SPL REPAIRS TO BLDG NO P-01 ,REPLACEMENT OF WINDOW OF BLDG NO NP-08, PROVN OF HARDSTANDING WITH ILCBN AND JAFRI ALONG THE ROAD ON BOTH SIDE FROM OUTSIDE OF MAIN GATE TO OFFICE COMPLEX AT VARIOUS LOCATIONS OF NAA UNDER GE (N) TEZPUR

Amount

Dismantling of floor/ wall tiles including cement mortar bedding of any thickness upto PCC/ RCC/brick surface and rubbish off the premises, complete in all respect all as specified and directed.

Dismantalling of cement concrete (unreinforced) in ground floors and pavings not exceedings 15 cm thickness (below or above ground level), complete in all respect as specified and directed.

M&L for PCC (1:4:8) type D2 (using 40mm crushed and graded stone aggregate) as in foundaion and mass filling complete in all respect as specified and directed

Demolition of brickwork or stone/ boulder masonry, built in cement mortar complete all as specified and directed.

M & L for brick work with sub-class "B" old size bricks of class designation 75, straight or curved on plan exc. 6m mean radius built in CM (1:6) complete in all respect as specified and directed

M & L for half brick work with sub-class "B" old size bricks of class designation 75, straight or curved on plan built in CM (1:4) complete in all respect as specified and directed

S&F 35mm thick second class HW glazed and skeleton shutters, open rebated and prepared to receive glass gauge etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass etc.; sizes of members of shuttrs as specified in SSR Part-I, section 8, clause 8.24 (a), complete in all respect as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/ Chowkhat of size 65 X 125mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk / wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face)& 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite / borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/ss dash fasteners of required dia and length complete as per direction of enineer-in-Charge (M.S. hold fast/lugs or SS dash fastener shall be paid for seperately) Note: For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Taking down chowkats and shutters (without taking off shutters from the frame) n.exc 1.5 sqm each, complete in all respect as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm and n.exc 4 sqm each, complete in all respect as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coats of weather coat over 2 mm thick wall care putty over a coat of primer including necessary preparation of surface, complete in all respect as specified and directed.

M&L for preparation of old decorated plastered surface of wall after complete removal of existing treatment and applying two coats of weather coat over 2 mm thick wall care putty (in two layers) over a coat of primer including preparation of surface, complete in all respect as specified and directed.

M&L for preparation of newly undecorated plastered surface of wall and applying two coats of oil bound distemper (OBD) and finished another one coat with spunge roller over one coat of alkali resistant priming paint over 2 mm thick (in two layers), wall care putty, complete in all respect as specified and directed.

M&L for complete removal of existing treatment on wall and applying two coats of oil bound distemper (OBD) and finished another one coat with spunge roller over one coat of alkali resistant priming paint over 2 mm thick (in two layers) wall care putty, complete in all respect as specified and directed.

M&L for 25 mm thick of cement concrete flooring using type B 0, 1:2:4 (using 12.5 mm nominal size crushed and graded stone aggregate) and finished fair and even without using extra cement, complete in all respect as specified and directed.

S & F Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc etc. complete in all respect as specified and directed

S & F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. or for window grill of appd size and shapeincluding fixing with aluminium "U" shape section for fixing etc. complete in all respect as specified and directed. (Powder coating shall be min 50micron) (Note: all external members to be joined at 45 degree angle at corner)

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin- charge.

S&F 30mm thick Flush shutters, solid core construction, with block board core with decorative face veneers with lipping on both sides, complete in all respect as specified and directed.

S&F 30mm thick Flush shutters, solid core construction, with block board core with decorative face veneers with lipping on both sides, complete in all respect as specified and directed.

S & F powder coated aluminium sliding window with/without sash bars, aluminium sections of thickness 2mm including necessary joining cleats, glazing clips, EPDM rubber packing (of 50 No grade), powder coated aluminium snap beading, screws, center grooved stainless steel ball-bearing double roller 2 position height adjustment, sound/dust brush, recessed handle with locking arrangement complete in all respect as specified and directed. (Powder coating shall be min 50micron) (Note: all external members to be joined at 45 degree angle at corner)

Dismantling asbestos cement sheet, ridge (corrugated, semicorrugated, plain etc.) in roof coverings, walls, ridges etc. or of similar types complete in all respect as specified and directed.

S & F pre-painted galvalume aluminium zinc coating GI based (trapezoid profile) steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in ridge or valley gutter or of similar type used in roofs fixed with self tapping screws with bitumen washers complete in all respect as specified and directed. (to be measured as flat)

S&F pre-painted galvanized aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in eaves board, eaves gutters, purpose made or of similar type complete in all respect as specified and directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, tubular/hollow section, channel or flat sections) including distance pieces, cleats etc. using Fe-410W (Grade E-250 quality "A") including necessary welding complete complete all as specified and directed.

Demolition and breaking up drain pipes 75 mm/110 mm bore dia (Salt glazed ware, PVC or Reinforced concrete) set in cement mortar, complete in all respect as specified and directed.

Taking down cement plaster of any thickness and description on brick/ concrete/ stone wall/ ceilings, etc, including raking out joints, hacking for key, scrubbing down with water etc, complete in all respect as specified and directed.

M&L for 15mm thick rendering on brick or concrete wall surfaces in cement mortar 1:6, finished even & smooth without using extra cement complete in all respect as specified and directed.

M&L for 15mm thick rendering on brick or concrete wall surfaces in cement mortar 1:4, finished even & smooth without using extra cement including mixing of water proofing compound complete in all respect as specified and directed.(Note: Water proofing compound shall be measured and paid under supply only item)

M&L for 10 mm thick plastering on brick/ stone/ concrete surfaces of ceiling in cement mortar (1:3) finished even and smooth without using extra cement, complete in all respect as specified and directed.

Supply only integral water proofing compound complete in all respect as specified and directed. Note : Water Proofing compund shall be mixed as per manufacturer's instructions.

S&F exposed GI powder coated snap grid frame work for false ceiling in flat or in sloping, of grid size 600 x 600 mm comprising of wall/ cleat angle of size 25x25x0.35 mm and corss tee of size 24x38x0.70 mm with 4 mm dia GI wire as suspender and including 4 mm thick decorative pre-painted non asbestos board (E-Board) in false ceiling including fixing arrangement from steel/ wooden truss of any type including dismantling of existing false ceiling boards, complete in all respect as specified and directed. (Make:- Eternit, Everest or equivalent)

S&F Factory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, fixed in opening as per specification & drawing complete all as specified and directed.

S&F 100mm size butt hinges medium weight, cold rolled mild steel (ISI marked) complete all as specified and directed.

S&F 75mm size butt hinges medium weight, cold rolled mild steel (ISI marked) complete all as specified and directed.

S&F 20mm dia tubular towel rail 600mm long of cast copper alloy, chromium plated with end brackets complete in all respect as specified and directed.

S&F Aluminium handle cast type anodised 150 mm size (ISI marked) complete all as specified and directed.

S &F aluminium anodised sliding door bolts with hasp and staple (bolt type) 12mm dia bolt 300mm long, with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

M&L for preparation of untreated new steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for 15mm thick screed bed or bedding layer of mortar in CM 1:4 fixing of tiles in floor complete all as specified and directed.

M & L for Virified Ceramic tiles light shade 9-10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile complete in all respect as specified and directed.

M & L for coloured non - skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement with pigment to match the tile colour complete in all respect as specified and directed.

M & L for coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile colour complete in all respect as specified and directed.

M&L for Providing and laying reinforced concrete slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like using 1:2:4 type B-1, (using 20 mm crushed and graded stone aggregate) complete in all respcet as specified and directed.

M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete in all respcet as specified and directed.

M&L for any colour of granite stone without white spots Granite stone slab 17 to 19 mm thick, as in floor, dado, steps, laid over and including screed bed 15 mm thick in cement mortar (CM) 1:6, jointed and pointed with white cement mixed with pigment to match the shade of stone including cuttingl rubbing and polishing surface, including cutting for wash hand basin, sink, gas pipe hole etc., to the entire satisfaction of the Engineer-in-Charge, complete in all respect as specified and directed.

M&L for 18-20mm thick machine cut kota stone slab flooring of size not less than 500X500mm over 20mm thick cement mortar (1:6) cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M & L for 18-20mm thick machine cut kota stone slab of size not less than 500X500mm in riser of steps, skirting , dado and pillar over 15mm thick cement mortar (1:4) cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

S & F powder coated aluminium ventilator with half portion louvered (adjustable)with 4mm thick glass in louver and balanced portion fixed 4mm thick frosted glass glazing including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings complete in all respect as specified and directed.

S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; and similar work conforming to Fe. 290, Gde-E-165 complete all as specified and directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F CP finish cast copper alloy, two way bib cock complete in all respect as specified and directed. Make:- Jaquar cat part No SQT-512ANKN, Hindware Cat part No F-330004SCP

S&F 16mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches with all fittings fixed complete to walls and ceiling or laid in floors including necessary cutting, chasing etc complete all as specified and directed.

20 mm bore GI tubes medium grade, galvanished with all fittings fixed complete to walls and ceiling or laid in floors.

S&F 20mm dia of gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron/CPVC pipe/fittings and fixed complete all as specified and directed.

M&L for 110 mm Bore PVC (SWR) pipe single socket in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F 110mm PVC (SWR) WC connector bent type complete all as specified and directed.

S&F PVC(SWR) junction single (single 'T') equal or unequal 110mm bore complete all as specified and directed.

S & F PVC (SWR) 110 mm dia vent cowl complete all as specified and directed.

S & F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 75 mm bore complete in all respect as specified and directed.

S&F PVC (SWR) 75mm dia bent type complete all as specified and directed.

S & F PVC (SWR) 75 mm dia vent cowl complete all as specified and directed.

S & F PVC (SWR) branch piece with access door, single (Single Tee) equal or unequal 75mm bore pipe complete in all respect as specified and directed.

S & F Rotational moulded polyethylene water storage tanks of capacity 1000 ltr (cylindrical vertical with closed top) including two tank nipples one at inlet and other at one outlet of 20mm dia complete all as specified and directed.

S & F PTMT ball valve high pressure 20mm bore with epoxy coated aluminium rod & high density plastic ball screwed for iron/CPVC pipe/fittings complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane, complete in all respect as specified and directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width aperture 1.40 mm and fixed with stainless steel wire staples fixing withbeads, complete in all respect as specified and directed.

S&F in repair wash hand basins (WHB), vitreous china of size 550x400 mm (flat back or angle back type), including cutting for and pinning in ends of brackets over new angle iron erecting stand embedded in PCC (1:2:4) block including 32 mm dia bore waste fittings cast copper alloy chromium plated with long screwed shanks and flynuts flange and beded in redlead cement, 32mm brass chromium plated bottle trap including 15 mm Brass CP mixer for mixing hot & cold water with long screwed shanks and fly nuts, screw for iron pipes complete in all respect as specified and directed.

S&F 15mm bore dia CP finish , bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron/CPVC pipe/fittings or for brass ferrule including cup washer/flange(Make-Jaquar) complete all as specified and directed.

S & F 15mm bore dia CP finish,angle valve, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron/CPVC pipe/fittings or for brass ferrule including cup washer/flange complete all as specified and directed.

S&F in repair for 15 mm bore pipe brass chromium plated (CP) shower rose 125 mm size, fixed to iron pipe, complete all as specified and directed.

S&F in repair for 15 mm Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed.

S&F in repairs vitrious china squatting pan orissa pattern , size 580x440 mm white , with integral foot rest ( Excluding flushing cistern and flushing pipe all as specified and directed by Engr - IN - Charge

S&F chrome finished toilet paper holder of cast copper alloy complete all as specified and directed.

S & F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) complete in all respect as specified and directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement

Material and labour for Cleaning and preparation of roof/wall (RCC/BRICK/tiles/Cement cuncrete) surface and made free of dirt, foreign particles, laitance followed by grinding all protrusions to make surface modulated. Thereafter, inspection for cracks on the surface ceused by thermal expansion/ contraction and repairing the cracks on the surface caused by thermal machine, filled with Repair Mortar/General purpose Grout in the proportions as recommended by manufacturer, supplying and applying High performance Hybrid Polyurea waterproofing coating spray/hand applied liquid membrane including taking of existing roof treatment and apply with following specifications: (a) Elongation of range 400% 600% (b) Tensile strength of 8-12 N/mm2. (c) Crack bridging ability of 3.00-4.00mm (d) Hardness (Shore 'A' ASTM D2240) of range 50-70 The application shall include final base preparation, epoxy primer application in rato 1.1 (resin: hardner) with 100% water dilution and application of Hybrid polyurea in two coats in 6 hrs interval to achieve total min thickness 1 to 1.50mm. The application/ treatment shall be carried out by authorized rep of approved specialist firm/manufacturer Make- SIKA/FOSROC/Asian Paints/Berger. Note: The defect liability period of water proofing treatment shall be 10 years and the contractor shall beespor building(s) free From leakage/seepage for a period of completion. The contractor may obtain a similar guarantee by him for the purpose. 10 years after certified date of completion. the contractor may obtain a similar guarantee from the specialist firm engaged by him for purpose.

S & F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement floor trap complete all as specified and directed.

S&F 4.8 mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq.m in each pane, complete in all respect as specified and directed.

M&L for preparation of old decorated steel surface of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint, complete in all respect as specified and directed.

Surface dressing n exc 15 cm deep geeting out in soft/loose soil complete in all respect as specifified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and geeting out in soft/loose soil complete in all respect as specifified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. in soft/loose soil complete in all respect as specifified and directed.

Removing excavated material n. exc. 50m and depositing where directed at a level n. exc. 1.5 m above the starting point complete in all respect as specified and directed.

M & L for Broken stone or boulders hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete in all respect as specified and directed

M&L for PCC (1:2:4) Type B-2 (20mm graded stone aggregate) as foundation filling and mass concrete complete in all respect as specifified and directed.

M&L for preparation of new plastered or undecorated surfaces of wall/ceiling using wall care putty to fill the voids and applying two coats of cement base paint over a coat of alkali resistant priming paint complete all as specified and directed.

S & F for 55-60mm thick coloured, glazed pre coated interlocking or without interlocking paver block of any shape and size confirming to IS 15658/1237 with upto date amendments, M-35 Grade with grey cement with pigment laid over fine river bed sand complete in all respect as specified and directed.(Note:- River bed sand shall be measured and paid separately). Sample as approved by GE.

M&L for Plain Cement Concrete Type B-2 1:2:4 (using 40 mm graded stone aggregate) 100mm thick making finish even and fair without using extra cement.complete in all respect as specified and directed.

M&L for river bed fine sand filling under floor or below paver blocks incl. watering and consolidation complete in all respect as specified and directed.

S&F 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete in all respect as specified and directed.

M&L for Providing and laying for cement concrete in coping, hold fasts using type B-1, 1:2:4 (using 20 mm nominal size crushed and graded stone aggregate) or of similar type of work including necessary formwork complete in all respect as specified and directed.

M&L for Reinforced cement concrete (nominal mix) Type A-1 1:1.5 :3 (using 20mm graded Aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span

M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)

M&L Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide

M&L mild steel deformed TMT bar 10mm dia and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed by the Engineer-in-Charge

All as per Srl item No 99 above but 8mm dia as in stirrups, spacers and binders,

M/L for applying two coats of cement base paint on concrete or brick work surfaces including preparation of newly plastered surface complete all as specified and directed.

M&L for providing precast cement concrete louvers and jallies 65mm thick made in Mix 1:2:4 type B0 using 12.5mm graded stone aggregate set in cement mortar 1:4 etc complete all as specified and directed.

Taking down carefully aluminium / copper point wiring any type for one light , fan, socket power point or buzzer controlled by one switch complete including fitting / fixtures such as switches, ceiling roses, holder, socket etc; and making good disturbed surfaces of walls, ceilings etc

All as per item 104.0 above but for One 3 pin socket outlet 5 Amps on same board.

All as per item 104.0 above but for One 3 pin switch socket combination 5 Amps on indpendent board

All as per item No.104.0 above but with 2.5 sqmm single core multistranded copper conductor FRLSH cable for 3/5 pin 15 Amp socket outlet on independent board.

S & F in replacement Modular switch 1 way 10 A 1 module module complete all as directed.

S & F in replacement Modular switch 1 way 16 Amp SP , 1 module complete all as directed.

S & F in replacement Modular Fan step regulator, 120W - 2 module

S & F in replacement Modular Socket 6 A 2/3 pin combined 2 module

S & F in replacement Modular Socket 6 A /16 A-2/3 pin combined 2 module

S & F in replacement of modular bell push switch 5 Amps complete all as specified and directed.

S & F in replacement of call bell, Ding dong type, AC 230 Volts single pole complete all as specified and directed.

S & F in replacement of ceiling rose polycarbonate type three terminals complete all as specified and directed.

Supply and fixing in replacement decorative wall light fixture metalic body single head wall light suitable for 20 watt maximun wattage complete all as specified and as directed.

M&L for replacement of main circuit of BLDC ceiling fan 1200/1400 mm sweep make as per site after taking down unserviceable coils and refixing the same after repair and testing complete all as specified and directed.

M&L for rewinding of exhaust fan 280 to 450 mm sweep after dismantlingand taking out the burnt winding coils and rewinding with super enamelled copper winding wire of suitable size and gauge including insulation, Varnishing, drying ,painting etc complete and refixing the same after rewinding and testing complete all as specified and directed.

Supply and fixing in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

S&F in replacement LED Tube light luminaires, 20-22 watts, lumen output not lessthan 2000 (4 feet), made of anodised extruded aluminium housing, with high transmissivity diffuser, high lumen output, with suitable integrated electronic driver, and operated in single phase, 230 volts, 50HZ, all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable of from connector and ceiling rose, complete all as specified and directed.

S&F in replacement mirror light batten type 10 W 230V AC, 50Hz, Pf >0.98, THD <10% on wall complete all as specified and directed by Engineer in charge.

M&L for submain wiring with two single core 6 sq mm FRLSH PVC insulated copper cable 1100 volts grade multi stranded, sheathed conductor in concealed PVC conduit including 6 sq mm multi-strand FRLSH PVC insulated copper wire for earth continuity conductor connected to common earth dolly complete and making good disturbed surface complete. Note:- Cost of PVC conduit, cutting chases on walls and making good disturbed wall surfaces including finishing with cement mortar (1:4) matching with the existing shade / tint are deemed to be included in the rates quoted.

M&L for submain wiring with two single core 4 sq mm FRLSH PVC insulated copper cable 1100 volts grade multi stranded, sheathed conductor in concealed PVC conduit including 4 sq mm multi-strand FRLSH PVC insulated copper wire for earth continuity conductor connected to common earth dolly complete and making good disturbed surface complete. Note:- Cost of PVC conduit, cutting chases on walls and making good disturbed wall surfaces including finishing with cement mortar (1:4) matching with the existing shade / tint are deemed to be included in the rates quoted.

S & F in replacement new generation energy saving and environmental friendly long life 35W LED wall street light made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having top Opening seperate driver compartment with IP66 protection and impact resistance of IK07 including necessary brackets (made out of suitable bore GI pipe light grade appx 0.6 meter long bend to shape) nuts, bolts, etc fixed on walls with MS clamp complete all as specified and directed..

S & F sheet metal enclosure double door for MCB DBs SPN 8 way 240 V, complete flush mounted all as specified and as directed.

S & F single pole and neutral enclouser with a two pin and earth plug and socket complete with one pole MCB 20 Amps complete all as spd and directed .

Supply and fixing 16 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of single pole(SP) in the MCB DB complete with connection testing and commissioning.

S & F MCB Single pole & neutral (SPN) 32-40 Amps, 240 volts , C Curve, AC , 10 kA complete all as specified and directed.

M&L for earthing complete with GI pipe 40mm dia as earth electrode buried directly in ground ( earth pit not less than 2.25 M deep below ground level) with top edge of the pipe not less than 1.5 Metre below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 15 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as shown on electrical plate No. 3 of SSR part - I , including taking out old U/s complete alll as specified and directed .

Supply, laying, jointing and testing in replacement LT cable in trenches or on poles / walls, XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm, 3.5 core all complete.

Supply, install, testing & commissioning of LT panel board "in-door type" factory fabricated (CPRI type tested) with suitable neoprene rubber gasket to make it completely dust & vermin proof & degree of protection not less than IP-43 & general construction confirming to IS-13947, double door, front openable. The panel shall be provided with ventilation facility in the form of louvers for better heat dissipation & tinned copper bus-bar wrapped with coloured PVC tape/sleeves of rating in conformity to the Incoming MCCB rating. The panel board shall be fabricated out of 2.0 mm thick CRCA sheet duly pre-treated & powder coated, supporting frame made out of suitable size angle iron/channel etc. suitable for 3 Ph, 4 wire system 415/440 volts grade incl complete internal wiring with not less than 2.5 sqmm copper wire incl cable glands of suitable sizes incl arrangements for wall mounting complete all as specified & as directed with &incl the following accessories:- BUS-BAR & INTERNAL CONNECTIONS : The bus-bars shall be made up of 04 Nos tinned copper 200 A rated, duly insulated with 1100 V grade standard colour coded PVC sleeves & rigidly mounted on suitable sized "F" class insulators of non-hygroscopic, non-combustible, all internal connections from main bus-bars to switch gears etc. PROVISION FOR CABLE ENTRY : The provision for cable entry/exit shall be provided in the bottom for both incoming& out-going cables. INCOMING : MCCB 4P (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting having breaking capacity 25 KA of rating 100 A incl electric connection complete. OUTGOINGS : (a) S & F MCB, DP, 10KA, 230V, "C" curve, 40 A, ISI Marked complete - 05 Nos (including one no. spare) (b) S & F MCB, DP, 10KA, 230V, "C" curve, 06 to 32 A, ISI Marked complete - 01 Nos. (c) Space for Single Phase prepaid KWH meter - 05 Nos. (d) Indicator lamp with integral circuit (230/240V) & cluster LED (Red, Orange, Blue) - 01 Set.

Supply and laying in trenches brick common burnt clay building brick, sub class 'B' designated- 75 with width equal to length of brick for cable protection complete.

Supplying & fixing to walls and ceilings or laid in floors 25 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed.

S & F 25 mm gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed to pipe complete

M&L for Cutting galvanised mild steel pipe of nominal bore 50 mm or 80 mm for alterations or additions (each cut measured) complete all as specified and as directed.

NOTES: 1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. 2. The rates for RCC/PCC shall deemed to include the cost of formwork, shuttering etc., required for complete and proper execution of the item. Refer Schedule "A" notes for details.

AVASANA SOLUTIONS PRIVATE LIMITED (BID ID -3485037)

M/S PABITRA SAIKIA (BID ID -3485088)

R S TRADERS (BID ID -3489030)