05 /EE/PMD/PHED OF 2024-2025/Sl10

Amount

Supply and delivery at site of 120 sq.mm, 3.5 core, 1.1 kV XLPE insulated Ar. Al. conductor cableConforming to IS: 7098 ( part-I) 2011. Make- PHED Approved Make

Supply and delivery at site of 185 sq.mm, 4 core, 1.1 kV XLPE insulated Ar. Al. conductor cableConforming to IS: 7098 ( part-I) 2011 Make- PHED Approved Make (for taking power from transformer to existing pump house)

Laying of one No. cable above 35 sqmm and upto 185 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed.

Laying of cable above 3½ core 90 sqmm and upto 3½ core 150 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting

Supply delivery & fixing of MCCB Enclosure (Havells/ APPROVED MAKE A-Frame) FP suitable for 160A and 320A loadline MCCB. Make- PHED Approved Make

Supplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating.( on flat iron frame), Make- PHED Approved Make a) 320 Amp

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : a) 3.5 C 120 sq.mm

b) 4 C 185 sq.mn

Finishing of the XLPE/PVC insulated armoured cable ends by soldering with cable sockets and insulated tapes etc., including supplying sockets, soldering materials, tapes etc. and making connection to switch, BDB and BBC etc.3.5 C 120 sq.mm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : 4C 185 sq.mm

Supply and fitting of Puddle collar 150mm dia in the CWR of approved make

Supply delivery & fixing of 150mm dia P.N 1.0 Cast iron double flanged Non- Rising Spindle Sluice Valve generally confirming to IS 14846 (Make- PHED Approved Make) suction line of each pump (existing P.H & proposed CWR P.H) 3 nos. (existing) + 2 nos. (new CWR PH)

Supply of M.S. dismantling joints with Rubber Compression Ring and adjustable follower flanged complete assembled unit with galvanized stud and nuts. 150 mm (for suction and delivery of existing P.H & proposed CWR P.H) of P.N 1.0

Supply and delivery & fixing of following 150mm M.S. Slipon Flanges as per ASA 150#B16.5 for P.H-I & II

Painting of any steel/ iron surface with no. of coats of paints as given below with ready mixed paint/primer of approved make and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint: 1st coat of aluminium paint over one coat of RO priming

Add GST @ 18%

Add CESS @ 1%

COMBINE ENTERPRISES (BID ID -5525349)

PROGRESSIVE ENGINEERS CO OPERATIVE SOCIETY LIMITED (BID ID -5525354)