Restoration of rain damages on Ballah to Trutibat via Kholi road ( Under PDNA) BW

C/O Work of Approaches, Wearing coat Approach Slab of existing 10.00 mtr span culvert over Tanda Nallah

Providing and laying mechanically mixed and vibrated reinforced cement concrete of grade M-30 (M- Thirty) designed mix with minimum cement contents of 430 kg (Four hundred thirty kilogram)per cubicmeter with 20 mm (Twenty milimeter) nominal size graded crushed stone aggregate and curing complete in wearing course including reinforcement for reinforced concrete work and form work as per drawing and technical specifications clause 800 & 1206.3 and as per the directions of the Engineer-in-Charage including carriage of material within all leads and lifts and other incidentals .The rate is including of octroi, royality, Malkana, toll tax or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete design mix to obtain minimum compressive strength of grade M-30 (M- thirty) using minimum cement contents of 407 Kg (Four hundred seven Kilogram) per cubic metre in approach slab including reinforcement complete with bending, binding, straightening of bars, cost of binding wire and cost of curing and form work complete in all heights / depths as per drawing and MORT&H technical specifications section 1500, 1600, 1700, 2700 and as per the directions of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing drainage spouts complete as per drawing and MORTH technical specification section 2700 and as per direction of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidentals. The rate is including octroi, royality, Malkana, tolltax, GST or other taxes imposed by the government.

Providing and laying mechanically mixed and vibrated plain cement concrete in open foundation for all type of structure complete of plain cement concrete nominal mix 1:5:10 (One cement : five sand : ten graded crushed/broken stone aggregate 20mm (twenty millimeter) nominal size including curing complete in parapets and the like etcetera including the cost of form work as per drawing and M.O.R.D technical specification clause 802, 803, 1202 and 1203 as per the direction of Engineer-in-charge including carriage of material within all leads and lifts and other incidental. The rate is including octroi, royality, malkana,toll tax, GST or other taxes imposed by the Government.

Providing and laying 100mm dia ( One Hundred millimetre) diameter P.V.C. pipe weep holes in brick masonry/ stone masonry, plain/reinforced concrete abutment, wing wall, return wall and retaining/breast walls through the full width of the structures with slope of 1(V): 20 (H) (one vertical: twenty horizontal) towards draining face complete as per drawing and M.O.R.D. technical specifications clause 709 and 1206.6 and as per the entire satisfaction and direction of Engineer- in-Charge including carriage of materials within all leads and lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Back filling with granular material behind abutments, wing walls, return walls complete and retaining walls complete as per drawing and MORD technical specifications clause 1203 and 1604 and as per the entire satisfaction and direction of Engineer-in-charge including carriage of material within all leads and lifts and other incidental. The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Construction of embankment with approved materials deposited at site from road way cutting and excavation from drains and foundations of other structures or other sources graded and compacted in 200mm( two hundred millimetes) thickness in every layers and compacted with three Wheel Road Roller 80-100 ( eighty-hundred ) KN static weight roller to meet the requirement of tables 300.1 and 300.2 as per M.O.R.D. technical specification Clause 301 and 1603.5 and as per the entire satisfaction and direction of the Engineer- In –Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.