Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.2 LAccepted-Finance | ₹7.2 L | L1 | Accepted-Finance Accepted Vide Resolution of Madhur GP |
| 2 | L2₹8.5 LRejected-Finance | ₹8.5 L | L2 | Rejected-Finance Higher rate |
| Sl No | Description | Qty | Unit | ABDUL RAHIMAN C M L2 | RIYAS L1 |
|---|---|---|---|---|---|
| 1.00MINI MCF | |||||
| 1.00 | 5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete | 21.6 | sqm | 329 ₹7,106.40 | 279.65 ₹6,040.44 |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) | 1.62 | cum | 7,824 ₹12,674.88 | 6,630 ₹10,740.60 |
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 999.34 | kg | 166 ₹1.7 L | 141.1 ₹1.4 L |
| 1.00 | 10.25.2:Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | 3,255 | kg | 151 ₹4.9 L | 131 ₹4.3 L |
| 1.00 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 131.2 | sqm | 724 ₹94,988.80 | 520 ₹68,224 |
| 1.01 | 50.9.15.2:Supplying and fixing 300 mm Aluminium aldrop | 10 | no | 220 ₹2,200 | 255 ₹2,550 |
| 1.01 | 10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 188.4 | kilogram | 100 ₹18,840 | 85 ₹16,014 |
| 1.01 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 199.2 | sqm | 141 ₹28,087.20 | 120.7 ₹24,043.44 |
| 1.01 | 13.71:Lettering with black Japan pint of approved brand and manufacture | 4,500 | per Letter per cm height | 5.5 ₹24,750 | 4.68 ₹21,060 |
Tender Value
₹8.5 L
EMD Value
₹21,153
Closing Date
12 Nov 2024, 6:00 pmClosed
ASSISTANT ENGINEER
THE ASSISTANT ENGINEER LID EW SECTION MADHUR GP
MADHUR GP PR NO 358/24-CONSTRUCTION OF MINI MCF IN 20 WARDS
2024_LSGD_702468_5
MADHUR GP/01/TN/AE/LIDEW/MDR 2024-25
Open Tender
Civil Works - Roads
180 days
MADHUR
Please refer Tender documents.
8 documents required · 8 mandatory
₹1,870
Yes
₹21,153
Yes
31 Dec 2025
4 Nov 2024
13 Nov 2024
4 Nov 2024
12 Nov 2024
4 Nov 2024
Amount
MINI MCF
5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
50.9.15.2:Supplying and fixing 300 mm Aluminium aldrop
10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
13.71:Lettering with black Japan pint of approved brand and manufacture
ABDUL RAHIMAN C M (BID ID -1972581)
Bidder Name
ABDUL RAHIMAN C M
RIYAS
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
finance_1098130.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid