SHIFTING HT/LT LINES FOR VILLIAPPALLY -CHELAKKAD ROAD WIDENING -KIIFB FUND PART-2 AKLOTH NADA TO VILLIAPPALLY

Doing straight joint on cables of sizes beyond 3x185 sqmm and upto and incl. 3x300 sq mm using the cable jointing kit supplied departmentally as per specification.

Additional rate for excavation of one Pit for LT Pole/LT Stay in Soft Rock.

Dismantling one damaged 11kV A type pole after disconnecting stays, strut etc. and stacking the same.

Fitting one No. Section fuse on LT line with dropping cables, crimping sockets, connecting with bolt&nut etc

Stringing one km LT 3ph 5 wire line (Rabbit for Ph and Weasel for N&St.main) incl. fitting cross arm etc removing touchings and conveyance of materials

Fitting one Additional 2.4m/3m Channel cross arm (100x50x6mm), in existing 11kV DP incl. conveyance of materials.

Loading HT A type pole from the stacking place and unloading the same at work site (transport by vehicle)

Mounting the cable ends of all sizes upto and incl. 3x300 sq mm with special type cable clamps incl. cost of extra materials if needed and giving necessary connections.

Doing one cable end termination on cables of sizes beyond 3x185 sqmm and upto and incl. 3x300 sq mm using the cable jointing kit supplied departmentally.

Fitting one set AB switch and giving connection

Drilling hole of various sizes on existing Channel/Cross Arm

Providing one Earth using earth pipe incl. digging & backfilling pit and supply of charcoal, salt, sand etc.

Excavation of cable trench in all classes of soil and backfilling after laying of cable (excluding laying of cable).

Laying HT XLPE UG cable (of sizes beyond 3x185 sqmm and upto and incl. 3x300 sqmm) as per specification excl. excavation and backfilling.

Additional rate for excavation of cable trench in exceptionally hard conditions ( like in *ordinary rock)

Fitting one Additional 75x40mm, 1.8m Channel cross arm in existing single pole incl. conveyance of materials.

Fitting one additional Fuse unit and giving connection from Transformer to fuse and DB to LT OH line.

Additional rate for providing one disc set on any type of HT pole for making cut point.

Fitting and erecting one HT DP using A type pole in position incl. fitting 2 channel cross arms, digging& back filling pit, drawing earth leads

Fitting 5 channel cross arms,AB switch, DO fuse, LA, HT & LT connections on existing DP, 3 LT fuses.

Fitting one Additional V cross arm in existing single pole incl. conveyance of materials

Fitting and providing one HT Stay for 11kV pole incl. digging & back filling pit.

Providing Transformer fencing , using 50x50x6mm Angle iron, 40 x 6 mm MS flat and 8 mm MS rod as specified, incl cost of transportation & foundation

Providing yard metalling with 6mm & 40mm thick blue metal as specified after constructing a curb wall.

Installing one DTR Meter with box on existing poles and giving the complete onnections incl. conveyance of materials.

Constructing Transformer plinth inclusive of cost of all materials (as per specification)

Erecting one 315kVA Transformer to existing Plinth/Platform and giving connections, incl. loading & unloading, excluding transportation

Transporting Transformers by hired vehicle upto 5km and upto 2 No. of 63 to 250kVA Transformers / RMUs excluding loading & unloading.

Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 poles excluding loading & unloading.

Additional rate for excavation of one Pit for LT Pole/LT Stay in Laterite.

Additional rate for excavation of one Pit for LT Pole/LT Stay in Hard Laterite

Additional rate for excavation of one Pit for LT Pole/LT Stay in Rock.

Fitting and providing one Strut using HT PSC pole incl. digging & back filling pit.

Loading HT PSC pole from the stacking place and unloading the same at work site (transport by vehicle).

Fitting and providing one HT Fly stay for 11kV pole using HT PSC pole incl. digging & back filling pits

Stringing of one km 11kV line with ACSR Raccoon (3 conductors) incl. cutting and removing tree branches wherever necessary.

Fitting and erecting one HT PSC Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads.

Fitting and erecting one HT A type Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads

Additional rate for refitting/redoing one Shackle set and reshackling one span while renewing any type of pole.

Erecting one 100kVA Transformer to existing DP and giving connections, incl. loading & unloading, excluding transportation

Erecting one 160kVA Transformer to existing DP and giving connections, incl. loading & unloading, excluding transportation.

Providing/Inserting 3 line spacer on the existing LT OH line.

Providing/Inserting 2 line spacer on the existing LT OH line.

Dismantling one Transformer upto 160kVA from structure and loading to vehicle incl. disconnecting HT/LT/Earth connections.

Wiring and installing one new LED street light fitting on existing pole and giving connections

Dismantling one Transformer above 160kVA from plinth and loading to vehicle incl. disconnecting HT/LT/Earth connections.

Loading LT PSC pole from the stacking place and unloading the same at work site (transport by vehicle).

Dismantling and reconnecting 3ph service connection from the OH line incl. lowering down the WP portion.

Dismantling one section fuse

Dismantling (without damage) one km LT 3ph 4 wire OH line, cross arms, insulators and stacking theconductors in rolls.

Dismantling (without damage) one km LT additional conductor line, cross arms, insulators and stacking the conductors in rolls

Dismantling (without damage) one ordinary street light/CFL/LED fitting from the pole and stacking.

Dismantling one Channel cross arm from existing DP structure, and bringing back to section store.

Dismantling transformer station in DP structure excluding the rate of dismantling earthing

Dismanling transformer station with transformer erected in plinth excluding the rate of dismantling transformer

Dismantling (without damage) one km 11kV line (3 conductors), cross arm, insulators, disc, rolling the conductor and stacking

Dismantling (without damage) one AB switch from existing structure and bringing back to section store

Dismantling one damaged 11kV PSC/RCC pole after disconnecting stays, strut etc. and stacking the same

Dismantling (without damage) one 11kV PSC/RCC pole after disconnecting stays, strut etc. and stacking the same

Dismantling (without damage) one HT stay incl. back filling, and bringingback to section store

Dismantling (without damage) one LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Dismantling and reconnecting Sph serviceconnection from the OH line incl. lowering down the WP portion

Please Enable Macros to View BoQ information