PETTY ELECTRICAL REPAIR INCLUDING ATTENDING DAY TO DAY COMPLAINTS FOR INTERNAL ELECTRIFICATION IN SOUTHERN, NORTHERN AND CENTRAL SECTOR UNDER AGE E/M AT MILITARY STATION KOTA

Amount

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, (excluding fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc) removing materials to store for reuse or for taking credit and making good disturbed surfaces of walls, ceiling, etc complete all as specified and directed.

M&L for Point wiring with PVC insulated (FRLS) unsheathed multi stranded copper conductor cable of size 1.5 Sqmm with PVC insulated (FRLS) unsheathed multi stranded copper conductor cable of size 1.5 Sqmm as earth continuity wire to be drawn in and including PVC casing capping not less than 20 mm width with all accessories and fittings, fixed on surface including providing wooden rectangular block for mounting switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet cover and making good disturbed surfaces, complete all as specified and directed for the following: - One light/ceiling fan/exhaust fan/bell buzzer point controlled by one, one way switch of 5/6 Amps.

All as per item No 2.00 (here-in-before) but one 5 Pin, 5/6 amps socket outlet point on same board, controlled by one, one way 5/6 Amp switch.

All as per item No 2.00 (here-in-before) but one 5 Pin, 5/6 amps socket outlet point on independent board, controlled by one, one way 5/6 Amp switch.

All as per item No 2.00 (here-in-before) but one light point controlled by two, two way switches of 5/6 Amps.

M&L Point wiring with PVC insulated (FRLS) unsheathed multi stranded copper conductor cable of size 2.5 Sqmm, with PVC insulated (FRLS) unsheathed multi stranded copper conductor cable FRLS of size 2.5 Sqmm as earth continuity wire to be drawn in and including PVC casing capping not less than 20 mm width with all accessories and fittings, fixed on surface for one socket outlet 15 amp on independent board including providing wooden rectangular block for mounting switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet cover and making good disturbed surface, complete all as specified and directed.

Fixing only in renewal LED light fittings (batten type) of 18/20/22 Watt, fixed on wall/floor/roof with and including all accessories and connecting to ceiling rose, complete all as specified and directed. Note :- (i) LED light fittings as specified under item shall be issued under Schedule 'B' free for fixing only. (ii) Cost of tools and plants necessary for fixing of light fittings shall be arranged by contractor and cost of suitable copper conductor wire from ceiling rose to light fitting shall be deemed included in the quoted unit rate.

S&F switch piano flush type 5/6 Amps, 230 volts, single pole, one way, ISI marked, complete all as specified & directed.

S&F switch piano flush type 5/6 Amps, 230 volts, single pole, Two way, ISI marked, complete all as specified & directed.

S&F in renewal switch piano flush type 15/16 Amps, 230 volts, single pole, one way, ISI marked, complete all as specified and directed.

S&F in renewal socket outlet, 5/6 and 15/16 Amps, 230 volts, multi pin, flush type, universal, complete all as specified and directed.

S&F in renewal socket outlet, 5/6 Amps, 230 volts, multi pin, flush type, universal, ISI marked, complete all as specified and directed.

S&F in renewal switch socket combination, 5/6 Amps, 230 volt, multi pin, flush type, universal, ISI marked, complete all as specified and directed.

Supply and fixing switch socket combination, 5/6 and 15/16 Amps, 230 volt, multi pin, flush type universal, ISI marked, complete all as specified and directed.

S&F in renewal modular type switch 5/6 Amps, 230 volts, single pole, one way, ISI marked, complete all as specified and directed.

S&F in renewal modular type switch 15/16 Amps, 230 volts, single pole, one way, ISI marked, complete all as specified and directed.

S&F in renewal modular type socket outlet, 15/16 Amps, 230 volts, multi pin, universal, ISI marked, complete all as specified and directed.

S&F in renewal modular type socket outlet, 5/6 Amps, 230 volts, multi pin, universal, ISI marked, complete all as specified and directed.

S&F PVC/polycarbonate lamp holder, angular/batten type with back plate, ISI marked complete all as specified & directed.

S&F in renewal stepped type electronic fan regulator, flush type, 230 volts AC, single pole, humming free, fixed on the existing phenolic laminated sheet, complete all as specified and directed.

S&F ceiling rose surface type PVC/Polycarbonate isolated body, 65x 50mm, 3 terminals, complete all as specified & directed.

S&F in replacement PLS Lamp two pin 9W, complete all as specified and directed.

S&F in replacement PLS Lamp two pin 11W, complete all as specified and directed.

S&F in renewal recess mounting LED luminaire, 36 Watt capacity and minimum 100 lumens per watt, size 2'x2', complete all as specified and directed.

S&F in renewal buzzer, Ding Dong, AC 230 volts, single pole, complete all as specified and directed.

S&F in renewal bell push piano, flush type 5/6 Amps, 230 volts AC,single pole, complete all as specified and directed.

S&F in renewal LED bulb, 9 Watt, suitable for threaded lamp holder, ISI marked, complete all as specified and directed.

S&F in renewal MCB SP 240 Volts, 'B' curve, breaking capacity 10 KA of rating 6-32 Amps, complete all as specified and directed.

S&F in renewal MCB SPN 240 Volts, 'B' curve, breaking capacity 10 KA of rating 6-32 Amps, complete all as specified and directed.

S&F in renewal MCB TPN 440 Volts, 'C' curve, breaking capacity 10 KA of rating 63 Amps, complete all as specified and directed.

M&L for Submain wiring power/circuit using FRLS PVC insulated (FRLS) unsheathed, stranded copper conductor cable, 2 Single core of size 10 Sqmm & earth continuity conductor of size 10 Sqmm, to be drawn through and including PVC casing and caping 25mm width on surface of walls/roof/floors and including old unserviceable existing submain wiring and casing caping complete all as specified and directed.

M&L for Submain wiring power/circuit using FRLS PVC insulated (FRLS) unsheathed, stranded copper conductor cable, 2 Single core of size 6 Sqmm & earth continuity conductor of size 6 Sqmm, to be drawn through and including PVC casing and caping 20mm width on surface of walls/roof/floors and including old unserviceable existing submain wiring and casing caping complete all as specified and directed.

M&L for Submain wiring power/circuit using FRLS PVC insulated (FRLS) unsheathed, stranded copper conductor cable, 2 Single core of size 4 Sqmm & earth continuity conductor of size 4 Sqmm, to be drawn through and including PVC casing and caping 20mm width on surface of walls/roof/floors and including old unserviceable existing submain wiring and casing caping complete all as specified and directed. Note for items of submain wiring: - Two run of sub main wire, one run of earth wire and one run of PVC casing capping shall be measured as one unit.

S&F in renewal factory made sheet metal enclosure for distribution boards, double door, suitable for fixing MCB's, SPN 08 ways, 240 Volts, protection class IP-43, made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface, conforming to IS 13032, IS 8623, BS-5484 with tinned copper bus bar of 200 Amps capacity, complete all as specified and directed.

S&F in renewal factory made sheet metal enclosure for distribution boards, double door, suitable for fixing MCB's, SPN 04 ways, 240 Volts, protection class IP-43, made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface, conforming to IS 13032, IS 8623, BS-5484 with tinned copper bus bar of 200 Amps capacity, complete all as specified and directed.

S&F in renewal factory made sheet metal enclosure for distribution boards, double door, suitable for fixing MCB's, TPN 04 ways, 415 Volts, protection class IP-43, made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface, conforming to IS 13032, IS 8623, BS-5484 with tinned copper bus bar of 200 Amps capacity, complete all as specified and directed. Notes for items of MCB DB - (1) The unit rate includes for cutting/chasing the stone/brick walls to accommodate enclosure flush to wall. (2) The unit rate includes for making good the disturbed surfaces including finishes to match with the adjoining surface.

S&F in renewal single pole and neutral enclosure with two pin and earth plug and socket including 1Nos MCB 20Amps capacity, complete all as specified and directed.

S&F in renewal PVC rectangular block for mounting switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet cover of size 100x100 mm and 50 mm deep, complete all as specified and directed.

All as per item 38.00 above but of size 175x100 mm and 50 mm deep, complete all as specified and directed.

All as per item 38.00 above but of size 200x150 mm and 50 mm deep, complete all as specified and directed.

All as per item 38.00 above but of size 250x200 mm and 50 mm deep, complete all as specified and directed.

S&F in renewal wooden rectangular block for mounting switches, sockets, fan regulators etc with hylam sheets cover of size 250x200mm and 50 mm deep, complete all as specified and directed.

S&F in renewal wooden rectangular block for mounting switches, sockets, fan regulators etc with hylam sheets cover of size 200x150mm and 50 mm deep, complete all as specified and directed.

S&F in renewal wooden rectangular block for mounting switches, sockets, fan regulators etc with hylam sheets cover of size 150x100mm and 50 mm deep, complete all as specified and directed.

S&F in renewal modular PVC gang box for mounting of modular switch socket etc of 8 module complete all as specified and directed.

S&F in renewal modular PVC gang box for mounting of modular switch socket etc of 6 module complete all as specified and directed.

S&F in renewal modular PVC gang box for mounting of modular switch socket etc of 4 module complete all as specified and directed.

S&F in renewal modular PVC gang box for mounting of modular switch socket etc of 3 module complete all as specified and directed.

M&L for Earthing with galvanized steel earth plate electrode of size 600 mm x 600mm x 6.0 mm, buried directly in ground (earth plate not less than 2.25 Mtr below normal ground level) connected to galvanized earth lead wire of 4 mm dia by means of bolts, buts, check nuts and washers of galvanized iron on steel including 15 mm dia light grade GI tubing for protection of earth lead, MS sheet metal funnel with wire mesh, watering pipe medium grade 20 mm dia, charcoal or coke and common salt in alternative layer of 15 Cm compacted thickness all around the electrode with concrete earth pit of PCC 1:3:6 type 75 mm thick precast RCC (1:2:4) type B1 pit cover reinfored with 8 mm dia deformed bar and suitable handle made of 10 mm dia round bar including GI wire of 4 mm dia for extension of earth lead and necessary excavation, earth work, in soft/loose soil and disposal of spolis to a distance not exc 50 Mtr and necessary connection and testing complete all as shown in electrical plate No. 3 and complete all as specified and directed. (Earth lead wire and GI protection pipe beyond 7.50 m shall be measured and paid separately)

M/s Prem Associates