Providing new energy meter panel boards to shopping complex belongs to SVVS Devasthanam, Kanipakam

Supply Installation Testing and commissioning of free standing floor mounted dust and vermin proof compartmentalised cubical panel made out of CRCA sheet, required hardware, duly painted by two coats of zinc/red oxide primer followed by Powder coated / epoxy / PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/Neoprene rubber gasket of not less than 3mm thickness,separate detachable, gland plate M.S. base channel, hinged door with locking arrangement for equipment/switchgear. Thickness of sheet shall not be less than 1.6mm up to 600mm length/width of any compartment and be of 2.0mm above 600mm. Load bearing structure shall be of 2.0mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure

Supply and fixing of electrolytic grade aluminium bus bar of 25mm x 6mm thickness (0.402kgs/mtr) by means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves

Supply and Fixing of (0-500) V range Volt meter on existing panel ,\ making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required.Makes : L&T

Supply and Fixing of CT operated direct reading type digital type Ammeter of rating below 500A on existing panel , making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. Makes : L&T

Supply and Fixing of Current Transformer from 200 / 5 to 400/5 Ratio , 10 VA , class 1 accuracy, with all necessary support in existing panel including connection etc. as required Makes : L&T

Supply and Fixing of 240/220 V, LED (22.5 mm dia ) Pilot lamps of red and yellow colour with integral circuit, terminal block, including connection etc. as req

Supply and Fixing of 240/220 V, LED (22.5 mm dia ) Pilot lamp of blue colour with integral circuit, terminal block, including connection etc. as req

Supply and Fixing of selector switch for voltmeter (4 position) including making connections etc as required. Make L&T c&S

Supply and Fixing of CT linked selector switch of 10A meter (4 position) including making connections etc as required. Make L&T c&S

Supply and erection of 125 A 4 pole 25 KA MCCB adjustable, confirms to IEC 60947-2 and IS 13947- Part 1 & 2, having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted Make L&T c&S

Supply and laying of 6sqmm ISI marked FRLS insulated flexible copper cables 1100V grade as per IS: 694/1990 & IS:17048/2018 specification for copper cable for internal connections. Make finolex rrkable polycab

Supply and laying of 10 sqmm ISI marked FRLS insulated flexible copper cables 1100V grade as per IS: 694/1990 & IS:17048/2018 specification for copper cable for internal connections. Make finolex rrkable polycab

Supply and making end termination with heavy copper lugs upto 16 sqmm (pin/ ring type) as per IS specification, duly crimped with crimping tool, PVC tape etc., Make dowels

Supply and fixing of hylum sheet inside the meter panel board at meter

Supply and fixing of 25mm outer dia 1.6mm thick Ms conduit pipe inside the panel board for wires running

Supply and fixing of 40 A 2 pole 10 KA MCB confirms to ISI mark

Supply and fixing of 63 A 4 pole 10 KA MCB confirms to ISI mark

Supply and making end termination with heavy Alluminium lugs (pin/ ring type) as per IS specification duly crimped with crimping tool, PVC tape etc of 50 sqmm makes:Dowels/ Jainson/ Comet

Supply and making one end termination with heavy duty single compression brass gland as per BS 6121:2005 ,IP 66 complete, SIBG type, heavy duty Alluminium lugs of size 3.5 coreX 50 Sqmm duly crimped with crimping tool, PVC tape etc for of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as equired of size.Makes:Dowels/Comet/SMI)

Labour charges for laying of U.G cables up to 50sqmm on wall with necessart fixing arrangements such as saddles , clamps including cost and conveyance of all materials and labour charges etc., complete

Labour charges for laying of U.G cables up to 50sqmm in existing pipe as directed by the departmental official including cost and conveyance of all materials and labour charges etc., complete.

Supply and laying of 65mm medium grade G.I.Pipe for road crossing as directed by the field engineers during execution

Supply and Run of No.8 SWG copper wire including cost of all accessories and labour charges etc., complete. (0.104Kgs/1Mtr)

Providing independent earthing by exacavating a pit to a depth of 2.25Mtr in all soils as per size specified in the data for Important equipment with 2.5Mtr length 40mm dia C.I pipe and 18" dia 3" thick hume pipe ring with R.C.C. Slab cover duly providing staggered holes filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe giving earth connection from electrode through G.I strip of 25 x 6mm x 200mm length to be bolted with nut bolts including supply and termination of No.8 G.I.wire from bottm of the pipe with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)

Supplying fabrication and erection of MS Grills etc., including cost and conveyance of all materials to site and also Labour charges for fabricating steel works like Window Grills, Compound Wall Grills, Iron Doors, Windows including cost of welding rods, power charges, excluding cost of fixing in positionwith taxes and duties and labour charges for cutting, placing , welding and erection etc complete for finished item of work.

Painting to new iron works with 2 coats of approved synthetic enamel paint of approved brand and shade to give an even shade after thoroughly cleaning and sand papering the surface to remove all dirt and remains , including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for:-Painting to Iron work - Synthetic enamel paint to New Iron Work - 2 coats + 1 coat iron primer