SALAM SAGAR BEAUTIFICATION DEVELOPMENT WORK POKARAN

Amount

P & F 1st qualityVitrified homogenous unglazed, uncoated, metal pressed,ready to install on floor4 and walls having fine machine cut edges with sand blast finish 300X300 mm 9 mm thickness with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete. 600mm X 600mm

Providing and Fixing of Stone Chattris of size (3X3X5 ) M in Jaisalmer stone or equivalent on 4 pillars of size 0.45M Dia. as per drawing including carving, cladding etc all including required DASA copings and all attached and fixing with SS clamps and fasterners with tenax chemical ,including Planning, developing, making base, carving work, polishing, all loading-unloading, transportation, scaffolding, hoisting, installation with all required T&P (including white cement, pigment, Chemical, SS clamps and fasteners of approved brand etc.), fixing over/on base/surface as per shape-size & placement of approved drawing , finishing, surface treatment etc. covering properly till the date of opening/inauguration of site etc. under the direction of engineer incharge and as per approval from Architect

Single piece of stone element with carving work in Jaisalmer stone or equivalent includes stone pillar, stone base, todies and thabi etc carving work as per direction of engineer in charge

Providing and fixing sand stone Dustbins in 100 mm thick yellow sandstone with jali and carving properly shaped as per design of approved size, quality and standard specifications with removable metal bin inside properly fixed to stone body approved design pattern (shape) and specifications including c c 1 :2 :4 grouting, all materials, labor and T & P etc. required for proper completionof work as directed by engineer - in -charge.

Providing and fixing sand stone Sinnage in 100 mm thick yellow sandstone with jali and carving properly shaped as per design of approved size, quality and standard specifications as per approved design pattern (shape) and specifications including c c 1 :2 :4 grouting, all materials, labor and T & P etc. required for proper completion of work as directed by engineer - in -charge.

All Weather Landscape Loudspeakers- : with all necessary accessories to comply the installation: Supply , installation , testing and commissioning of Full-range environmental rated (IP35 or better) In Ground or Above ground Landscape PA/Music loudspeaker with one downward firing 4.5" (114 mm) advance composite environmental full-range driver. Domed port grille for clear, consistent sound quality, The Speaker shall have a line voltage-matching (stepdown) transformer with taps at 80 watts or better. The nominal dispersion of the loudspeaker shall be 360° horizontal and 50° vertical at least.

Rated Input 15 W,Line Voltage 100 V line or 70 V line, Rated Impedance 100 V line: 670 Ω (15 W), 1 kΩ (10 W), 2 kΩ (5 W), 3.3 kΩ (3 W),70 V line: 330 Ω (15 W), 670 Ω (7.5 W), 1 kΩ (5 W), 2 kΩ (2.5 W), 3.3 kΩ (1.5 W), Sound Pressure Level 112 dB (1 W, 1 m at 500 Hz to 2.5 kHz peak level) Frequency Response 280 Hz - 12.5 kHz, Dust/Water Protection IP65, Polarity Hot: Black, Com: White, Operating Temperature -20 ℃ to +55 ℃ (must be free from dew condensation), Finish Horn flare: Aluminum, off-white, powder coating, Reflector horn and rear cover: ABS resin, off-white, Bracket, Screws and bolts: Stainless steel Speaker cable: Polyvinyl chloride insulated cabtyre cable ,(6 mm in diameter, 600 mm in length), Dimensions 222 (W) × 179 (H) × 234 (D) mm ,Weight 1.3 kg, Option Swivel bracket: YS-151S (Can be used instead of the supplied bracket.)

Digital Networked Power Amplifier with all necessary accessories to comply the installation Supply, installation, testing & Comissioning of 4 channel class D Power amplifier with a Max Output Power of 4x500W@4/8 ohms, or bridged mode output power of 2 x 500W @ 8 ohms/70/100V. 20Hz - 20 KHz, SNR of 101dB and THD + N of <0.4% with built in protection such as Limiters, Temperature, DC, Short Circuit, Peak Current Limiters, Turn on delay etc. Built in DSP for Matrix routing, Speaker equalization, Delays, Array EQs etc. The Damping factor shall be >5000. The amplifier shall implement Dual Voltage and Current feedback technology to provide power as per the load demand. Shall offer optional Network audio connectivity (Dante or CobraNet) through expansion slot. Warranted for at least 5 years. Approved Makes: PowerSoft/QSC/Bose

"Audio Player Versatile DAB+ and FM RDS / CD / USB / SD-card /Bluetooth music source, RS232 control, IR remote included, 1U, 19"" Supply, installation, testing and commissioning of professional multisource CD/USB/SD-card music player with unbalanced outputs 2 x RCA + COMBI RCA, integrated FM RDS and tuner with RS232 control, IR remote included, rack mountable.Approved Makes: Biamp /Symetrix /Ashly Audio

Supply, installation, testing and commissioning of Speaker Cable: 2 core 2.5 sq mm Armoured cable conduction loudspeaker cable.

Supply, installation, testing and commissioning of Speaker Cable: 2 core 4 sq mm Armoured cable conduction loudspeaker cable.

Supplying and fixing at site, Bronze metal alloy (88% copper, 8% tin and 4% zinc ) sculpture including planning, developing, casting all loading and unloading, transportation, scaffolding , hoisting istallation with all reuired T& P, fixing over / on base / surface as per shape size and placement as per approved drawing , finishing, surface treatment etc. covering properly till the date of opening / iaaguration of site etc. Modelling 3D scanning of model robotic machining ( enlargement of model to desired height), assembling and final detaling, piece moulding , wax casting (loss wax process), wax chasing, sprung investing, metal casting, divesting, metal chasing bronze/ welding. finishing and patina colour etc. complete job in all respect as per approved dwsign and drawing under approva of project consultant appointed for the projecvt and as per directions of enginner in charge. Theme concept plan schematic arrangemnt other relevant details and drawing of element / statue / sculpture are enclosed. the final drawing shall be provided after the award of the work Note payment shalll be made per kg of the finished sculpture final payment shall be paid after test result of compostion of variation in composition of alloy metal observed the rate shall be paid accordingly). Other masonry , concereting steel reinforcement plastering etc. required shall be paid extra but additional support if required for bronze metal alloy sculpture, shall be of stainless steel/ zinc coated iron steel etc. for which nothing shall be paid extra.

Supplying and fixing at site, fiber reinforced polymer sculpture including planning, developing, casting all loading and unloading, transportation, scaffolding , hoisting istallation with all reuired T& P, fixing over / on base / surface as per shape size and placement as per approved drawing , finishing, surface treatment etc. covering properly till the date of opening / iaaguration of site etc. Modelling 3D scanning of model robotic machining ( enlargement of model to desired height), assembling and final detaling, piece moulding , wax casting (loss wax process), etc . finishing and PU/ patina colour etc. complete job in all respect as per approved dwsign and drawing under approva of project consultant appointed for the projecvt and as per directions of enginner in charge. Theme concept plan schematic arrangemnt other relevant details and drawing of element / statue / sculpture are enclosed. the final drawing shall be provided after the award of the work

Providing and installation of Merry go round :- Providing and fixing of Merry go round its required area 3.0 mtr. X 3.0 mtr. Total height 0.9 mtr. From ground level. The pure polyester powder coating (over baked) done on the pipe extend the life of equipments. And install by C.C. base system as per order by engineer in charge age capacity 14 years and seating capacity 6 childs

Providing and installation of Dome Climber :- Providing and fixing of Dome Climber its required area 3.6 mtr. X 3.6 mtr. Total height 1.8 mtr. From ground level. The pure polyester powder coating (over baked) done on the pipe extend the life of equipments and seating capacity 6 childs

Providing and installation of Triple Wave Slide :- Providing and fixing of Triple Wave Slide with Platform Canopy its required area 6.0 mtr. X 3.0 mtr. Total height 2.5 mtr. From ground level. The pure polyester powder coating (over baked) done on the pipe extend the life of equipments and Child age up to 14 years.

Providing and installation of Sea Saw :- Providing and fixing of Portable Sea Saw Double seater its required area 2.4 mtr. X 1.20 mtr. Total height 0.9 mtr. From ground level. The pure polyester powder coating (over baked) done on the pipe extend the life of equipments and Child age up to 14 years.

Providing and installation of Multi Play System :- Providing and fixing of Multi play system with Spiral Slide - 2 nos. , Straight Fiber Slide - 2 nos., Big Tunnel Slide - 1 nos., Article Swing - 1 nos. , Aluminium Platform with Canopy - 3 nos., Straight Bridge - 1 Nos. Step Ladder - 2 Nos. its required area 6.0 mtr. X 9.0 mtr. The pure polyester powder coating (over baked) done on the pipe extend the life of equipments.

Providing and installation of Portable Swing :- Providing and fixing of Portable Swing its required area 4.5 mtr. X 3.0 mtr and Total height is 1.8 mtr. The pure polyester powder coating (over baked) done on the pipe extend the life of equipments.

Providing and installation of Hanging Tree:- Capacity-4 children

Providing and installation of Spiral FiberSlide:- Model-Spiral fibre slide, height:- 7 feet (approx.),use age upto 14 years , Required area "- 20 x 10 ft

Air Walker: Providing, designing and fixing of Air-Walker of size 1100 x 550 x 1480mm fabricated with main post of 114mm dia and 2.5mm thick and other pipes of 40mm dia 2.5 mm thick made up of hot rolled tubular steel and hot dipped galvanized and powder coated 80-120 micron thick using. Akzo Nobel or equivalent in desired shade and colour. All welding joints of pipe shall be robotic welded with Joints scalloped as necessary and dressed off removing sharp edges and burrs Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover shall be made of virgin LLDPE plastic by rotational molding with minimum 3mm thickness, UV resistant and colour as approved by Engineer in charge. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipments manufactured by reputed company duly oil sealed and self lubricated to be approved by Engineer-in-charge. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, all complete as per directions and approval of Engineer-in charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc (the cement concrete and excavation work shall be paid separately).

Sit Up Station: Providing, designing and fixing of double sit-up station of size 1500 x 1150 x 650mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe of 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Seat and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 3mm, colorful and UV resistant and environmental friendly. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipments on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base pedal) and fixing of equipments etc. (the cement concrete and excavation work shall be paid separately).

Air Swing: Providing, designing and fixing of Air-Walker of size 1150 x 900 x 1250mm fabricated with main post of 114mm dia and 2.5mm thick and rest of pipes of 40mm dia 2.5 mm thick all pipe made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All joints of pipe are robotic welded with Joints scalloped as necessary and dressed off removing sharp edges and burrs Zinc primer paint to be applied at all the welding points prior to finishing. Pedals shall be made of Nylon alloy with rounded edges to prevent any impact of injury and base plate cover to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic of 3mm colorful and UV resistant and enviromental friendly. Bearing used shall be maintance free dully oil sealed and self lubricated made by reputed company to be aproved by Engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movements. All open ends of pipe to be closed by GI/LLDPE caps for user safety. The equipment shall be fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate All complete as per directions and approval of Engineer-in charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc (the cement concrete and excavation work shall be paid separately).

Horse rider station: Providing designing and fixing of horse rider station of size 1000x600x1100 mm fabricated with main post of 114mm die and 2.5mm thick and rest of the pipe 40mm die and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped gaivanized and powder coated using. Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Seat and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 3mm, colorful and UV resistant and environmental friendly. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipments on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base pedal) and fixing of equipments etc. (the cement concrete and excavation work shall be paid separately).

Stair Stepper : Providing desiging and fixing of stair stepper in a and single step of size 1000x600x1400 mm fabricated with main post of 114 mm die and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped gaivanized and powder coated using. Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Seat and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 3mm, colorful and UV resistant and environmental friendly. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipments on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base pedal) and fixing of equipments etc. (the cement concrete and excavation work shall be paid separately).

Leg Press : Providing desiging and fixing of leg press of size 2000x550x1600mm fabricated with main 114 mm die and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped gaivanized and powder coated using. Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars to be provided with high qualit grip ruber on top end. Pedals shall be made up of Nylon alloy with rounded edge to prevent any impact of injury. Seat and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 3mm, colorful and UV resistant and environmental friendly. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipments on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base pedal) and fixing of equipments etc. (the cement concrete and excavation work shall be paid separately).

Exercising bar : Providing desiging and fixing of exercising bar in a pair of size 1800x550x1700mm fabricated with main 114 mm die and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped gaivanized and powder coated using. Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars to be provided with high qualit grip ruber on top end. Base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 3mm, colorful and UV resistant and environmental friendly. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipments on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base pedal) and fixing of equipments etc. (the cement concrete and excavation work shall be paid separately).

Seated chest press : Providing desiging and fixing of seated chest press of size 1800x700x2000mm fabricated with main 114 mm die and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped gaivanized and powder coated using. Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars to be provided with high qualit grip ruber on top end. Pedals shall be made up of Nylon alloy with rounded edge to prevent any impact of injury. Seat and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 3mm, colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free dully oil sealed and self lubricted made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiter to prevent unwanted movement. All open ends of pipe to be closed by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipments on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base pedal) and fixing of equipments etc. (the cement concrete and excavation work shall be paid separately).

Arm Whell : Providing desiging and fixing of arm wheel press of size 850x800x1800mm fabricated with main 114 mm die and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped gaivanized and powder coated using. Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars to be provided with high qualit grip ruber on top end. Pedals shall be made up of Nylon alloy with rounded edge to prevent any impact of injury. Seat and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 3mm, colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free dully oil sealed and self lubricted made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiter to prevent unwanted movement. All open ends of pipe to be closed by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipments on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base pedal) and fixing of equipments etc. (the cement concrete and excavation work shall be paid separately).

Eilliptical exerciser : Providing desiging and fixing of Eilliptical exerciser of size 1200x540x1600mm fabricated with main 114 mm die and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped gaivanized and powder coated using. Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars to be provided with high qualit grip ruber on top end. Pedals shall be made up of Nylon alloy with rounded edge to prevent any impact of injury. Seat and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 3mm, colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free dully oil sealed and self lubricted made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiter to prevent unwanted movement. All open ends of pipe to be closed by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipments on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base pedal) and fixing of equipments etc. (the cement concrete and excavation work shall be paid separately).

Double cross walker : Providing desiging and fixing ofDouble cross walker of size 1600x600x1600mm fabricated with main 114 mm die and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped gaivanized and powder coated using. Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars to be provided with high qualit grip ruber on top end. Pedals shall be made up of Nylon alloy with rounded edge to prevent any impact of injury. Seat and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 3mm, colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free dully oil sealed and self lubricted made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiter to prevent unwanted movement. All open ends of pipe to be closed by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipments on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base pedal) and fixing of equipments etc. (the cement concrete and excavation work shall be paid separately).

Rowing machine : Providing desiging and fixing of Rowing machine of size 1280x800x1150mm fabricated with main 114 mm die and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped gaivanized and powder coated using. Akzo Nobel or equivalent of 80 - 120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars to be provided with high qualit grip ruber.Foothold shall be made up of nyion alloy with rounded edges to prevent any impact or injury and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 3mm, colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free dully oil sealed and self lubricted made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiter to prevent unwanted movement. All open ends of pipe to be closed by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipments on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base pedal) and fixing of equipments etc. (the cement concrete and excavation work shall be paid separately).

Excavation holes more than 0.10 cum & upto 0.5 cum including getting out the excavating soil, then returning the soil as required in layers not exceeding 20 cm in depth including consoildating each deposited layer by within a lead of 50 m and lift upto 1.5 m. a. All kind of soil

Supply and planting following in poly bags / earthen pots well branched, well established & free from disease of 600 mm min. height shurbs at site in 0.45 m dia holes, 0.45 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, backfilling the hole watering etc as required. Cestrum nocturnum

Tecoma gaudichaudi

Murraya exotica

jatrofa dorf -3' feet

techoma stans -3' feet

Plumeria rubra( singapuri Champa) - 3' feet

Murraya paniculata -3' feet

Thuja occidentalis -3' feet

ficus benjamina

Nerium Oleander drwaf

Supply and planting following species best quality container grown healthy trees of 2 mt. min. height, well established & free from disease at site in 0.90 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, backfilling the hole watering etc as required. Cassia fistula

Ficus religiosa

Ficus benghalensis

Largerstomea speciosa

Putranjiva roxburghii

Terminalia arjun

Cassia Siamea

Pongamia pinnata

Nerium oleander

Tabebunia roseta

Acacia arabica

Dalbergia sissoo

Millingtonia hortensis

Terminalia arjuna

Neolamarcika cadamba

Nyctanthes arbor-tristis

Boswellia serrata

Schleichera trijuga

Mimusops elengii

Albizzia lebbeck

Bidder Name

Amount

SUNMAX CORPORATION(GSTN-29AKJPP5104H1Z1)

SHRI BALAJI NURSARI(GSTN-08BIUPS8153F2ZI)

SUNMAX CORPORATION

SUNMAX CORPORATION