REPAIR/MAINT TO CERTAIN B/R ITEMS IN OTM AND MD ACCN UNDER GE ROORKEE

Amount

Dismantling timber scantling 40 sq cm & over in section, any position in unframed work complete all as specified and directed.

M&L 2nd class hard wood in timbers scantling fixed in clean sawn complete all as specified and directed.

M&L preparation surfaces of wood new or old of any description and girth not otherwise described and treated with creosote oil complete as specified and directed.

Dismantling of Asbestos cement (corrugated, semi corrugated etc)/CGI sheets in roof covering complete all as specified and directed.

Dismantling of CGI (corrugated, semi corrugated etc) sheets in roof covering complete all as specified and directed.

Material and Labour, for pre-painted, galvalume aluminium zinc coating GI based profiled steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa AZ-150, as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F 0.50mm thick pre-painted galvalume zinc coated GI based plain sheet of any colour having tensile strength of 550 Mpa, AZ-150 fixed as in roof covering/ cladding to wall, ridges, valley gutter etc with self tapping screws complete all as specified and directed.

M&L for PCC (1:2:4) Ty B-0 using 12.5mm thick course aggregate as in PCC Gola, hold fast cills/steps/coping etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and as directed by Engr-in- charge.

Material and Labour for Steel tubular Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to IS.1161-1979 grade Fe-290 (Gde St.-165 complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed.

M&L for Providing and fixing tiled false ceiling of designer tiles(high pressure steam Cured) of 6 mm thickness (as per IS:14862) of size 595x595mm and approved design (Cascade or Electra or equivalent) in true horizontal level, suspended on inner locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grms, both side inclusive and black painted groove on all T webs) consisting of main “T” runner with suitably spaced joints to get required length and 15x32mm made from 0.3mm thick MS powder coated/GI sheet, 1200mm long spaced between main “T” at 600mm C/C to form a grid of 1200x600mm and secondly cross “T” of length 600mm and size 15x32mm made of 0.30mm thick MS powder coated/GI sheet to be interlocked at middle of 1200x600mm panel to form grids of 600x600mm and wall angle 15x20x0.36mm and laying false ceiling tiles and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main ‘T’ runner to be suspended from ceiling using GI soffit cleats/by using dash fastners to RCC lintel or slabs/by welding MS cleats of suitable size on truss/purlin/rafters” GI adjustable rods of 3mm dia with galvanized butterfly level clips, spaced at 1200mm c/c along main “T”, bottom exposed width of 15mm of all “T” sections shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5 mm width, at all heights as per directions complete all as specified and directed.

Demolition of brick work or stone / boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

Material and labour for brick work built in CM (1:6) straight or curved on plan exceeding 6 metre mean radius using sub class ‘B’ bricks (Old size bricks) complete all as specified and as directed.

all as per item no. 14 but except brick

Taking down cement or cement lime plaster on brick or stone walls etc including racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar (1:6) using coarse sand on fair faces of brick work of concrete surfaces of walls, finished even and smooth (without using extra cement) complete all as specified and directed.

M & L for 15 mm thick rendering on wall/concrete surface in two layer with cement mortar 1:4 finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for rendering 10 mm thick in cement (1:3) on fair faces of concrete as in ceiling, finished even and smooth without using extra cement including taking out cement plaster from ceiling surfaces complete all as specified and directed.

Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed.

M&L applying two coat OBD including primer complete all as specified and directed.

M&L applying two cement Base paint including primer complete all as specified and directed.

M&L for three coat of white wash on New surfaces (wall) including all prereration complete all as specified and directed.

M&L for three coat of white wash on New surfaces ceiling including all prereration complete all as specified & directed.

M&L for preparation of old decorated surfaces (plastered/ un-plastered) of ceiling incl cornices by brooming down with steel brush, scrapping down smoke soot, moulds, moos and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on ceiling complete all as specified and directed.

M&L for preparation of old decorated wall surfaces of existing treatment on walls including cornices by broming down with steel brush, scrapping down smoke soot, moulds moss and efflorescent salts and trading oil and grease spots and applying one coat of cement base paint complete all as specified and directed.

M&L for preparation of old decorated wall surfaces including cornices by broming down with steel brush, scrapping down smoke soot, moulds moss and efflorescent salts and trading oil and grease spots and applying one coat of distemper oil bond emulsion by using rollers complete all as specified and directed.

Taking down old U/S wooden /steel chowkhat with shutter nexc 1.50 sqm each and removing from site complete all as specified and directed.

All as per item No. 28 above but exc 1.5 and nexc 4 sqm

Taking down old U/S shutters of any description exc 1 sqm and n exc 2 Sqm each and removing from site complete all as specified and directed

Taking down shutter from the frame of any discription n exe 2 sqm each and refixing in same opening in same openinig and necessary repair complete all as specified and directed.

M&L for factory made Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, tower bolt complete with glazing bars, dovetailed or welded including soap coat complete all as specified and directed.

M&L for factory made Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, towe bolt complete without gauzed bars, dovetailed or welded including soap coat complete all as specified and directed.

M&L for Steel ventileter with top hung shutters including projecting type hinges with MS handle, and MS peg stay, including tower bolt complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F framed work such as grills gratings, etc with ends of bars shouldered and/ or riveted or forged into spikes, framed guard bars barred iron doors, door chowkat , ladders; framed balusters; walk ways; railings; frame work of water tanks, hold fast, sheet and similar work conforming to Fe-410-0 or Fe 310-0 complete all as specified and directed

M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification of drawing complete all as specified and directed.

M&L for Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification of drawing complete all as specified and directed

S&F factory made 35 mm thick Plain framed, panelled shutter (two or more panel) single or double leaf with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated factory made complete all as specified and directed

S&F factory made 35mm thick 2nd class hard wood glazed and skelton shutter (two or more panel) single or double leaf open rebated and prepared to receive glass gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc, size of members of shutters as specified in SSR Pt-I, section-8, clause 8.24(a) supplied and fitted to chowkats complete all as specified and directed.

S&F Framed work as in doors or gates or chowkhat of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings including of steel sheeting or other covering, running rails and guides and hanging; also fastening and fixing complete all as specified and directed.

S&F PTMT Butt hinges 100 mm complete all as specified and directed.

S&F 150 mm long PTMT tower bolt of complete fixing to door complete all as specified and directed.

S&F 150 mm long PTMT handle bolt of complete fixing to door complete all as specified and directed.

S&F Stainless steel butt hinges 100 mm size, medium weight, having flap size 100 mm X 58 mm X 1.90 mm thick and dia of hinge pin 5.6 mm fixed with 8 nos stainless steel screws as per IS 12817 of 2013 complete all as specified and directed.

S&F 150 mm Stainless steel handles fabricated type bright finish having metal thickness 3 mm complete fixed with 4 nos stainless stell screws complete all as specified and directed.

S&F 200 mm size Stainless steel barrel tower bolt, with width of barrel 33 mm and thickness 0.70 mm having dia of bolt 10 mm as per IS-15833 of 2009 complete all as specified and directed.

S&F 300 mm size Stainless steel sliding door bolt, hasp & staple type with 16 mm dia rod, for use with Pad lock, with and including minimum 06 nuts and bolts, 4 on bolt plate and two on staple plate as per IS-15834 (2008) complete all as specified and directed.

S&F Anodised aluminium door shutters, aluminium section weighing minimum weight 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door 300 mm long, 3 nos hinges 100 mm size mortice lock 3 lever 100 mm size, anodised aluminum snap beading screws including power coating of any color complete all as specified and directed.

S&F anodised aluminium frame for door, windows, with one or more rebates including joininig cleat for fixing including powder coating of surface complete all as specified and directed

S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m (minium wt) including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no) hinges type B-21 100mm long (2 no) suitable handle (1 no) 2 nos tower bolt in each shutter including powder coated complete all as specified and directed

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, DG-902 all complete as per requirement and direction of Engineer-in-charge.

S&F in repairs 100 mm size mortic lock with 4 lever aluminium anodised body fixed to aluminium door complete all as specified and directed

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and as directed.

S&F in reapirs aluminium extruded section Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all fitting and fixer complete all as specified and directed.

S&F in repair mild steel stove enamalled black 300 mm,size ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed

M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with beads in square in each pane complete all as specified and directed.

M&L for 5mm thick sheet glass ordinary quality and glazing with oil putty or fixed with beads in square each pane complete all as specified and directed.

Fixing only any thick sheet glass ordinary quality and glazing with oil putty or fixed with beads in square n.exc. 0.5 sqm in each pane complete all as specified and directed.

Hacking out old broken galss (any thickness, size, quality or description) from wooden/metal frames or stone concrete or brick surfaces, glazed with putty or fixed with beads complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplesor MS beads size 2mm to 3mm complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplesor MS beds size 2 mm to 3 mm size complete all as specified and directed.

M&L Preparing New steel surface of any description over 10 cm width girth not otherwise describe and applying two coat of synthethic enamel paint over a coat of red oxide complete all as specified and directed.

M&L for applying two coat of synthetic enamel paint In new surface over a coat of pink primer on wooden surface exceeding 10 cm in width or girth including preparation of surfaces and including necessary sacffolding complete all as specified and directed.

Demolition of concrete of any description in any position all as directed by Engineer-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and as directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc all as specified and as directed.

M&L for 75mm thick cement concrete (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in flooring, path, plinth protection and the like, laid in alternate bays n.exc 2.50 Sqm and joints filled with mastic filling including finishing even and smooth without using extra cement complete all as specified and directed.

M&L coloured non skid tile 7 to 8mm thick (square/ rectangular) area of each tiles exc.o.06 sqm n exc.,0.18 sqm in floor etc. set and jointed with neat cement slurry and pointed in colur cement to match including 15 mm thick screed bed in cm 1:6 complete all as specified and directed.

M&L glazed ceramic tiles 450x350x/6/7/350x250x7/300x200x7mm thick coloured tiles on walls such as skirting and dado and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick in cm (1:4) backing coat complete all as specified and directed.

M&L coloured non skid tile7 to 8mm thick (square/ rectangular) area of each tiles exc.0.18 sqm n exc. 0.42 sqm in floor etc. set and jointed with neat cement slurry and pointed in colur cement to match including 15 mm thick screed bed in cm 1:6 complete all as specified and directed.

M&L coloured non skid tile7 to 8mm thick (square/ rectangular) area of each tiles exc. 0.18 sqm n exc. 0.42 sqm in vertical surface/ suck as skirting and dado etc. set and jointed with neat cement slurry and pointed in colur cement to match including 10 mm thick back plaster in cm 1:6 complete all as specified and directed.

M&L for 18 to 20mm thick marble stone as in platforms / counter slab/flooring and laid in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade & round the edge complete all as specified and directed.

M&L machine cut kota stone slab flooring 18-20 mm thick over cement screed base 20mm thik screed bed in bedding layer in cm 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the the slab including grinding, rubbing and polishing , complete all as specified and directed.

M&L machine cut kota stone slab 18-20mm thick in risere of step, skirting, dado and piller over cement screed base 10 mm thik 1:6 cm laid and jointed with grey cement slurry mixed with pigment to match the shadeof the the slab including grinding, rubbing and polishing complete all as specified and directed.

M&L PCC (1:4:8) type D-2 (40mm crushed stone aggt) as in foundation, flooring sub base, mass concrete complete all as specified and directed.

M&L 25 mm thick PCC (1:2:4) Type B-1 20 mm stone aggt as in sub floor /roof/chajja complete all as specified and directed.

S&F in repair for 500 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) ISI Mark hoisted and fixed in position including all fitting nipple, float valve & Ball of 25 mm complete all as specified in SSR Pt-I.

S&F in repair for 1000 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) ISI Mark hoisted and fixed in position including all fitting nipple, float valve & Ball of 25 mm complete all as specified in SSR Pt-I.

S&F in repair for 5000 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) ISI Mark hoisted and fixed in position including all fitting nipple, float valve & Ball of 25 mm complete all as specified in SSR Pt-I.

Cutting holes in brick walls (exc half brick but n. exc one brick) in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete (1:2:4) Type B-1 as required all as specified and as directed.

S&F 5 mm thick solid PVC sheet wall lining any pattern, colour, plain, wood grained consisting of inclusive of solvent cement and fixing at site on complete all as specified and directed.

S&F 5 mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing

S&F in repairs, 25 mm dia stainless steel fancy type curtain rod in suitable size with and including stainless steel fancy type brackets, stops of matching colour and necessary curtain rings, side caps etc complete all as specified and directed. Note: The quoted rate is deemed to be included for 01 pair of brackets for length of door/window/opening.

VINAYAK CONSTRUCTION COMPANY (BID ID -3176850)

SMG Construction (BID ID -3175003)

AMARJEET SINGH AND CO. (BID ID -3181350)

Alankar Traders (BID ID -3175812)

AMAR NATH SHARMA (BID ID -3181772)

IRFANAHMAD CONTRACTOR (BID ID -3171625)