LAC-ADS Electrical Work - Project for providing a Gas Crematorium and Generator in Public Graveyard in Pattamby Municipality

Amount

Electrical Work

OD295487/2025-2026:Supply, Conveyance, installation and commissioning of Human Body cremation furnace Powered by liquified petroleum gas, designed to comply with strict environmental standards with control panel enabling the operators to efficiently manage and monitor the cremation cycle. Durable Construction Look for furnaces built with high-quality materials, such as refractory brick and steel, to ensure long-term reliability and minimal maintenance and quencher chambers to minimize emissions and environmental impact. Ensure the furnace has precise temperature control systems, to maintain optimal operating conditions. Safety Features: Look for furnaces with safety features like flame safeguard relays, low air pressure safety switches and earthing systems to prevent accidents and ensure safe operation. Verify that the furnace is commissioned correctly to ensure optimal performance and safety. The primary chamber features a fully insulated internal refractory lining constructed from high-grade refractory brick ensuring a self-supporting, interlocked arrangement with a hot hearth design. It is equipped with one hot hearth combustion burner, which operates with temperature-controlled on/off functionality and is complete with internal air fans for optimal combustion. A waste ignition burner is also included, featuring temperature-controlled on/off operation and internal air fans to facilitate effective waste management. A precise temperature control sensor is integrated to monitor and maintain optimal operating conditions. Quencher Chamber: The quencher chamber is built with fully insulated internal refractory lining, using high-grade low thermal mass insulation to enhance efficiency. It includes one secondary chamber burnout burner that is temperature-controlled with on/off capabilities and features internal air fans to promote complete combustion, including providing provision for Ash removal at the rear side of the chamber. The 76mm refractory-lined stack significantly reduces heat penetration under all conditions, effectively preventing the possibility of fire and ensuring safe operation Technical Specifications- Door- Front Opening-Hinged door and trolley with rollers on ball bearing for easy sliding of the body for cremation inside the chamber. Fully Automatic burner system with Gas pipeline made of copper with pressure gauge. Material Loading Capacity: 200 kg (expandable to 500 kg) - Max Operating Temperature: 1000-1500°C - Power: 15 kW - Power Source: LPG Gas - Size: 9ftx6ftx5ft - Type of Incinerator: Human Body Cremation - Waste Type: Dead Human Body - Burning Ability: 200 kg/time - Average Burn Out Time: 1 hour - Furnace Chamber Temperature: 850°C - Air Blower: 5 HP - Burning Efficiency: 99% - Chamber: Double chamber system - Chimney Height: 100 ft Features- Durable Construction: Built with high-quality materials, such as refractory brick and steel, for long-term reliability and minimal maintenance - Precise Temperature Control: Temperature control sensor to maintain optimal operating conditions - Safety Features: Flame safeguard relays, low air pressure safety switches, and earthing systems to prevent accidents and ensure safe operation - Quencher Chamber: Fully insulated internal refractory lining, secondary chamber burnout burner, and 76mm refractory-lined stack to minimize emissions and environmental impact - Control Panel: PLC control panel with 440V, 50Hz power supply, fabricated in cubicle pattern with. suitable gauge MS Sheets with indicating lamps etc as per standards. Benefits- Efficient Cremation: Designed for efficient cremation with minimal environmental impact - Long-term Reliability: Built with high-quality materials for long-term reliability and minimal maintenance - Safe Operation: Safety features and quencher chamber design ensure safe operation and minimize emissions.

OD297072/2025-2026:Supply, conveyance, installation, testing and commissioning of 15 KVA 3 Phase 440V D.G. set with integral acoustic enclosure confirming to C.P.C.B. Norms, AMF panel, selfstarting and as per technical details given below Engine Make of Engine - Mahindra / Kirloskar / Cummins Type of Engine - Diesel Engine No. of cylinders - Suitable to develop the required BHP as per manufacturer's standards Method of cooling Water cooling with radiator Aspiration - Natural Design - Suitable for Generator set application Output - 17.5 BHP at 1500 rpm. Under N.T.P. Condition or equivalent standard of manufacturer Standard Accessories with Diesel Engine Flywheel to suit Coupling Close coupling Air-cleaner Radiator with fan provided with fan guard Fuel pump Mechanical governor Fuel filter Lubricating oil filter Residential type Exhaust silencer Battery Charger / Generator Engine Instrumental Panel Starting switch key or button Lubricating oil pressure gauge Water temperature gauge RPM indicator with Hour meter Battery charging Ammeter Safety control for Engine Battery Control (trip) for low lubricating oil pressure Battery Control (trip) for high water temperature Providing necessary warning systems and other safeties as Contemplated in relevant ISS Brushless Alternator Make - Kirloskar/Stamford/Mcauley/Crompton or Equivalent Type - Self Excited and self regulated Capacity - 15 KVA / 11.5 KW at 0.8 pf System voltage - 3phase 415V, 50Hz, 4 wire system Speed - 1500r.p.m. Voltage regulation - ± 2% of rated voltage Insulation class - F/H The Alternator should confirm to IS 4722. Fuel tank Suitable size built in type fuel tank integrated with acoustic enclosure. Fuel connection shall be done as per standards. Battery Suitable capacity fully charged battery with leads and terminals of appropriate AH capacity as per manufacture's requirement with automatic battery charger Operation manual, service manual, list of spares etc. shall be submitted while the DG set is supplied Standard control panel integral with the acoustic enclosure comprising of the following 20A 10kA 4 pole MCB-1 No. Digital multifunction meter with accuracy class 0.5 to read parameters such as KW, KVA, PF, Voltage, Current, Frequency etc. - 1 No. Digital type single function KWH meter with accuracy class 0.5 - 1 No. Necessary measuring CTs of appropriate ratio and burden for the required meters. LED type phase indication lamp for indicating the presence of supply on all phases.- 3 No. Fuse protections shall be provided for the meters and indication lamps. Metalic Danger Notice board - 1 No. Exhaust Piping Exhaust Piping shall be vent to the top of the nearest/tallest building. If the pipe cannot be clamped/ fixed to the building or any other structure of permanent nature necessary fabricated structures using channel section or angle iron sections of adequate mechanical strength duly painted with 2 coats of synthetic enamel paint over a coat of zinchromate primer shall be provided for the support of the exhaust pipe Supply and providing following sizes of 'B' Class GI pipe with flanged coupling in each full length of pipe, as additional exhaust piping, fixing the same firmly to the building / structure using necessary supports, such angle iron, MS clamp etc., painting the pipe and accessories with synthetic enamel paint over a coat of zinc chromate primer etc. as required. 75 mm diameter or nearest size 'C' Class MS pipe

1.10.1:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group A

1.21.1:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

1.21.2:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm

1.24.1:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch

1.24.3:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch

1.24.5:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet

1.26:Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

1.27.2:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm)

1.28.2:Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.3 Module

1.34:Supplying and fixing brass batten/ angle holder including connection etc. as required.

1.43:Providing and fixing extra conduit down rod of 20 mm dia, 2X10 cm length wiring with 2 X1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable including painting etc. as required. (Note: More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)

1.48:Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)

OD297859/2025-2026:Supply, conveyance, erection, testing and commissioning of 1 HP, high speed ,Horizondl type open well submersible motor pump set having an average discharge of 4ltrs/Sec-against a head of 25Mtrs ,suitable for 240V, 50 Hz, single phase AC supply,( Kirlosker-KOSI-135+/CRI PLANO 106/Crompton OWE 12(1HP)Z-28 V Guard VOSK F-90 ) complete as per the standard specifications and erecting on the existing cement concrete foundation, as required .

OD297861/2025-2026:Supply, fabrication, conveyance and fixing 25mm size of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required (for the installation of outdoor light fittings).

OD297862/2025-2026:Supply and fixing 440x325x135mm Syntax/Hensel/JILCO make Out door type IP55, weatherproof junction box mounting on the mast using necessary GI clamps to fixing double pole MCB isolator, timer, and KSEB Energymetet etc. Color White

2.1.2:Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.63 Amp TP & N

2.10.1:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, ""C"" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

2.15.2:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli Amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps

2.4.2:Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)6 Way (4+18), Double door

90.3.18.2:Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.32 mm dia with HG company fabricated clamps

90.3.22.3:Supply & installation of light fittings on flat iron bracket Supply, conveyance, installation, testing and commissioning the light fittings of following types made of CRCA sheet of .5mm thickness complete with all accessories and lamps etc. directly on wall using 2 nos. flat iron brackets made from 25x6mm flat iron, painting the flat iron bracket and giving connections with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving connection etc. as required.1200 mm 1X20W LED Lamp with box type fixture

90.3.24.4:Supply & installation of light fittings suspended on ball & socket arrangement with 19 mm down rod Supply, conveyance, installation, testing and commissioning the light fittings of following types made of .5mm thick CRCA sheet accessories and lamps etc. including supplying and fixing ball and socket arrangements on PVC round block, suspension down rod of 19mm dia MS conduit up to 2x30cm length including painting and wiring the down rod with 16/0.20mm 3 core round copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving connections etc. a required.1200 mm 2X20W LED Lamp with box type fixture

90.4.1:Supply and installation of suitable size MS rod type fan clamp in the RCC slab as per IS 732 as required.

90.4.2:Supply and installation of suitable size MS belt type fan clamp fabricated from flat iron 40 x 6 mm, 150mm long x 2 Nos with M.S. rod bent to shape, neatly painted with 2 coats of enamel paint over a coat of red oxide primer as per IS 732 as required.

90.4.5.4:Supply, Installation, testing and commissioning of ceiling fan of following sizes including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. 1200mm sweep - ceiling fan complete with service value minimum 4.0(cub meter/minute/Watt), Air delivery minimum 210(cubic meter/minute), Copper winding suitable for 230V/240V single phase AC supply

90.4.8:Charges for cutting holes suitable for accommodating exhaust fans up to 305mm sweep including plastering colour washing etc. as required.

90.6.6.2:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.2.50 sq mm

90.11.1.14:Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as outgoing (IP 42/43)

90.12.1.40:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).4 core 10 sq mm

90.12.7.40:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 10 sq mm with factory made clamp

90.12.9.5:Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench90/75 mm or nearest size

90.14.28.11:S & F Motor starters of the following ratingsSubmersible pump controllers with ammeter,DPMCB for single phase 1 HP submersible motor pumps (DOL)

OD297857/2025-2026:Providing and fixing High Density Polyethelene Composite Pressure Pipes conforming to IS 4984:2016, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with trenching, refilling and testing of joints complete as per direction of the engineer in charge. External work

90.16.1.1:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.00 mm copper conductor ( 14 SWG)

90.16.1.2:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG)

90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)

90.16.2.2:Supply and laying of the following sizes of B class GI pipe laid 0.6 m below ground level including excavating trench of suitable size and refilling etc, as required.20 mm dia. G.I pipe ( medium class)

90.16.3.3:Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required ( for horizontal run)25 x 6 mm GI strip

90.16.5.1:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.00 mm (14 SWG)

90.16.5.2:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 SWG)

90.12.24.1:Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.2.5 sq mm

OD298174/2025-2026:Supply and fixing cast aluminium stove enameled bulk head fitting with deep drawn anodised aluminium body, epoxy powder coated, heat resistant prismatic glass cover suitable for 9 W LED to wall / ceiling including giving connections with required length of 16/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming to relevant ISS or extending the original wiring and making good the surface as required.

OD298175/2025-2026:Supply and providing earth lead from the test joint to the earth electrode 2x25 x 3 mm GI strip tinned at the points of contacts of conductors/ strips including cutting, drilling necessary holes (in case of strip) and fixing firmly with plate test joint etc as required.

OD298176/2025-2026:Providing and fixing testing joint made of 2 no. strips as mentioned below of 2 x 25 x 3 mm GI strip sizs provided on either side of the conductors with 4 nos of GI bolts, nuts check nuts and spring washers etc. complete as required (for down conductors).

OD297860/2025-2026:Supplying and fixing Iron hook for supporting/holding Bearer wire of the K S E B Service cable made of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams/wall, including painting the exposed portion of loop.

OD297863/2025-2026: Supply and providing plate earthing as per IS 3043 with 600x600x6.30 mm GI/CI earth plate, 20 mm GI watering pipe fixed to the earth plate with 20 x 3 mm GI clamps, GI funnel with weld mesh, filling required quantity of charcoal including construction of inspection chamber with a bed concrete of 1:4:8 PCC using 40 mm broken stone (10 cm thick), brick work in cement mortar 1:6, plastering the surface of brick masonry and the exposed surface of PCC bed with cement mortar 1:4, 12 mm thick, (the finished inside dimension shall be 300 x 300 x 300 mm) but excluding test joint, earth continuity conductor to the plate, and covering at the top. (in ordinary rock - soft laterite soil) 600x600x6.30 mm GI/CI earth plat

2.5.1:Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required .(Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)4 WAY(4+12), DOUBLE DOOR

HEATMECH (BID ID -2385417)

Bidder Name

Heatech Systems

HEATMECH