Renovation of office room at SCT Bhavan FACT UC-Udyogamandal.

Renovation of office room at SCT Bhavan FACT UC- Udyogamandal.

Demolishing and removing old cement plaster and disposal of the debris at places pointed out within a distance of 150M.

Chipping and removing mosaic flooring/ Wall /Floor tiles/ skirting in the halls and other areas very carefully without damaging the remaining portions and water supply items and removing the debris to places pointed out by the department

Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge.

Cement plastering with CM 1:4,15 mm thick one coat floated hard and trowelled smooth at all levels including cost of cement

Providing and laying glazed vitrified floor tiles(GVT) with approved brand and size 1200x600mm or nearest available size (thickness to be specified by manufacturerer with water absorption lessthan 0.08% and cofirming to IS 15622 and fixing floor tiles with cement based high polymer modified quick set tile adhessive(Water based)confirming to IS 15477 in average 3mm thickness and grouting the joints of flooring tiles having joint of 3mm width using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10kg of hardner and 0.20kg of resin per kg), including filling/grouting and finishing complete as per direction of Engineer in charge

Providing, laying and grouting Anti-skid vitrified tifes of minimum 1200x600 mm sizes (thickness to be specifled by manufacturer ) , with water absorption less than 0.08% and conforming to IS 15622, of approved brand & manufacturer in all colours & shades in flooring, laid with :ement based high pofymer modified quick set tife adhesive (water based) conforming to IS 15477, in average 6mm thickness including grouting the joints of width 3 nun , using epoxy grout mix of 0.70 kg of organic coated fiffer of desired shade ( 0.10 kg of hardener & 0.20 kg of resin per kg) , etc. compl-ete ls per direction of Engineer-in-charge.

Providing , laying and grouting Glazed vitrified tiles (GVT) of minimum 1200x600 mm si zes (thickness to be specified by manufacturer) , with water absorption less than 0,08 and conforming to IS: 15622, of approved brand & manufactured in all colours & shades in skirting, risers of steps and dados etc. fix with cement based high polymer modified quick set tile adhesive (water based) conforming to IS 15417, in average 6mm thickness including grouting the joints of width 3 mm , using epoxy grout mix of 0.70 kg of organic coated filler cf desired shade ( 0.10 kg of hardener & 0.20 kg of resin per kg), etc. complete as per Cirection of Engineer-in-charge .

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one priming coats with primer of approved brand and manufacture,With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Wall painting with two coats of premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.

Providing and fixing wall panelling with 8mm BWR grade plywood pasted with 1mm laminate(Merino, Green or equivalent approved brand) and framed with 18mm BWR grade plywood as per design. All visible faces to be edge banded withapproved colour lipping. All laminates to be hot pressed on BWR grade ply including cost of all materials and labour.

Providing and fixing false ceiling at all height including providing and fixing of frame work all as per detailed specification noted in Special Conditions of work Clause No. 5 and as per the direction of the Engineer in Charge but excluding the cost of painting with :12.5 mm thick tapered edge moisture resistant gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS certification marks)

Providing and fixing PVC door of syntex or equivalant make with shutter frame made of extruded plastic section having dimension of 60 x 24 mm or nearest, paneling with single panel hollow plastic section of 20 mm thick with average wall thickness of 1 mm and outer frame of door made of extruded plastic section of 48 x 40 mm or nearest including providing and fixing all required fittings such as stainless steel butt hinges, PVC tower bolts, PVC handles etc.complete as per manufacturers specifications.

Supplying and fixing PVC floor trap (single or multy type) of approved brand 110 mm size with required provision of outlets and inlets as per manufacturers specifications, cutting and making good the walls and floors, etc. complete.

Supplying and fixing 125 mm (5 inch) Stainless steel floor gratings (two piece) to PVC trap as per instructions at site

Supplying conveying and fitting 550x400mm or nearest size wash hand basin of white glazed vitreous china approved quality with a pair of special alloy bolts for fixing the basin on walls with 1No. 15 mm heavy type CP brass pillar tap of approved make 1No.heavy type 15 mm PVC connection and 1No.15 mm CP regulating valve of superior make ,1No. 15mm CP waste coupling,32mm PVC waste pipe with cp learning nut 1No. etc. including cutting and making good the walls,etc. complete.

Supplying and fixing at all levels approved quality /brand European type vitreous china white glazed water closet pan with P/S trap and White/Black duro plastic seat and lid with CP brass hinges and CP rubber buffers, 10 litre capacity PVC low level flushing cistern of approved make with all fittings 1No.32mm CP brass flush bend, 1No:15mm superior PVC connection heavy type ,15mm CP regulating valve,cutting and making good the walls and floors including giving connection to sewer pipe with all necessary specials,etc. complete as per direction at site

Supplying Angle valve with wall flange of standard range (CERA, JOHNSON or equivalent)

Supplying Long body bib cock of standard range CERA/JOHNSON or equivalent type

Supplying to Civil store 100 mm CP brass shower rose with 15 mm / 20 mm inlet and of approved brand / manufacturer

Supplying and fixing 600 x 450 mm or nearest size bevelled edge mirror of approved quality superior make " with hard board or plastic sheet on the rear and fixing the same in position with necessary plugs & SS screws etc complete

Supplying and fixing 600 x20 mm or nearest Stainless steel heavy duty approved brand towel rod with brackets with necessary SS screws, pastic grips etc. complete

Supplying and fixing Health faucets of standard range approved by Engineer-in-Charge (CERA,JOHNSON or equivalent brand)

Supplying and fixing best quality SS soap dish including cost of screws, wooden plugs etc.

Supplying and fixing Concealed Stop cock ¾ inch “CERA/ JOHNSON/ PARRYWARE or equivalent type

Supplying, laying and jointing with solvent cement, Rigid PVC pipes conforming to IS 4985 Class V (10 Kg/cm2 pressure rating) for water lines with all required concealed (brass embeded) PVC specials, such as Tees, bends, elbow, union, reducer etc. with clamps if any including necessary cutting and making good the walls, earth work if required etc.complete for 25 mm OD Pipe

PILLARRA VENTURES PVT LTD (BID ID -3322313)

WE CARE TOTAL BUILDING SOLUTIONS (BID ID -3328712)

T K SALIM (BID ID -3320113)

SANUSH TH (BID ID -3328843)