Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.4 LAccepted-AOC KAMALA BIHAR BAGHUABOL PO HATATOTA TALCHER DIST ANGUL ODISHA PIN 759100 | ANUGUL | ODISHA | 759100 | L1 | Accepted-AOC As per TC recommendations. | |
| 2 | L2₹8.9 L+₹14,518.75 (1.65%)Rejected-Finance FLAT NO LIG 90 M P NAGAR KORBA CHHATTISGARH | KORBA | CHHATTISGARH | 495677 | L2 | Rejected-Finance As per TC recommendations. | |
| 3 | L3₹9.0 L+₹20,200 (2.30%)Rejected-Finance | L3 | Rejected-Finance As per TC recommendations. | |
| 4 | L4₹9.1 L+₹30,199 (3.44%)Rejected-Finance AT BAGHUABOL WARD NO 18 PO HATATOTA TALCHER DIST ANGUL PIN 759100 | ANUGUL | ODISHA | 759100 | L4 | Rejected-Finance As per TC recommendations. | |
| 5 | L5₹9.9 L+₹1.1 L (13.1%)Rejected-Finance | L5 | Rejected-Finance As per TC recommendations. |
| Sl No | Description | Qty | Unit | RAMAKANTA LENKA L3 | A A ZILKAR L2 | M/S. R.K. ELECTRICAL L4 | DURGA ELECTRICALSAND ELECTRONICS L5 | M/s. Sahida Electrical Works L1 | M/S GOODWILL ENTERPRISES L6 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Supply, installation, testing and commissioning of LT Panel, suitable for 415V, 3 Phase, 4 Wire 50 Hz AC supply system having fabricated in compartmentalized design from CRCA Sheet Steel Or equivalent material of minimum 2 mm thick for frame work and covers, minimum 3 mm thick for gland, plates i.e cleaning and finishing complete with suitable power coating in approved shade, having 800 Amp capacity extensible type TPN Copper Busbars of High conductivity, DMS/SMC Busbar supports, bottom base channel of MS section not less than 100 mm X 50 mm X 5 mm thick, fabrication shall be done in transportable section, entire panel shall have a common Copper earth bar of size 25 mm X 5 mm at the rear with 2 Nos, Earth Stud, solid connections from main Bus bar to Switchgears with required size of Copper Busbar and control wiring suitable PVC insulated copper conductor providing following switchgears.
INCOMER:
01) 800 Amps 4 Pole, 50 XA MCCB, with SP Link and Micro Processor based release (Ics =Icu) o1 No
OUTGOINGS
1) 400 Amps. 50 KA, 4 Pole MCCB with SP Link and Micro Processor based release (Ics =Icu)... o3 Nos.
2) 400 Amps, 3 Phase, Change Over Switch... o1 Nos.
CONTROL SYSTEM
1) Digital Ammeter - 4 Nos, Digital Voltmeter - 04 Nos, Indication Lamp 230 Volts (RYB) - 12 Nos, Current Transformers 800/5 Amps, 400/5 Amps 12 Nos Control Fuse Base and Carrier 16 Amps - 12 Nos, Cable gland with Clamp...04 Sets and Insulators, Copper Flats, Wiring Materials etc
PANEL SIZE
Height - 1800 mm, Width - 2000 mm, Depth - 450 mm,
MS Sheet thickness - 2 mm | 1 | SET | 3,30,000 ₹3,30,000 Lowest | 3,31,250 ₹3,31,250 | 3,69,900 ₹3,69,900 | 3,80,381 ₹3,80,381 | 3,30,000 ₹3,30,000 Lowest | 4,37,400 ₹4,37,400 |
| 2.00 | Supply, instationation, testing and commissioning of LT Panel, suitable for
415 V, 3 Phase, 4 Wire 50 Hz AC supply system having fabricated in compartmentalized design from CRCA Sheet Steel Or equivalent material of minimum 2 mm thick for frame work and covers, minimum 3 mm thick for gland, plates i.e cleaning and finishing compete with suitable power coating in approved shade, having 800 Amp capacity extensible type TPN Copper Busbars of High conductivity, DMS/SMC Busbar supports, bottom base channel of MS section not less than 100 mm X 50 mm X 5 mm thick, fabrication shall be done in transportable section, entire panel shall have a common Copper earth bar of size 25 mm X 5 mm at the rear with 2 Nos, Earth Stud, solid connections from main Busbar to Switchgears with required size of Copper Busbar and control wiring suitable PVC insulated copper conductor providing following switchgears.
INCOMER:
01) 800 Amps 4 Pole, 50 KA MCCB, with SP Link and Micro Processor based release (Ies =Icu) o1 No
OUTGOINGS
1) 400 Amps, 50 KA, 4 Pole MCCB with SP Link and Micro Processor based release (Ics =Icu)... 04 NOs.
2) 250 Amps, 36 KA, 4 Pole MCCB with SP Link and Micro Processor based release (Ics =Icu)... 04 NOs.
CONTROL SYSTEM
1) Digital Ammeter - 9 Nos, Digital Voltmeter - 09 Nos, Indication Lamp 230
Volts (RYB) - 27 Nos, Current Transformers 800/5 Amps, 400/5 Amps, 250/5 Amps, 5VA, CL-1 - 27 :Nos, Control Fuse Base and Carrier 16 Amps - 27 Nos,
PANEL SIZE
Height - 1900 mm, Width - 2200 mm, Depth - 450 mm,
MS Sheet thickness - 2 mm | 1 | SET | 5,60,000 ₹5,60,000 | 5,53,125 ₹5,53,125 | 5,30,000 ₹5,30,000 Lowest | 6,03,164 ₹6,03,164 | 5,40,000 ₹5,40,000 | 6,21,000 ₹6,21,000 |
| 3.00 | Total impact of GST plus Labour Cess [@ 1 % (BOCW Cess to be deducted from the RA bill as per the value of the work progress)] for the purpose of CTC | 1 | Nos | 8,900 ₹8,900 | 8,843.75 ₹8,843.75 | 8,999 ₹8,999 | 9,835.45 ₹9,835.45 | 8,700 ₹8,700 Lowest | 10,584 ₹10,584 |
Tender Value
₹16.8 L
EMD Value
₹21,100
Closing Date
15 Dec 2025, 5:00 pmClosed
PE E and M
Office of the project officer Kulda OCP
Providing and fixing of customized L.T control panel to control different L.T circuits at Laikera Siding and KOCP, Basundhara Area.
2025_MCL_348704_1
MCL/PO/ KOCP/EM/e-Proc/2025-26/18
Open Tender
Electrical and Maintenance Works
Item Rate
60 days
Kulda OCP
Please refer Tender documents.
4 documents required · 4 mandatory
₹21,100
11 Feb 2026
3 Dec 2025
16 Dec 2025
3 Dec 2025
15 Dec 2025
4 Dec 2025
3 Dec 2025 - 7 Dec 2025
Supply, installation, testing and commissioning of LT Panel, suitable for 415V, 3 Phase, 4 Wire 50 Hz AC supply system having fabricated in compartmentalized design from CRCA Sheet Steel Or equivalent material of minimum 2 mm thick for frame work and covers, minimum 3 mm thick for gland, plates i.e cleaning and finishing complete with suitable power coating in approved shade, having 800 Amp capacity extensible type TPN Copper Busbars of High conductivity, DMS/SMC Busbar supports, bottom base channel of MS section not less than 100 mm X 50 mm X 5 mm thick, fabrication shall be done in transportable section, entire panel shall have a common Copper earth bar of size 25 mm X 5 mm at the rear with 2 Nos, Earth Stud, solid connections from main Bus bar to Switchgears with required size of Copper Busbar and control wiring suitable PVC insulated copper conductor providing following switchgears. INCOMER: 01) 800 Amps 4 Pole, 50 XA MCCB, with SP Link and Micro Processor based release (Ics =Icu) o1 No OUTGOINGS 1) 400 Amps. 50 KA, 4 Pole MCCB with SP Link and Micro Processor based release (Ics =Icu)... o3 Nos. 2) 400 Amps, 3 Phase, Change Over Switch... o1 Nos. CONTROL SYSTEM 1) Digital Ammeter - 4 Nos, Digital Voltmeter - 04 Nos, Indication Lamp 230 Volts (RYB) - 12 Nos, Current Transformers 800/5 Amps, 400/5 Amps 12 Nos Control Fuse Base and Carrier 16 Amps - 12 Nos, Cable gland with Clamp...04 Sets and Insulators, Copper Flats, Wiring Materials etc PANEL SIZE Height - 1800 mm, Width - 2000 mm, Depth - 450 mm, MS Sheet thickness - 2 mm
Supply, instationation, testing and commissioning of LT Panel, suitable for 415 V, 3 Phase, 4 Wire 50 Hz AC supply system having fabricated in compartmentalized design from CRCA Sheet Steel Or equivalent material of minimum 2 mm thick for frame work and covers, minimum 3 mm thick for gland, plates i.e cleaning and finishing compete with suitable power coating in approved shade, having 800 Amp capacity extensible type TPN Copper Busbars of High conductivity, DMS/SMC Busbar supports, bottom base channel of MS section not less than 100 mm X 50 mm X 5 mm thick, fabrication shall be done in transportable section, entire panel shall have a common Copper earth bar of size 25 mm X 5 mm at the rear with 2 Nos, Earth Stud, solid connections from main Busbar to Switchgears with required size of Copper Busbar and control wiring suitable PVC insulated copper conductor providing following switchgears. INCOMER: 01) 800 Amps 4 Pole, 50 KA MCCB, with SP Link and Micro Processor based release (Ies =Icu) o1 No OUTGOINGS 1) 400 Amps, 50 KA, 4 Pole MCCB with SP Link and Micro Processor based release (Ics =Icu)... 04 NOs. 2) 250 Amps, 36 KA, 4 Pole MCCB with SP Link and Micro Processor based release (Ics =Icu)... 04 NOs. CONTROL SYSTEM 1) Digital Ammeter - 9 Nos, Digital Voltmeter - 09 Nos, Indication Lamp 230 Volts (RYB) - 27 Nos, Current Transformers 800/5 Amps, 400/5 Amps, 250/5 Amps, 5VA, CL-1 - 27 :Nos, Control Fuse Base and Carrier 16 Amps - 27 Nos, PANEL SIZE Height - 1900 mm, Width - 2200 mm, Depth - 450 mm, MS Sheet thickness - 2 mm
Total impact of GST plus Labour Cess [@ 1 % (BOCW Cess to be deducted from the RA bill as per the value of the work progress)] for the purpose of CTC
stage.html
html • 0.05 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.86 MB
Tendernotice_2.pdf
PDF • 1.48 MB
BOQ_361444.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .