(Sl NO. 3) Repair of Stand Post and installation of Submersible Water Pump for Water Supply, Sanitary and Plumbing works at different places and Sinking of Ordinary Hand Tube Well at different places at Jalpesh Mela Compound under Maynaguri P.S.

Repair of Stand Post and installation of Submersible Water Pump for Water Supply Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including ….etc. (a) Depth of excavation not exceeding 1,500 mm

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. (b) River bazree

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks ….etc. (f) 25 mm to 30 mm shuttering without staging in foundation

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor) (ii) With 1:4 cement mortar (b) 15 mm thick plaster

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc

Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring ….etc. (a) For depth upto 150 metre. (iii) 80 mm dia. boring etc.

Supply of G. I. pipes of TATA make including necessary sockets (h) 80 mm dia. (ii) Medium quality

Supplying high density polythene strainer of approved make with adapter conforming to I.S. specifications. (iii) 80 mm dia.

Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD ….etc. (A) PVC Pipes 80 mm

PVC Pipes 25 mm

Supplying, fitting and fixing chech valve (vertical) G.M. tested to 21 kg per sq. cm. (iii) 25 mm

Supplying of Submersible water pump 1.5 HP including all Electrical works and allied works (As per Quotaion)

Sanitary and Plumbing works Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (vii) 25 mm dia

Supplying, fitting and fixing push cock of heavy quality and of approved make and brand. (a) Cast iron (i) 15 mm

Supplying, fitting and fixing bib cock or stop cock. (f) (i) Polythene Bib Cock / Stop Cock (HD) with metal inlet (EMCO /ATLAS or equivalent) 15 mm

Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with ……etc. (a) For Exposed Work 15 mm PVC Pipes

Supplying, fitting and fixing PVC pipes for underground work of approved make of Schedule 80 (medium duty) conforming ……etc. PVC Pipes 25 mm

Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD ……etc. (B) Socket (Dia) 15 mm

(C) Elbow 15 mm

(D) Long Bend (90 Degree) 15 mm

(E) Tee 15 mm

(I) Union 15 mm

(L) Reducing Socket (mm X mm) 20 X 15

Supplying, fitting and fixing low-down cistern parts. (i) Internal fittings for cistern complete of approved make.

(ii) Outlet Assembly

Cleaning and removing mud upto 2000 litre Water Tank including masonry reservoir.

Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. (iii) 600 mm long

Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. (iii) 900 mm long

Supplying, fitting and fixing pillar cock of approved make. a) (i) CP Pillar Cock - 15 mm

Plumbing Mistry

Plumbing Helper

Methor Mazdoor

Sinking of Ordinary Hand Tube Well Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring ….etc. (a) For depth upto 150 metre. (i) 40 mm dia. boring etc.

Supply of G. I. pipes of TATA make including necessary sockets (e) 40 mm dia. (ii) Medium quality

Supplying high density polythene strainer of approved make with adapter conforming to I.S. specifications. (i) 40 mm dia.

Supplying, fitting and fixing popular Maya pump no-6 or similar. (i) For 40 mm dia. tube well

Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD ….etc. (A) PVC Pipes 40 mm

Supplying, fitting and fixing chech valve (vertical) G.M. tested to 21 kg per sq. cm. (v) 40 mm

Supplying, fitting and fixing steel cutter piece upto 450 mm long with sockets. (i) 40 mm dia.

Supplying, fitting and fixing brass cylinder parts. (i) Brass plunger complete

Pump operator, Night Guard & Electrical Service Charges

ADD GST @ Rs. 18 %

ADD CESS @ Rs. 1 %