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing 8mm thick AC -IV leminated wooden flooring gongued and groved joints in manufacture are 3mm thick cusion and water proofing polythene sheet on sub floor sub floor to be measured and paid separately with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing 8mm thick AC -IV leminated wooden skirting with in all leads and lift of materials and as per direction of Engineer-in-charge.

Distempering(one coat) with oil bound washable distemper of approved brand and manufature and of required shade,on decorated wall surfaces to give an even shade,after thoroughly brushing the surface clean of all grease,dirt,loose pieces of scales and also including preparing the surface even and sand papered smooth for every sub sequent coat of distempering with oil bound washable distemper of approved brand and manufacture. sq.m Walls with in all leads and lift of materials and as per direction of Engineer-in-charge.

Painting one coat (excluding priming coat)on previously painted wood and wood based surfaces with readymixed paint brushing to give an even shade including cleaning of all dirt,dust and other foreign matter sand papering and stopping With readymixed paint other then white for every subsequent coat of paint

Brick workBrick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarsesand) with in all leads and lift of materials and as per direction of Engineer-in-charge.

15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:4 (1 cement: 4 fine sand) with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and applying white cement based putty of average thickness 1 mm,( one millimetre) of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete with in all leads and lift of materials and as per direction of Engineer-in-charge.

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) with in all leads and lift of materials and as per direction of Engineer-in-charge.

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete.110 mm X 75 mm with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing high pressure PVC spigot and socket,waste and ventilating pipes ISI marked including fixing with approved adehesive etc. complete. 110 mm( one hundred millimeter)

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete with in all leads and lift of materials and as per direction of Engineer-in-charge. 110 mm ( one hundred millimeter)

Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete with in all leads and lift of materials and as per direction of Engineer-in-charge. 110 mm( one hundred millimeter)

Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive etc. complete with in all leads and lift of materials and as per direction of Engineer-in-charge. 110 mm ( one hundred millimeter)

Providing and fixing PVC offset 45º ISI marked including fixing with approved adhesive etc. complete with in all leads and lift of materials and as per direction of Engineer-in-charge. 110 mm ( one hundred millimeter)

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete with in all leads and lift of materials and as per direction of Engineer-in-charge. 110 mm ( one hundred millimeter)

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete with in all leads and lift of materials and as per direction of Engineer-in-charge. a) PN - 16 Pipe, 20mm OD (SDR-7.4

Providing and fixing white vitreous china water closet squatting pan (Indian type) Orissa pattern W.C. pan of size 580x440mm with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing corner shelf 3 piece set (Jaquar) with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing & Fixing Toilet paper holder CP Brass (Jaquar) with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing & Fixing Thumbler holder CP Brass (Jaquar) with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing 32mm( Thirty two milimetre) dia C.P. brass waste for wash basin and sink. (Jaquar) with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing waste pipe 32mm PVC waste pipe and sink including PVC union chock complete with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing centre hole mixture for wash basin.(Jaquar) with in all leads and lift of materials and as per direction of Engineer-in-charge.

P/ F soap dish Jaquar item no1531) with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing 600mm x120mm glass shelf with CP brass bracket and guard rail complete fixed to wooden plugs with CP brass screws. (Jaquar) with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing C.P. brass bib tap capstan head 15mm dia .(Jaquar) with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing C.P. angle valve/ 15(Fifteen) mm dia.(Jaquar) with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing over head shower with arm (Jaquar) with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing CP connection with brass unions 300/450mm length 15mm nominal bore with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing towel rail (Jaquar) with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing towel ring (Jaquar) with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing 100mm dia chromium plated grating of superior quality for door, gully or Nahani trap with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing hand jet faucet(Jaquar) with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing hollow diverter and his upper part (Jaquar) with in all leads and lift of materials and as per direction of Engineer-in-charge.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 600x450 mm with in all leads and lift of materials and as per direction of Engineer-in-charge.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works with in all leads and lift of materials and as per direction of Engineer-in-charge.

MOHAN LAL