Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.0 LAccepted-AOC | L1 | Accepted-AOC Accept | |
| 2 | L2₹32.0 L+₹98,545.20 (3.18%)Rejected-AOC | L2 | Rejected-AOC Rejected | |
| 3 | L3₹32.8 L+₹1.8 L (5.78%)Rejected-AOC INDEX NO B 48 HQ CE SWC JAIPUR A 202 RATHRAM PANORAMA GALA GIMAKHANA ROAD NEAR AMMANJARI BUNGLOWS SOUTH BOPAL AHMEDABAD 380058 | AHMEDABAD | AHMEDABAD | GUJARAT | 380058 | L3 | Rejected-AOC Rejected |
Tender Value
₹31 L
EMD Value
₹62,000
Closing Date
20 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sh K A Vardhan, IDSE
Office of the GE (Army) Camp Hanuman, Ahmedabad - 380 004
PROVN OF 3 SINGLE JCOs ACCN TOILET BATHROOM AT ZONE B AHMEDABAD
2023_MES_583059_1
8295/E8
Open Tender
Civil Works
Works
240 days
GE (Army) Ahmedabad
AS PER NIT
8 documents required · 8 mandatory
₹500
GE (Army) Ahmedabad
₹62,000
Yes
30 Mar 2023
25 Feb 2023
22 Mar 2023
25 Feb 2023
20 Mar 2023
4 Mar 2023
25 Feb 2023 - 4 Mar 2023
Amount
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out In soft/loose soil
M&L for Site Clearance of soft / loose soil, watering and removing surplus soil to a distance n exc 50m and making good surface, leveling the area & cleaning etc complete.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in Soft/Loose Soil Complete.
Excavating in trenches, n exc 1.5 m wide and exc 1.5 m but not exc. 3.0 in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in Soft/Loose Soil Complete
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft to loose soil Complete.
Excavation in post hole for similar holes each nexc 0.50Cum getting out returning filling in and ramming earth around in layers nexc 25 cm watering and removed surplus soil to a distance nexc 50m and making good surface in soft/loose soil Complete.
Sand filling under floors or in foundations including watering and consolidation all as specified.
Removing excavated soil not exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point Complete
Removing excavation material exe. 250m but n exc. 500m & deposited where directed at a level n exc. 1.5m above the starting point Complete
M&L for hardcore of guage n. exc 63mm, deposited, spread & leveled in layers n exc. 15 cm thick, watered & rammed to a true surface Complete
M&L for Hardcore of guage exc 63mm but n exc. 100 mm (Broken stone and boulders) , deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface Complete
M&L for Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) Complete
M&L for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface Complete
M&L for Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall Complete
M&L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area Complete
M&L for PCC 1:3:6 type C0 (using 12.5 mm graded aggrigate filling in Pressed steel door frame and for fixing hold fast Complete
M&L for PCC (1:4:8) type D2 using 40 mm graded aggregate for as in foundation, filling and mass concrete Complete
M&L for Cement concrete 1:3:6 Type C2 using 40 mm graded aggregate in foundations, filling and mass concrete complete.
M&L for PCC 1:2:4 type B2 using 40 mm graded stone aggregate as in surface channels, benching for manholes complete.
M&L for PCC 1:3:6 type B1 using 20 mm graded agg as in copping incl. necessary form work & finishing exposed surface of concrete complete
M&L for Providing precast cement concrete type B1, 1:2:4 in window or door cills, lintels,kerb stone bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin), corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar with joints to matchin CM 1:4 complete
M&L for Precast cement concrte type B1, 1:2:4 using 20mm graded stone agg set in CM (1:6) in cover slabs for manhole and similar articles etc. complete.
M&L for Extra for forming fair finished drains or channels 30 cm inner girth in cement concrete using extra cement including forms, moulds materials/stoppage and complete all as specified
M&L for RCC M-25 (Design Mix) using 20mm graded aggregate Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete Complete
M&L for RCC M-25 (Design Mix) using 20mm graded aggregate for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like Complete
M&L for RCC M-25 (Design Mix) using 20mm graded aggregate for Chajja Complete
M&L for RCC M-25 (Design Mix) using 20mm graded aggregate for Beams, cantilevers, bressummers, lintels over 1.5m span Complete
M&L for RCC M-25 (Design Mix) using 20mm graded aggregate for Columns, pillars, piers, posts and struts Complete
Supply only water proofing compound Complete
M&L for brick work with sub class 'B' bricks built in CM (1:6) straight or curved on plan & exc 6 m mean radius with old size bricks Complete.
M&L For Brickwork with old size fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 Complete
M&L for Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 Complete
M&L for Form work for rough finished surfaces of concrete measured flat for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete Complete
M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished surfaces of concrete measured flat Complete
M&L for Formwork to chullah hoods, chajjas, troughs and similar items including edges for rough finished surfaces of concrete measured flat Complete
M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. for rough finished surfaces of concrete measured flat Complete
M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces of concrete measured flat Complete
S&F for factory made 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides Complete
S&F for 35 mm Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into square, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats Complete
S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing Complete
S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing Complete.
S&F for 200 mm long Aluminium anodised barrel tower bolts Complete.
M&L for sliding door bolt of 300mm long plate Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed Complete
S&F for MS Butt Hinges HW of 100 mm long Complete
S&F for 300 mm ordinary mild steel rat tail rod pattern spring incl roller and roller plate complete
S&F for 150 mm size aluminium anodised door handles Complete.
S&F for 25 mm dia drapery rod fancy powder coated fixed to wall with bracket & knobs complete.
S&F for Towel rail brass chromium plated 60 cm long Complete
S&F for Floor door stoper AL alloy 150mm long Complete
S&F for Wire netting of size 12mm of stainless steel wire 1.4mm dia fixed with tinned tacks of stainless steel wire staples Complete
S&F for MS work as in fencing post, blausters etc, angle iron, flat iron, flat iron round or square bars including all necessary cutting, drilling holes in flat iron, bolting etc for screwing chain link fencing complete.
S&F for of mild steel work such as window guard bars and similar work conForming to Fe – 290 Grade – E 165 complete.
S&F for screw bolts (machine made) with hexagonal or square head at one head and rounded the other or screwed both end each screwed end to be fitted with washers and one hexagonal or square nut exc 10cm nexc 15cm long dia of shank 11 to 15mm complete.
S&F for TMT bars Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Complete .
Supply only mild steel round bars of 10 mm dia as in line wire cut lengths, Hooking ends etc conforming to Fe- 410 - W (Gde E-250) quality A For tying chain link fencing complete
S&F for TMT bars Mild steel bars 5 mm to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Complete .
M&L for Mild steel round bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binder, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete.
S&F for mild steel angle iron work as in doors frames, chajja hollow square sections conForming to 410W(Gde E-250) quality-B including fixing of holdfast, rungs, hinges etc complete
Fixing only chain link fencing including line wires, any mesh size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete.
Supply only chainlink fencing any size any type etc complete.
S&F for galvanized 2 stand barbed wire 2.24mm dia of wire with 2mm dia barbs at 75mm to 100mm spanning, staining and fixing to any type standard rail straining bolts incl securing or trying at crossing with and provision of galvanized MS wire complete.
S&F for Pressed steel frames for doors of size 125x60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete
S&F for powder coated anodised Aluminium alloy sections 3 track sliding shutters windows with frames Series-B (18 mm) and duly fitted with & including neoprene beading, glazing clips, two shutters tinted glass panes 4.80 mm nominal thickness one shutter with stainless steel wire cloth 0.36mm dia and average width of aperture 1.4mm, aluminium alloy handles, rubber packing, joining cleats, glazing clips, aluminium snap beading, locking arrangements etc. complete.
S&F for aluminium anodised powder coated ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and one portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary opening for exhaust fan if reqd and necessary channel frame work with rubber gasket and aluminium beading etc complete.
S&F for APP based polymeric membrane minimum weighing 3.00 KGS/sqm and minimum 3.00mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by torched application and applied two coats of Aluminium paint including rendering 10mm thick on concrete surfaces in CM 1:4 along with mixing of WPC and finally finished as per manufacturers instructions Complete (WPC will be measured and seperately)
M&L for 75mm thick Plinth Protection in PCC (1:3:6) using 20mm graded aggregate Complete
M&L for Plain Cement concrete 75 mm thick 1:4:8 type D2 (40mm graded aggregate) as in sub base Complete
M&L for Cement concrete 25mm thick 1:2:4 type B1(20mm graded aggregate) as in sub base Complete
M&L for Glazed colour ceramic walls tiles in vertical surfaces of size 350 x 250 x 7mm / 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including rendering backing coat on vertical surface of wall in 10mm thick CM 1:4 to receive wall tiles complete.
M&L for Non - skid Ceramic Coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.1 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl Screed bed or bedding layer of mortar 20mm thick in CM 1:6 Complete
M&L for Non - skid Ceramic Coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl Screed bed or bedding layer of mortar 20mm thick in CM 1:6 Complete
M&L for Non skid ceramic (colored), 7 to 8 mm thick area of each tile exceeding 0.18 Sqm but n exceeding 0 .38 Sqm, set and jointed in neat cement slurry and pointed in white or colored cement to match in vertical surfaces such as skirting over and including 10 mm thick backing coat in cement mortar 1:4 complete.
M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete
M&L for Rendering in two layers on other than fair faces of brick work or concrete surfaces 5 mm thick in CM 1:4 mixed with water proofing compound @ 3% by weight of cement over 10 mm thick rendering in CM 1:6 finished even and smooth without using extra cement complete. (WPC measured and paid separately)
M&L for rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete.
M&L for rendering 10mm thick in cement mortar 1:3 on fair faces of Ceiling concrete surfaces, finished even and smooth without using extra cement complete.
M&L for preparing new plastered surfaces of wall and applying two coats of oil bound distamper over a coat of 1 to 2mm (1.5mm average) thick wall care putty and one coat of alkali resistant primer complete.
M&L for preparation of new plastered surface and apply three Coats of white wash over ceiling Complete
M&L for preparation new plastered surfaces of external wall and applying two coats cement base paint over a coat of alkali resistant primer complete.
M&L Preparing new or previously untreated wood & wood based surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over & including a coat of pink primer complete.
M&L Preparing new or previously untreated steel & iron surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over & including a coat of red oxide primer complete.
M&L for preparation of new untreated steel and iron surfaces of any description, not exc. 10 cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat of red oxide primer complete
M&L for galvanized iron water tubing medium grade ISI marked with all fittings laid in trenches for the 20 mm bore complete.
S&F for steel tubes light grade galvanised with all fittings fixed to walls / floors / poles / road crossing etc of 40 mm bore complete.
S&F for 20mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete.
S&F for 15mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete.
Cutting existing steel tubing for alterations or aditions of pipe size 40/50 mm bore and screwing complete.
S&F for 500 ltrs rotational moulded polyethelene water storage tanks (cyclindrical vertical with closed top) incl connecting up pipes securing access covers etc Complete (Make : Sintex or Polycon).
S&F for Bib taps (long body) fancy type cast copper alloy, chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule all complete.
S&F for pillar taps, cast copper alloy with capston heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe 15mm bore Complete.
M&L for stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe 20 mm bore complete.
S&F for 15 mm bore angle cock with flage complete
S&F for stop valves fancy type cast copper alloy, chromium plated with long shank and cup (concealed type) for 15mm bore pipe, screwed both ends including necessary fittings such as sockets for pipe or for union all complete . .
M&L for gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe 50 mm bore complete.
S&F for 20 mm dia PVC ball cock (PVC float valves) complete high pressure with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed as required to use reducer and check nut Complete.
S&F for Grating doom 125 mm dia with waste hole of PTMT (Minimum weight 40gms) Complete
S&F for 15mm bore PVC Connection with PTMT nut of length 600 mm complete
S&F for PVC (SWR) pipes 110mm single socketed in any length with rubber ring joints fixed to wall/laid in trenches/consealed in floor Complete
S&F for PVC (SWR) pipes 75 mm single socketed in any length with rubber ring joints fixed to wall/laid in trenches/consealed in floor Complete
S&F for PVC bend/Elbow/Socket suitable for 110 mm Complete
S&F for PVC bend/Elbow/Socket suitable for 75 mm Complete
S&F for PVC vent cowl suitable for 110 mm Complete
S&F for Cast iron floor trap 75mm bore, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) Complete
S&F for Cast iron Nahani Traps 75mm bore, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) Complete
M&L for concrete cement 1:3:6 type C-2 to drain pipes including packing under and haunching against the sides of the pipes after they are laid and tested for 150mm internal dia of pipe complete
M&L for salt glazed stone ware 150 mm internal dia drain pipes grade `A’ laid in trenches and jointed completed.
S&F for Salt-glazed stoneware gully traps, square or round mouthed, type 'P' gully trap 150x100 Complete
Cutting into exisiting manhole for connecting new drains, making good to pipe rendering, cutting out exisitng benching for and forming branch channel (1/2 round or 3/4 section ) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching complete.
S&F for brass CP shower rose 125 mm size with or without swivel joint and fixing to steel pipe Complete
S&F for vitreous china wash down water closet pan (pedestral pattern), white including connection trap and to flushing pipe, anti-syphnoge pipe etc complete
S&F for 10 ltr capacity PVC flushing cistern low level white colour incl PVC connection PVC flush pipe of reqd length complete.
S&F for vitreous china wash basin, white, flat back, size 550x400m excluding taps, waste , chain & plug & porcelain stopper including brackets incl cutting for pinning in ends of bracketes or erecting stand and fixing and supply and waste pipe complete
S&F for PVC seat cover for pedestal pan, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminiumised hanging device complete.
S&F for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long Complete
S&F for Soap dish, vitreous China white, approximate size 160x160x90mm Complete
S&F for Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete
M&L for Point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel teRMTinal boxes of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators for One light point controlled by one switch complete
All as per item No 117 above but for One Ceiling/Ex/Venti fan point controlled by one switch.
All as per item No 117 above but for One socket outlet 6 amp controlled by one switch on the same board with other switches.
All as per item No 117 above but for One socket outlet 6 amp controlled by one switch on indepdendent board.
All as per Item No 117 above but for one 16 amp socket outlet for controlled by one switch on independent board with conductor cable 2.5 sqmm complete.
S&F for switch piano flush button single pole one way 6 amp complete.
S&F for switch piano flush button single pole one way 16 amp complete.
S&F for socket outlet 2 in 1, 3 pin 6 & 16 amp flush type complete.
S&F for socket outlet 2 in 1, 2 & 3 pin, 6 amp, flush type complete.
S&F for hum free electronic step fan regulator 120 - 280 volts of 100 watt capacity including connecting up complete.
S&F for ceiling rose 6 amp, 3 plates polycarbonate body complete.
M&L for submain wiring with 2x6 sqmm and earth continuity 1x6 sqmm conductor PVC insulated FR-LSH multistranded copper conductor cable (Phase - R,Y,B, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit medium grade 25 mm dia conduit ISI marked ivory colour along with accessories complete.
S&F for 20W LED batten (1.2 m) made of Aluminium housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 100+ lumens per watt and total power consumption not less than 20 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 & similar to Make Philips cat ref no. ENDURALED BATTEN " BN 108C LED 20S PSU CDL WH " complete.
M&L for earthing with galvanized steel earth plate electrode 600 x 600 x 6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15cm on all side and including connected to & including galvanized earth lead wire 4.0 mm dia upto 7.5 mtrs long by means of nuts and bolts, check nuts and washers of GI and connected to earhing test point and earth dolly all as shown in electrical plate No 3 of MES SSR part I and testing on completion including necessary excavation and earth work in any type of soil, PCC (1:3:6) type C1 chamber, pre-cast RCC slab 50mm thk in cement concrete (1:2:4) type B1 reinforced with welded steel wire fabric or XPM (weight not less than 4 Kg per Sqm) with cast iron frame, funnel with watering pipe 20mm dia medium grade, wire mesh and lugs, GI protection pipe 15mm dia medium grade 7.5 mtr long for protection of earth lead upto test point etc complete.
S&F for MCB distribution board SPN, 240 volts, 8 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces complete.
S&F for MCB distribution board ETPN, 415 volts 4 way powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43- IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces complete.
S&F for MCBs Single pole 6 to 16 amp as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs & similar to Make Legrand DX3 cat ref no. 408587 to 408592 complete.
S&F for MCBs Double pole 32 amp as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs & similar to Make Legrand DX3 cat ref no. 408636 complete.
S&F for in replacement MCBs Four pole 63 amp as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs & similar to Make Legrand DX3 cat ref no. 408702 complete
S&F for LED bulk head fitting 9 watt IP 66 & IK 09 with pressure diecast aluminum housing & polycarbonate diffuser duly prewired for connection with flexible multi stranded copper conductor cable as required all as per Philips cat ref no. WT202W LED6S CW PSU S1 PC or equivalent in Wipro or Bajaj or Havells as approved.
S&F for air ventilation fan 250 mm in toilet in rectangular in shape, PVC body, white colour 230V including louber shutter complete.
S&F for ceiling fans with blades, down rods, electronic regulator and accessories, 230 volts, 1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) complete
Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire aRMToured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 35 sqmm 3 1/2 core complete.
M&L for sand filling in trenches with clean dry fine sand unwashed including gently punning around cables complete.
Supplying and laying old size bricks, common burnt clay building bricks sub class 'B' designation 75 laid in trenches over sand for cable protection complete.
Horizontal boring holes in soil for road crossing and getting out and disposal of spoil to a distance n exc. 50 m for a pipe of dia 40 mm in size complete.
SNEH TRADERS
DMA PROJECTS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .