GENERAL-Odayikkal RCB-Painting of 12 Nos of shutters, Hoisting bridge and accessories and Replacement of damaged rubber seals, Gate level indicating scale of Odayikkal regulator-General Mechanical Work

PAINTING of REGULATOR SHUTTERS and HOISTING BRIDGE , SUPPLY and FABRICATION of LADDER on SHUTTER and REPLACING of DAMAGED GATE LEVEL INDICATING SCALE

OD41942/2025-2026:Providing with Temporary Platform (Suspended type) of size 6m X 2.5m, with scaffolding pipe suspension from overhead structure, for the repair works/painting of shutters, hoisting bridges, etc. including the cost of bracing, fittings, handling charges, assembling, dismantling and all safety arrangements complete.

OD39249/2025-2026:Overcoat painting the regulator gates and embedded parts with two coats of epoxy coal tar black paint conforming to IS: 14948 with a minimum film thickness of 150+/- 5 microns per each coat, after cleaning the surface using high pressure water jet including cost of materials, labour charges, cost of testing all painting materials, incidental charges, hire of T&P etc. complete as per the direction of Departmental officers at site.

85.114:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

85.115:Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

OD41608/2025-2026:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges(#)

OD39529/2025-2026:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges.(#)

OD40843/2025-2026:Fabrication and supply of Structural steel canal shutters ( Up to 2 tonne weight ) /Hoisting Bridge /Platform and accessories etc. for the same as per approved specifications, drawings and directions of deptl fficer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

OD40845/2025-2026:Erection of the canal shutter ( up to 2 tonne weight) /hoisting bridge / platform including handrails , ladder etc. for the same including alignment correcting and setting complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied-(CANAL GATE 3-16)

OD41273/2025-2026:Chipping , cutting and removing the bolt and nuts, dismantling, taking out and stacking the old rubber seals from the gates without damaging the gate components including cost of all labour, tools and accessories conveyance charges etc. complete.

85.116:Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing

85.118:Supplying and fixing in correct position with specified initial interface L-type / bulb nose rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

OD54568/2025-2026:Supply of SS BOLT and NUT up to 300mm Length including cost of conveyance.(#)

OD54559/2025-2026:DRILLING (up to depth of 200mm for MS/SS/TMT rod dia. 8mm to 25mm) and FASTENING with MS/SS/TMT rod in concrete/Stone including conveyance and labor charges complete. [excluding cost of materials already supplied.](#)

OD54603/2025-2026:Preventive maintenance of the hoisting mechanisms of shutters for making them in easy operational condition, Top up gear oil in reduction gear boxes, Cleaning and greasing gear wheels, Plummer blocks and pulley pin in the hoisting mechanisms and shutters ,checking pulleys ,replacing damaged bolts and nuts, applying cardium compound on wire ropes including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete as per the directions of departmental officers at site.