Repair or Replacement to Security lights or street lights and Connected items at Dholewal , CG Complex and Doraha Under GE Ludhiana

Amount

Excavation in trenches in any type of soil not exceeding 1.5 mtr wide and not exceeding 1.5 metre in depth for laying of LT under ground cable complete all as specified and directed by Engr-in-Charge.

All as per item No. 1 above but for each addl 1.5 m.

Returning, filling in, any type of soil and spreading, in layers not exceeding 25 cm thick complete all as specified and directed by Engr - in - Charge.

Removal of surplus soil (any type of soil obtained from excavation) to a distance not exceeding 50 metre and depositing where directed at level not exceeding 1.5m above the starting point complete all as specified and directed by Engr - in - Charge.

Supplying and laying bricks common brunt clay building bricks sub class B incl removing of old bricks complete all as specified and directed by Engr - in - Charge.

M & L sand cushioning for under ground cable 23 cm thick (one layer of 8cm thickness before laying the cable and other layer of 15cm thickness after laying the cable) all as specified and directed by Engineer-in-Charge. Note: Thickness of 18 cm after punning shall be considered for payment.

M & L for PCC (1:4:8) type D-2 using 40 mm graded stone aggregate in foundation of electric poles, struts PCC blocks including necessary form work and fair finish to exposed surfaces without using extra cement etc, complete all as specified and directed by Engr - in - Charge.

M & L for PCC (1:3:6) type C-2 using 40 mm graded stone aggregate in the foundation of electric poles,stay assembly and struts PCC blocks including necessary form work and fair finish to exposed surfaces without using extra cement etc, complete all as specified and directed by Engr - in - Charge.

All as per srl No Item No- 8 here-in-before but PCC (1:2:4) type B-1 using 20mm graded stone aggregate for coping of poles complete all as specified and directed by Engr - in - Charge.

Supply and erecting pre-stressed cement concrete pole, 9 metre long of cross section 102mm x 172mm at top and 102mm x 279mm at bottom, class 10, complying with requirements of IS-1678-1978 including disconnecting and reconnecting ACSR conductor, painting of poles with two coats of synthetic enamel paint over a coat of primer with black and white strips 30cm each up to 1.5 metre height from top of PCC foundation block and numbering of poles with synthetic enamel paint white in 80mm high letters over 150mm x 230mm yellow base complete all as specified and directed by Engr - in - Charge. (PCC for foundation and earth work shall be measured and paid for separately).

Taking down existing street light fittings of any type/ size/ capacity fixed in any position i.e. on wall/ pole/ watch tower, refixing the fitting in its original position after repairs complete all as specified and directed by Engineer- in-Charge. (Note:-Spares shall be measured and paid seprately.)

Supply and fixing in replacement of LED street light fitting 25 watt power factor 0.95 (minimum) epoxy powder coated pressure die-cast aluminium housing of standard size, heat resistant toughened clear glass/transperent polycarbonate sheet, BIS markedelectronic driver of approved brand only in housing having protection against over voltage, short circuit and open circuit and surge protection against lightening with IP-66 or above complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of LED street light fitting 45 watt power factor 0.95 (minimum) epoxy powder coated pressure die-cast aluminium housing of standard size, heat resistant toughened clear glass/transperent polycarbonate sheet, BIS markedelectronic driver of approved brand only in housing having protection against over voltage, short circuit and open circuit and surge protection against lightening with IP-66 or above complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of LED street light fitting 60 watt power factor 0.95 (minimum) epoxy powder coated pressure die-cast aluminium housing of standard size, heat resistant toughened clear glass/transperent polycarbonate sheet, BIS markedelectronic driver of approved brand only in housing having protection against over voltage, short circuit and open circuit and surge protection against lightening with IP-66 or above complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of LED street light fitting 90 watt power factor 0.95 (minimum) epoxy powder coated pressure die-cast aluminium housing of standard size, heat resistant toughened clear glass/transperent polycarbonate sheet, BIS markedelectronic driver of approved brand only in housing having protection against over voltage, short circuit and open circuit and surge protection against lightening with IP-66 or above complete all as specified and directed by Engr-in-Charge.Note for Srl No. 12 to 15 :- Make: Crompton/Polycab/Philips/Wipro/Havells

Supply and fixing in replacement of GI pipe medium grade 40mm dia 1.2 mtr long bend to shape as required and fixing with two nos MS clamp of size 40x6mm for fixing of street light fitting complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of 1100 volt grade heavy duty single core cable PVC insulated PVC sheathed with stranded copper conductor wire FRLS of size 3 x 2.5 Sqmm for connection purpose, ISI marked drawing through 20mm dia PVC pipe / conduit complete all as specified and directed by the Engr-in-Charge.

Supply and laying in replacement of XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 volts grade with stranded alumimium conductor of size 16 Sqmm 4 core complete all as specified and directed by Engr-in-Charge.

Supply and laying in replacement of XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 volts grade with stranded alumimium conductor of size 25 Sqmm 4 core complete all as specified and directed by Engr-in-Charge. Note Srl Item No.17 to 19 Make: Havells/ KEI/Polycab/CCI.

Supply and fixing in replacement of driver suitable for any type of street light 20W/30W/45 watt complete all as specified and directed by Engineer- in-Charge.

Supply and fixing in replacement of driver suitable for any type of street light 60watt/90W complete all as specified and directed by Engineer- in-Charge.

Supply and fixing in replacement of Surge protection device suitable for any type of street light 20W-45W complete all as specified and directed by Engineer- in-Charge.

Supply and fixing in replacement of Surge protection device suitable for any type of street light 60W/90W complete all as specified and directed by Engineer- in-Charge.

Supply and fixing in replacement of junction box made out of fiber plastic comprising of 04 Nos bus bar of 32 Amp with including MCB 6 Amp rating complete complete all as specified and directed by Engr-in-Charge. Make :- sintex/hensal

Supply and fixing in replacement of MCCB 63 Amps, 4 pole, with adjustable thermal adjustable magnetic release, 415 volts, 50 HZ, 16 KA complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of MCCB 100 Amps, 4 pole, with adjustable thermal adjustable magnetic release, 415 volts, 50 HZ, 25 KA complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of MCB SP 6 TO 32 Amps, 10 KA, C-curve complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of galvanised pipe light grade of ISI marked 40 mm bore for passing of cable fixed to poles/walls/lay under floor complete with and including fittings as required complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of Automatic Street Light Switch using Nature switch for automatic switching of street lights based on LUX level of Natural light. The Infrared Sensor based Nature Switch along of capacity of 5 KW, three phase, with suitable Power Contactor(AC 3) 20-32 Amps and MCBs SP (Input-Output) 32 Amps on each phase at incoming and out going connections fully enclosed in pole/wall mountable enclosure, weather and vermin proof having front hinged shutter, rust proof, termite proof and FR grade SMC junction box having to IP 54 protection, pre-wired complete with suitable wire PVC insulated FRLS type copper conductor with suitable copper thimbles/lugs etc complete all as specified and directed by Engr-in-Charge. Make of Nature Switch : Kakatiya Energy Systems Pvt Ltd Hyderabad/ Bajaj/Healer. Make of Contactor : BCH/L&T/Schneider. Make of MCB : Hager/Schneider/L&T/BCH. Make of copper wire : Finolex/Polycab/RR Kable. Make of junction box : Sintex/Schneider/Rittal

Supply and fixing in replacement to LED Flood light 120 watt with SPD, PF not less or equal 0.9 orion series complete all as specified and directed by Engineer in charge Make:- Havells/Crompton/Phillips

Supply and fixing in replacement LED security light fitting LED 30 watt with SPD, PF not less or equal 0.9 epoxy coated cover sheet aluminium housing with heat resistant toughtened glass & IP 66 protection complete all as specified and directed and directed by Engineer-in-Charge. Make: Crompton/Havells/Philips

Supply and fixing to replacement of post top lantern including 1 x 25 Watt LED with SPD, PF not less or equal 0.9, complete all as specified and directed by Engr in Charge Make:- Havells/ Crompton/Philips

Supplying, laying, jointing and testing XLPE insulated heavy duty multi stranded armoured and PVC sheathed LT cable 1100 volts grade with aluminium conductor cross sectional area 10 sqmm 4 core laid in trenches/ ducts/ along poles/ through pipes including taking out existing cable complete all as specified & directed by Engineer-in- charge. Make:- Havells/KEI/polycab/CCI

S&F to replacement of microRex analog digital timer T31 daily swithces in accordance with IEC 60730-1 and 60730-2-7 switching ON/automatic/OFF hourly/daily/weekly switching dial with capacity segments clock prescision +/-5min for the daily time switch -10C to +55C operating temp incl suitable contactor 20Amps complete accessory all as specified and directed by engr in charge Make:- Havells/Legrand /Scheinder/ABB

PREM CONSTRUCTION COMPANY

UNITED ENGINEERING CORPORATION

R D Bansal

shri ram enterprises

R K ENTERPRISES

JASSI TRADERS