REPAIR/ MAINT OF B/R and E/M AT CERTAIN LOCATION OF MES LIVING ACCN AREA AND AGE OFFICES UNDER GE NORTH BINNAGURI

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footpath, parks,lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mold, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand all as specified and as directed including demolition of cement concrete unreinforced.

S&F rolled mild steel work in tubular trusses MS pipes in vertical column,parlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161 of 1979 grade st 240 with one shop coat complete including dismantling of wrought iron and mild steel complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including dismantling of sheet and directed.

Taking down Chowkats or frame exc 1.5 SqM but n.exe 4 Sqm each without taking off shutters from the frame. complete all as directed and as specified.

Taking down shutters of any description exc 1 Sqm and n.exc 2.00Sqm each and removing from site. complete all as directed and as specified.

S&F of pressed steel framed for door with one or more rebates including necessary fixing lugs, hinges, lock strike plates, size of frame 125 X 60 mm, 1.25mm thick complete all as specified and as directed.

S&F of factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with 19x19mm MS square tube and 1.2mm wall thickness complete all as specified and as directed.

S&F of pressed steel framed for door with one or more rebates including necessary fixing lugs, hinges, lock strike plates, size of frame 105 X 60 mm, all as specified and as directed.

S&F of 35mm thick 2nd class hard wood factory made, plain, framed, panelled shutter (two panel) with lock rails and panel of 9mm BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 Part-I klin seasoned and chamicaly pressure treated.

S&F for factory made 35mm thick 2nd class hard wood gauged and skeleton shutter open rebated and prepared to received gauge etc (without sash bars) for fly proof door shutter, edges of framing plain, chamfered or rounded, fitted with cut of any mitred beads for securing gauge etc, size of members of shutter as specified in SSR Part-I section 8 clause No.8.23(a) and fitted to chowkats complete all as specified and as directed.

S&F of factory made solid panel PVC door shutter, 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails MS frame shall be covered with heat moulded plain clolur PVC `C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stile and plain clolur PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, suppling & fixing in the frame at site as per manufactures instruction, specification.

Easing of door shutters for properly closing/opening, tighting of hinges or changing the position of hinges, adjustment of tower bolts sliding bolt etc complete all as specified.

Refixing of shutter exc 1 Sqm but n. exc 2 Sqm after necessary repairs in the same opening all as specified and as directed.

Taking down shutters with wooden frame of cupboard of any description exc 1 Sqm and n.exc 2.00Sqm each and removing from site.

M&L for 18/19 mm thick Prelaminated particle board, interior grade,prelaminated both side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work all as spd as diracted.

S & F Continuous (piano) hinges,mild steel, bright finish or electrogalvanised all as spd as directed.

S&F of mild steel butt hinges, medium weight cold rolled of size 100mm complete all as specified and as directed.

Taking down old/ rusted verandah net/jali including frame of any description etc complete all as specified and directed.

S&F rolled mild steel equal angles framed work confirming of Fe-290 (Gde-E-165) including welding, drilling for holes as necessary for fixing door frame, verandah jali, mesh and staple etc complete including dismantling of wrought iron and mild steel all as specified and directed.

S&F MS flat iron as in support for veranda jali,mesh including welding, drilling holes and fixed to frame with nuts red sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc confirming to Fe-290(Gde-E-165) etc complete including dismantling of wrought iron and mild steel all as specified and directed.

S&F in repair of aluminium handles cast type anodised 150mm of size.

S&F in repair of 150mm long aluminium anodised barrel tower bolt of extruded section and as directed.

S & F in repair 150 mm long Mild steel barrel tower bolts, stove enameled black, with bright bolt.

S & F in repair 150 mm long Mild steel pressed handles, oval type, stove enamelled black.

S&F in repair Aluminium alloy anodised sliding door bolt 250 mm long with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section

S&F in repair steel window with side hung shutters incl. projecting type hinges with steel handles steel peg stay fixing lugs complete with glazing bar 10 cm devetailed or welded incl shop coat red oxide primer as per drag No CESZ/2018/TD-07, sheet 1/3 to 3/3 compete all as specified and as directed.

All as per item No 26 above but without glazing bars complete all as specified and as directed.

All as per item No 26 above but fixed type

S&F in repair steel ventilator top hung shutter including hinges, steel peg stay, fixing lugs etc complete with or without glazing bars complete all as specified and as directed

M&L for mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; ramework of water tanks and similar work con- forming to Fe.290.Gde-E-165

M&L for preparation of new or previously untreated steel and Iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of Synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

M&L for preparation of new or previously undecorated wooden surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of Pink primer complete all as specified and as directed.

Hacking out old broken unserviceable glass panes (any thickness, size, quality or description) for metal frame including punching or drilling out old glazing pins/spring clips and providing & fixing new one. complete all as specified and as directed

S&F of 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as directed.

M&L for PCC type C-1, 1:3:6 using 20mm graded aggregate as in bed block for fixing of hold fast, filling concrete in frame filling , gaps in between glazed & flyproof steel window, cills, railing up to 60 cm in height etc including necessary form work as required complete all as specified and as directed

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and as directed

S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and as directed

M&L for brick works with fly ash bricks straight or curved on plain exc 6m mean radius built in cement mortar 1:6 including demolition of brickwork built in cement mortar complete all as specified and as directed

M&L for 15mm thick rendering in cement mortar (1:4) on fair faces of brick walls or concrete surfaces in mixed with water proofing compound by weight of cement or as per manufacturer instructions, finished even & fair without using extra cement all complete including Taking down cement plaster on wall of any description complete all as specified and as directed. Note: Liquid water proofing compound will be measured and paid separtely.

M&L for rendering 5 mm thick cement plaster on ceiling cement mortar (1:3) complete all as specified and as directed including Taking down cement plaster on ceiling of any description finished even & fair without using extra cement. complete all as specified and as directed

M&L for rendering 15 mm thick cement plaster on other than fair surfaces of brick work in cement mortar (1:6) complete including Taking down cement plaster on wall of any description finished even & fair without using extra cement. complete all as specified and as directed .

Supply only liquid integral water proofing compound. complete all as specified and as directed.

M&L for for preparation of newly wall plastered surfaces and applying three coats of white wash on wall to match the existing colour as specified as directed.

M&L for preparation of newly ceiling plastered surfaces and applying three coats of white wash on wall as specified as directed.

M&L for for preparation of newly wall plastered surfaces and applying three coats of white wash on wall to match the existing colour as specified as directed.

M&L for one coat of distemper oil emuldion on of old surface of wall include brooming down or steel wire brushing; scrapping down smoke soot, molds, moss and efflorescent salts and trading oil and greasy spots complete all as specified and as directed.

M&L for one coat of white wash on ceiling of old surface with preparation of old surface shall include brooming down or steel wire brushing; scrapping down smoke soot, molds, moss and efflorescent salts and trading oil and greasy spots complete all as specified and as directed.

M&L for Granite (of any type)15-18 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and olishing and dismantling floor,hearth and tiling complete all as specified and as directed.

M&L for 15mm thick screed bed or bedding layer of cement mortar 1:6 for floor finishes complete all as specified and as directed.

M&L non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling floor,hearth and tiling. complete all as specified and as directed.

M&L Glazed ceramic coloured tiles in vertical surface 350x250x7/450x350x7mm thick set and jointed in neat cement slurry and pointed white or colour cement to match as specified as directed including dismantling floor,hearth and tiling.

M&L non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling floor,hearth and tiling.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces to recive a wall tiles using cement morter 1:4 as specified as directed.

M&L for 75 mm thick cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate in plinth protection finished fair and even without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 meters and every change of direction and filling the same with & including bitumen and sand 1:3 by weight of grade 'A' complete with and including necessary form work etc complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of 15 mm bore complete all as specified and as directed.

S&F of Tubes, medium grade, 15mm bore, galvanised, with all fittings and fixed complete to wall and ceilings or laid in floors complete all as specified and as directed.

Refixing of old steel tubing and connections in new or old position (wall, ceiling, floors, etc) of 15 mm bore

M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth in brick walls complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of 20 mm bore complete all as specified and as directed.

S&F of Tubes, medium grade, 20 mm bore, galvanised, with all fittings and fixed complete to wall and ceilings or laid in floors complete all as specified and as directed.

S&F 500 ltrs capacity rotational moulded polythelene water storage(cylindrical vertical with closed top) hoisted and fixed in positions all specified in SSR Part I Dismantling water tank exc 500 & n.exc 1000 ltr capacity. complete all as specified and as directed.

S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size including CP waste coupling, PVC connection 450 mm long, waste pipe & removing the existing Basin, cutting for and pinning ends of brackets or erecting stand. complete all as specified and as directed. complete all as specified and as directed.

S&F vitreous China squatting pan"Orissa" pattern size 580x440mm white with integral foot rests(excluding flushing cistern and flush pipe) with 'P' or 'S" trap from or back inlet etc including connection to trap tand flushing pipe and provision of cement concrete bedding complete all as specified and as directed in repairs including demolition of existing one

S&F in repair 10 ltr capacity PVC flushing cistern low level white colour incl PVC connection 450 mm long, PVC flush pipe of reqd length etc complete all as specified and directed.

S&F in repair EWC Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and as directed.

S & F in repair grating doom 125mm dia with waste hole of PTMT (min wt 40 gms) Complete all as specified and as directed.

S&F in repair 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

M&L for PVC pipe incl fittings and S&F 110mm dia PVC SWR pipes single socketed in any length with rubber ring joints, fixed to wall including taking down. complete all as specified and as directed.

S&F 110mm dia PVC SWR bends of any radius with out access door complete all as specified and as directed

S&F 110mm dia PVC (SWR) junction single 'T' equal or unequal with access door Complete all as specified and as directed.

S&F 110mm dia PVC (SWR) branch piece, single ‘Y‘ equal or unequal Complete all as specified and as directed.

M&L RCC type B1 (1:2:4) using 20 mm graded aggregate in Fins, fascias, louvres, parapets, and railings , newels, balustrade & the like Demolition of reinforced concrete of any description. Complete all as specified and as directed.

Formwork to fins, louvers, fascia. etc Fair finished surfaces of concrete flat Complete all as specified and as directed.

M&L for Mild steel TMT bars 6mm to 8mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality Complete all as specified and as directed.

ELECTRIFICATION Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit including removal of batten/ conduit/ gutties/ wooden boards/ switches/ sockets/ regulators/ light fittings etc and separating the serviceable items like fan regulators and light fittings for re-use under respective items and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified.

Taking down carefully existing old/unsv sub main wiring of any size/description as existing at the sit including making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified.

M&L for concealed conduit point wiring with 1.5 Sqmm (nominal cross-sectional area) PVC insulated unsheathed single core copper cable working voltage 1100 volts grade conforming to IS-694 with stranded copper conductor in and including PVC conduit of adequate size with all accessories (including cutting chases & making good the disturbed surface to its original specification) including MS sunk box, 3mm thick hylum sheet top cover fixed by means of brass machine screw and cap washer including size 1.5 sq mm (nominal cross sectional area) PVC insulated unsheathed single core multistranded copper conductor cable as earth continuity conductor connected to main switches/DB's or common earth dolly complete all as specified and directed for one Light point controlled by one, one way switch complete all as directed and as specified.

All as per item No 78 here in before but for one Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator complete all as directed and as specified.

All as per item No 78 here in before but for one 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. complete all as directed and as specified.

All as per item No 78 here in before but for one 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board. complete all as directed and as specified.

All as per item No 78 here in before but for one bell point controlled by one, bell switch 5 Amps complete all as directed and as specified.

All as per item No 78 here in before but for light point controlled by two way switch Amps complete all as directed and as specified.

All as per item No 78 here in before but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combination point incl running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly. Complete all as directed and as specified.

S & F switch piano single pole flush type 5 amps, 230 volts one way complete all as specified and as directed.

S & F bell push flush type 5 amps, 230 volts.complete all as specified and as directed.

S & F switch piano single pole flush type 5 amps, 230 volts two way complete all as specified and as directed.

S&F socket outlet 2 in 1, 5 Pin, 5/6 amps, white ivory finish flash type complete all as specified and as directed.

S & F switch piano single pole flush type 15 amps, 230 volts one way complete all as specified and as directed.

S&F Switch socket combination 2 and 3 Pin, 5/6 amps, multipurpose flush non shutter, non inter locking type white ivory finish with, complete all as specified and as directed.

S&F of socket outlet 2 in 1, 5 Pin 5/15 Amp multipurpose 230 volt flush type complete all as specified and directed.

S&F in replacement ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and as directed.

S & F lamp holder, insulated body, with back plate suitable for batten/angle fittings complete all as specified and as directed.

S & F Call bell Ding dong, 230 Volt single phase all as specified and as directed.

S & F deluxe fan Electronic regulator 120/280 volts AC 50 Hzs rotary step white/ivory finish complete all as specified and as directed.

S&F in replacement hylam sheet 3 mm thick white in colour of size 130 mm x 180 mm including taking down existing unserviceable complete all as specified and as directed.

S&F in replacement hylam sheet 3 mm thick white in colour of size 120 mm x 170 mm including taking down existing unserviceable complete all as specified and as directed.

S&F in replacement hylam sheet 3 mm thick white in colour of size 230 mm x 280 mm including taking down existing unserviceable complete all as specified and as directed.

S&F in replacement hylam sheet 3 mm thick white in colour round type of size 80 mm dia including taking down existing unserviceable complete all as specified and directed.

S&F in replacement LED tube light 1 X 20 W (or nearest next higher wattage) (4feet), 5700K, wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up with and including necessary taking down the old unserviceable fitting complete all as specified.

S & F in replacement Inverter retrofit tube light of 20W with square profile and polycarbonate channel, lithium Ion battery with charging time 8 Hours-10 Hours and backup time upto 4 Hours with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose including taking down / dismantling of old existing unserviceable one complete all as specified and as directed.

S & F in replacement Energy saving new generation environmental friendly long life versatile pressure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete incl removal of old unsv fitting all as directed

S & F in replacement Post top lanterns 15 watt LED light fitting ,new generation, energy saving, environmental friendly, longlife with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source, spun aluminium canopy, with opal/clear acrylic diffuser and complete with all accessories internally prewired including connecting up with three core twisted flexible copper conductor cable up to ceiling rose and necessary mounting arrangements, including taking down / dismantling of old existing unserviceable one complete all as directed by Engineer-in-charge.

M&L for sub main wiring with 2 run of 6.00 sqmm (nominal cross-sectional area) PVC insulated unsheathed single core FRLS cable of working voltage 1100 volts grade with stranded copper conductor including one run of 6.00 Sqmm (nominal cross sectional area) PVC insulated unsheathed cable with stranded copper conductor as continuous earth wire connected to common earth dolly drawn in PVC rigid non- metallic concealed conduit complete all as specified and as directed.(NOTE : (i)Two run of submain wiring cable along with one run of earth wire with and including 25 PVC conduit pipe shall be measured as one unit length).

M&L for sub main wiring with 2 run of 4.00 sqmm (nominal cross-sectional area) PVC insulated unsheathed single core FRLS cable of working voltage 1100 volts grade with stranded copper conductor including one run of 4 Sqmm (nominal cross sectional area) PVC insulated unsheathed cable with stranded copper conductor as continuous earth wire connected to common earth dolly drawn in PVC rigid non- metallic concealed conduit complete all as specified and as directed. (i) Two run of submain wiring cable along with one run of earth wire with and including 25 PVC conduit pipe shall be measured as one unit length)

M & L in replacement for sheet metal enclosure fabricated out of 2.0 mm thick CRCA sheet, totally enclosed type, dust & vermin proof, with suitable sized supporting MS angles & suitable openings at top & bottom for entry of outgoing / incoming cables, fixed with nuts & bolts & front side openable with hinged shutter with suitable locking arrangement duly painted with 2 coats of powder coated paint over a coat of red oxide primer (spray paint) with minimum dimensions (90 x 75 x 20 cm ) flush to wall for incorporating 01 No TPN DB, 04 Nos electronic meters etc including taking down / dismantling of old existing unserviceable one complete all as specified and as directed.

S & F in replacement sheet metal enclosure MCB DB TPN 4 way with 200 amps rated bus bar 415 volts double door with magnetic locking system complete including removal of old unsv sheet metal enclosure all as specified

S & F in replacement sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with S&F MCB distribution boards (DBs) with sheet metal enclosure, double door, IP 43 protection, 240 Volts, 8 way, single pole and neutral, with 200 Amps rated copper bus bar (as per OEM), neutral link, ertth link earthing studs, suitable for fixing MCBs, without MCBs fixed flush to wall/other surface including taking down of old unsv sheet metal enclosure all as specified.

S&F in replacement MCB, Triple pole & neutral 63 amps, 240 volts, ‘C’ curve, 10KA complete all as specified and as directed.

S&F in replacement MCB, Single pole & neutral, 32 to 63 amps, 240 volts, ‘C’ curve, 10KA all complete with and including taking down old unsv one as specified and as directed.

S&F in replacement MCB, Single pole, 5 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete with and including taking down old unsv one as specified and as directed.

Material and labour for earthing complete with galvanized steel plate electrodes of size600x600x6mm thick buried directly in ground with earth pit not less than 2.25 meter deep below normal ground level with top edge of plate not less than 1.5 meter below normal ground level connected to galvanised wire 4.00 mm earth lead by means of nuts, bolts, checknuts and washers including 15 mm bore galvanized iron pipe, medium grade for protection of earth lead upto the length of 7.5 meter towards test terminal and 20 mm bore galvanized iron pipe, medium grade for watering, and providing of charcoal and common salt in alternate layers, including necessary earth work in any type of soil and including PCC pit in PCC 1:2:4 with provision of wire mesh and funnel, complete all as shown in electrical plate No 5 of SSR Part- I including testing on completion & taking down old existing unserviceable one complete all as directed and as specified.