PROVN OF 2X TOILET BLOCKS (10X URINAL POTS, O1X IWC AND 2X WHB EACH) NEAR DRILL SQUARE AT PRC RAMGARH CANTT

Amount

Excavation in trenches, n.exc. 1.5m wide and n.exc. 1.5 m in depth. For foundation and getting out in soft/loose soil.

Removing excavated material n.exc. 50m and depositing where directed at a level n.exc. 1.5 m above the starting point.

Returning filling in including spreading leveling watering and well ramming in layers n.exc.25 Cm.

M&L Cement concret(1:4:8) Type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete .

M&L Brick work with sub class `B` bricks straight or curved on plan exc 6 m mean radious built in cement mortar (1:6) complete as as specified and directed.

M&L Damp proof coarse to horizontal or vertical surfaces including necessary form work in PCC(1:2:4) type B-0 25mm thick.

M&L Moorum/ red bajri filling in floors or pavings, laid in floors n.exc 15cm thick, spread, levelled and rammed including watering.

M&L RCC (1:1.5:3) type A-1 using 20mm graded stone aggregate as in plinth beam lintel beam roof beam etc

M&L RCC (1:1.5:3) type A-1 using 20mm graded stone aggregate as in slabs supported on walls beams and columns etc

Use and waste Form work to sides and soffits of plinth beam lintel beam roof beam etc

Use and waist form work to soffits of suspended slabs such as roof slabs, floor slabs n.exc.200mm thick.

Use and waste Form work to edges of concrete flats,treads,breaks in floor etc exc10cm but n.exc 20cm.

M&L Mild steel TMT bars 10mm dia and over,cut to length, including cranking,bending etc and binding with mild steel wire(annealed) not less than 0.9mm dia

M&L Mild steel TMT bars 8mm dia cut to length, including cranking,bending etc and binding with mild steel wire(annealed) not less than 0.9mm dia

same as per iem No 14 here in above - but as in stirrups

M&L Rendering 15mm thick on fair faces of brick work or concrete surface in cm(1:6) finished fair and even complete as all specified and directed.

Rendering in cement mortar I:3 on fair face of cement concrete on ceiling 5mm th finished surface even and smooth with out using extra cement complete as all specified and directed.

Rendering in cement mortar 1:4 with WPC (WPC shall be measured and paid separately) on fair face of brick work 15mm th finished surface even and smooth with out using extra cement complete as all specified and directed.

M&L White washing three coat after preparation of newly plastered surface on wall complete as all specified and directed.

M&L White washing three coat after preparation of newly plastered surface on ceiling complete as all specified and directed.

Preparation of newly plastered surface and applying two coat of cement base paint over a coat of white wash complete as all specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube fix in opening as specified.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheetys for top rail, lock rail & bottom rail for stiles and plain colour PVC sheetys for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to gether with solvent cement, fix in frame as specified.

S&F butt hings 100mm long extruded aluminium alloy with galvanised mild steel hinge pin, anodised type C-22 rolled.

Supply and fixed Aluminium, anodised barrel tower bolts 200mm of extruded section complete as all specified and directed.

S&F aluminium handles cast type, anodised 150mm complete as all specified and directed.

M&L Mild steel Flat iron 25mm by 5mm as in hold fast complete as all specified and directed.

M&L for cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in bed block for hold fast, coping & filling in pressed steel door frame complete as all specified and directed.

M&L Steel ventilator with top hung shutter including hinges steel peg stay complete as all specified and directed.

M&L Steel window with side hung shutter including projecting type hinges with steel handle and steel peg stay, complete with glazing bars,dovetailed or welded complete as all specified and directed.

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete as all specified and directed by Engg-in-charge.

M&L for prepration of new steel surface not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide complete as all specified and directed by Engg-in-charge.

S&F 3mm thick Figured glass, pin headed type and glazing with oil putty in square n exc 0.5 sqm in each pane complete as all specified and directed by Engg-in-charge.

M/L PCC(1:4:8) type D-2 using 40mm graded stone aggregate as in sub base75mm thick complete as all specified and directed by Engg-in-charge.

M&L for non skid colour ceramic tiles 7mm thick area of each tile exc 0.06 Sqm but n.exc. 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including screed bed or bedding layer of cement mortar(1:6) 15 mm thick for laying floor finishes complete all as specified and directed..

M&L for glazed ceramic tile 300x200x6mm thick (coloured) on vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including rendering 10mm on fair face of brick work in cment mortar 1:4 to receive vitrefied tiles complete as all specified and directed by Engg-in-charge.

S&F in repair vitreous china wash hand basin ,white, flat back, size 550x400 mm including chain and plug and porcelain stopper, brackets including cutting for and pinning in ends of brackets or erecting stand complete as all specified and directed by Engg-in-charge.

S&F in repair vitreous china squatting pan , Orissa pattern size 580 x 440 mm white, with integral foot rest including connection to trap, and to flush pipe, anti-syphonage etc complete as all specified and directed by Engg-in-charge.

S&F 10 ltr capacity PVC valveless, syphonic action type flushing cistern low level, white, with inlet ball valve, float and handle inciuding bracket complete as all specified and directed by Engg-in-charge.

S&F pvc waste pipe sutable for WHB & SINK complete as all specified and directed by Engg-in-charge.

S&F PVC connection 15mm bore dia 450mm long with PTMT nut Make-Prayag complete as all specified and directed by Engg-in-charge.

Straight fair cutting n.exc 10cm width or girth on exposed surface of brick work incl rubbed finish and waste complete as all specified and directed by Engg-in-charge.

S&F tubes `medium grade' galvanised with all fittings and fixed complete to walls and ceiling or laid in floors 20mm bore complete as all specified and directed by Engg-in-charge.

S&F tubes `medium grade' galvanised with all fittings and fixed complete to walls and ceiling or laid in floors 15mm bore complete as all specified and directed by Engg-in-charge.

Gun-metal, globe or gate valves 20mm, with iron wheel head, screwed both ends for iron pipe and fixed complete as all specified and directed by Engg-in-charge.

S&F 15mm stop valve fancy type chromium plated concealed type , screwed downhigh presser, with crutch or butterfly handle, screwed both hands for ironpipe or for unions complete as all specified and directed by Engg-in-charge.

S&F bib tap15mm , chromium plated with crutch butterfly handle, screw down, screwed for iron pipe or for brass ferrule complete as all specified and directed by Engg-in-charge.

Ball brass valves 20mm, high pressure, with polythene float and fly nut complete, screwed for iron pipeor brass ferrule complete as all specified and directed by Engg-in-charge.

S&F pillar tap cast copper alloy fency type,with capastan heads, chromium plated screwed down high pressurewith or with out lettered "HOT" or "COLD" with long screwed shanks and fly nuts, screwed for iron pipe complete as all specified and directed by Engg-in-charge.

S&F 15mm dia angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) complete as all specified and directed by Engg-in-charge.

S&F Rotational moulded polychylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I ,1000 Ltrs complete as all specified and directed by Engg-in-charge.

M&L Cement concret(1:3:6) TypeC-2 using 40mm graded stone aggregate as in surface channel and drain complete as all specified and directed by Engg-in-charge.

M&L Providing cement concrete type B1 PCC 1:2:4(using 20 mm graded agg) as in benching concrete complete as all specified and directed by Engg-in-charge.

M&L Extra for forming fair finished drain or channel 30cm inner girth in cement concrete,using extra cement,including forms,mitred/stopped ends etc complete as all specified and directed by Engg-in-charge.

M&L Add or deduct for each 25 mm girth or part there of over or under 30 Cm ditto complete as all specified and directed by Engg-in-charge.

M&L PVC(SWR) pipes 110mm dia single socketed, in any length with rubber ring joints,laid in trenches or fixed to wall complete as all specified and directed by Engg-in-charge.

M&L150 mm dia doubled wall corrugated HDEP Pipes,5mm wall thickness,stiffness class SN -4 , laid and jointed complete with collers and elastomeric ceiling ring laid in trenches /wall as specified complete as all specified and directed by Engg-in-charge.

M&L Cement concrete bed to drain pipws including packing under,hounching against the side of pipes after they are laid and tested in PCC(1:3:6) type C-2 for 150mm dia pipe complete as all specified and directed by Engg-in-charge.

M&L PVC (SWR) bend any radius 110mm dia complete as all specified and directed by Engg-in-charge.

M&L PVC(SWR) Tee any radius 110mm dia complete as all specified and directed by Engg-in-charge.

S&F PVC(SWR) P trap of 110mm dia complete as all specified and directed by Engg-in-charge.

M&L PVC(SWR) pipes 75mm dia single socketed, in any length with rubber ring joints,laid in trenches or fixed to wall complete as all specified and directed by Engg-in-charge.

M&L PVC (SWR) bend any radius 75mm dia complete as all specified and directed by Engg-in-charge.

Supply only integral water proofing compound.

M&L 10mm thick screed bed in CM 1:3 with WPC @ 3% by weight of cement (WPC shall be measured and paid separetly) and applying 3mm thick APP Modified polymeric water proofing membrance having standard weight 3.2 to 3.50 Kg/Sqm shall be laid and bonded to the sb-strata by heat process, over lap shall sealed/fused by flame torch as per manufacturers instructions with 100mm side lap over bituminious based primer confirming to IS:3384-1965 @ 0.30 Ltrs/Sqm till the roof surface is impregnated. APP Modified polymeric membrance shall be covered with bituminious based aluminium paint @ 0.2Kg/Sqm in two coats over over non approachable roof slabs complete all as specified and directed by Engineer-in-charge

Excavating in trenches, n exc 1.5M wide and n exc 1.5M depth; for foundation etc. or for shafts, wells, cess pits, manholes, pier holes etc n exc 10 Sqm on plan and n exc 1.5M in depth and getting out in hard/dense soil complete all as specified and as directed by Engr-in-Charge

Removing excavated material exc 250 and n. exc. 500 m and depositing where directed at a level n.exc 1.5 m above the starting point.

Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, finished even and smooth w/o using extra cement using water proofing compound. NOTE :- WPC shall be measured and paid separately.

Supply only liquid water proofing compound.

M & L for providing pre cast reinforced cement conc. 1:2:4 type B-1 & set in cm 1:4 as in cover slabs for drain, manholes etc. incl necessary form work complete as all specified and directed by Engg-in-charge.

M&L cement concrete type B-2 (1:2:4) using 20 mm graded stone aggregate as in coping, moulded or chamferred edges and like complete.

M&L cement concrete type B-1 1:2:4(using 20mm graded stone agg) in surface channels and drain.

M & L for 150mm dia reinforced concrete pipes, class NP2 pipes laid in trenches and jointed as specified.

M&L concrete bed to drain pipe 150mm dia bore including packing under and complete surrounding pipe with cement concrete 1:3:6 type C-2, after they are laid and tested complete as all specified and directed by Engg-in-charge.

Septic tank excavation in ordinary soil foundation in PCC (1:2:4) brick work in CM (1:4) RCC cover slab covers including RCC precast man hole cover having 6mm plate embeded around / fibre reinforced cover with angle iron frame vent shaft and sludge chamber etc. complete for 50 users.

Soakage well excavation in ordinary soil foundation in PCC (1:3:6) walls of honey comb and solid in M-25 concrete including intercepting chamber screen chamber brick work in CM RCC cover slab in M-25/RR masonery / filling with brick bats complete of size 1.80m dia x 3.00m deep.

M&L drilling and tapping cast iron water mains (in position) for branch connection of the internal dia 20mm.

M&L straight plain brass ferrules (or connecting screws) sscrewed both ends 20mm dia including all connecting fittings to be tapped in GI/CI pipe.

Supplying & laying 25 mm bore GI tubing, medium grade with new fittings as required and laid in trenches including testing complete all directed.

Supplying & laying 50 mm bore GI tubing, medium grade with new fittings as required and laid in trenches including testing complete all directed.

Supply and fix 25mm bore stop valve, cast copper alloy, with crutch or butterfly handle for iron pipe or for union complete all as specified and directed.

Supply and fix 50mm bore stop valve, cast copper alloy, with crutch or butterfly handle for iron pipe or for union complete all as specified and directed.

M&L for construction of valve chamber of size 600x600x600 mm with block masonary (1:4:8) type D-2, 20mm thick PCC block masonary work built in 1:6, 10mm thick internal and external plaster in 1:4 cm provided with 3mm thick MS sheet cover and 40x40x3 mm MS angle ironframe fixed in copping PCC 1:2:4 type B-1 with locking arrangement and handle painting of MS work with one coat of red oxide and two coat of synthetic enamel black paint complete all as specifed and directed by Engg-in-charge.

M & L for point wiring for one light/ fan point controlled by one switch with 1100 volt grade PVC FRLS insulated unsheathed 1.5 Sq mm multi stranded copper conductor cable with continuous PVC FRLS insulated unsheathed earth wire of 1.5 Sq mm multi stranded copper conductor cable drawn in & including concealed rigid non metallic PVC conduit medium grade with fittings (ISI marked) not less than 20 mm dia & sunken anodized pressed sunken boxes made out of not less than 1 mm thick sheet, covered with 2.8mm thick laminated insulated cover make sheet for housing/fixing switches etc complete all as specified and directed.

Description all as per item No 180 above but 1.5 Sq mm for 5 Amp socket outlet on same board with 1.5 Sq mm earth wire complete all as specified and directed.

All as per Srl items No. 180 here-in-before but point wiring with 2.5 sqmm for 15 amp socket out let with 2.5 sqmm earth continuity conductor complete all as specified and as directed.

S & F switch piano, 1 way 5 Amp type single pole 230 volts complete all as specified and directed.

Supply & Fix ceiling rose surface type Bakelite 65x50 mm three terminals complete all as directed.

S&F socket outlet 3/5 pin , 5 pin, 5 amp flush type 230 volts complete all as specified and as directed.

S&F switch socket combination 2 in 1, 6 pin 5 Amp and 15 Amp flush type universal 230 volt complete all as specified and as directed.

S & F angle holder complete all as specified and as directed.

S & F LED lamp 9W complete all as specified and as directed.

S&F LED tube light fitting batten suitable for LED T-8 lamps cat part no DMLN1T8-16 pre-wired with LED tube rod 16w cat part no LTT8-16 with extruded aluminium body PC diffuser and inbuilt drive of crompton greaves or equivalent model of philips/wipro/GE including electric conection from ceiling rose to light fitting by PVC flexible wire 23/.0076 mm size including earth connection.

S&F metalic exhaust fan alongwith louvers single phase 230V, of 300mm sweep with necessary fixing clamps, hook and nut, bolt and washers on wall complete all as specified and directed. Make : Gromption Greaves/ Havells or Equivalent

Cutting opening in existing brick walls (any desription) including trimming surfaces for exhaust fans or at any other indicated situation and making good the disturbed surfaces with cement morter plastering including fair finishing complete all as directed by Engr-in-charge.

M & L for sub main wiring two single core 4.0 Sqmm PVC insulated FRLS multistanderd copper conductor cable and one run of 4.0 Sqmm PVC insulated unsheathed FRLS multistanderd copper conductor cable for earth wire drawn in & including concealed rigid non metallic PVC conduit medium grade with fittings (ISI marked) not less than 20 mm dia including taking down of existing conduit or batten complete and making good disturbed surface wall complete all as specified and as directed. Note : - 2 runs of 4 Sqmm cable, 1 run of earth wire and PVC conduit shall be measured as one unit length.

S&F in repair sheet metal enclosures for DBs single pole & neutral 4 way double door with 200 Amp rated bus bar suitable to accommodate MCB and necessary electric cable connection through suitable lugs by crimping and making good disturbed area of wall complete all as specified & as directed.

S&F in repair MCB single pole 6 to 32 Amp 240 V, 'B' Series, 10 KA, complete all as specified and dircted.

S&F in repair MCB SPN , 20 to 40A 240V, 'B' Series, 10 KA, complete all as specified and dircted.

Earthing complete with Galvanised steel earth plate electrode 600 x 600 x 6 mm thick buried directly in the ground ( eath pit not less than 2.25 mtr deep below normal ground level) with the top edge of earth plate, depth not less than 1.5 Mtr below the ground level, connected to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts and washers protected by GI tubing light grade 15 mm dia upto test point 20 mm dia watering pipe with funel & wire mesh, PCC of chamber and coping shall in 1:3:6 type C-1 using 20 mm stone aggregates complete all as specified and shown in electrical plate No.3 of SSR Part-I, 2009 with CI cover 10mm thick of size 300x300mm including earth work in any type of soil ,removal of surplus soil and providing charcol dust & salt layers all around the earth plate complete and earth lead connected to panel including testing complete all as specified and directed. Note : Earth test result should not less than one ohm.

Supply and fixed PVC insulated, armoured, heavy duty electric cable with heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-section area 10 Sqm 2 cre along with nut bolts and sadle complete all as specified and as directed.

M/S ROHIT CONSTUCTION