Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.9 LAccepted-AOC 39 359 B PULICKAL THIRUVAMBADY POST ALAPPUZHA KERALA PIN 688 002 | ALAPPUZHA | ALAPPUZHA | KERALA | 688002 | ₹8.9 L Quoted ₹9.2 L | L1 | Accepted-AOC being lowest |
| 2 | L2₹9.9 L+₹78,560 (8.58%)Rejected-Finance 20 2169 PALLURTH PO ERNAKULUM KERALA 682006 | ERNAKULAM | KERALA | 682006 | ₹9.9 L+₹78,560 (8.58%) | L2 | Rejected-Finance Other than lowest tenderer |
| 3 | L3₹10.8 L+₹1.6 L (17.9%)Rejected-Finance KATTUPADATH H AZHEEKAL PO VYPEEN 682508 | KOCHI | ERNAKULAM | KERALA | 682508 | ₹10.8 L+₹1.6 L (17.9%) | L3 | Rejected-Finance Other than lowest tenderer |
| 4 | L4₹10.9 L+₹1.8 L (19.2%)Rejected-Finance | ₹10.9 L+₹1.8 L (19.2%) | L4 | Rejected-Finance Other than lowest tenderer |
| 5 | L5₹12.1 L+₹3.0 L (32.6%)Rejected-Finance | ₹12.1 L+₹3.0 L (32.6%) | L5 | Rejected-Finance Other than lowest tenderer |
Tender Value
₹10 L
EMD Value
₹20,000
Closing Date
8 Nov 2021, 6:00 pmClosed
GE FORT KOCHI
GARRISON ENGINEER MILITARY ENGINEER SERVICES GE FORT KOCHI -682 001
REPAIR TO PLASTER,SANITARY FITTINGS,FLOOR,KITCHEN CABINETS AND CUP BOARDS IN CERTAIN OTM ACCN AT INS DRONACHARYA,MES COLONY AT FORT KOCHI UNDER GE FORT KOCHI
2021_MES_473825_2
8755/E8/GE FORT KOCHI
Open Tender
Civil Works
Item Rate
270 days
FORT KOCHI
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE Fort Kochi
₹20,000
Yes
24 Jan 2022
23 Oct 2021
10 Nov 2021
23 Oct 2021
8 Nov 2021
27 Oct 2021
Amount
Demolition floor, hearth or wall tiling including cement mortar bedding (but not backing ), and remaining rubbish off the premises all as specified and as directed.
M&L PCC 40 mm thick, type B-0, 1:2:4, using 12.50 mm graded stone aggreage as in levelling the average thickness all as specified and as directed.
M&L 15 mm thick screed bedding layers in cement mortar 1:6 for laying floor finishes tiles all as specified .
Rendering cement plaster 10mm thick in CM 1:4 on brick or concrete surfaces , finished fair and even .for receiving wall tiles.
M&L Joint free non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exc. 0.18 sqm in floor.
M&L for glazed ceramic tiles, coloured of size 300 x 400/450 x 7 mm thick as in dado/skirting and riser to steps and jointed in neat cement slurry and pointed in white or coloured cement to match complete.all as specified and as directed.
S & F in repair vitreous china wash down, water closet pan (pedrestal pattern), white including fixing bolts and connection to flush pipe and drain out going pipe and closet seat cover white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified.Make (Parywarwe, Cera or equivalent)
S & F in repairs vitreous china squatting pan "Orissa" pattern size 580 x 440mm white with integral footrests. (Make : Parryware,Cera or equivalent)
S & F in repair vitreous china wash basin, white, flat back, size 550 X 400mm but excluding taps, chain and plug etc, complete all as specified.Make (Parywarwe, Cera & Hindware or equivalent)
S&F in repair CI bracket for Wash Hand Basin/sink/Flushing cistern including taking down of Wash Hand Basin /Sink and refixing in same position and making good as per existing surface complete all as directed
Supply only Plastic water closet seat, black or white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device
All are as per item No 11 above but fixed in repairs.
S&F in repairs Soap dish,SS, approximate size 160x 160x90 mm
S&F in repairs sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long
S&F in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets & flush pipe.
M&L in repairs 75 mm outlet diameter PVC (SWR) floor trap, plain with grating including jointing to waste pipe fixed complete all as specified.
M&L in repairs 100mm outlet diameter PVC (SWR) floor trap, plain with grating including jointing to waste pipe fixed in cement concrete type B-1(1:2:4)
S&F in repairs 15 mm bore dia fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.
S&f PVC connections 15mm size with PTMT nuts of length 450mm
S&f PVC connections 15mm size with PTMT nuts of length 600mm
S & F in repair CP grating 75 mm dia with /without hole complete all as specified
S & F in repair stainless steel kitchen sink 1 mm thick kitchen/laboratories with plug washer and waste and fixing cantiliver brackets and connecting to pipe overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed
All are as per item No 23 above but with drain board of size 915 mm x460 mm and bowl size 410 mm x330 mm x 160 mm.
Toilet paper holder of mild steel chromium plated 'D' type, fixed in repairs to walls with chromium plated brass screws complete.
Towel rail chromium plated, fixed in repairs complete 600mm long
Taking down chowkats or frames with shutters (with out taking off shutters from frame) n exc 1.5 sqm each and making good the damaged surface to its original specification to the entire satisfaction of Engineer- In -Charge.
Taking down chowkats or frames with shutters (with out taking off shutters from frame) exc 1.5 sqm but n.exc 4sqm each and making good the damaged surface to its original specification to the entire satisfaction of Engineer- In -Charge.
S&F Second class plain, solid, straight chowkats and frames, wrought, frames, rebated on the solid, put together, glued at joints
M/L for both side pre laminated MDF board 17/18 mm thick exterior grade fixed with screws to timber frame work in cup board/Pelmet boxes complete all as specified
M/L for fixing in repairs both side pre laminated MDF board 12 mm thick exterior grade fixed with screws to timber frame work in cup board/Pelmet boxes complete all as specified
S&F Butt hinges 100 mm extruded aluminium alloy type C-21, with galvanised mild steel hinge pin, anodised.
S&F 100 mm aluminium anodised, barrel tower bolts of extruded section and fixed.
All are as per item No 33 above but in repairs.
S&F 150 mm aluminium handles, cast type, anodised
All are as per item No 35 above but fixed in repairs
S&F 100 mm size aluminium anodised hasp and staple, safety type, and fixed with screws.
All are as per item No 37 above but fixed in repairs
S&F in repair aluminium hat and coat hooks, solid body, 175 mm to 250 mm
S&f in repair 20 mm dia curtain rods, anodised aluminium alloy fixing with brackets.
S&F in repair 25 mm dia stainless Steel curtain rods with decorative single Knob and brackets on either sides in Doors/Windows as per sample complete all as specified
M&L bands, straps , supports or stays for rainwater, ventilating pipes , including bolts ,if required , hooks (stay) , heavy , for large gates, hook and pintle hinges , large hasps and staples , chains , hand made sliding bolts , clamps , hold fasts , wall ties , hooks for hanging fans , plain angle cleat for securing purlins to wood trusses or rafters , knee piece inserts , two way and three way straps , plate washers and similar small articles .
S&F in repairs urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (minimum weight 60 gms)
S&F in repairs Vitreous China urinals, half stall type (back or corner wall type), complete including providing and fixing plugs beading urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws, pointing around ruinal back in cemernt, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)
S&F Health faucet stainless steel body with 8 mm dia, 1 mtr long flexible tube and wall hook, Model No ALD-CHR-585 of Jaguar or equivalent all as specified.
Demolition of brick masonry built in cement mortar or cement lime mortar.
M & L pre cast cement concrete block masonry with solid blocks type C1, 1:3:6 using 20 mm thick graded stone aggregatge , exc 10 cm in width and setting cement mortar complete all as specified and as directed.
M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of primer.
M&L in repairs for PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints fixed to wall GI brackets /clamps all as specified and directed ( the portion of pipe inserted to the masonery /slab shall be fixed with water proofing bathseal tape two way to the entire width of masonry/slab.) . Note:-Pipe are to be fixed away from the wall using suitable clamps and bolts.
As in item No 49 above but 75 mm dia
Taking down cement plaster of any description on walls including raking out joints, hacking for key scrubbing down with water etc complete all as specified
M&L for rendering cement plaster 15mm thick in cement mortar 1:6 on concrete or brick surfaces of wall and finished even and smooth without using extra cement
Supply and fix in repair 15 mm bore, cast copper alloy, chromium plated bib taps fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed
Supply and fix in repair 15 mm bore, Stop valves, cast copper alloy,fancy type chromium plated with screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.
Jack electrolinks Private Ltd
MS BUILDERS
M/S Babil Industries
PHEJAYS AGENCIES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .