PROVISION OF 04 X TOILET CUM BATHROOM BLOCKS AND 02 X SHEDS ALONGWITH INTERLOCKING TILES AT MIL STN DHRANGADHRA

Amount

Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in harde/dense soil complete all as specified and as directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5M in depth for foundation etc and getting out in hard/dense soil complete all as specified and as directed.

Excavation in post holes (or similar holes) in soft/disintegrated rock each not exc. 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc. 25cm in soft/loose soil and getting out complete all as specified.

Excavation in trenches ,n exc 1.5m wide and n exc 1.5mtr in depth for foundation etc or for shafts ,well cesspts ,manholes etc n exc 10sqm on plan and n exc 1.5mtr in depth and getting out in soft / disintegrated rock complete all as specified and directed.

Returning filling including spreading, levelling, watering and well ramming in layers n exc. 25cm (hard/dense soil) complete all as specified and directed.

Returning, filling in, including spreading levelling watering and well ramming in layers not exc 25 cm in soft /disintegrated soil.

Removing excavated material (rock) exc. 250m but n.exc. 500m and depositing where directed.

Filling under floor (except material) including spreading, levelling, watering and well ramming in layers n exc. 25cm complete all as specified.

Removing excavated material (hard dense soil) n .exc 50 m and depositing, where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed.

M&L PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.

M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and bindind with ms wire (annealed) not less than 0.9mm dia quality confirming to all as specified.

Description same as above but, 5 mm dia and over and incl 10mm dia in stirrups, spacers and binders

M&L RCC (Nominal Mix) Type B0 1:2:4 using 12.5 mm graded stone aggregate as in beams, cantilever, lintels etc complete all as specified and as directed.

M&L form work to sides and soffits of roof beams, lintels lever shelves including supports over hang etc rough finished surfaces of concrete flat all as specified.

M&L providing cement concrete 1:2:4 of type B0 using 12.5 mm graded stone aggregate 40mm thick as in damp proof course to horizontal or slapping or vertical incl. necessary form work and applying evenly a coat of blown type bitumen at the rate of 1.50 Kg per sqm and binding with clean dry sand @ 0.05 cum per sqm complete.

M&L precast cement concrete Block Masonary with solid blocks type C1 1:3:6 20mm graded stone aggregate exc 10cm in width and setting in mortar 1:6 complete all as specified and directed .

M & L 15 mm thick cement plaster on fair faces of brick work or concrete surface on wall in cement mortar 1:4 finished fair and even complete all as specified and directed.

M & L 15 mm thick cement plaster on other than fair faces of brick work or concrete surface on wall in cement mortar 1:6 finished fair and even complete all as specified and directed.

M&L 5mm thick rendering in cement mortar 1:4 on ceiling, soffits, chajja projection complete all as specified and directed

M&L precast cement concrete Block Masonary with soilid blocks 1:3:6 type C1 using 20mm graded stone aggregate exc 10cm in width and setting in mortar 1:6 complete all as specified and directed .

M&L for hard core of broken stone or boulders gauge n.exc 63mm deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface of broken bricks aggregate, all as specified.

M&L for 100mm thick PCC 1:4:8 of type D-2 using 40mm graded stone agrregate as in sub base of floors etc complete all as specified and directed.

M&L PCC 25mm thick 1:2:4 of type B1 using 20mm graded stone aggregate as floor finishing surface complete all as specified and as directed.

M&L for PCC 1:3:6 type C-2, using 40mm graded stone aggregate as in plinth protection laid in alternate panels 75mm thick finished even and smooth w/o using extra cement complete all as specified and as directed..

M&L for PCC in 1:5:10 type E-2 using 40 mm graded stone aggregate as in subbase of floors etc, complete all as specified and directed.

M&L for forming construction joints 30mm deep x10mm wide filled with sealing compound grade "A" complete all as specified and as directed.

S&F, factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fit-ted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube and fixing in opening as per specification complete all as specified and directed

S & F Butt hinges 100mm, extruded aluminium alloy with galvanized mild steel hinge pin, anodised of type B-22 and complete all as specified and as directed.

S&F 200mm aluminium anodised barrel tower bolts of extruded section all as specified

S& F 125 mm extruded aluminum alloy handles, fabricated type anodised and complete all as specified and as directed..

S & F M.S. Framed work such as grills grating etc. with ends of bars sholdered and / or riveted into spikes, framed guard bars / railings all as directed.

S&F roof trusses (framed) ,trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (beam ,tee ,angle ,channel or flat sections ) including distance pieces ,cleats etc .in Fe 410 w (Gde-E -250) quality-B complete all as specified and directed.

M&L for rolled sections as in framing for cladding, stiffner,glazing and the like fixed with angle cleats and connecting plates, etc in Fe -290(Gde E-165) complete all as specified and as directed.

M&L for three coats of white wash on ceiling/Chhajja (undecorated) surfaces incl preparing of surfaces complete all as specified and directed.

M&L three coats of white wash on walls including preparation of new plastered surface and complete all as specified.

M&L for Preparation of new (Previously untreated) plastered surfaces of walls and applying two coats of cement based paint on walls, complete all as specified and directed

M & L preparation of new steel or iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified

S&F non-skid ceramic tiles 7 to 8mm thick area of each tile exceeding 0.11 Sqm but n exc 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor over and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

M & L glazed ceramic tiles area exc 0.11 Sqm but n.exc 0.18 Sqm on walls etc set & jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces over &.incl 10mm thick rendering in cement mortar 1:4 for laying wall tiles etc complete all as specified and directed.

M&L for rubber moulded chequered cement concrete coloured tiles 25 mm thick ,area exc 0.06 sqm but n.exc 0.16 sqm with grey cement and pigments, set & jointed in neat cement slurry and pointed with cement & suitable coloured pigment to match the tiles in floors over and including 20 mm thick screed bed in CM 1:6 completee all as specified and as directed.

Cutting chases in brick wall, stone concrete block or slab walls, pining in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings ,steps,cills sunshades, shelves , lintels, etc and cutting chases for concealed water tubing and making good , cutting n'exc 10 cm girth complete all as specified and directed.

S&F rolled mild steel section as in main and cross beams hip and jack rafters , purlins where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates conforming to Fe-290, Gde E-165 all as specified and directed.

M & L, Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws in single length complete all as specified and directed.

M & L Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.

S&F 15mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed.

S&F 20mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed.

S&F 20 mm bore Gate valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed complete all as specified and directed.

S&F 15 mm bore dia Stop/angle valves fancy type Chromium plated screwed down , high pressure , with capston head, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F 15mm bore dia Bib taps chromium plated with capston head, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed .

Granite (of any type of coloured) work (table rubbed and polished) 20mm thick in steps jambs,pillars, window cills, cooking plateform /partition and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed in cement mortar 1:6 incl moulding, chamfering of edges complete all as specified and directed .

S&F Pillar taps droop swan Neck cast copper alloy with capstan heads CP screwed down for 15mmGI iron pipe and fixed all as specified and as directed.

Supply & Fix vitreous china counter top wash basin oval shape, size 550 x 400 mm including PVC waste pipe and waste coupling fixed complete all as specified and directed.

S&F 50mm PVC (SWR) pipes single socket in any length and including bends and sockets complete all as specified and directed

S&F aluminium peg sets of 6 pegs complete all as specified and directed

S&F 450mm long PVC Connection 15mm size with PTMT nuts complete all as specified and directed.

S&F 600x450 mm bevelled edge mirror of slected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plug with chromium plated brass screws and cup washers complete all as specified and directed.

S&F Brass chromium plated Tubular towel rail , 20mm dia, D type , 60cm long between falnges complete all as specified and directed.

Supply & Fix vitreous china urinal, Half stall type, white (excluding flushing cistern) incl providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal back in cement, fixing flush pipe, grating and union for discharge pipe incl supply and fixing of 32mm bore 60mm long discharge pipe complete all as specified and as directed.

S & F vitreous china squatting pan of ‘Orrisa pattern’ size 580x440mm, white with integral foot rest including replacement of ‘P’ or ‘S’ trap, lime concrete bedding and making good floor complete all as specified and directed.

S&F PVC valveless, syphonic action type, flushing cistern, 10 lits capacity low level, white, with inlet, ball valve, float and handle including brackets, flush pipe and connection to pipes complete all as specified and directed.

S&F rotational moulded polethylene water tank of 1000 ltrs capacity ( cylindrical vertical with closed top) noticed and portion all as pacific SSR Part- I.

S&F 20mm bore dia of pipe Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm -210 gms ) complete all as specified and directed.

S&F PVC (SWR) floor trap with CP grating including jointing to waste pipe 75 mm bore outlet with solvent cement all as specified.

S&F PVC (SWR) bends 75 mm bore with or with out oval excess door complete all as specified and as directed

S&F PVC (SWR) bends 110 mm bore with or with out oval excess door complete all as specified and as directed

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors etc complete all as specified and as directed

S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed laid in trenches or in floors etc complete all as specified and as directed

M&L for RCC NP3 150 mm diameter Pipes laid on 150 mm thick PCC Cradle with PCC 1:4:8 bed with excavation in depth 0.70m – 1.65 m in any type of soil, including manholes/drop manhole of standard size made of Brick masonry/ RCC/Precast RCC with SFRC ventilating cover and frame complete all as specified and as directed

S & F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing,handles 2 Nos in each door ,hinges anodised aluminium snap beading, screws etc. complete all as specified (Note : Glass pane measured and paid for separately under respective item)

Supply and Fixing sheet Tinted glass 5.5mm thick ordinary quality and glazing with oil putty or rubber and aluminium beading in squares n. exc 0.5 sqm in each pane complete all as specified and directed.

S&F on hume pipe septic tank for 10 user's including excavation in any type of soil , PCC 1:4:8 below foundation , vent shaft , connection etc complete all as specified and directed.

M&L for Soakage well of size 1.20M dia x 1.50 M effective depth .including excavation in any type of soil ,foundation in PCC 1:3:6 ,walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonry in CM ,RCC cover slab in M25 /SFRC cover ,interconnecting pipes of RCC /DWC complete filled with brick bats complete all as specified and directed. Note: Soakage well shall be executed as per Drg no. CEJZ/TD/68/15 Sheet 1/4 to 4/4 dated 10-8-15

M&L for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footpath parks, lawns ,drive ways or light traffic parking etc ,of required strength , thickness & size /shape ,made by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of coarse sand , compacting and proper embedding /laying of inter locking paver block into the sand bedding layer through vibratory compaction by using plate vibrator ,filling the joints with fine sand and cutting of paver block as per required size and pattern ,finishing and sweeping extra sand complete all as specified and as directed

M&L for Sand cushioning to under ground cable with dry sand locally available 8cm thick before laying the cable and 15 cm above the cable, stretching and testing of cable complete all as specified & directed by Engineer-in-Charge. Note : Depth after punning shall be measured and paid.

Supply & laying sub class 'B' bricks for protection of cable and laid perpendicular to the trench all as specified & directed by Engineer-in-Charge.

Supply and laying of Steel tubing light grade galvanised of size 25mm dia laid in trench for protection of cable complete all as specified & directed.

Supply and laying of Steel tubing medium grade galvanised of size 25mm dia laid in trench or fixed to wall complete all as specified & directed.

M&L for cutting of road for laying of LT cable and making good to match with the existing using extra cement etc. complete all as specified and as directed.

M&L for cutting the existing GI pipe line and inserting Tee of any size and connecting the new pipe line of size 25mm dia including fittings etc. complete all as specified and directed by Engr-in- charge

supply and fixing Gun-metal gate valves 25mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

Supply, laying in trenches or passing through pipes and testing cable XLPE Insualted screened PVC bedded, galvanised steel strip armored, electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6 Sqmm 2 Core including taking down the existing cable of any size.

M&L for point wiring for one light/Fan point controlled by one switch one way in & including PVC conduit using FRLS PVC unsheathed multistrand copper conductor wire 1.5 sqmm single core for one light/fan point controlled by one switch including 3 mm thick plastic laminated sheet cover over MS/PVC (as per site requirement) sunken box for earth continuity insulated PVC unsheathed (green colour) 1.5 sqmm copper earth wire connected to common earth dolly using complete all as specified and directed by Engr-in-charge. Note : (a) wiring shall be done by using proper colour coding.

All as per srl item No. 84 here-in-before but for 6 Amp socket outlet on independent board complete all as specified.

All as per srl item No. 84 here-in-before but for 6 Amp socket outlet on same board complete all as specified.

All as per srl item No. 84 here-in-before but for 15 Amp independent socket outlet using 2.5 sqmm single core wire (for phase, nuetral and earth) complete all as specified.

S&F ceiling rose 3 terminal size 50x65mm surface type 230 volts complete all as specified.

S&F Switch piano, flush type 5 Amps One Way 230 volts complete all as specified.

S&F Socket outlet 3 pin 6 Amps flush type 230 volts complete all as specified.

S&F Socket outlet 2-in-1 3 pin 6 & 16 Amps flush type 230 volts complete all as specified.

S&F Switch one way 15 Amps flush type 230 volts complete all as specified.

S&F LED compact fitting/batten for single LED tube of 1x20W, 220V, AC decorative box type 4ft with integral LED driver (double side connection) including 20W, T8 tube rod complete all as directed by Engr-In-charge.

S&F Holder PVC body with back plate for batten fitting suitable for LED lamp complete all as specified and directed by Engineer-in-Charge.

S&F LED Adore Lamp 9W, B22 base 6500K CDL type complete all as directed by Engr-In-charge.

S&F Sheet metal enclosure double door for DB's SPN 4 way 240 V having 200 A rated bus bar complete all as specified and directed by Engr-in-charge.

S&F Sheet metal enclosure double door for DB's SPN 8 way 240 V having 200 A rated bus bar complete all as specified and directed by Engr-in-charge.

S&F MCB SPN 32A, 240 V -10 KA all as specified and as directed by Engineer-in-charge.

S&F MCB SP 6-32A, 240 V -10 KA all as specified and as directed by Engineer-in-charge.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 4 Star rated, 230Volts, single phase, 50 Hz AC, energy saving high density PUF insulation complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed.

Supply and fix of exhaust fan, 230 mm sweep, 1400 rpm, MS body heavy duty, AC single phase, 230 volts with, blades, and frame and louvers including connection with 0.5 sqmm multistranded copper conductor flexible wire from ceiling rose, necessary fixing arrangement i.e anchor nut, bolt, washer, grouting and making good to disturbed surface complete all as specified and as directed.

S&F 30W New generation energy saving and environmental friendly long life LED flood light made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 for flood light with GI pipe bracket or clamp with nut bolt of suitable size for fitting complete all as specified and directed by Engineer-in-charge.

M&L for earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6mm thick buried directly in ground [earth pit not less than 2.25 metre deep below normal ground level] with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth Lead 4 mm dia wire by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SSR Part I connected to DB as earth lead all as specified and testing on completion including provision of earth lead protected by 20 mm dia light grade GI pipe & watering pipe shall be 15 mm bore medium grade GI pipe including all excavation and earth work in any type of soil, PCC pit with RCC cover, char coal, salt, funnel etc complete. Note : Rate quoted by tenderers shall be deemed to include for following provisions:-[i]. Excavation & earth work in any type of soil including removing of surplus material upto 50 M.[ii]. PCC 1:3:6 type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC 1:2:4 type B1 cover 50x50 cm with 8mm TMT bars @ 10 cm C/C both ways with handles.[iii]. Main earthing lead from earth electrode to test point upto 7.5 mtr.[iv]. Funnel with watering pipe [GI pipe] 15 mm bore [ISI marked] medium grade & copper lugs, charcoal & salt as reqd.[v]. GI protection pipe of size 20 mm bore light grade 7.5m.

S&F fan regulator stepped type, electronic, flush type on the existing phenolic laminated sheet etc. complete all as specified and directed by Engineer-in-Charge.

S&F ceiling fans 1200mm sweep energy efficient five star rated 230 volts with brushless direct current motor (BLDC) with blades, down rods, electronic regulator control type and accessories with brushless direct current motor (BLDC) including down rods and connecting up with 3 runs of suitable size single core PVC insulated but unsheathed, FRLS cable with multistanded copper conductors from ceiling rose to fan complete all as specified and as directed.

M&L for sub main wiring complete with FRLS PVC insulated unsheathed stranded copper conductor wire 4.0 Sq mm 02 runs (for Phase & Neutal) along with earth wire FRLS PVC insulated unsheathed stranded copper conductor wire of size 4.0 sq mm wire drawn through in & including PVC casing caping or conduit as per site requirement complete all as directed by Engr-In-charge. Note: 2 runs of main conductor and one run of PVC casing caping concealed shall be measured as one unit length.

M/S HARI CONSTRUCTION (BID ID -3076264)

AMI CONSTRUCTIONS (BID ID -3075043)