Providing installation and commissioning of split_window type air conditioning system as and when urgently required in essential areas of New Secretariat Building and New Assembly Building for 1year period

Amount

Providing star rated (Minimum 3 star with applicable ISEER according to current industry standard) high wall split /window type AC machine (Condenser & evaporator coil pipe should be made of copper) of approved make and technical specification with hermetically sealed compressor operating on non CFC refrigerant, pipe as supplied with AC machine, necessary plug top for IDU (With minimum 01(one)year warranty) suitable for wall mounting conforming to IS 1391(Part-II) specification (Except power consumption) suitable for operation on 230 volt, 50 Hz, single phase AC supply capable of performing a) Cooling b) Dehumidifying c) Air circulating d) Filtering having rated cooling capacity

1.0 TR split type high wall AC machine (rated cooling capacity should not be less than 3000 Kcal/hr or 12000 BThu/hr or 3500 watt)

1.5 TR split type high wall AC machine (rated cooling capacity should not be less than 4500 Kcal/hr or 18000 BThu/hr or 5250 watt)

2.0 TR split type high wall AC machine (rated cooling capacity should not be less than 6000 Kcal/hr or 24000 BThu/hr or 7000 watt)

1.5 TR window type AC machine (rated cooling capacity should not be less than 4500cal/hr or 18000 Thu/hr or 5250 watt)

Providing star rated (with applicable ISEER according to current industry standard) high wall/ ceiling mounting split type AC machine (Condenser & evaporator coil pipe should be made of copper) of approved make and technical specification with hermetically sealed compressor operating on non CFC refrigerant, pipe as supplied with AC machine, necessary plug top for IDU (With minimum 01(one)year warranty) suitable for wall mounting conforming to IS 1391 (Part-II) specification (Except power consumption) suitable for operation on 420 volt, 50 Hz, three phase AC supply capable of performing a) Cooling b) Dehumidifying c) Air circulating d) Filtering having rated cooling capacity

2.5 TR split type high wall AC machine ( Minimum 2 star, rated cooling capacity should not be less than 7500 Kcal/hr or 30000 BThu/hr or 8750 watt)

3.0 TR split type high wall AC machine (rated cooling capacity should not be less than 9000 Kcal/hr or 36000 BThu/hr or 10500 watt)

Providing star rated (Minimum 3 star with applicable ISEER according to current industry standard) ceiling mounting cassette / floor mounting vertical split type AC machine (Condenser & evaporator coil pipe should be made of copper) of approved make and technical specification with hermetically sealed compressor operating on non CFC refrigerant, pipe as supplied with AC machine, necessary plug top for IDU (With minimum 01(one)year warranty) suitable for wall/ceiling mounting conforming to IS 1391(Part-II) specification (Except power consumption) suitable for operation on 420 volt, 50 Hz, three phase AC supply capable of performing a) Cooling b) Dehumidifying c) Air circulating d) Filtering having rated cooling capacity

3.0 TR ceiling mounting cassette type split AC machine (rated cooling capacity should not be less than 9000 Kcal/hr or 36000 BThu/hr or 10500 watt)

4.0 TR ceiling mounting cassette type split AC machine (rated cooling capacity should not be less than 12000 Kcal/hr or 48000 BThu/hr or 14000 watt)

3.0 TR floor mounting vertical type split AC machine (rated cooling capacity should not be less than 10500 Kcal/hr or 42000 BThu/hr or 10500 watt)

4.0 TR floor mounting vertical type split AC machine (rated cooling capacity should not be less than 12000 Kcal/hr or 48000 BThu/hr or 14000 watt)

Standard installation, testing and commissioning of 1.0/1.5/2.0 TR split and window type machine including hole cutting, finishing etc as per direction of the Engineer-in-charge.

Standard installation, testing and commissioning of 2.5/3.0/4.0 TR high wall and ceiling mounting cassette type split machine including hole cutting, finishing etc as per direction of the Engineer-in-charge.

Standard installation, testing and commissioning of 3.0/4.0 TR floor mounting vertical split type AC machine including hole cutting, finishing etc as per direction of the Engineer-in-charge.

Fabrication of M.S platform for placement of condensing unit by using M.S angle of (65x65x5) or (50x50x5) mm size base plate, nuts and bolts/ universal bracket (GSS) for ODU of split type ACs including all accessories for onsite installation i/c painting, fitting, fixing, grouting by cement mixture as per direction of the Engineer-in-charge.

Providing installation of additional length of copper pipe beyond 10 ft length of appropriate size as suitable for 1.0/1.5/2.0 as per manufacturer guideline (5/8” and 1/4” diameter or appropriate size as per manufacturer standerd) for both suction and liquid line with insulation and necessary wiring between indoor and outdoor units.

Providing installation of additional length of copper pipe of appropriate size as suitable for 2.5/3.0/4.0 as per manufacturer guideline ( 5/8” and 3/8’’ diameter or appropriate size as per manufacturer standerd) for both suction and liquid line with insulation and necessary wiring between indoor and outdoor units.

Providing hard PVC pipe of best quality of 25 mm diameter including necessary clamping and fitting for draining of condensate water from indoor unit as per direction of the Engineer-in-charge.

STANDARD ELECTRONICS