Kharmasa peyjal yojna in Vikas khand Kashipur of Distt Udham Singh Nagar under jal jeevan mission programme

Amount

Construction of 1No. 200mm dia, 150Mt. deep Tubewell.

Transportation of Rig machine, Air compressor O.P. unit and T & P and other equipments up to site & back transportation after completion of work-

Installation of Rig machine, camp equipage after site clearance

Drilling 450 mm dia size final bore from G.L to 150 MBGL.including arrangement of water, Geophysical logging of bore well, (If required ) feeding of pea-gravel& collection of strata sample in box

Preparing and Lowering of 200 mm dia plain/slotted pipe tube well assembly form G.L. to 150 MBGL.

Dismantling of Rig machine after completion of work. Fitting of girder and clamp, well cap.with site clearance-

Supply of material for tubewell assembly

Supply of 200 mm dia 8.0mm thick MSERW plain pipe.

Supply of 200 mm dia 8.0mm thick MSERW slotted pipe.

Supply of 200x100 mm dia size M.S. Girder 4Mt Long

Supply of 200 mm dia Bail pulg with hook.

Supply of M.S heavy duty D.E. clamp suitable for 200 mm dia.

Supply of 200mm dia well cap.

Supply of Pea gravel 2.0 mm to 4.00 mm

Development of Tubewell by 350 PSI/1100CFM air comperssor.

Development by Air compressor including erection of Air compressor unit and dismantling after work as per specification.

Development of Tubewell by O.P. unit of suitable capacity.

Development by O.P unit to get sand free discharge of 500 LPM including erection of O.P. Unit and dismantling after work as per specification.

Geohydrologgical survey of site

Chemical & Bacteriological Test of water

S.I.T.C. of Solar Submersible Pumping Plant with Accessories for Tubewell

Supply of submerisble solar A.C/D.C pump with adequate capacitysuitable for 200mm dia Assembly , motor complete with 1.0 Meter cable complete in all respects for 144000LPD /400LPM at 65Mtr Head, 10 HP.

Supply of Spare pump of same duty cycle

Supply of solar hybrid pump controller (Control panel cum starter) suitable for above pump- motor set also suitable for on grid supply as per following parameters . (i)Inbuilt MPPT Tracking facility ensuring overload under over voltage protection force air time of lack of radiation (ii) Parameter display facilities (iii) Auto reset after every fault (iv) Dry running protection to avoid dry run of motor

Solar photo voltage poly crystalline solar module 9000wt. Minimum As per IEC standrard (for above pump) including Chain link/wire mesh fencing system of suitable size to protect solar PV module system From unathorized intrusion.

Supply of main piping & valves as per scope of work and technical specifications

Tools

Construction RCC Foundation with suitable foundation Nut, Bolts and Supply & fitting of G.I. Solar Panel mounting structure including panel mounting clamp, pole etc complete in all respect.

Installation, commissioning and setting to work and testing of entire equipment installed at site including supply of necessary fixing accessories like insulation, teflon tape etc.

6sq.mm x 3 core copper flexible cable

Chain Pulley block of 2.0 tonne capacity 4Mt. Lift.

Rubber insulation sheet 1 Mt. x 2Mt.x 0.025Mt

Lightening arrestor, Copper strip, Earth kit and Chemical earthing as per latest IE rules has to be provided for Cathodes and rest as per normal GI earth strips from cathode to different equipments

Internal & External Electrification of pump house for Proposed Tubewell

One month Trial Running & Five month operation, Maintenance including watch & ward.

H N SINGH AND COMPANY