PROVN OF EXTERNAL SERVICES FOR AMS AT AIR FORCE JAMNAGAR

Amount

NOTE: Schedule ‘A’ Part I to XIII are under Ser No. 1.00 to 13.00. are Prepriced by MES. Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only.

Lump sum price worked out for Building / Structures as listed in Sch `A’ Part I.

Lump sum price worked out by the Contractor for Earth works & Excavation as listed in Sch `A’ Part II

Lump sum price worked out by the Contractor for Internal Water Supply as listed inSch `A’ Part III

Lump sum price worked out by the Contractor for Internal electrification as listed in Sch 'A' Part IV

Lump sum price worked out by the Contractor for Road/Path/Culvert/Hard Standing as listed in Sch 'A' Part V

Lump sum price worked out by the Contractor for Sewage Disposal as listed in Sch `A’ Part VI.

Lump sum price worked out by the Contractor for Area Drainage as listed in Sch `A’ Part VII

Lump sum price worked out by the Contractor for External Water Supply Compound Wall/Fencing and Gate as listed in Sch `A’ Part VIII

Lump sum price worked out by the Contractor for External Electrification as listed in Sch `A’ Part IX.

Lump sum price worked out by the Contractor for Security wall fencing and Gate as listed in Sch `A’ Part X.

Lump sum price worked out by the Contractor for Lightening Protection as listed in Sch `A’ Part XI

Lump sum price worked out by the Contractor for Air Conditioning as listed in Sch `A’ Part XII.

Lump sum price worked out by the Contractor for Demolition and dismantling as listed in Sch `A’ Part XIII.

SCHEDULE 'A' PART - XIV (MISC ITEMS) (Note for items 14 to 50: The contractor shall quote his rate for each of these items separately. The estimated rate is left blank since the same is not prepriced by MES)

M&L for road marking with hot applied thermoplastic compound 2.5mm thick with reflectorising glass bends (glass bends @ 250g per/Sqm) to roads, pavements and the like finishing surface to uniform level and free from streaks & holes complete all as specified and as directed by Engineer -in- charge.

M&L for fabrication and erecting of sign board of size 1200 mm x 1200 mm (size of aluminium composite panel) erect in position as directed adopting the following specification / measurement (a) Main Post 2 Nos of stainless steel pipe 50 mm dia & 1.5 mm wall thickness of grade 316, length of each post 2.10 meter (1.80 meter above GL and 0.30 meter below GL) (b) Frame around aluminium sheet, fabricated with 25 mm size stainless steel square tube with 1.5 mm wall thickness including fixing arrangement for aluminium sheet and welded on main post. (c) 3 mm thick aluminium composite panel material consisting of 2 mm thick mineral core sandwiched between two Aluminium sheets (each 0.5 mm thick). The aluminium composite panel shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on exposed face and polymer (Service) coating on other face, fixed over ss frame as mentioned at serial No (b) above.

(d) Providing both side of aluminium sheet High intensity prismatic grade retro reflective sheeting as base and with cut out massage (legends borders, letters numerals, site map etc, as per design and pattern approved) with high intensity prismatic grade retro reflective sheeting, pasting as per manufacturers instruction. (e) Excavating 2 Nos post hole of size 300 mm x 300 mm x 450 mm in any type of soil and fixing of main post and filled with PCC 1:2:4 type B1 using 20 mm graded stone grade, removing surplus soil to distance not exc 50 meter and site clearance as per satisfaction of Engineer in Charge complete. Note:- Stainless steel section mentioned above shall be of grade 316

S&F road safety convex mirror made up of polycarbonate reflective mirrors and body made of ABS/Fibber/Plastic of size 100cm dia including MS pipe 75mm dia of 2.4M length duly powder coated embeded in PCC 1:2:4 of size 45cm x 45cm x 45 cm including excavation earth work in any type of soil complete all as specified and as directed by Engr-in-charge

S&F Road studs ABS material 100mm x 100mm x 20mm two side Acrylic plastic reflectors etc. complete all as specified and as directed by Engineer-in-Charge.

S&F Modular speed breaker made of sturdy plastic (ABS) of high resistence to serve impacts interlocking frip & design to behave like one single bump0 & UV stabiliters results in permanents colours which does not fade easily and having acrylic reflectors fixed on front & back to help in identifying the location of speed breaker from a large distance, all as specified and as directed by Engineer-in-Charge.

S&F Distribution board made out of sheet metal powder coated, factory made, enclousure double door type TPN 4 way vertical type with 200 (Amps rated copper bus bar, neutral bar, earth bar, TP 43 protection including provision of housing of incomer MCCB 63 Amps, triple pole and neutral, 415V, 16 KA breaking capacity fixing of DB flush to wall surface complete all as specified and directed.

Supply and fix wall mounted fan 400 mm sweep, 230 V 50 Hz, with all connected accessories, fixed as per manufacturer's instruction and connecting complete all as specified as directed.

Supply and fix LED wall mounted bracket light fitting champage gold finish fixture with plastic body suitable for retrofit LED bulb / lamp (holder B22) 10 watt, polycarbonate white opal diffuser for glare free light, as specified and directed by Engg –in-charge.

Supply and fixing High beam revolving search light LED 300 W 700 Mtr focus range, High intensity LED, Energy saving long rage , IP-66, High lumen output>140 lm/w, PF>.95, CCT 5000K-6500K, CRI>70, optical grade PMMA/PC lensrelator efficiency >95%, multiple circuit to avoid complete rum down, narrow beam 7 degree, die cast LM6 body with air fins contant current, average lux (in 500mm circle) at 10 meter away 2500-6000, working volatge 100v-300v, protection from short circuit, over load, low/high volt, working temp -20 degree C to + 60 degree C with CS stand manually operated for suitable for mounting of search light on watch tower , stand made out of Steel & suitable for manual ratation of light on the horizontal(more than 360 degree)and vertically(more than 45 degree) with provision of both locking arrengement at desired position complete all as speciifed.

Supply and fix flame proof exhaust fan of size 305 mm (12'') sweep 240 V 50 Hz ,1440 RPM single phase heavy duty complete with louver shutter and flame proof wire from ceiling rose to exhaust fan complete all as specified & directed by Engg in charge.

Supply and fix flame proof and weather proof industrial type DBs with various combination of incoming and outgoing MCB suitable for and including (a) 01 No MCB SPN 16 Amps, C type (incoming) (b) 1 Nos MCB SP 10 Amps C type including necessary connection complete all as specified & directed by Engg in charge.

Supply, installation, testing and commissioning of extensible 11 KV , 630 Amps, outdoor type safe plus Extensible Compact switch gear "Ring Main unit" two incoming and one out going having 02 No motorised Vacuum circuit break switch, 01 No load break switch and 01 No Metering module as Bus PT along with bottom cable entry and front cable termination with following specification PCC and block masonary for installation of Ring Main Unit complete as per manufacturer instruction and design all as dirtected:-

STANDARDS AND MECHANICAL DATA Metal Enclosed switchgear: IEC 62271-200 General Purpose switches: IEC 60265-1 Disconnectors and Earthing switches: IEC 62271-102 Circuit Breakers: IEC 62271-100 Common clauses: IEC 60694 Pressure of SF6 gas: 1.4 bar at 20 °C Cable bushings: DIN 47636 Temperature class: -25 °C - +40 °C Outdoor Degree of protection: SF6 tank: IP 67 Front cover: IP 2X Cable cover: IP 3X Enclosure: IP 54 Busbars: 240 mm2 Cu Earth bar (external): 120 mm2 Cu - Bolt dimension: M10 Thickness of Stainless Steel Tank: 2.5 mm Colours: Front cover: RAL 7035 Side and cable cover: RAL 7035

Enclosure: IS 632 ELECTRICAL DATA – 12 kV - 28kV-1min Rated current busbars: 630 A Rated current cable switch disconnector : 630 A Short time withstand current: Cable switch disconnector with interface C (400-bolt) bushing: 20kA/3 sec. Vacuum circuit breaker with interface C (400-bolt) bushing: 20 kA/3 sec Rated current for transformer T-off : 630 A Impulse withstand voltage : To earth and between phases: 75 kV Insulation level: Power frequency 1 min: 28 kV A01 to A02 Incoming Vacuum Circuit Breaker Module Type V (i) SafePlus V is a Vacuum circuit breaker module with vacuum circuit breaker, three position isolator/earthing switch, busbars, interlocking, earthbar and stored spring energy mechanism (A-mech.). (ii) SafePlus type V: Vacuum circuit breaker 12kV, 630A - 02 Nos Stored energy mech. for manual operation - 01 Nos

(iii) Self Powered OC+EF Protection Relay - 01 Nos (iv) Set of 03nos. Ring Core Protection CTs of suitable ratio as per feeder load, 2.5VA, 10P10 - 01 Nos (v) Set of 03nos. Ring Core Metering CTs of suitable ratio as per feeder load, 2.5VA, Class 1.0 - 01 Nos (vi) Capacitive voltage indication fixed type VPIS 6-12 kV - 01 Nos (vii) Aux. Relay for generating Potential Free Contact from Capacitive Voltage Indicator - 01 Nos A03 Load break switch Module Type C (i) SafePlus C is a Load Break switch module with , three position isolator/earthing switch, busbars, interlocking, earthbar and stored spring energy mechanism (A-mech). (ii) SafePlus type C: Load break switch 12kV, 630A - 01 No (iii) Stored energy mech. for manual operation - 01 Nos (iv) Capacitive voltage indication fixed type VPIS 6-12 kV - 01 Nos (v) Aux. Relay for generating Potential Free Contact from Capacitive Voltage Indicator - 01 Nos

A04 Metering Module Type M (i) SafePlus M is an air insulated metering module. (ii) SafePlus type M: Air insulated metering module 12kV, 630A (IAC AF 16kA 1 s)- 01 Nos (iii) Set of 03nos. single-phase potential transformers having ratio 11kV/rt3:110V/rt3, 25VA, Class 1.0 with HRC fuses for protection on primary side and MCBs for protection on secondary side.- 01 Nos (iv) Space Heater (230VAC)- 01 Nos Low Voltage Box inside the metering enclosure for mounting:- 01 Nos · Multifunction Meter for each feeder · CSPC make Under/Over Voltage Relay · 2x12VDC Battery+Charger scheme · R-Y-B Phase Indication

Supply and fix 11 KV , 630 Amps,outdoor type safe plus Compact switch gear Ring Main unit for one incoming and one outgoing having 01 No motorised Vacuum circuit break switch, 01 No load break switch and 01 No Metering module as Bus PT along with bottom cable entry and front cable termination with following specification PCC and block masonary for installation of Ring Main Unit complete as per manufacturer instruction and design all as dirtected :-

A01 Vacuum Circuit Breaker Module Type V (i) SafePlus V is a Vacuum circuit breaker module with vacuum circuit breaker, three position isolator/earthing switch, busbars, interlocking, earthbar and stored spring energy mechanism (A-mech.). (ii) SafePlus type V: Vacuum circuit breaker 12kV, 630A - 01 Nos Stored energy mech. for manual operation - 01 Nos (iii) Self Powered OC+EF Protection Relay - 01 Nos (iv) Set of 03nos. Ring Core Protection CTs of suitable ratio as per feeder load, 2.5VA, 10P10 - 01 Nos (v) Set of 03nos. Ring Core Metering CTs of suitable ratio as per feeder load, 2.5VA, Class 1.0 - 01 Nos (vi) Capacitive voltage indication fixed type VPIS 6-12 kV - 01 Nos (vii) Aux. Relay for generating Potential Free Contact from Capacitive Voltage Indicator - 01 Nos

A02 Load break switch Module Type C (i) SafePlus C is a Load Break switch module with , three position isolator/earthing switch, busbars, interlocking, earthbar and stored spring energy mechanism (A-mech). (ii) SafePlus type C: Load break switch 12kV, 630A - 01 No (iii) Stored energy mech. for manual operation - 01 Nos (iv) Capacitive voltage indication fixed type VPIS 6-12 kV - 01 Nos (v) Aux. Relay for generating Potential Free Contact from Capacitive Voltage Indicator - 01 Nos

A03 Metering Module Type M (i) SafePlus M is an air insulated metering module. (ii) SafePlus type M: Air insulated metering module 12kV, 630A (IAC AF 16kA 1 s)- 01 Nos (iii) Set of 03nos. single-phase potential transformers having ratio 11kV/rt3:110V/rt3, 25VA, Class 1.0 with HRC fuses for protection on primary side and MCBs for protection on secondary side.- 01 Nos (iv) Space Heater (230VAC)- 01 Nos Low Voltage Box inside the metering enclosure for mounting:- 01 Nos · Multifunction Meter for each feeder · CSPC make Under/Over Voltage Relay · 2x12VDC Battery+Charger scheme · R-Y-B Phase Indication

Supply and fix 11 KV , 630 Amps,outdoor type one incoming and one outgoing 01 Nos motories load break switch with bottom cable entry and front cable termination with following specification PCC and block masonary for installation of load break switch unit complete as per manufacturer instruction and design all as dirtected:-

A01 Load break switch Module Type C (i) SafePlus C is a Load Break switch module with , three position isolator/earthing switch, busbars, interlocking, earthbar and stored spring energy mechanism (A-mech). (ii) SafePlus type C: Load break switch 12kV, 630A - 01 No (iii) Stored energy mech. for manual operation - 01 Nos (iv) Capacitive voltage indication fixed type VPIS 6-12 kV - 01 Nos (v) Aux. Relay for generating Potential Free Contact from Capacitive Voltage Indicator - 01 Nos

Taking out HT U/G cable of any size including cable protection pipe from existing trench and re-routing the same in new trench all as directed by Engr-in-Charge.

Supply and fix PCC route indicator pedestal type of size 90cmx30cmx10cm made out of RCC with 10mm dia rod circular above the GL 60 CM & below 30 CM with PCC(1:2:4) type B1 above GL,PCC(1:4:8) in foundation below ground level duly HT/LT cable-MES etc all as specified and as directed.

Supply and laying PCC HT line route indicator of size 450 mm x 230mm x 50 mm above the ground and 250 mm in depth complee with red colour duly engraved HT/LT cable-MES all directed by Engg- in-charge

M & L for boring under roads/pavement/hardstanding without disturbing the top surface by trench less technology using ultra sound technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure for passing through the cables complete all as specified and as directed. (Note : Necessary infrastructure reqd for boring shall be arranged by the Contractor at his own cost).

Supply and fix Synthetic Rubber insuldated mats 2.5mm thick for voltage upto 11 KV for electrical purpose as per IS 15652-2006, (superseding IS 5424) suitable for electrical shock safety of sizes 2m x 1m complete all as specified and directed.

Supply install testing and commissioning of diesel Engine driven generating set 62.5 KVA capacity, 3 phase, 4 wire, 440 V, 1500 RPM, 50 Hz power supply with power factor 0.8 coupled directly to alternator mounted on a common base plate complete with integrated acoustic enclosures having salient features modular bolted construction with fabrication on imported CNC turrert punch machines, Nine tank treatment process with pure polyester based powder coating to ensure long life in all weather conditions and for out door application/installation. Integrated design thereby facilating/easy handling installation and shifting of the eqpt at site. The design of integrated acoustic enclosure should be of type approved by National physical laboratory as per central pollution control board (CPCB) latest norms/regulation with fuel tank, battery and standard accessories including cost of PCC (1:2:4) type B-1 foundation for (acoustic enclosures foundation Height shall be 800 mm out of which 500 mm shall be above ground level) as recommended by manufacturer , Vibration pad sand cushioning around PCC foundation etc all and Tools and spares as provided by manufacturer all as specified and as directed with the following specifications :-

(A) ENGINE : Water cooled with radiator diesel Engine (confirming to IS : 10001/10002) of 1500 RPM capacity to match the 62.5KVA alternator under NTP conditions with provision of 10% overload for 1 hour in every 12 hours running conforming to IS 6514/ IS 10001 / 10002 the Engine shall consist of the following :- (i) Fly wheel (ii) Flexible coupling with guard bolts and nuts etc. (iii) Air cleaner heavy duty dry type (iv) Radiator with guard and water pump engine mounted. (v) Dynamo of suitable capcity. (vi) Air cleaner heavy duty dry. (vii) Fuel injuction pump. (viii) Radiator fan (Blower type) with guard. (ix) Electronicv/ A1 class governer. (x) Fuel filter (Mounted).

(xi) Lubricating oil filter (mounted). (xii) 12V self regulating alternator belt driven by engine. (xiii) Exhaust silencer heavy duty residential type and retrofitting of emission control deivce as per NGT norms. (xiv) Corrosion resistor / scale inhibitor. (xv) Starter 12 V DC. (xvi) Lubricating oil cooler. (xvii) Lubricating oil pump (Gear type). (xviii) Turbo Charger. (xix) Exhaust piping shall be insulated with asbastos rope duly cladded with aluminium sheet. (xx) Instrument panel complete with the following:- (a) Auto mannual starting switch with key. (b) Lubricating oil tempreture gauge. (c) Lubricating oil pressure gauge. (d) Water tempreture gauge. (e) Battery charging ammeter. (f) Battery charging indicating lamp. (g) Hour meter with RPM indicator. (h) Safety control against high temperature of water. (j) Safety control against low lubricating oil pressure. (k) Over speed stop with double driven adoptor.

(B) BRUSH LESS ALTERNATOR (i) Alternator coupled to Engine through a flexible coupling to an indigenous alternator mounted on strong steel fabricated base frame suitable for mounting on a permanent foundation brushless alternator shall be conforming to BS-2613 or relevant IS-13364 (ii) Type :- Self excited self regulated with automatic voltage regulator. (iii) Rating :- 62.5 KVA at 0.8 PF lagging 4 pole hozontal at NTP condition 3 (iv) Speed :- 1500 RPM (v) System :- 415 Volts +/- 2.5% AC 3 Phase 4 wire 50 Hz. (vi) Connection :- 4 wire star connected. (vii) Enclosure :- Screen protected dip proof. (viii) Ventilation :- Self ventilated (ix) Insulation :- Insulation Class H

(vi) LED type signal lamp for DG set/ commercial power on off indication - 06 nos (vii) Copper bus bar of suitable size. (viii) Circuit diagramed plate (ix) CT operated KWH metre - 01 No (x) Power factor meter digital type - 01 No (xi) Reverse power relays, over current and short circuit protection relay with suitable CTs and suitable contactors, - 01 Set (xii) mannual mode, auto mode, test mode - 01 set (xiii) single phase preventer - 04 Nos (xiv) Battery charger (xv) All relays/power contactors of suitable size and capacity

(D) ONE SET OF ACCESSORIES COMPRISING OF :- (a) FUEL TANK :- One No of sheet steel 14 SWG and capacity to hold diesel sufficient for running 16 hrs running at full load including necessary piping. (i) Level indicator on fuel tank (ii) Drain plug (iii) MS class 'C' piping for inlet from pump to tank of engine (iv) Fuel strainer (v) Air vent. (b) BATTERY As recommended by manufacturers

(E) Acoustic enclosure - Acoustic Enclosure suitable for 63 KVA DG set as under. (i) Fabricated out of CRCA sheet of suitable thickness not less than 1.6mm. Polyster based powder, coated internaly and externaly with lockable type door handle. All nuts and handles shall be zinc coated. (ii) The door are gasketed with EPDM gaskets. The construction should be such that it prevent entry of rain water splashing in to enclosure and allows free and quick flow of rain water to the ground in the event of heavy rain. (iii) Sound proofing with high quality rock wool/mineral wool confirming to IS 8183 of density at 96 Kg/CUM covered with fiber glass cloth and perforated powder coats sheet specially desinged alternators (Sound controller) at air entry and exit of the container noise level shall be not exceed 75 Db at 1 meter distance as per CPCB norms.

(iv) Adequate ventilation to meet air requirement not for combustion and heat removal with prove of a blower. (v) Emergency stop push button outside the container. (vI) Provn of light inside the canopy providing of FTL fitting 1x20 watt with wiring and control switch. (vii) The canopy should be provided with light enclosure temprature safty device. (F) BASE PLATE Sturdy, fabricated welded contruction out of MS channels ISMC of suitable size suitable for fixing of DG set, required anti-vibration mounting pads shall be provided all specified by the manufacturer.

Supply install testing and commissioning of diesel Engine driven generating set 250 KVA capacity, 3 phase, 4 wire, 440 V, 1500 RPM, 50 Hz power supply with power factor 0.8 coupled directly to alternator mounted on a common base plate complete with integrated acoustic enclosures having salient features modular bolted construction with fabrication on imported CNC turrert punch machines, Nine tank treatment process with pure polyester based powder coating to ensure long life in all weather conditions and for out door application/installation. Integrated design thereby facilating/easy handling installation and shifting of the eqpt at site. The design of integrated acoustic enclosure should be of type approved by National physical laboratory as per central pollution control board (CPCB) latest norms/regulation with fuel tank, battery and standard accessories including cost of PCC (1:2:4) type B-1 foundation for (acoustic enclosures foundation Height shall be 800 mm out of which 500 mm shall be above ground level) as recommended by manufacturer , Vibration pad sand cushioning around PCC foundation etc all and Tools and spares as provided by manufacturer all as specified and as directed with the following specifications :-.

(A) ENGINE : Water cooled with radiator diesel Engine (confirming to IS : 10001/10002) of 1500 RPM capacity to match the 250 KVA alternator under NTP conditions with provision of 10% overload for 1 hour in every 12 hours running conforming to IS 6514/ IS 10001 / 10002 the Engine shall consist of the following :- (i) Fly wheel (ii) Flexible coupling with guard bolts and nuts etc. (iii) Air cleaner heavy duty dry type (iv) Radiator with guard and water pump engine mounted. (v) Dynamo of suitable capcity. (vi) Air cleaner heavy duty dry. (vii) Fuel injuction pump. (viii) Radiator fan (Blower type) with guard. (ix) Electronicv/ A1 class governer. (x) Fuel filter (Mounted).

(xi) Lubricating oil filter (mounted). (xii) 12V self regulating alternator belt driven by engine. (xiii) Exhaust silencer heavy duty residential type and retrofitting of emission control deivce as per NGT norms. (xiv) Corrosion resistor / scale inhibitor. (xv) Starter 12 V DC. (xvi) Lubricating oil cooler. (xvii) Lubricating oil pump (Gear type). (xviii) Turbo Charger. (xix) Exhaust piping shall be insulated with asbastos rope duly cladded with aluminium sheet. (xx) Instrument panel complete with the following:- (a) Auto mannual starting switch with key. (b) Lubricating oil tempreture gauge. (c) Lubricating oil pressure gauge. (d) Water tempreture gauge. (e) Battery charging ammeter. (f) Battery charging indicating lamp. (g) Hour meter with RPM indicator. (h) Safety control against high temperature of water. (j) Safety control against low lubricating oil pressure. (k) Over speed stop with double driven adoptor.

(B) BRUSH LESS ALTERNATOR (i) Alternator coupled to Engine through a flexible coupling to an indigenous alternator mounted on strong steel fabricated base frame suitable for mounting on a permanent foundation brushless alternator shall be conforming to BS-2613 or relevant IS-13364 (ii) Type :- Self excited self regulated with automatic voltage regulator. (iii) Rating :-250 KVA at 0.8 PF lagging 4 pole hozontal at NTP condition 3 (iv) Speed :- 1500 RPM (v) System :- 415 Volts +/- 2.5% AC 3 Phase 4 wire 50 Hz. (vi) Connection :- 4 wire star connected. (vii) Enclosure :- Screen protected dip proof. (viii) Ventilation :- Self ventilated (ix) Insulation :- Insulation Class H

(vi) LED type signal lamp for DG set/ commercial power on off indication - 06 nos (vii) Copper bus bar of suitable size. (viii) Circuit diagramed plate (ix) CT operated KWH metre - 01 No (x) Power factor meter digital type - 01 No (xi) Reverse power relays, over current and short circuit protection relay with suitable CTs and suitable contactors, - 01 Set (xii) mannual mode, auto mode, test mode - 01 set (xiii) single phase preventer - 04 Nos (xiv) Battery charger (xv) All relays/power contactors of suitable size and capacity

(D) ONE SET OF ACCESSORIES COMPRISING OF :- (a) FUEL TANK :- One No of sheet steel 14 SWG and capacity to hold diesel sufficient for running 16 hrs running at full load including necessary piping. (i) Level indicator on fuel tank (ii) Drain plug (iii) MS class 'C' piping for inlet from pump to tank of engine (iv) Fuel strainer (v) Air vent. (b) BATTERY As recommended by manufacturers c) Acoustic enclosure- Acoustic Enclosure suitable for 250 KVA DG set as under. i) Fabricated out of CRCA sheet of suitable thickness not less than 1.6mm. Polyster based powder coated internaly and externaly with lockable type door handle. All nuts and handles shall be zinc coated. ii) The doors are gasketed with EPDM gaskets. The construction should be such that it prevent entry of rain water splashing in to enclosure and allows free and quick flow of rain water to the ground in the event of heavy rain,

iii) Sound proofing with high quality rock wool/mineral wool confirming to IS 8183 of density at 96 Kg /M3 coverd with fiber glass cloth and perforated powder coats sheet specialy designed allenuators (Sound controller) at air entry and exit of the container noice level shall be not exceed 75 Db at 1 meter distance as per CPCB norms. iv) Adequate ventilation to meet air requirement for combustion and heat removal with provn of a blower. v) Emergency stop push button out side the container. vi) Provn of light inside the canopy providing of FTL fitting 1x20 watt with wiring and control switch. vii) The canopy should be provided with hight enclosure temprature safty device. As recommended by manufacturers (C) BASE PLATE Sturdy, fabricated welded contruction out of MS channels ISMC of suitable size suitable for fixing of DG set, required anti-vibration mounting pads shall be provided all specified by the manufacturer.

Supply install testing and commissioning of diesel Engine driven generating set 750 KVA capacity, 3 phase, 4 wire, 440 V, 1500 RPM, 50 Hz power supply with power factor 0.8 coupled directly to alternator mounted on a common base plate complete with integrated acoustic enclosures having salient features modular bolted construction with fabrication on imported CNC turrert punch machines, Nine tank treatment process with pure polyester based powder coating to ensure long life in all weather conditions and for out door application/installation. Integrated design thereby facilating/easy handling installation and shifting of the eqpt at site. The design of integrated acoustic enclosure should be of type approved by National physical laboratory as per central pollution control board (CPCB) latest norms/regulation with fuel tank, battery and standard accessories including cost of PCC (1:2:4) type B-1 foundation for (acoustic enclosures foundation Height shall be 800 mm out of which 500 mm shall be above ground level) as recommended by manufacturer , Vibration pad sand cushioning around PCC foundation etc all and Tools and spares as provided by manufacturer all as specified and as directed with the following specifications :-.

(A) ENGINE : Water cooled with radiator diesel Engine (confirming to IS : 10001/10002) of 1500 RPM capacity to match the 750 KVA alternator under NTP conditions with provision of 10% overload for 1 hour in every 12 hours running conforming to IS 6514/ IS 10001 / 10002 the Engine shall consist of the following :- (i) Fly wheel (ii) Flexible coupling with guard bolts and nuts etc. (iii) Air cleaner heavy duty dry type (iv) Radiator with guard and water pump engine mounted. (v) Dynamo of suitable capcity. (vi) Air cleaner heavy duty dry. (vii) Fuel injuction pump. (viii) Radiator fan (Blower type) with guard. (ix) Electronicv/ A1 class governer. (x) Fuel filter (Mounted).

(xi) Lubricating oil filter (mounted). (xii) 12V self regulating alternator belt driven by engine. (xiii) Exhaust silencer heavy duty residential type and retrofitting of emission control deivce as per NGT norms. (xiv) Corrosion resistor / scale inhibitor. (xv) Starter 12 V DC. (xvi) Lubricating oil cooler. (xvii) Lubricating oil pump (Gear type). (xviii) Turbo Charger. (xix) Exhaust piping shall be insulated with asbastos rope duly cladded with aluminium sheet. (xx) Instrument panel complete with the following:- (a) Auto mannual starting switch with key. (b) Lubricating oil tempreture gauge. (c) Lubricating oil pressure gauge. (d) Water tempreture gauge. (e) Battery charging ammeter. (f) Battery charging indicating lamp. (g) Hour meter with RPM indicator. (h) Safety control against high temperature of water. (j) Safety control against low lubricating oil pressure. (k) Over speed stop with double driven adoptor.

(B) BRUSH LESS ALTERNATOR (i) Alternator coupled to Engine through a flexible coupling to an indigenous alternator mounted on strong steel fabricated base frame suitable for mounting on a permanent foundation brushless alternator shall be conforming to BS-2613 or relevant IS-13364 (ii) Type :- Self excited self regulated with automatic voltage regulator. (iii) Rating :-750 KVA at 0.8 PF lagging 4 pole hozontal at NTP condition 3 (iv) Speed :- 1500 RPM (v) System :- 415 Volts +/- 2.5% AC 3 Phase 4 wire 50 Hz. (vi) Connection :- 4 wire star connected. (vii) Enclosure :- Screen protected dip proof. (viii) Ventilation :- Self ventilated (ix) Insulation :- Insulation Class H

(vi) LED type signal lamp for DG set/ commercial power on off indication - 06 nos (vii) Copper bus bar of suitable size. (viii) Circuit diagramed plate (ix) CT operated KWH metre - 01 No (x) Power factor meter digital type - 01 No (xi) Reverse power relays, over current and short circuit protection relay with suitable CTs and suitable contactors, - 01 Set (xii) mannual mode, auto mode, test mode - 01 set (xiii) single phase preventer - 04 Nos (xiv) Battery charger (xv) All relays/power contactors of suitable size and capacity

(D) ONE SET OF ACCESSORIES COMPRISING OF :- (a) FUEL TANK :- One No of sheet steel 14 SWG and capacity to hold diesel sufficient for running 16 hrs running at full load including necessary piping. (i) Level indicator on fuel tank (ii) Drain plug (iii) MS class 'C' piping for inlet from pump to tank of engine (iv) Fuel strainer (v) Air vent. (b) BATTERY As recommended by manufacturers c) Acoustic enclosure- Acoustic Enclosure suitable for 750 KVA DG set as under. i) Fabricated out of CRCA sheet of suitable thickness not less than 1.6mm. Polyster based powder coated internaly and externaly with lockable type door handle. All nuts and handles shall be zinc coated. ii) The doors are gasketed with EPDM gaskets. The construction should be such that it prevent entry of rain water splashing in to enclosure and allows free and quick flow of rain water to the ground in the event of heavy rain,

iii) Sound proofing with high quality rock wool/mineral wool confirming to IS 8183 of density at 96 Kg /M3 coverd with fiber glass cloth and perforated powder coats sheet specialy designed allenuators (Sound controller) at air entry and exit of the container noice level shall be not exceed 75 Db at 1 meter distance as per CPCB norms. iv) Adequate ventilation to meet air requirement for combustion and heat removal with provn of a blower. v) Emergency stop push button out side the container. vi) Provn of light inside the canopy providing of FTL fitting 1x20 watt with wiring and control switch. vii) The canopy should be provided with hight enclosure temprature safty device. As recommended by manufacturers (C) BASE PLATE Sturdy, fabricated welded contruction out of MS channels ISMC of suitable size suitable for fixing of DG set, required anti-vibration mounting pads shall be provided all specified by the manufacturer.

Supply and installation, testing, commissioning, factory made, (CPRI approved manufacture), outdoor type, LT panel board, confirming to IS 8623 with IP-54 protection, made out of 3.15mm thick CRCA sheet, 415 volt, 3 phase, 50 HZ supply mounted on and including MS angle section 40x40x5mm frame with front and back openable, double door with provision of locking arrangement dust & vermin proof, gasket, TPN busbar shall be insulated with colour coated heat shrinkable sleeves and shall be mounted on proper insulator, gland, welding hinges of dust proof, overall powder coated complete all as specified and directed & connecting of the following equipments:-

Supply and installation, testing, commissioning, factory made, CPRI approved, outdoor type, LT panel board, confirming to IS 8623 with IP-54 protection, made out of 3.15mm thick CRCA sheet, 415 volt, 3 phase, 50 HZ supply mounted on and including MS angle section 40x40x5mm frame with front and back openable, double door with provision of locking arrangement dust & vermin proof, gasket, TPN busbar shall be insulated with colour coated heat shrinkable sleeves and shall be mounted on proper insulator, gland, welding hinges of dust proof, overall powder coated complete all as specified and directed & connecting of the following equipments:-

Supply and installation, testing, commissioning, factory made, CPRI approved, outdoor type, LT panel board, confirming to IS 8623 with IP-54 protection, made out of 3.15 mm thick CRCA sheet, 415 volt, 3 phase, 50 HZ supply mounted on and including MS angle section 40x40x5mm frame with front and back openable, double door with provision of locking arrangement dust & vermin proof, gasket, TPN busbar shall be insulated with colour coated heat shrinkable sleeves and shall be mounted on proper insulator, gland, welding hinges of dust proof, overall powder coated complete all as specified and directed & connecting of the following equipments :-

S & F pole mounted junction box ( Street light boxes) sliding type ( Door fits to base by means of sliding) for 3 phase 4 wire lighting system, moulded in FRP including provision of 2 Nos MCB 16 Amps and busbar insulator- 4 Nos with nut & bolts with fixing arrangement, outdoor type of dimesions 340 X 160X 123mm (H X W X D) Product codeGS - JB- 3016S complete all as specified and directed by Engg-in-Charge."

S&F LED Street Light fitting 45 watt, system efficiency not less than 100 lumen / watt, IP65 protection, with 10 KA surge protection, consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp & driver compartment, Heat resistance toughened glass fitted in cast aluminium housing with SS screws, fixed on existing bracket & connecting complete all as directed complete

Material and labour for tripod chemical earthing (comprising of three chemical earthing) as directed by Engineer-in-charge . The chemical earthing will have specification as follows:- (a) Copper electrode of wall thickness mimimum 2 mm not less than 3 mtr length with not less than 75mm outer dia. (b) Fixing of copper Earth Electrode by drilling/boring 175mm dia hole, 5.00 mtr deep in any type of strata, placing electrode in hole, return filling excavated soil by mixing min 10Kg GEL per bore and 75 kg Soil Resistivity Improvement (SRIP) compound as per manufacturer instruction (c) FRP earthing result display board 254 x 380mm made out of plastic material showing information related to type of earthing, earthing result, due date of testing alongwith fixing size 610mm height made of plastic hollow pipe of dia 20mm. (d) The earthing result will be obtained from Tripode must be less than 1Ω. Otherwise contractor is liable to do chemical earthing to meet the result. (e) Contractor must visit the site before quoting the tender the understand the dificulty of cost for carrying out the job in the station. It is important that contractor ascertain the quantum of work.

S & F LED Flood light fitting 120 watt, system efficiency not less than 115 lumens/watt, IP 65 protection consisting of high/low voltage cut off maintenance free isolated electronic driver circuits, with 10 KA surge protection, low THD PMMA grade high quality. Transmittance lens, epoxy powder coated Die cast Aluminium housing with weather proof gasket for lamp & driver compartment, Heat resistance toughened glass fitted in cast aluminium housing with SS screws fixed on modified GI pipe of approx length of 3 Mtr including excavation in post hole in soft / loose soil, PCC 1:3:6 type C2 for fixing of light fitting over PCC as per manufacturer instruction & connecting complete all as specified and directed by Engg –in-charge.

Supply and lay in trenches ductile iron pipes, socket and Spigot ends, of size DN150 mm dia bore, ISI marked Centrifugally Cast (Spun) Ductile Iron Pressure pipes conforming to IS:8329/2000 classification K-7 rating, suitable for push-on-joint(Rubber gasket-D jointing) with cement mortor lining inside the pipes and outside zinc coating with Bituminous finish coat as per IS:8329/2000 including EPDM rubber joints conforming IS: 5382 of 1985 all as specified and as directed by Engg-in-charge

Supply and lay in trenches ductile iron pipes, socket and Spigot ends, of size DN100 mm dia bore, ISI marked Centrifugally Cast (Spun) Ductile Iron Pressure pipes conforming to IS:8329/2000 classification K-7 rating, suitable for push-on-joint(Rubber gasket-D jointing) with cement mortor lining inside the pipes and outside zinc coating with Bituminous finish coat as per IS:8329/2000 including EPDM rubber joints conforming IS: 5382 of 1985 all as specified and as directed by Engg-in-charge

S&F DI fitting for DI spigot and socketed / flanged ends pipes like bends (any type, radius and angle) increasing, decreasing or double socketed / flanged tee pieces single branch 'Y' junction double branch, cross collars caps and plugs, connecting pieces one end flanged and other end socket or spigot and bell mouth pieces one end flanged other end tapering as bell mouth suitable for up to 300 mm bore pipe complete all as specified.

Material and laboure for construction of valve chamber of size 1200 x 1200 x 1000 mm deep dimensions (Over all internal dimension) for sluice valve etc. with PCC foundation, PCC block masonry walls, Plastering, PCC Coping, white washing, mild steel chamber cover, painting to chamber cover including Excavation and earth work in any type of soil complete all as specified below:- Valve chamber shall be provided with the following specifications:- (i) Cement concrete for foundation (1:4:8) type D2 using 40mm graded stone aggregate 150 mm thick extended up to 150 mm beyond the outer face of block masonry. (ii) Walls of valve chamber 200 mm thick with precast cement concrete (1:3:6) (using 20mm graded stone aggregate) solid building blocks , setting in CM 1:6 complete all as specified and directed by Engg-in-Charge.

(iii) Internal and exposed surfaces of valve chamber both concrete and block masonry surface shall be plastered with CM (1:4), 15 mm thick finished even and smooth. (iv) 50 mm thick coping in PCC 1:3:6 type C1 over block masonry wall. (v) Entire plastered surfaces shall be treated with 3 coat of white wash. (vi) Chamber cover shall be of 6 mm thick fiber reinforced polymer (FRP) sheet with 30 x 30 x 5 mm size angle iron frame with hold fast and locking arrangement. steel surface shall be painted with two coats of synthetic paint of first quality over one coat of red oxide primer.

Supply & fix epoxy insulators with necessary fixing arrangements on wall/roof etc complete all as specified and directed by Engg-in-Charge.

Supply and install Refrigerator Electric driven (Single phase) 230 V, having approx cooling capacity of 310 litre, Double door type, five star rated along with following specifications :- (a) Smart inverter compressor charged with non CRC, eco friendly refrigerent gas complete all as specified and directed by Engg-in-Charge.

Supply and fix service cable PVC/ XLPE insulated copper 2.5 sqmm 2 core for street light fittings from bottom of the pole /pole box complete all as specified and directed by Engg-in-Charge.

Supply and fix earth continuity conductor or main earthing strip of Copper strip of size 25x3.15mm complete fixed to wall/celing in any position or any other situation for loop earthing etc with and including epoxy insulators with necessary fixture complete all as specified and directed by Egg in Charge.

vijay infraprojects pvt ltd

M/s godara infratech and power industries

M/s Matadeen Ramchandra Agarwal

Jeet Construction